CERN Accelerating science

Published Articles
Title First Double-Sided End-Cap Strip Module for the ATLAS High-Luminosity Upgrade
Author(s) Wiik-Fuchs, Liv Antje Mari (Freiburg U.) ; Parzefal, Ulrich (Freiburg U.) ; Garcia Argos, Carlos (Freiburg U.) ; Hauser, Marc (Freiburg U.) ; Jakobs, Karl (Freiburg U.) ; Mahboubi, Kambiz (Freiburg U.) ; Rodriguez, Arturo Rodriguez (Freiburg U.) ; Prahl, Volker (DESY) ; Ruehr, Frederik (Freiburg U.) ; Alvarez, Dario Eliecer Arziza (DESY) ; Bloch, Ingo (DESY) ; Cornell, Sergio Diez (DESY) ; Gregor, Ingrid-Maria (DESY)
Publication SISSA, 2019
Number of pages 5
In: PoS TWEPP2018 (2019) 015
In: Topical Workshop on Electronics for Particle Physics, Antwerp, Belgique, 17 - 21 Sep 2018, pp.015
DOI 10.22323/1.343.0015
Subject category Detectors and Experimental Techniques
Accelerator/Facility, Experiment CERN LHC ; ATLAS
Abstract The ATLAS Experiment will upgrade its inner tracking system for the High-Luminosity-LHCwith an all-silicon system. The strip part will be based on individual modules, constructed bygluing the front-end hybrids directly onto the strip side of the sensors. These modules will thenbe glued onto a low-mass carbon-fibre based local support structure with integrated services.This paper presents the first double-sided module made from full-size end-cap sensors by gluing modules onto a reduced-size core. A summary on the experience gained in the prototyping process and results obtained from running this module, with emphasis on signal integrity and noise performance will be given.
Copyright/License Publication: (License: CC-BY-NC-ND-4.0)

Corresponding record in: Inspire


 Journalen skapades 2020-02-20, och modifierades senast 2020-03-04