CERN Accelerating science

Published Articles
Title Comparison of Cold Powering Performance of 2-m-Long Nb3Sn 11 T Model Magnets
Related titleComparison of Cold Powering Performance of 2-m-Long Nb3Sn 11 T Model Magnets
Author(s) Willering, Gerard (CERN) ; Bajko, Marta (CERN) ; Bajas, Hugues (CERN) ; Bordini, Bernardo (CERN) ; Bottura, Luca (CERN) ; Feuvrier, Jerome (CERN) ; Fiscarelli, Lucio (CERN) ; Izquierdo Bermudez, Susana (CERN) ; Loffler, Christian (CERN) ; Mangiarotti, Franco (CERN) Zeige alle 14 Autoren
Publication 2018
Number of pages 5
In: IEEE Trans. Appl. Supercond. 28 (2018) 4007205
In: 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4007205
DOI 10.1109/TASC.2018.2804356
Subject category Accelerators and Storage Rings
Abstract For the upgrade of the LHC, two 15-m NbTi main dipole magnets are foreseen to be replaced by two 11 T 5.7-m-long Nb3Sn dipoles each. A series of model magnets has been produced to verify the design choices that are important for the prototype and series production, focusing on mechanical aspects and protection studies. A fourth and a fifth 2-m single aperture models were produced, assembled, and tested. In this paper, the cold powering tests of the single aperture models SP104 and SP105 will be presented and the results will be compared with the previous models. Special attention will be given to the upper limit in magnet current due to quenches in the midplane turns.

Corresponding record in: Inspire


 Datensatz erzeugt am 2018-04-05, letzte Änderung am 2018-04-05



  • Send to ScienceWise.info