| Higher Order Modes Simulation and Measurements for 2400 MHz Cavity (p. 1394) |
| by Shashkov, Ya V |
| Crab cavity and cryomodule development for HL-LHC (FRBA02) |
| by Carra, Federico |
| SRF for Future Circular Colliders (FRBA04) |
| by Calaga, Rama |
| High flux three dimensional heat transport in superfluid helium and its application to a trilateration algorithm for quench localization with OSTs (MOPB049) |
| by Junginger, Tobias |
| CERN’s bulk niobium high gradient SRF programme: developments and recent cold test results (MOPB074) |
| by Macpherson, Alick |
| Mode sensitivity analysis of 704.4 MHz superconducting RF cavities (MOPB078) |
| by Papke, Kai |
| Cathode geometry and flow dynamics impact on vertical electropolishing of superconducting niobium cavities (MOPB100) |
| by Ferreira, Leonel |
| First results of SRF cavity fabrication by electro-hydraulic forming at CERN (THAA05) |
| by Atieh, Said |
| A higher harmonic cavity at 800 MHz for HL-LHC (THPB017) |
| by Roggen, Toon |
| Bead-pull measurements of the main deflecting mode of the double-quarter-wave cavity for the HL-LHC (THPB019) |
| by Navarro-Tapia, Maria |
| Design of a compact superconducting crab-cavity for LHC using Nb-on-Cu-coating technique (THPB048) |
| by Grudiev, Alexej |
| Performance evaluation of HL-LHC crab cavity prototypes in a CERN vertical test cryostat (THPB050) |
| by Hernández-Chahín, Karim |
| Thermal losses in couplers and ports of a SPS Double-Quarter Wave Crab Cavity (THPB052) |
| by Verdú-Andrés, Silvia |
| Electromagnetic Design of 400 MHz RF-Dipole Crabbing Cavity for LHC High Luminosity Upgrade (THPB053) |
| by De Silva, Subashini |
| Development of SRF cavity tuners for CERN (THPB060) |
| by Artoos, Kurt |
| Engineering design and prototype fabrication of HOM couplers for HL-LHC crab cavities (THPB069) |
| by Zanoni, Carlo |
| Design of Dressed Crab Cavities for the HL-LHC Upgrade (THPB070) |
| by Zanoni, Carlo |
| FPC and HOM Coupler Test Boxes for HL-LHC Crab Cavities (THPB081) |
| by Tutte, Adam |
| Status of the SRF systems at HIE-ISOLDE (TUBA01) |
| by Venturini Delsolaro, Walter |
| On the understanding of Q-slope of niobium thin films (TUBA03) |
| by Aull, Sarah |
| Developments on SRF coatings at CERN (TUPB027) |
| by Sublet, Alban |
| Material quality & SRF performance of Nb films grown on Cu via ECR plasma energetic condensation (TUPB029) |
| by Valente-Feliciano, Anne-Marie |
| Low energy muon spin rotation and point contact tunneling applied to niobium films for SRF cavities (TUPB042) |
| by Junginger, Tobias |
| Secondary electron yield of SRF materials (TUPB050) |
| by Aull, Sarah |
| Development of Nb$_3$Sn coatings by magnetron sputtering for SRF cavities (TUPB051) |
| by Rosaz, G. |
| HTS coatings for impedance reduction of beam-induced RF image currents in the FCC (TUPB052) |
| by Calatroni, Sergio |
| Characterization of thin films using local magneometer (TUPB058) |
| by Katyan N. |
| Design and first measurements of an alternative calorimetry chamber for the HZB quadrupole resonator (TUPB067) |
| by Keckert, Sebastian |
| The multipacting study of niobium sputtered high-beta quarter-wave resonators for HIE-ISOLDE (TUPB076) |
| by Zhang, Pei |
| The influence of cooldown conditions at transition temperature on the quality factor of niobium sputtered quarter-wave resonators for HIE-ISOLDE (TUPB077) |
| by Zhang, Pei |
| Diagnostic developments at CERN’s SRF testing facility (TUPB080) |
| by Macpherson, Alick |
| Design of the thermal and magnetic shielding for the LHC High Luminosity Crab-Cavity upgrade (TUPB101) |
| by Templeton, Niklas |
| First HIE-ISOLDE cryo-module assembly at CERN (TUPB106) |
| by Therasse, Mathieu |
| Development of a test bench to prepare the assembly of the IFMIF LIPAC cavity string (TUPB107) |
| by Bazin, Nicolas |
| Commissioning results of the HZB quadrupole resonator (WEA1A04) |
| by Kleindienst, Raphael |
Conference home page