| Article | |
| Title | Characterization of a nondestructive beam profile monitor using luminescent emission |
| Author(s) | Variola, A (CERN) ; Jung, R (CERN) ; Ferioli, G (CERN) |
| Publication | 2007 |
| In: | Phys. Rev. Spec. Top. Accel. Beams 10 (2007) 122801 |
| DOI | 10.1103/PhysRevSTAB.10.122801 |
| Subject category | Accelerators and Storage Rings |
| Abstract | The LHC (large hadron collider) [LHC study group: LHC. The large hadron collider conceptual design; CERN/AC/95-05] is the future p-p collider under construction at CERN, Geneva. Over a circumference of 26.7 km a set of cryogenic dipoles and rf cavities will store and accelerate proton and ion beams up to energies of the order of 7 TeV. Injection in LHC will be performed by the CERN complex of accelerators, starting from the source and passing through the linac, the four booster rings, the proton synchrotron (PS), and super proton synchrotron (SPS) accelerators. One of the main constraints on LHC performance is emittance preservation along the whole chain of CERN accelerators. The accepted relative normalized emittance blowup after filamentation is ±7%. To monitor the beam and the emittance blowup process, a study of different prototypes of nonintercepting beam profile monitors has been performed. In this context a monitor using the luminescent emission of gases excited by ultrarelativistic protons (450 GeV) was developed and tested in the SPS ring. The results of beam size measurements and their evolution as a function of the machine parameters are presented. The image quality and resolution attainable in the LHC case have been assessed. A first full characterization of the luminescence cross section, spectrum, decay time, and afterglow effect for an ultrarelativistic proton beam is provided. Some significant results are also provided for lead ion beams. |
| Copyright/License | Publication: (License: CC-BY-3.0) |
Corresponding record in: Inspire
Registre creat el 2008-02-06, darrera modificació el 2018-09-24
