Freestanding L-Shaped Partition Wall With Door - 7' / 9' / 9'

Whether you need a home office, study room, guest bedroom, or just some added privacy, you can have it all with no tools, contractors, or hassle. All panels, connectors, and caps are included, along with the framed accordion door.The Freestanding L-Shaped Room Kit is only as permanent as you want it to be, with no drilling required! Your new temporary wall is completely freestanding, with 12" wide anchor panels at each open end to keep it stable and secure. The only tool needed is a drill to attach the accordion door to the frame. What's Included Wall & Anchor Panels Our signature Wall and Anchor Panels are 3" thick and made of Moisture and Impact Resistant Fiberglass. These panels are easily assembled and snap together using Lug and 2-Way Connectors for a stable and secure fit. This freestanding wall kit is stabilized with 1ft wide anchor panels attached to each end of the wall. Accordion Door KitThe included accordion door kit is 36" wide with a maximum opening of 30".It includes a specialized lintel piece with a track that allows the door to be easily assembled and installed on our modular walls. The door kit includes a double-sided handle, and an integrated magnet to hold the door in position when closed.Note that by default the door is placed in the most economical position along the wall's width. For questions about door placement and customizations, send us a message and our team will be happy to help you out. Lug and 2-Way ConnectorsIncluded connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly. Finishing CapsFinishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! For walls above 6' in height, finishing caps for the top are not included. Extra finishing caps can be purchased from our Accessories. Before You Buy Before you buy, the most important thing to do is measure your ceiling height. Your ceiling must be at least 2" higher than the height of your partition. For example, if you're looking to buy an 8' partition, your ceiling must be at least 8'2". This allows you to assemble the partition comfortably and place it in your space. Without any clearance, you're at risk of not being able to assemble/install the partition at all, which we don't want! Do also make sure to check your floor for dips and bulges. Uneven flooring can impact the installation of your product. Once you've confirmed your ceiling height and ensured your floor is level, you're good to go. Door PositioningBy default doors are placed in the most economical position on the "width wall". If you have a preference for door placement, please reach out to us, and we can check if that is possible with your dimensions, or if we can do a custom order for you. Note that doors do need to have a least 1ft of wall panel on each side. Assembly Guides Our wall kits are designed to be completely DIY. Two people can typically assemble and install any of our wall kits in 90 minutes or less*, with little to no tools needed. Note that a drill and/or screwdriver is recommended for installing the accordion doors and mounting the wall kit to your existing walls. Video Assembly Guide (link) PDF Assembly Guide (link) If you have any questions regarding assembly feel free to give us a call on (855) 348-4330, email us at [email protected] or send us a chat right here on our website. We are available Monday-Friday 9AM to 5PM (est).*Depending on the size of your wall kit