-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Global calibration of large-scale photonic integrated circuits
Authors:
Jin-Hao Zheng,
Qin-Qin Wang,
Lan-Tian Feng,
Yu-Yang Ding,
Xiao-Ye Xu,
Xi-Feng Ren,
Chuan-Feng Li,
Guang-Can Guo
Abstract:
The advancing maturity of photonic integrated circuit (PIC) fabrication technology enables the high integration of an increasing number of optical components onto a single chip. With the incremental circuit complexity, the calibration of active phase shifters in a large-scale PIC becomes a crucially important issue. The traditional one-by-one calibration techniques encounter significant hurdles wi…
▽ More
The advancing maturity of photonic integrated circuit (PIC) fabrication technology enables the high integration of an increasing number of optical components onto a single chip. With the incremental circuit complexity, the calibration of active phase shifters in a large-scale PIC becomes a crucially important issue. The traditional one-by-one calibration techniques encounter significant hurdles with the propagation of calibration errors, and achieving the decoupling of all phase shifters for independent calibration is not straightforward. To address this issue, we propose a machine-learning approach for globally calibrating the large-scale PIC. Our method utilizes a custom network to simultaneously learn the nonlinear phase-current relations for all thermo-optic phase shifters on the PIC by minimizing the negative likelihood of the measurement datasets. Moreover, the reflectivities of all static beamsplitter components can also be synchronizedly extracted using this calibration method. As an example, a quantum walk PIC with a circuit depth of 12 is calibrated, and a programmable discrete-time quantum walk is experimentally demonstrated. These results will greatly benefit the applications of large-scale PICs in photonic quantum information processing.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
MoleculeCLA: Rethinking Molecular Benchmark via Computational Ligand-Target Binding Analysis
Authors:
Shikun Feng,
Jiaxin Zheng,
Yinjun Jia,
Yanwen Huang,
Fengfeng Zhou,
Wei-Ying Ma,
Yanyan Lan
Abstract:
Molecular representation learning is pivotal for various molecular property prediction tasks related to drug discovery. Robust and accurate benchmarks are essential for refining and validating current methods. Existing molecular property benchmarks derived from wet experiments, however, face limitations such as data volume constraints, unbalanced label distribution, and noisy labels. To address th…
▽ More
Molecular representation learning is pivotal for various molecular property prediction tasks related to drug discovery. Robust and accurate benchmarks are essential for refining and validating current methods. Existing molecular property benchmarks derived from wet experiments, however, face limitations such as data volume constraints, unbalanced label distribution, and noisy labels. To address these issues, we construct a large-scale and precise molecular representation dataset of approximately 140,000 small molecules, meticulously designed to capture an extensive array of chemical, physical, and biological properties, derived through a robust computational ligand-target binding analysis pipeline. We conduct extensive experiments on various deep learning models, demonstrating that our dataset offers significant physicochemical interpretability to guide model development and design. Notably, the dataset's properties are linked to binding affinity metrics, providing additional insights into model performance in drug-target interaction tasks. We believe this dataset will serve as a more accurate and reliable benchmark for molecular representation learning, thereby expediting progress in the field of artificial intelligence-driven drug discovery.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Artificial Intelligence for Neuro MRI Acquisition: A Review
Authors:
Hongjia Yang,
Guanhua Wang,
Ziyu Li,
Haoxiang Li,
Jialan Zheng,
Yuxin Hu,
Xiaozhi Cao,
Congyu Liao,
Huihui Ye,
Qiyuan Tian
Abstract:
Magnetic resonance imaging (MRI) has significantly benefited from the resurgence of artificial intelligence (AI). By leveraging AI's capabilities in large-scale optimization and pattern recognition, innovative methods are transforming the MRI acquisition workflow, including planning, sequence design, and correction of acquisition artifacts. These emerging algorithms demonstrate substantial potenti…
▽ More
Magnetic resonance imaging (MRI) has significantly benefited from the resurgence of artificial intelligence (AI). By leveraging AI's capabilities in large-scale optimization and pattern recognition, innovative methods are transforming the MRI acquisition workflow, including planning, sequence design, and correction of acquisition artifacts. These emerging algorithms demonstrate substantial potential in enhancing the efficiency and throughput of acquisition steps. This review discusses several pivotal AI-based methods in neuro MRI acquisition, focusing on their technological advances, impact on clinical practice, and potential risks.
△ Less
Submitted 9 June, 2024;
originally announced June 2024.
-
SynAsk: Unleashing the Power of Large Language Models in Organic Synthesis
Authors:
Chonghuan Zhang,
Qianghua Lin,
Biwei Zhu,
Haopeng Yang,
Xiao Lian,
Hao Deng,
Jiajun Zheng,
Kuangbiao Liao
Abstract:
The field of natural language processing (NLP) has witnessed a transformative shift with the emergence of large language models (LLMs), revolutionizing various language tasks and applications, and the integration of LLM into specialized domains enhances their capabilities for domain-specific applications. Notably, NLP has made significant strides in organic chemistry, particularly in predicting sy…
▽ More
The field of natural language processing (NLP) has witnessed a transformative shift with the emergence of large language models (LLMs), revolutionizing various language tasks and applications, and the integration of LLM into specialized domains enhances their capabilities for domain-specific applications. Notably, NLP has made significant strides in organic chemistry, particularly in predicting synthetic tasks, paving the way for the development of LLMs tailored to the organic chemistry field. In this work, we introduce SynAsk, a comprehensive organic chemistry domain-specific LLM platform developed by AIChemEco Inc. By finetuning an LLM with domain-specific data and integrating it with a chain of thought approach, SynAsk seamlessly accesses our knowledge base and advanced chemistry tools in a question-and-answer format. This includes functionalities such as a basic chemistry knowledge base, molecular information retrieval, reaction performance prediction, retrosynthesis prediction, chemical literature acquisition, and more. This novel methodology synergizes fine-tuning techniques with external resource integration, resulting in an organic chemistry-specific model poised to facilitate research and discovery in the field. Accessible via http://synask.aichemeco.com, SynAsk represents a significant advancement in leveraging NLP for synthetic applications.
△ Less
Submitted 13 June, 2024; v1 submitted 6 June, 2024;
originally announced June 2024.
-
High-Performance Ferroelectric Field-Effect Transistors with Ultra-High Current and Carrier Densities
Authors:
Seunguk Song,
Kwan-Ho Kim,
Rachael Keneipp,
Nicholas Trainor,
Chen Chen,
Jeffrey Zheng,
Joan M. Redwing,
Marija Drndić,
Roy H. Olsson III,
Deep Jariwala
Abstract:
Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of FeFETs can be limited by a charge imbalance between the ferroelectric layer and the channel, and for low-dimensional semiconductors, also by a high contact resistan…
▽ More
Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of FeFETs can be limited by a charge imbalance between the ferroelectric layer and the channel, and for low-dimensional semiconductors, also by a high contact resistance between the metal electrodes and the channel. Here, we report a significant enhancement in performance of contact-engineered FeFETs with a 2D MoS2 channel and a ferroelectric Al0.68Sc0.32N (AlScN) gate dielectric. Replacing Ti with In contact electrodes results in a fivefold increase in on-state current (~120 uA/um at 1 V) and on-to-off ratio (~2*10^7) in the FeFETs. In addition, the high carrier concentration in the MoS2 channel during the on-state (> 10^14 cm^-2) facilitates the observation of a metal-to-insulator phase transition in monolayer MoS2 permitting observation of high field effect mobility (> 100 cm^2V^-1s^-1) at cryogenic temperatures. Our work and devices broaden the potential of FeFETs and provides a unique platform to implement high-carrier-density transport in a 2D channel.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Two-Plasmon-Decay Instability Stimulated by a Normal- and Large-Angle-Incidence Laser Pair
Authors:
C. -W. Lian,
Y. Ji,
R. Yan,
J. Li,
S. -H. Cao,
C. Ren,
L. -F. Wang,
Y. -K. Ding,
J. Zheng
Abstract:
The two-plasmon-decay instability (TPD) is a critical target preheating risk in direct-drive inertial confinement fusion. In this paper, TPD collectively driven by a normal-incidence laser beam (Beam-N) and a large-angle-incidence laser beam (Beam-L) is investigated via particle-in-cell simulations. Significant TPD growth is found able to develop in this regime at previously unexpected low laser i…
▽ More
The two-plasmon-decay instability (TPD) is a critical target preheating risk in direct-drive inertial confinement fusion. In this paper, TPD collectively driven by a normal-incidence laser beam (Beam-N) and a large-angle-incidence laser beam (Beam-L) is investigated via particle-in-cell simulations. Significant TPD growth is found able to develop in this regime at previously unexpected low laser intensities if the intensity of Beam-L exceeds the large-angle-incidence threshold. Both beams contribute to the growth of TPD in a "seed-amplification" manner where the absolute instability driven by Beam-L provides the seeds that get convectively amplified by Beam-N, making TPD energetically important and causing significant pump depletion and hot electron generation.
△ Less
Submitted 12 May, 2024;
originally announced May 2024.
-
Self-generated magnetic field in three-dimensional ablative Rayleigh-Taylor instability
Authors:
Dehua Zhang,
Xian Jiang,
Tao Tao,
Jun Li,
Rui Yan,
De-Jun Sun,
Jian Zheng
Abstract:
The self-generated magnetic field in three-dimensional (3D) single-mode ablative Rayleigh-Taylor instabilities (ARTI) relevant to the acceleration phase of a direct-drive inertial confinement fusion (ICF) implosion is investigated. It is found that stronger magnetic fields up to a few thousands of T can be generated by 3D ARTI than by its two-dimensional (2D) counterpart. The Nernst effects signif…
▽ More
The self-generated magnetic field in three-dimensional (3D) single-mode ablative Rayleigh-Taylor instabilities (ARTI) relevant to the acceleration phase of a direct-drive inertial confinement fusion (ICF) implosion is investigated. It is found that stronger magnetic fields up to a few thousands of T can be generated by 3D ARTI than by its two-dimensional (2D) counterpart. The Nernst effects significantly alter the magnetic fields convection and amplify the magnetic fields. The scaling law for the magnetic flux obtained in the 2D simulations performs reasonably well in the 3D cases. While the magnetic field significantly accelerates the bubble growth in the short-wavelength 2D modes through modifying the heat fluxes, the magnetic field mostly accelerates the spike growth but has little influence on the bubble growth in 3D ARTI.
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
Multi-State, Ultra-thin, BEOL-Compatible AlScN Ferroelectric Diodes
Authors:
Kwan-Ho Kim,
Zirun Han,
Yinuo Zhang,
Pariasadat Musavigharavi,
Jeffrey Zheng,
Dhiren K. Pradhan,
Eric A. Stach,
Roy H. Olsson III,
Deep Jariwala
Abstract:
The growth in data generation necessitates efficient data processing technologies to address the von Neumann bottleneck in conventional computer architecture. Memory-driven computing, which integrates non-volatile memory (NVM) devices in a 3D stack, is gaining attention, with CMOS back-end-of-line (BEOL) compatible ferroelectric (FE) diodes being ideal due to their two-terminal design and inherent…
▽ More
The growth in data generation necessitates efficient data processing technologies to address the von Neumann bottleneck in conventional computer architecture. Memory-driven computing, which integrates non-volatile memory (NVM) devices in a 3D stack, is gaining attention, with CMOS back-end-of-line (BEOL) compatible ferroelectric (FE) diodes being ideal due to their two-terminal design and inherently selector-free nature, facilitating high-density crossbar arrays. Here, we demonstrate BEOL-compatible, high-performance FE-diodes scaled to 5, 10, and 20 nm FE Al0.72Sc0.28N/Al0.64Sc0.36N films. Through interlayer (IL) engineering, we show substantial improvements in the ON/OFF ratios (>166 times) and rectification ratios (>176 times) in these scaled devices. The superlative characteristics also enables 5-bit multi-state operation with a stable retention. We also experimentally and theoretically demonstrate the counterintuitive result that the inclusion of an IL can lead to a decrease in the ferroelectric switching voltage of the device. An in-depth analysis into the device transport mechanisms is performed, and our compact model aligns seamlessly with the experimental results. Our results suggest the possibility of using scaled AlxSc1-xN FE-diodes for high performance, low-power, embedded NVM.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
Universal Non-equilibrium Response Theory Beyond Steady States
Authors:
Jiming Zheng,
Zhiyue Lu
Abstract:
Fluctuation-dissipation relations elucidate the response of near-equilibrium systems to environmental changes, with recent advances extending response theory to non-equilibrium steady states. However, a general response theory for systems evolving far from steady states has remained elusive. Using information geometry of stochastic trajectory probabilities, we derive universal thermodynamic bounds…
▽ More
Fluctuation-dissipation relations elucidate the response of near-equilibrium systems to environmental changes, with recent advances extending response theory to non-equilibrium steady states. However, a general response theory for systems evolving far from steady states has remained elusive. Using information geometry of stochastic trajectory probabilities, we derive universal thermodynamic bounds on both linear and nonlinear responses of Markov systems to environmental changes, applicable across all non-equilibrium regimes. This theory establishes a new paradigm in non-equilibrium statistical mechanics, offering a unified perspective on the responsiveness of non-stationary systems to external control and environmental changes. Applicable to systems ranging from biological sensory processes to engineered responsive materials, our framework paves the way for understanding and designing complex responsiveness in far-from-equilibrium stochastic systems.
△ Less
Submitted 9 August, 2024; v1 submitted 16 March, 2024;
originally announced March 2024.
-
Low-loss multilevel operation using lossy PCM-integrated silicon photonics
Authors:
Rui Chen,
Virat Tara,
Jayita Dutta,
Zhuoran Fang,
Jiajiu Zheng,
Arka Majumdar
Abstract:
Chalcogenide phase-change materials (PCMs) offer new paradigms for programmable photonic integrated circuits (PICs) thanks to their zero static energy and significant refractive index contrast. However, prototypical PCMs, such as GeSbTe (GST), are lossy in their crystalline phase, albeit transparent in the amorphous state. Moreover, electrically switching PCMs to intermediate states is a stochasti…
▽ More
Chalcogenide phase-change materials (PCMs) offer new paradigms for programmable photonic integrated circuits (PICs) thanks to their zero static energy and significant refractive index contrast. However, prototypical PCMs, such as GeSbTe (GST), are lossy in their crystalline phase, albeit transparent in the amorphous state. Moreover, electrically switching PCMs to intermediate states is a stochastic process, limiting programming accuracy. As a result, achieving both low-loss and deterministic multi-level operation with GST remains challenging. Although low-loss PCMs, such as Sb2S3 and Sb2Se3, have been discovered in recent years, they are much less technologically mature. In this work, we propose a design with multiple GST segments to overcome the challenge of deterministic multilevel operation. GST segments are individually controlled by interleaved silicon PIN diode heaters in a binary but reliable fashion, and multiple levels are encoded in their phase sequence. A 1 x 1 programmable unit with two unequal GST segments is experimentally demonstrated, showcasing four distinct operation levels and negligible thermal crosstalk with only one pair of metal contacts. We then extend the design to 1 x 2 and 2 x 2 programmable units. For the 2 x 2 programmable unit design, we propose a phase-detuned three-waveguide directional coupler structure to mitigate the absorption and radiation loss, showing < -1.2 dB loss and three splitting ratios. Our work provides a new path toward low-loss and multi-level optical switches using lossy PCMs.
△ Less
Submitted 13 February, 2024;
originally announced February 2024.
-
Stochastic Distinguishability of Markovian Trajectories
Authors:
Asawari Pagare,
Zhongmin Zhang,
Jiming Zheng,
Zhiyue Lu
Abstract:
The ability to distinguish between stochastic systems based on their trajectories is crucial in thermodynamics, chemistry, and biophysics. The Kullback-Leibler (KL) divergence, $D_{\text{KL}}^{AB}(0,τ)$, quantifies the distinguishability between the two ensembles of length-$τ$ trajectories from Markov processes A and B. However, evaluating $D_{\text{KL}}^{AB}(0,τ)$ from histograms of trajectories…
▽ More
The ability to distinguish between stochastic systems based on their trajectories is crucial in thermodynamics, chemistry, and biophysics. The Kullback-Leibler (KL) divergence, $D_{\text{KL}}^{AB}(0,τ)$, quantifies the distinguishability between the two ensembles of length-$τ$ trajectories from Markov processes A and B. However, evaluating $D_{\text{KL}}^{AB}(0,τ)$ from histograms of trajectories faces sufficient sampling difficulties, and no theory explicitly reveals what dynamical features contribute to the distinguishability. This letter provides a general formula that decomposes $D_{\text{KL}}^{AB}(0,τ)$ in space and time for any Markov processes, arbitrarily far from equilibrium or steady state. It circumvents the sampling difficulty of evaluating $D_{\text{KL}}^{AB}(0,τ)$. Furthermore, it explicitly connects trajectory KL divergence with individual transition events and their waiting time statistics. The results provide insights into understanding distinguishability between Markov processes, leading to new theoretical frameworks for designing biological sensors and optimizing signal transduction.
△ Less
Submitted 1 May, 2024; v1 submitted 29 January, 2024;
originally announced January 2024.
-
Temporal Interaction and its Role in the Evolution of Cooperation
Authors:
Yujie He,
Tianyu Ren,
Xiao-Jun Zeng,
Huawen Liang,
Liukai Yu,
Junjun Zheng
Abstract:
This research investigates the impact of dynamic, time-varying interactions on cooperative behaviour in social dilemmas. Traditional research has focused on deterministic rules governing pairwise interactions, yet the impact of interaction frequency and synchronization in groups on cooperation remains underexplored. Addressing this gap, our work introduces two temporal interaction mechanisms to mo…
▽ More
This research investigates the impact of dynamic, time-varying interactions on cooperative behaviour in social dilemmas. Traditional research has focused on deterministic rules governing pairwise interactions, yet the impact of interaction frequency and synchronization in groups on cooperation remains underexplored. Addressing this gap, our work introduces two temporal interaction mechanisms to model the stochastic or periodic participation of individuals in public goods games, acknowledging real-life variances due to exogenous temporal factors and geographical time differences. We consider that the interaction state significantly influences both game payoff calculations and the strategy updating process, offering new insights into the emergence and sustainability of cooperation. Our results indicate that maximum game participation frequency is suboptimal under a stochastic interaction mechanism. Instead, an intermediate activation probability maximizes cooperation, suggesting a vital balance between interaction frequency and inactivity security. Furthermore, local synchronization of interactions within specific areas is shown to be beneficial, as time differences hinder the spread of cross-structures but promote the formation of dense cooperative clusters with smoother boundaries. We also note that stronger clustering in networks, larger group sizes and lower noise increase cooperation. This research contributes to understanding the role of node-based temporality and probabilistic interactions in social dilemmas, offering insights into fostering cooperation.
△ Less
Submitted 18 August, 2024; v1 submitted 22 January, 2024;
originally announced January 2024.
-
10 kT axial magnetic field generated using multiple conventional laser beams
Authors:
Jue Xuan Hao,
Xiang Tang,
Alexey Arefiev,
Robert J. Kingham,
Ping Zhu,
Yin Shi,
Jian Zheng
Abstract:
Strong laser-generated magnetic fields have important applications in high energy density science and laboratory astrophysics. Although the inverse Faraday effect provides a mechanism for generating strong magnetic fields by absorbing angular momentum from a high-intensity laser pulse, it is not applicable to conventional linearly polarized (LP) Gaussian laser beams. We have dmeveloped a spatial a…
▽ More
Strong laser-generated magnetic fields have important applications in high energy density science and laboratory astrophysics. Although the inverse Faraday effect provides a mechanism for generating strong magnetic fields by absorbing angular momentum from a high-intensity laser pulse, it is not applicable to conventional linearly polarized (LP) Gaussian laser beams. We have dmeveloped a spatial arrangement that overcomes this difficulty by using multiple laser beams arranged to have a twist in the pointing direction. Using three-dimensional kinetic particle-in-cell simulations, we show that this arrangement is the key to generating a strong magnetic field. The resulting multi-kT picosecond axial magnetic field occupies tens of thousands of cubic microns of space and can be realized under a wide range of laser parameters and plasma conditions. Our scheme is well suited for implementation at PW-class laser facilities with multiple conventional LP laser beams.
△ Less
Submitted 23 December, 2023;
originally announced December 2023.
-
Anomalous hot electron generation from two-plasmon decay instability driven by broadband laser pulses with intensity modulations
Authors:
C. Yao,
J. Li,
L. Hao,
R. Yan,
C. Wang,
A. Lei,
Y-K. Ding,
J. Zheng
Abstract:
We investigate the hot electrons generated from two-plasmon decay (TPD) instability driven by laser pulses with intensity modulated by a frequency $Δω_m$. Our primary focus lies on scenarios where $Δω_m$ is on the same order of the TPD growth rate $ γ_0$ ( $Δω_m \sim γ_0$), corresponding to moderate laser frequency bandwidths for TPD mitigation. With $Δω_m$ conveniently modeled by a basic two-colo…
▽ More
We investigate the hot electrons generated from two-plasmon decay (TPD) instability driven by laser pulses with intensity modulated by a frequency $Δω_m$. Our primary focus lies on scenarios where $Δω_m$ is on the same order of the TPD growth rate $ γ_0$ ( $Δω_m \sim γ_0$), corresponding to moderate laser frequency bandwidths for TPD mitigation. With $Δω_m$ conveniently modeled by a basic two-color scheme of the laser wave fields in fully-kinetic particle-in-cell simulations, we demonstrate that the energies of TPD modes and hot electrons exhibit intermittent evolution at the frequency $Δω_m$, particularly when $Δω_m \sim γ_0$. With the dynamic TPD behavior, the overall ratio of hot electron energy to the incident laser energy, $f_{hot}$, changes significantly with $Δω_m$. While $f_{hot}$ drops notably with increasing $Δω_m$ at large $Δω_m$ limit as expected, it goes anomalously beyond the hot electron energy ratio for a single-frequency incident laser pulse with the same average intensity when $Δω_m$ falls below a specific threshold frequency $Δω_c$. We find this threshold frequency primarily depends on $γ_0$ and the collisional damping rate of plasma waves, with relatively lower sensitivity to the density scale length. We develop a scaling model characterizing the relation of $Δω_c$ and laser plasma conditions, enabling the potential extention of our findings to more complex and realistic scenarios.
△ Less
Submitted 25 November, 2023;
originally announced November 2023.
-
Photo-Detection Efficiency measurement for FBK HD Near-UV sensitive SiPMs at 10 K temperature
Authors:
Meiyuenan Ma,
Jiangfeng Zhou,
Fengbo Gu,
Junhui Liao,
Yuanning Gao,
Zhaohua Peng,
Jian Zheng,
Guangpeng An,
Lifeng Zhang,
Lei Zhang,
Zhuo Liang,
Xiuliang Zhao
Abstract:
We report the characterization of the FBK ``NUV-HD-Cryo'' SiPMs at 10 K temperature. With 405 nm and 530 nm light, we measured the photo-detection efficiency (PDE) at the bias voltages between 6 to 11 V overvoltage (OV). The PDE reaches $\sim$ 40\% for 405 nm and 530 nm light with a bias voltage of OV 9 V. A bias voltage higher than 9 V leads to a slightly greater PDE. We also measured the SiPMs'…
▽ More
We report the characterization of the FBK ``NUV-HD-Cryo'' SiPMs at 10 K temperature. With 405 nm and 530 nm light, we measured the photo-detection efficiency (PDE) at the bias voltages between 6 to 11 V overvoltage (OV). The PDE reaches $\sim$ 40\% for 405 nm and 530 nm light with a bias voltage of OV 9 V. A bias voltage higher than 9 V leads to a slightly greater PDE. We also measured the SiPMs' PDE at room temperature (RT). The results are consistent with the measurements on the similar model SiPMs by other groups. The I-V curve of the SiPMs differs significantly from the conventional one measured at RT. The dark current ratio (DCR) is tested to be $\sim$ 1 Hz for the 92 mm$^2$ SiPMs, or 0.01 Hz/mm$^2$, which is $\sim$ 7 orders lower than the ratio tested at RT. The SiPMs' performance at 10 K demonstrated that it could be equipped on a liquid helium detector as the photosensor to search for rare events, including but not limited to dark matter searches.
△ Less
Submitted 29 December, 2023; v1 submitted 17 November, 2023;
originally announced November 2023.
-
Non-Volatile Control of Valley Polarized Emission in 2D WSe2-AlScN Heterostructures
Authors:
Simrjit Singh,
Kwan-Ho Kim,
Kiyoung Jo,
Pariasadat Musavigharavi,
Bumho Kim,
Jeffrey Zheng,
Nicholas Trainor,
Chen Chen,
Joan M. Redwing,
Eric A Stach,
Roy H Olsson III,
Deep Jariwala
Abstract:
Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-eff…
▽ More
Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-effect transistors using a ML-WSe2 channel and a AlScN ferroelectric dielectric, and experimentally demonstrate efficient tuning as well as non-volatile control of valley polarization. We measured a large array of transistors and obtained a maximum valley polarization of ~27% at 80 K with stable retention up to 5400 secs. The enhancement in the valley polarization was ascribed to the efficient exciton-to-trion (X-T) conversion and its coupling with an out-of-plane electric field, viz. the quantum-confined Stark effect. This changes the valley depolarization pathway from strong exchange interactions to slow spin-flip intervalley scattering. Our research demonstrates a promising approach for achieving non-volatile control over valley polarization and suggests new design principles for practical valleytronic devices.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Conceptual design and progress of transmitting $\sim$ MV DC HV into 4 K LHe detectors
Authors:
Zhuo Liang,
Fengbo Gu,
Jiangfeng Zhou,
Junhui Liao,
Yuanning Gao,
Zhaohua Peng,
Jian Zheng,
Guangpeng An,
Meiyuenan Ma,
Lifeng Zhang,
Lei Zhang,
Xiuliang Zhao,
Junfeng Xia,
Gang Liu,
Shangmao Hu
Abstract:
A dual-phase TPC (Time Projection Chamber) is more advanced in characterizing an event than a single-phase one because it can, in principle, reconstruct the 3D (X-Y-Z) image of the event, while a single-phase detector can only show a 2D (X-Y) picture. As a result, more enriched physics is expected for a dual-phase detector than a single-phase one. However, to build such a detector, DC HV (High Vol…
▽ More
A dual-phase TPC (Time Projection Chamber) is more advanced in characterizing an event than a single-phase one because it can, in principle, reconstruct the 3D (X-Y-Z) image of the event, while a single-phase detector can only show a 2D (X-Y) picture. As a result, more enriched physics is expected for a dual-phase detector than a single-phase one. However, to build such a detector, DC HV (High Voltage) must be delivered into the chamber (to have a static electric field), which is a challenging task, especially for an LHe detector due to the extremely low temperature, $\sim$ 4 K, and the very high voltage, $\sim$ MV (Million Volts). This article introduces a convincing design for transmitting $\sim$ MV DC into a 4 K LHe detector. We also report the progress of manufacturing a 100 kV DC feedthrough capable of working at 4 K. Surprisingly, we realized that the technology we developed here might be a valuable reference to the scientists and engineers aiming to build residential bases on the Moon or Mars.
△ Less
Submitted 19 October, 2023;
originally announced October 2023.
-
A novel nuclear recoil calibration for liquid noble gas detectors
Authors:
Fengbo Gu,
Jiangfeng Zhou,
Junhui Liao,
Yuanning Gao,
Zhuo Liang,
Meiyuenan Ma,
Zhaohua Peng,
Lifeng Zhang,
Lei Zhang,
Jian Zheng
Abstract:
According to many dark matter models, a potential signal registered in a detector would feature a single-scattering nuclear recoil (NR). So, it is crucial to calibrate the detector's response to NR events. The conventional calibrations implement $\sim$ keV to MeV neutrons, which can be produced by an accelerator, a neutron generator, or a radioactive source. Although the calibrating methods have b…
▽ More
According to many dark matter models, a potential signal registered in a detector would feature a single-scattering nuclear recoil (NR). So, it is crucial to calibrate the detector's response to NR events. The conventional calibrations implement $\sim$ keV to MeV neutrons, which can be produced by an accelerator, a neutron generator, or a radioactive source. Although the calibrating methods have been widely employed, they could be improved in several ways: (a) the incident neutron energy should be more monoenergetic, (b) the calibrating NR energy should line up with the region of interest (ROI) of the experiment, and (c) the intensity of the beam should be appropriate. In the paper, we introduce a novel NR calibration method for liquid helium detectors, in which a helium beam ($α$ particles) will be implemented to calibrate the detectors. The helium beam can (i) be tuned precisely to have a jitter of $\lesssim $ 4\% (the $α$ beam's kinetic energy is equivalent to the recoil energy in the conventional calibrations with fast neutrons); (ii) have an energy between $\sim$ 100 eV and tens of keV; and (iii) provide a tunable flux from nA to 100 $μ$A, which presents convenience in beam pipe configuration to obtain a $\sim$ 100 Hz events rate so that the events pileup would be ignorable.
△ Less
Submitted 23 May, 2024; v1 submitted 19 October, 2023;
originally announced October 2023.
-
Weakly supervised learning for pattern classification in serial femtosecond crystallography
Authors:
Jianan Xie,
Ji Liu,
Chi Zhang,
Xihui Chen,
Ping Huai,
Jie Zheng,
Xiaofeng Zhang
Abstract:
Serial femtosecond crystallography at X-ray free electron laser facilities opens a new era for the determination of crystal structure. However, the data processing of those experiments is facing unprecedented challenge, because the total number of diffraction patterns needed to determinate a high-resolution structure is huge. Machine learning methods are very likely to play important roles in deal…
▽ More
Serial femtosecond crystallography at X-ray free electron laser facilities opens a new era for the determination of crystal structure. However, the data processing of those experiments is facing unprecedented challenge, because the total number of diffraction patterns needed to determinate a high-resolution structure is huge. Machine learning methods are very likely to play important roles in dealing with such a large volume of data. Convolutional neural networks have made a great success in the field of pattern classification, however, training of the networks need very large datasets with labels. Th is heavy dependence on labeled datasets will seriously restrict the application of networks, because it is very costly to annotate a large number of diffraction patterns. In this article we present our job on the classification of diffraction pattern by weakly supervised algorithms, with the aim of reducing as much as possible the size of the labeled dataset required for training. Our result shows that weakly supervised methods can significantly reduce the need for the number of labeled patterns while achieving comparable accuracy to fully supervised methods.
△ Less
Submitted 21 September, 2023; v1 submitted 30 July, 2023;
originally announced September 2023.
-
Phonon-Mediated Third-Harmonic Generation in Diamond
Authors:
Jiaoyang Zheng,
Guru Khalsa,
Jeffrey Moses
Abstract:
We observe strongly anisotropic third-harmonic generation mediated by resonant sum-frequency driving of Raman phonons with THz light, extending light-induced dual control of structural and optical properties in solids. Either strong enhancement or strong suppression of the third harmonic covering six orders of magnitude can be achieved, a result of interference between purely electronic and phonon…
▽ More
We observe strongly anisotropic third-harmonic generation mediated by resonant sum-frequency driving of Raman phonons with THz light, extending light-induced dual control of structural and optical properties in solids. Either strong enhancement or strong suppression of the third harmonic covering six orders of magnitude can be achieved, a result of interference between purely electronic and phonon-mediated contributions to the polarization field. These findings enrich capabilities for tailoring nonlinear optics via phononics and for the spectroscopy of crystalline structural dynamics.
△ Less
Submitted 2 May, 2024; v1 submitted 31 August, 2023;
originally announced September 2023.
-
Advances of Machine Learning in Materials Science: Ideas and Techniques
Authors:
Sue Sin Chong,
Yi Sheng Ng,
Hui-Qiong Wang,
Jin-Cheng Zheng
Abstract:
In this big data era, the use of large dataset in conjunction with machine learning (ML) has been increasingly popular in both industry and academia. In recent times, the field of materials science is also undergoing a big data revolution, with large database and repositories appearing everywhere. Traditionally, materials science is a trial-and-error field, in both the computational and experiment…
▽ More
In this big data era, the use of large dataset in conjunction with machine learning (ML) has been increasingly popular in both industry and academia. In recent times, the field of materials science is also undergoing a big data revolution, with large database and repositories appearing everywhere. Traditionally, materials science is a trial-and-error field, in both the computational and experimental departments. With the advent of machine learning-based techniques, there has been a paradigm shift: materials can now be screened quickly using ML models and even generated based on materials with similar properties; ML has also quietly infiltrated many sub-disciplinary under materials science. However, ML remains relatively new to the field and is expanding its wing quickly. There are a plethora of readily-available big data architectures and abundance of ML models and software; The call to integrate all these elements in a comprehensive research procedure is becoming an important direction of material science research. In this review, we attempt to provide an introduction and reference of ML to materials scientists, covering as much as possible the commonly used methods and applications, and discussing the future possibilities.
△ Less
Submitted 26 September, 2023; v1 submitted 26 July, 2023;
originally announced July 2023.
-
Fast Fabrication of WS2/Bi2Se3 Heterostructures for High Performance Photodetection
Authors:
Fan Li,
Jialin Li,
Junsheng Zheng,
Yuanbiao Tong,
Huanfeng Zhu,
Pan Wang,
Linjun Li
Abstract:
Two-dimensional (2D) material heterostructures have attracted considerable attention owing to their interesting and novel physical properties, which expand the possibilities for future optoelectronic, photovoltaic, and nanoelectronic applications. A portable, fast, and deterministic transfer technique is highly needed for the fabrication of heterostructures. Herein, we report a fast half wet poly(…
▽ More
Two-dimensional (2D) material heterostructures have attracted considerable attention owing to their interesting and novel physical properties, which expand the possibilities for future optoelectronic, photovoltaic, and nanoelectronic applications. A portable, fast, and deterministic transfer technique is highly needed for the fabrication of heterostructures. Herein, we report a fast half wet poly(dimethylsiloxane) (PDMS) transfer process utilizing the change of adhesion energy with the help of micron-sized water droplets. Using this method, a vertical stacking of the WS2/Bi2Se3 heterostructure with a straddling band configuration is successfully assembled on a fluorophlogopite substrate. Thanks to the complementary band gaps and high efficiency of interfacial charge transfer, the photodetector based on the heterostructure exhibits a superior responsivity of 109.9 A/W for a visible incident light at 473 nm and 26.7 A/W for a 1064 nm near-infrared illumination. Such high photoresponsivity of the heterostructure demonstrates that our transfer method not only owns time efficiency but also ensures high quality of the heterointerface. Our study may open new pathways to the fast and massive fabrication of various vertical 2D heterostructures for applications in twistronics/valleytronics and other band engineering devices.
△ Less
Submitted 25 July, 2023;
originally announced July 2023.
-
Ultra-high Q alumina optical microresonators in the UV and blue bands
Authors:
Chengxing He,
Yubo Wang,
Carlo Waldfried,
Guangcanlan Yang,
Jun-Fei Zheng,
Shu Hu,
Hong X. Tang
Abstract:
UV and visible photonics enable applications ranging from spectroscopic sensing to communication and quantum information processing. Photonics structures in these wavelength regimes, however, tend to experience higher loss than their IR counterpart. Particularly in the near-UV band, on-chip optical microresonators have not yet achieved a quality factor beyond 1 million. Here we report ultra-low-lo…
▽ More
UV and visible photonics enable applications ranging from spectroscopic sensing to communication and quantum information processing. Photonics structures in these wavelength regimes, however, tend to experience higher loss than their IR counterpart. Particularly in the near-UV band, on-chip optical microresonators have not yet achieved a quality factor beyond 1 million. Here we report ultra-low-loss photonic waveguides and resonators patterned from alumina thin films prepared by a highly scalable atomic layer deposition process. We demonstrate ultra high Q factor of 1.5$\,\times\,$10$^6$ at 390nm, a record value at UV bands, and 1.9$\,\times\,$10$^6$ at 488.5nm.
△ Less
Submitted 19 August, 2023; v1 submitted 2 July, 2023;
originally announced July 2023.
-
Generation of intense cylindrical vector beams by Faraday effect in plasma
Authors:
Wei Liu,
Qing Jia,
Jian Zheng
Abstract:
Cylindrical vector (CV) beams, whose polarizations are cylindrically symmetric, have recently been widely applied in high energy density physics such as electron acceleration and intense spatiotemporal optical vortices generation. Thermal-damage-resistant plasma optics are expected to generate intense CV beams. In this work, based on the Faraday effect, we propose a method that can directly conver…
▽ More
Cylindrical vector (CV) beams, whose polarizations are cylindrically symmetric, have recently been widely applied in high energy density physics such as electron acceleration and intense spatiotemporal optical vortices generation. Thermal-damage-resistant plasma optics are expected to generate intense CV beams. In this work, based on the Faraday effect, we propose a method that can directly convert an intense linearly/circularly polarized Gaussian beam into a CV/vortex beam by setting up an azimuthally distributed axial magnetic field in the plasma. Three-dimensional particle-in-cell simulations demonstrate good conversion efficiency, which offers a new degree of freedom for manipulating high-power laser pulses and paves the way for further studies on ultra-strong vector beams. In addition, our work reveals a new possible source of photon orbital angular momentum related to magnetized plasma in astrophysics and space physics.
△ Less
Submitted 30 June, 2023;
originally announced July 2023.
-
Surface Saturation Current Densities of Perovskite Thin Films from Suns-Photoluminescence Quantum Yield Measurements
Authors:
Robert Lee Chin,
Arman Mahboubi Soufiani,
Paul Fassl,
Jianghui Zheng,
Eunyoung Choi,
Anita Ho-Baillie,
Ulrich Paetzold,
Thorsten Trupke,
Ziv Hameiri
Abstract:
We present a simple, yet powerful analysis of Suns-photoluminescence quantum yield measurements that can be used to determine the surface saturation current densities of thin film semiconductors. We apply the method to state-of-the-art polycrystalline perovskite thin films of varying absorber thickness. We show that the non-radiative bimolecular recombination in these samples originates from the s…
▽ More
We present a simple, yet powerful analysis of Suns-photoluminescence quantum yield measurements that can be used to determine the surface saturation current densities of thin film semiconductors. We apply the method to state-of-the-art polycrystalline perovskite thin films of varying absorber thickness. We show that the non-radiative bimolecular recombination in these samples originates from the surfaces. To the best of our knowledge, this is the first study to demonstrate and quantify non-linear (bimolecular) surface recombination in perovskite thin films.
△ Less
Submitted 7 June, 2023;
originally announced June 2023.
-
Decoupling Bimolecular Recombination Mechanisms in Perovskite Thin Films Using Photoluminescence Quantum Yield
Authors:
Robert Lee Chin,
Arman Mahboubi Soufiani,
Paul Fassl,
Jianghui Zheng,
Eunyoung Choi,
Anita Ho-Baillie,
Ulrich Paetzold,
Thorsten Trupke,
Ziv Hameiri
Abstract:
We present a novel analytical model for analysing the spectral photoluminescence quantum yield of non-planar semiconductor thin films. This model considers the escape probability of luminescence and is applied to triple-cation perovskite thin films with a 1-Sun photoluminescence quantum yield approaching 25%. By using our model, we can decouple the internal radiative, external radiative, and non-r…
▽ More
We present a novel analytical model for analysing the spectral photoluminescence quantum yield of non-planar semiconductor thin films. This model considers the escape probability of luminescence and is applied to triple-cation perovskite thin films with a 1-Sun photoluminescence quantum yield approaching 25%. By using our model, we can decouple the internal radiative, external radiative, and non-radiative bi-molecular recombination coefficients. Unlike other techniques that measure these coefficients separately, our proposed method circumvents experimental uncertainties by avoiding the need for multiple photoluminescence measurement techniques. We validate our model by comparing the extracted implied open-circuit voltage, effective luminescence escape probabilities, absorptivity, and absorption coefficient with values obtained using established methods and found that our results are consistent with previous findings. Next, we compare the implied 1-Sun radiative open-circuit voltage and radiative recombination current obtained from our method with literature values. We then convert the implied open-circuit voltage and implied radiative open-circuit voltage to the injection-dependent apparent-effective and apparent-radiative carrier lifetimes, which allow us to decouple the different recombination coefficients. Using this lifetime analysis, we predict the efficiency losses due to each recombination mechanism. Our proposed analytical model provides a reliable method for analysing the spectral photoluminescence quantum yield of semiconductor thin films, which will facilitate further research into the photovoltaic properties of these materials.
△ Less
Submitted 20 June, 2023; v1 submitted 3 June, 2023;
originally announced June 2023.
-
Suppressing stimulated Raman side-scattering by vector light
Authors:
Xiaobao Jia,
Qing Jia,
Rui Yan,
Jian Zheng
Abstract:
Recently, the verification of stimulated Raman side-scattering (SRSS) in different laser inertial confinement fusion ignition schemes poses an underlying risk of SRSS on ignition. In this paper, we propose a method to use the non-uniform polarization nature of vector light to suppress SRSS and give an additional threshold condition determined by the parameter of vector light. For SRSS at 90 degree…
▽ More
Recently, the verification of stimulated Raman side-scattering (SRSS) in different laser inertial confinement fusion ignition schemes poses an underlying risk of SRSS on ignition. In this paper, we propose a method to use the non-uniform polarization nature of vector light to suppress SRSS and give an additional threshold condition determined by the parameter of vector light. For SRSS at 90 degrees, where the scattered electromagnetic wave travels perpendicular to the density profile, the polarization variation of the pump will change the wave vector of scattered light, thereby reducing the growth length and preventing the scattered electromagnetic wave from growing. This suppressive scheme is verified through three-dimensional particle-in-cell simulations. Our illustrative simulation results demonstrate that for linearly polarized Gaussian light, the SRSS signal occurs in the 90-degree direction fiercely. At the same time, for the vector light, there is few SRSS signal even if the condition dramatically exceeds the threshold. Furthermore, we discuss the impact of vector light on stimulated Raman and Brillouin backscattering, and two-plasma decay.
△ Less
Submitted 11 May, 2023;
originally announced May 2023.
-
Acousto-Optic Modulation in Ambient Air
Authors:
Yannick Schrödel,
Claas Hartmann,
Tino Lang,
Jiaan Zheng,
Max Steudel,
Matthias Rutsch,
Sarper H. Salman,
Martin Kellert,
Mikhail Pergament,
Thomas Hahn-Jose,
Sven Suppelt,
Jan Helge Dörsam,
Anne Harth,
Wim P. Leemans,
Franz X. Kärtner,
Ingmar Hartl,
Mario Kupnik,
Christoph M. Heyl
Abstract:
Control over intensity, shape, direction, and phase of coherent light is essential in numerous fields, reaching from gravitational wave astronomy over quantum metrology and ultrafast sciences to semi-conductor fabrication. Modern laser optics, however, frequently demands parameter regimes where either the wavelength or the optical power restricts control due to linear absorption, light-induced dam…
▽ More
Control over intensity, shape, direction, and phase of coherent light is essential in numerous fields, reaching from gravitational wave astronomy over quantum metrology and ultrafast sciences to semi-conductor fabrication. Modern laser optics, however, frequently demands parameter regimes where either the wavelength or the optical power restricts control due to linear absorption, light-induced damage or optical nonlinearity. The properties of solid media, upon which most photonic control schemes rely, impose these limitations. We propose to circumvent these constraints using gaseous media tailored by high-intensity ultrasound waves. We demonstrate a first implementation of this approach by deflecting ultrashort laser pulses using ultrasound waves in ambient air, entirely omitting transmissive solid media. At optical peak powers of 20 GW exceeding previous limits of solid-based acousto-optic modulation by about three orders of magnitude, we reach a deflection efficiency greater than 50% while preserving excellent beam quality. Our approach is not limited to laser pulse deflection via acousto-optic modulation: gas-phase photonic schemes controlled by sonic waves can prospectively be translated to various optical methods, e.g., lenses or waveguides, rendering them effectively invulnerable against damage and opening up new spectral regions.
△ Less
Submitted 28 April, 2023; v1 submitted 13 April, 2023;
originally announced April 2023.
-
Efficient generation of axial magnetic field by multiple laser beams with twisted pointing directions
Authors:
Yin Shi,
Alexey Arefiev,
Jue Xuan Hao,
Jian Zheng
Abstract:
Strong laser-driven magnetic fields are crucial for high-energy-density physics and laboratory astrophysics research, but generation of axial multi-kT fields remains a challenge. The difficulty comes from the inability of a conventional linearly polarized laser beam to induce the required azimuthal current or, equivalently, angular momentum (AM). We show that several laser beams can overcome this…
▽ More
Strong laser-driven magnetic fields are crucial for high-energy-density physics and laboratory astrophysics research, but generation of axial multi-kT fields remains a challenge. The difficulty comes from the inability of a conventional linearly polarized laser beam to induce the required azimuthal current or, equivalently, angular momentum (AM). We show that several laser beams can overcome this difficulty. Our three-dimensional kinetic simulations demonstrate that a twist in their pointing directions {enables them to carry orbital AM and transfer it to the plasma, thus generating a hot electron population carrying AM needed to sustain the magnetic field.} The resulting multi-kT field occupies a volume that is tens of thousands of cubic microns and it persists on a ps time scale. The mechanism can be realized for a wide range of laser intensities and pulse durations. Our scheme is well-suited for implementation using {multi-kJ PW-class lasers, because, by design, they have multiple beamlets and because the scheme requires only linear-polarization.
△ Less
Submitted 20 March, 2023;
originally announced March 2023.
-
Design of new helium vessel and tuner for CEPC 650 MHz 2 cell cavity
Authors:
Z. H. Mi,
Z. Q. Li,
P. Sha,
J. Y. Zhai,
F. S. He,
Q. Ma,
B. Q. Liu,
X. Y. Zhang,
R. X. Han,
F. B. Meng,
H. J. Zheng
Abstract:
CEPC will use 650 MHz cavities for the collider. Each collider cryomodule contains six 650 MHz 2-cell cavities, which is totally new. Therefore, new helium vessel and tuner are designed for the 650 MHz 2-cell cavity. Also, a test cryomodule, which consists of two 650 MHz 2-cell cavities, has begun as the first step to the full scale cryomodule. This paper mainly focuses on the structure design of…
▽ More
CEPC will use 650 MHz cavities for the collider. Each collider cryomodule contains six 650 MHz 2-cell cavities, which is totally new. Therefore, new helium vessel and tuner are designed for the 650 MHz 2-cell cavity. Also, a test cryomodule, which consists of two 650 MHz 2-cell cavities, has begun as the first step to the full scale cryomodule. This paper mainly focuses on the structure design of Helium vessel and tuner for the 2-cell cavity.
△ Less
Submitted 7 January, 2023;
originally announced January 2023.
-
Non-volatile electrically programmable integrated photonics with a 5-bit operation
Authors:
Rui Chen,
Zhuoran Fang,
Christopher Perez,
Forrest Miller,
Khushboo Kumari,
Abhi Saxena,
Jiajiu Zheng,
Sarah J. Geiger,
Kenneth E. Goodson,
Arka Majumdar
Abstract:
Scalable programmable photonic integrated circuits (PICs) can potentially transform the current state of classical and quantum optical information processing. However, traditional means of programming, including thermo-optic, free carrier dispersion, and Pockels effect result in either large device footprints or high static energy consumptions, significantly limiting their scalability. While chalc…
▽ More
Scalable programmable photonic integrated circuits (PICs) can potentially transform the current state of classical and quantum optical information processing. However, traditional means of programming, including thermo-optic, free carrier dispersion, and Pockels effect result in either large device footprints or high static energy consumptions, significantly limiting their scalability. While chalcogenide-based non-volatile phase-change materials (PCMs) could mitigate these problems thanks to their strong index modulation and zero static power consumption, they often suffer from large absorptive loss, low cyclability, and lack of multilevel operation. Here, we report a wide-bandgap PCM antimony sulfide (Sb2S3)-clad silicon photonic platform simultaneously achieving low loss, high cyclability, and 5-bit operation. We switch Sb2S3 via an on-chip silicon PIN diode heater and demonstrate components with low insertion loss (<1.0 dB), high extinction ratio (>10 dB), and high endurance (>1,600 switching events). Remarkably, we find that Sb2S3 can be programmed into fine intermediate states by applying identical and thermally isolated pulses, providing a unique approach to controllable multilevel operation. Through dynamic pulse control, we achieve on-demand and accurate 5-bit (32 levels) operations, rendering 0.50 +- 0.16 dB contrast per step. Using this multilevel behavior, we further trim random phase error in a balanced Mach-Zehnder interferometer. Our work opens an attractive pathway toward non-volatile large-scale programmable PICs with low-loss and on-demand multi-bit operations.
△ Less
Submitted 1 January, 2023;
originally announced January 2023.
-
Generating axial magnetic fields via two plasmon decay driven by a twisted laser
Authors:
Yu Ji,
Chang-Wang Lian,
Yin Shi,
Rui Yan,
Shihui Cao,
Chuang Ren,
Jian Zheng
Abstract:
We propose a new way of axial magnetic fields generation in a non-relativistic laser intensity regime by using a twisted light carrying orbital angular momentum (OAM) to stimulate two-plasmon decay (TPD) in a plasma. The growth of TPD driven by an OAM light in a Laguerre-Gauss (LG) mode is investigated through three dimensional fluid simulations and theory. A theory based on the assumption that th…
▽ More
We propose a new way of axial magnetic fields generation in a non-relativistic laser intensity regime by using a twisted light carrying orbital angular momentum (OAM) to stimulate two-plasmon decay (TPD) in a plasma. The growth of TPD driven by an OAM light in a Laguerre-Gauss (LG) mode is investigated through three dimensional fluid simulations and theory. A theory based on the assumption that the electron plasma waves (EPWs) are locally driven by a number of local plane-wave lasers predicts the maximum growth rate proportional to the peak amplitude of the pump laser field and is verified by the simulations. The OAM conservation during its transportation from the laser to the TPD daughter EWPs is shown by both the theory and the simulations. The theory predicts generation of ~40T axial magnetic fields through the OAM absorption via TPD, which has perspective applications in the field of high energy density physics.
△ Less
Submitted 9 November, 2022;
originally announced November 2022.
-
Coating $μ$m TPB on a cylindrical detector and studying the sample films being cooled to LN and LHe temperatures
Authors:
Jiangfeng Zhou,
Zebang Ouyang,
Junhui Liao,
Zhuo Liang,
Zhaohua Peng,
Lei Zhang,
Lifeng Zhang,
Jian Zheng
Abstract:
ALETHEIA is a newly established dark matter direct detection project that aims at hunting for low-mass WIMPs. TPB is widely implemented in liquid helium and argon experiments to shift VUV photons to visible light. We first report that we have successfully coated $\sim 3 ~μ$m TPB on the inner walls of a 10-cm cylindrical PTFE detector; we split the coating process into two steps to have all of the…
▽ More
ALETHEIA is a newly established dark matter direct detection project that aims at hunting for low-mass WIMPs. TPB is widely implemented in liquid helium and argon experiments to shift VUV photons to visible light. We first report that we have successfully coated $\sim 3 ~μ$m TPB on the inner walls of a 10-cm cylindrical PTFE detector; we split the coating process into two steps to have all of the surfaces being coated with the same thickness; three independent methods were applied to figure out the thickness of the TPB coating layers, and consistent results were obtained. Second, with an SEM machine, we scanned the surface of TPB coating sample films exposed to different cryogenic temperatures. The first group of sample layers were immersed into a liquid nitrogen dewar for forty hours, the second group samples were cooled to 4.5 K for three hours, and the third group stayed at room temperature after coating. The SEM-scanned images of the sample films barely show any noticeable difference.
△ Less
Submitted 21 November, 2022; v1 submitted 23 October, 2022;
originally announced October 2022.
-
Understanding The Reversible Electrodeposition of Al in Low-Cost Room Temperature Molten Salts
Authors:
Regina Garcia-Mendez,
Jingxu Zheng,
David C. Bock,
Cherno Jaye,
Daniel A. Fischer,
Amy C. Marschilok,
Kenneth J. Takeuchi,
Esther S. Takeuchi,
Lynden A. Archer
Abstract:
Aluminum is the most earth-abundant metal, is trivalent, is inert in ambient humid air, and has a density approximately four-times that of lithium at room temperature. These attributes make it an attractive material for cost-effective, long-duration storage of electrical energy in batteries. Scientific discoveries in the past decade have established that secondary Al batteries can be created by pa…
▽ More
Aluminum is the most earth-abundant metal, is trivalent, is inert in ambient humid air, and has a density approximately four-times that of lithium at room temperature. These attributes make it an attractive material for cost-effective, long-duration storage of electrical energy in batteries. Scientific discoveries in the past decade have established that secondary Al batteries can be created by paring an Al anode with a graphite or transition metal oxide cathode, in imidazolium-based, room-temperature ionic-liquid-Aluminum chloride electrolytes. Here we report findings from a systematic study that sheds light on the structural requirements, physicochemical, and transport properties of the ionic liquid electrolytes responsible for the high reversibility of Al battery anodes. We find that the most important interfacial and transport properties of these electrolytes can be achieved in other electrolytes, including ammonium-based molten salts that are available at costs as much as twenty-times lower than the ionic liquid-Aluminum chloride melt. High Al reversibility in ammonium- and imidazolium-based electrolytes is specifically shown to require a critical ratio of the solvation species, where Lewis acidity and beneficial interfacial reactions continuously etch the alumina resistive interfacial layer and form beneficial solid electrolyte interphase at the anode. We report further that successful development of new electrolyte families that support high Al anode reversibility also provides a good platform for detailed studies of the working mechanisms of an intercalation graphite cathode using X-ray absorption spectroscopy. Our findings therefore open new opportunities for developing simple, cost-effective, room-temperature Al batteries that enable long-duration electrical energy storage.
△ Less
Submitted 21 October, 2022;
originally announced October 2022.
-
Plasma zone plate for high-power lasers driven by a Laguerre-Gaussian beam
Authors:
Lukai Wang,
Wei Liu,
Qing Jia,
Jian Zheng
Abstract:
Plasma-based optics has emerged as an attractive alternative to traditional solid-state optics for high-power laser manipulation due to its higher damage threshold. In this work, we propose a plasma zone plate (PZP) driven by the ponderomotive force of a Laguerre-Gaussian beam when it irradiates an underdense plasma slice. We formulate the theory of the PZP and demonstrate its formation and functi…
▽ More
Plasma-based optics has emerged as an attractive alternative to traditional solid-state optics for high-power laser manipulation due to its higher damage threshold. In this work, we propose a plasma zone plate (PZP) driven by the ponderomotive force of a Laguerre-Gaussian beam when it irradiates an underdense plasma slice. We formulate the theory of the PZP and demonstrate its formation and function of focusing high-power lasers using particle-in-cell simulations. The proposed scheme may offer a new method to focus and manipulate high-power lasers with plasma-based optics
△ Less
Submitted 6 October, 2022;
originally announced October 2022.
-
Explicit high-order symplectic integrators of coupled Schrodinger equations for pump-probe systems
Authors:
Xiaobao Jia,
Qing Jia,
Jianyuan Xiao,
Jian Zheng
Abstract:
Two-beam coupling within the field of nonlinear optics, which transfers energy from one light beam to the other under certain conditions, has received considerable attention in inertial confinement fusion (ICF) and plasma optics. To evaluate the coupling dynamics precisely, we modeled this process with full-wave coupled Schrodinger equations (CSEs) and a nonlinear refractive index. We found that t…
▽ More
Two-beam coupling within the field of nonlinear optics, which transfers energy from one light beam to the other under certain conditions, has received considerable attention in inertial confinement fusion (ICF) and plasma optics. To evaluate the coupling dynamics precisely, we modeled this process with full-wave coupled Schrodinger equations (CSEs) and a nonlinear refractive index. We found that the CSEs constituted a Hamiltonian system and proposed an arbitrary higher-order explicit symplectic algorithm to solve the CSEs numerically. The numerical results given by the developed BEAM code showed a good agreement with those from particle-in-cell simulations, which demonstrated the validity of the model and algorithm. The model and numerical algorithm presented in this work can be extended to more nonlinear optical interactions described by coupled-wave equations.
△ Less
Submitted 27 August, 2022;
originally announced August 2022.
-
Implied Open-circuit Voltage Imaging via a Single Bandpass Filter Method: Its First Application in Perovskite Solar Cells
Authors:
Arman Mahboubi Soufiani,
Robert Lee-Chin,
Paul Fassl,
Md Arafat Mahmud,
Michael E. Pollard,
Jianghui Zheng,
Juergen W. Weber,
Anita Ho-Baillie,
Thorsten Trupke,
Ziv Hameiri
Abstract:
A direct, camera-based implied open-circuit voltage (iVOC) imaging method via the novel use of a single bandpass filter (s-BPF) is developed for large-area photovoltaic solar cells and solar cell precursors. This method images the photoluminescence (PL) emission using a narrow BPF with centre energy in the high-energy tail of the PL emission taking advantage of the close-to-unity absorptivity of t…
▽ More
A direct, camera-based implied open-circuit voltage (iVOC) imaging method via the novel use of a single bandpass filter (s-BPF) is developed for large-area photovoltaic solar cells and solar cell precursors. This method images the photoluminescence (PL) emission using a narrow BPF with centre energy in the high-energy tail of the PL emission taking advantage of the close-to-unity absorptivity of typical photovoltaic devices with low variability in this energy range. As a result, the exact value of the sample's absorptivity within the BPF transmission band is not required. The use of a s-BPF enables the adaptation of a fully contactless approach to calibrate the absolute PL photon flux for camera-based spectrally-integrated imaging tools. The method eliminates the need for knowledge of the imaging system spectral response and the use of the emission and excitation spectral shapes. Through an appropriate choice of the BPF centre energy, a range of absorber compositions or a single absorber with different surface morphologies (e.g., planar vs textured) can be imaged, all without the need for additional detection optics. The feasibility of this s-BPF method is first assessed using a high-quality Cs0.05FA0.79MA0.16Pb(I0.83Br0.17)3 perovskite neat film. The error in iVOC is determined to be less than 1.5%. The efficacy of the method is then demonstrated on device stacks with two different perovskite compositions commonly used in single-junction and monolithic tandem solar cells.
△ Less
Submitted 31 August, 2022; v1 submitted 26 August, 2022;
originally announced August 2022.
-
A photon counting reconstructive spectrometer combining metasurfaces and superconducting nanowire single-photon detectors
Authors:
Jingyuan Zheng,
You Xiao,
Mingzhong Hu,
Yuchen Zhao,
Hao Li,
Lixing You,
Xue Feng,
Fang Liu,
Kaiyu Cui,
Yidong Huang,
Wei Zhang
Abstract:
Faint light spectroscopy has many important applications such as fluorescence spectroscopy, lidar and astronomical observations. However, long measurement time limit its application on real-time measurement. In this work, a photon counting reconstructive spectrometer combining metasurfaces and superconducting nanowire single photon detectors (SNSPDs) was proposed. A prototype device was fabricated…
▽ More
Faint light spectroscopy has many important applications such as fluorescence spectroscopy, lidar and astronomical observations. However, long measurement time limit its application on real-time measurement. In this work, a photon counting reconstructive spectrometer combining metasurfaces and superconducting nanowire single photon detectors (SNSPDs) was proposed. A prototype device was fabricated on a silicon on isolator (SOI) substrate, and its performance was characterized. Experiment results show that this device support spectral reconstruction of mono-color lights with a resolution of 2 nm in the wavelength region of 1500 nm ~ 1600 nm. The detection efficiency of this device is 1.4% ~ 3.2% in this wavelength region. The measurement time required by this photon counting reconstructive spectrometer was also investigated experimentally, showing its potential to be applied in the scenarios requiring real-time measurement.
△ Less
Submitted 19 July, 2022;
originally announced July 2022.
-
High quantum efficiency parametric amplification via hybridized nonlinear optics
Authors:
Noah Flemens,
Dylan Heberle,
Jiaoyang Zheng,
Devin J. Dean,
Connor Davis,
Kevin Zawilski,
Peter G. Schunemann,
Jeffrey Moses
Abstract:
Parametric amplifiers have allowed breakthroughs in ultrafast, strong-field, and high-energy density laser science and are an essential tool for extending the frequency range of powerful emerging diode-pumped solid-state laser technology. However, their impact is limited by inherently low quantum efficiency due to nonuniform light extraction. Here we demonstrate a new type of parametric amplifier…
▽ More
Parametric amplifiers have allowed breakthroughs in ultrafast, strong-field, and high-energy density laser science and are an essential tool for extending the frequency range of powerful emerging diode-pumped solid-state laser technology. However, their impact is limited by inherently low quantum efficiency due to nonuniform light extraction. Here we demonstrate a new type of parametric amplifier based on hybridized nonlinear optics. Hybridization of parametric amplification with idler second harmonic generation induces unusual evolution dynamics for a fully parametric amplifier - with saturating rather than cyclic gain - observed here for the first time. This allows highly uniform light extraction enabling unprecedented efficiency for a lossless amplifier with Gaussian-like intensity profiles - a 48-dB single-stage gain with 68% quantum efficiency and 44% pump-to-signal energy conversion - a several-fold improvement over the standard. Possessing both laser-like high quantum efficiency and the advantages of thermal-loading free parametric systems, this simple approach can be implemented widely and have significant impact by increasing several-fold the power available for science and industry.
△ Less
Submitted 8 July, 2022;
originally announced July 2022.
-
Optimizing doping parameters of target to enhance direct-drive implosion
Authors:
Guannan Zheng,
Tao Tao,
Qing Jia,
Rui Yan,
Jian Zheng
Abstract:
Direct-drive is an important approach to achieving the ignition of inertial confinement fusion. To enhance implosion performance while keeping the risk of hydrodynamic instability at a low level, we have designed a procedure to optimize the parameters of the target doped with mid- or high-$Z$ atoms. In the procedure, a one-dimensional implosion can be automatically simulated, while its implosion p…
▽ More
Direct-drive is an important approach to achieving the ignition of inertial confinement fusion. To enhance implosion performance while keeping the risk of hydrodynamic instability at a low level, we have designed a procedure to optimize the parameters of the target doped with mid- or high-$Z$ atoms. In the procedure, a one-dimensional implosion can be automatically simulated, while its implosion performance and high-dimensional instability are integrally evaluated at the same time. To find the optimal doping parameters, the procedure is performed in the framework of global optimization algorithm, where we have used the particle swarm optimization in the current work. In the optimization, the opacity of mixture materials is quickly obtained by using an interpolation method, showing only a slight difference from the data of TOPS, which is an online doping program of Los Alamos National Laboratory. To test the procedure, optimization has been carried out for the CH ablator in the double cone ignition scheme [Phil. Trans. R. Soc. A. 378.2184 (2020)] by doping with Si and Cl. Both one- and two-dimensional simulations show that doping with either Si or Cl can efficiently mitigate the instability during the acceleration phase and does not result in significant degradation of the peak areal density. The results from one- and two-dimensional simulations qualitatively match with each other, demonstrating the validity of our optimization procedure.
△ Less
Submitted 19 April, 2022;
originally announced April 2022.
-
Laser pulse shape designer for direct-drive inertial confinement fusion
Authors:
Tao Tao,
Guannan Zheng,
Qing Jia,
Rui Yan,
Jian Zheng
Abstract:
A pulse shape designer for direct drive inertial confinement fusion has been developed, it aims at high compression of the fusion fuel while keeping hydrodynamics instability within tolerable level. Fast linear analysis on implosion instability enables the designer to fully scan the vast pulse configuration space at a practical computational cost, machine learning helps to summarize pulse performa…
▽ More
A pulse shape designer for direct drive inertial confinement fusion has been developed, it aims at high compression of the fusion fuel while keeping hydrodynamics instability within tolerable level. Fast linear analysis on implosion instability enables the designer to fully scan the vast pulse configuration space at a practical computational cost, machine learning helps to summarize pulse performance into an implicit scaling metric that promotes the pulse shape evolution. The designer improves its credibility by incorporating various datasets including extra high-precision simulations or experiments. When tested on the double-cone ignition scheme [J. Zhang et al, Phil. Trans. R. Soc. A. 378.2184 (2020)], optimized pulses reach the assembly requirements, show significant imprint mitigation and adiabatic shaping capability, and have the potential to achieve better implosion performance in real experiments. This designer serves as an efficient alternative to traditional empirical pulse shape tuning procedure, reduces workload and time consumption. The designer can be used to quickly explore the unknown parameter space for new direct-drive schemes, assists design iteration and reduces experiment risk.
△ Less
Submitted 8 February, 2023; v1 submitted 19 April, 2022;
originally announced April 2022.
-
Mitigating laser imprint with a foam overcoating
Authors:
D. X. Liu,
T. Tao,
J. Li,
Q. Jia,
J. Zheng
Abstract:
Foam has been suggested to reduce laser imprint because of its low density. In this paper, the two-dimensional radiation hydrodynamic code FLASH is applied to investigate and characterize the strength of laser imprint through analyzing areal density perturbation. There are two important factors for the mitigation of laser imprint besides the thermal smoothing of the conduction region (between the…
▽ More
Foam has been suggested to reduce laser imprint because of its low density. In this paper, the two-dimensional radiation hydrodynamic code FLASH is applied to investigate and characterize the strength of laser imprint through analyzing areal density perturbation. There are two important factors for the mitigation of laser imprint besides the thermal smoothing of the conduction region (between the ablation front and the critical density surface) and the mass ablation of the ablation front. First, radiation ablation dynamically modulates density distribution not only to increase the frequency of the perturbed ablation front oscillation but also to decrease the amplitude of oscillation. Second, a larger length of the shocked compression region reduces the amplitude of the perturbed shock front oscillation. The smaller the perturbation of both ablation front and shock front, the smaller the areal density perturbation. Based on the above physical mechanisms, the optimal way of mitigating laser imprint with foam is that the dynamically modulated density distribution further reduces the amplitude of perturbation reaching the solid CH when the areal density perturbation of foam oscillates to the first minimum value. The optimal ranges of foam parameters to mitigate laser imprint are proposed with the aid of dimensional analysis: the foam thickness is about 2~3 times the perturbation wavelength, and the foam density is about 1/2~3/2 times the mass density corresponding to the critical density.
△ Less
Submitted 19 April, 2022;
originally announced April 2022.
-
Tailoring Terahertz Propagation by Phase and Amplitude Control in Metasurfaces
Authors:
Jingjing Zheng,
Xueqian Zhang,
Lixiang Liu,
Quan Li,
Leena Singh,
Jiaguang Han,
Fengping Yan,
Weili Zhang
Abstract:
Using metasurfaces to control the wave propagation at will has been very successful over the broad electromagnetic spectrum in recent years. By encoding specially designed abrupt changes of electromagnetic parameters into metasurfaces, such as phase and amplitude, nearly arbitrary control over the output wavefronts could be realized. Constituted by a single- or fewlayer of planar structures, metas…
▽ More
Using metasurfaces to control the wave propagation at will has been very successful over the broad electromagnetic spectrum in recent years. By encoding specially designed abrupt changes of electromagnetic parameters into metasurfaces, such as phase and amplitude, nearly arbitrary control over the output wavefronts could be realized. Constituted by a single- or fewlayer of planar structures, metasurfaces are straightforward in design and fabrication, thus promising many realistic applications. Moreover, such control concept can be further extended to the surface wave regime. In this review, we present our recent progress on metasurfaces capable of tailoring the propagation of both free-space and surface terahertz waves. Following an introduction of the basic concept and theory, a number of unique terahertz metasurfaces are presented, showing the ability in devising ultra-thin and compact functional terahertz components.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
The Sabatier principle for Battery Anodes: Chemical Kinetics and Reversible Electrodeposition at Heterointerfaces
Authors:
Jingxu Zheng,
Yue Deng,
Wenzao Li,
Jiefu Yin,
Patrick J. West,
Tian Tang,
Xiao Tong,
David C. Bock,
Shuo Jin,
Qing Zhao,
Regina Garcia-Mendez,
Kenneth J. Takeuchi,
Esther S. Takeuchi,
Amy C. Marschilok,
Lynden A. Archer
Abstract:
How surface chemistry influences reactions occurring thereupon has been a long-standing question of broad scientific and technological interest for centuries. Recently, it has re-emerged as a critical question in a subdiscipline of chemistry - electrochemistry at heterointerphases, where the answers have implications for both how, and in what forms, humanity stores the rising quantities of renewab…
▽ More
How surface chemistry influences reactions occurring thereupon has been a long-standing question of broad scientific and technological interest for centuries. Recently, it has re-emerged as a critical question in a subdiscipline of chemistry - electrochemistry at heterointerphases, where the answers have implications for both how, and in what forms, humanity stores the rising quantities of renewable electric power generated from solar and wind installations world-wide. Here we consider the relation between the surface chemistry at such interphases and the reversibility of electrochemical transformations at a rechargeable battery electrode. Conventional wisdom holds that stronger chemical interaction between the metal deposits and electrode promotes reversibility. We report instead that a moderate strength of chemical interaction between the deposit and the substrate, neither too weak nor too strong, enables highest reversibility and stability of the plating/stripping redox processes at a battery anode. Analogous to the empirical Sabatier principle for chemical heterogeneous catalysis, our finding arises from the confluence of competing processes - one driven by electrochemistry and the other by chemical alloying. Based on experimental evaluation of metal plating/stripping systems in battery anodes of contemporary interest, we show that such knowledge provides a powerful tool for designing key materials in highly reversible electrochemical energy storage technologies based on earth-abundant, low-cost metals.
△ Less
Submitted 25 September, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Reconfigurable Compute-In-Memory on Field-Programmable Ferroelectric Diodes
Authors:
Xiwen Liu,
John Ting,
Yunfei He,
Merrilyn Mercy Adzo Fiagbenu,
Jeffrey Zheng,
Dixiong Wang,
Jonathan Frost,
Pariasadat Musavigharavi,
Giovanni Esteves,
Kim Kisslinger,
Surendra B. Anantharaman,
Eric A. Stach,
Roy H. Olsson III,
Deep Jariwala
Abstract:
The deluge of sensors and data generating devices has driven a paradigm shift in modern computing from arithmetic-logic centric to data centric processing. At a hardware level, this presents an urgent need to integrate dense, high-performance and low-power memory units with Si logic-processor units. However, data-heavy problems such as search and pattern matching also require paradigm changing inn…
▽ More
The deluge of sensors and data generating devices has driven a paradigm shift in modern computing from arithmetic-logic centric to data centric processing. At a hardware level, this presents an urgent need to integrate dense, high-performance and low-power memory units with Si logic-processor units. However, data-heavy problems such as search and pattern matching also require paradigm changing innovations at the circuit and architecture level to enable compute in memory (CIM) operations. CIM architectures that combine data storage yet concurrently offer low-delay and small footprint are highly sought after but have not been realized. Here, we present Aluminum Scandium Nitride (AlScN) ferroelectric diode (FeD) memristor devices that allow for storage, search and neural network-based pattern recognition in a transistor-free architecture. Our devices can be directly integrated on top of Si processors in a scalable, back-end-of-line process. We leverage the field-programmability, non-volatility and non-linearity of FeDs to demonstrated circuit blocks that can support search operations in-situ memory with search delay times < 0.1 ns and a cell footprint < 0.12 um^2. In addition, we demonstrate matrix multiplication operations with 4-bit operation of the FeDs. Our results highlight FeDs as promising candidates for fast, efficient, and multifunctional CIM platforms.
△ Less
Submitted 10 February, 2022;
originally announced February 2022.
-
Universal catastrophe time distributions of dynamically unstable polymers
Authors:
Paul B. Dieterle,
Jenny Zheng,
Ethan Garner,
Ariel Amir
Abstract:
Dynamic instability -- the growth, catastrophe, and shrinkage of quasi-one-dimensional filaments -- has been observed in multiple biopolymers. Scientists have long understood the catastrophic cessation of growth and subsequent depolymerization as arising from the interplay of hydrolysis and polymerization at the tip of the polymer. Here, we show that for a broad class of catastrophe models, the ex…
▽ More
Dynamic instability -- the growth, catastrophe, and shrinkage of quasi-one-dimensional filaments -- has been observed in multiple biopolymers. Scientists have long understood the catastrophic cessation of growth and subsequent depolymerization as arising from the interplay of hydrolysis and polymerization at the tip of the polymer. Here, we show that for a broad class of catastrophe models, the expected catastrophe time distribution is exponential. We show that the distribution shape is insensitive to noise, but that depletion of monomers from a finite pool can dramatically change the distribution shape by reducing the polymerization rate. We derive a form for this finite-pool catastrophe time distribution and show that finite-pool effects can be important even when the depletion of monomers does not greatly alter the polymerization rate.
△ Less
Submitted 10 February, 2022;
originally announced February 2022.
-
Atomically smooth single-crystalline platform for low-loss plasmonic nanocavities
Authors:
Lufang Liu,
Alexey V. Krasavin,
Junsheng Zheng,
Yuanbiao Tong,
Pan Wang,
Xiaofei Wu,
Bert Hecht,
Chenxinyu Pan,
Jialin Li,
Linjun Li,
Xin Guo,
Anatoly V. Zayats,
Limin Tong
Abstract:
Nanoparticle-on-mirror plasmonic nanocavities, capable of extreme optical confinement and enhancement, have triggered state-of-the-art progress in nanophotonics and development of applications in enhanced spectroscopies and molecular detection. However, the optical quality factor and thus performance of these nanoconstructs are undermined by the granular polycrystalline metal films used as a mirro…
▽ More
Nanoparticle-on-mirror plasmonic nanocavities, capable of extreme optical confinement and enhancement, have triggered state-of-the-art progress in nanophotonics and development of applications in enhanced spectroscopies and molecular detection. However, the optical quality factor and thus performance of these nanoconstructs are undermined by the granular polycrystalline metal films used as a mirror. Here, we report an atomically smooth single-crystalline platform for low-loss nanocavities using chemically-synthesized gold microflakes as a mirror. Nanocavities constructed using gold nanorods on such microflakes exhibit a rich structure of plasmonic modes, which are highly sensitive to the thickness of optically-thin (down to ~15 nm) microflakes. The atomically smooth single-crystalline microflakes endow nanocavities with significantly improved quality factor (~2 times) and scattering intensity (~3 times) compared with their counterparts based on deposited films. The developed low-loss nanocavities further allow for the integration with a mature platform of fiber optics, opening opportunities for realizing nanocavity-based miniaturized photonic devices with high performance.
△ Less
Submitted 22 January, 2022;
originally announced January 2022.
-
Ultra-compact Si/In$_2$O$_3$ hybrid plasmonic waveguide modulator with a high bandwidth beyond 40 GHz
Authors:
Yishu Huang,
Jun Zheng,
Bingcheng Pan,
Lijia Song,
Guanan Chen,
Zejie Yu,
Hui Ye,
Daoxin Dai
Abstract:
Optical modulators are required to have high modulation bandwidths and a compact footprint. In this paper we experimentally demonstrate a novel Si/In$_2$O$_3$ hybrid plasmonic waveguide modulator, which is realized by an asymmetric directional coupler (ADC) consisting of a silicon photonic waveguide and a Si/In$_2$O$_3$ hybrid plasmonic waveguide. The optical signal is modulated by radio-frequency…
▽ More
Optical modulators are required to have high modulation bandwidths and a compact footprint. In this paper we experimentally demonstrate a novel Si/In$_2$O$_3$ hybrid plasmonic waveguide modulator, which is realized by an asymmetric directional coupler (ADC) consisting of a silicon photonic waveguide and a Si/In$_2$O$_3$ hybrid plasmonic waveguide. The optical signal is modulated by radio-frequency (RF) signal applied on the Au electrodes at the top of MOS capacitor and contacting the In$_2$O$_3$ thin film. The record-high modulation bandwidth of >40 GHz is realized by a silicon-doping-free metal-oxide-In$_2$O$_3$ capacitor integrated in a 3.5-$μ$m-long asymmetric directional coupler (ADC) for the first time.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
Broadband nonvolatile electrically programmable silicon photonic switches
Authors:
Rui Chen,
Zhuoran Fang,
Johannes E. Fröch,
Peipeng Xu,
Jiajiu Zheng,
Arka Majumdar
Abstract:
Programmable photonic integrated circuits (PICs) have recently gained significant interest due to their potential in creating next-generation technologies ranging from artificial neural networks and microwave photonics to quantum information processing. The fundamental building block of such programmable PICs is a tunable 2 x 2 switch, traditionally controlled by the thermo-optic or free-carrier d…
▽ More
Programmable photonic integrated circuits (PICs) have recently gained significant interest due to their potential in creating next-generation technologies ranging from artificial neural networks and microwave photonics to quantum information processing. The fundamental building block of such programmable PICs is a tunable 2 x 2 switch, traditionally controlled by the thermo-optic or free-carrier dispersion. Yet, these implementations are power-hungry, volatile, and have a large footprint (typically > 100 um). Therefore, a truly 'set-and-forget' type 2 x 2 switch with zero static power consumption is highly desirable for large-scale PICs. Here, we report a broadband nonvolatile electrically programmable 2 x 2 silicon photonic switch based on the phase-change material Ge2Sb2Te5. The directional coupler switch exhibits a compact coupling length (64 um), small insertion loss (<2 dB), and minimal crosstalk (<-8 dB) across the entire telecommunication C-band while maintaining a record-high endurance of over 2,800 switching cycles. This demonstrated switch constitutes a critical component for realizing future generic programmable silicon photonic systems.
△ Less
Submitted 13 January, 2022;
originally announced January 2022.