-
Mass ratio of single-line spectroscopic binaries with visual orbits using Bayesian inference and suitable priors
Authors:
Jennifer Anguita-Aguero,
Rene A. Mendez,
Miguel Videla,
Edgardo Costa,
Leonardo Vanzi,
Nicolas Castro-Morales,
Camila Caballero-Valdes
Abstract:
We present orbital elements for twenty-two single-line binaries, nine of them studied for the first time, determined from a joint spectroscopic and astrometric solution. The astrometry is based on interferometric measurements obtained with the HRCam Speckle camera on the SOAR 4.1m telescope at Cerro Pachon, Chile, supplemented with historical data. The spectroscopic observations were secured using…
▽ More
We present orbital elements for twenty-two single-line binaries, nine of them studied for the first time, determined from a joint spectroscopic and astrometric solution. The astrometry is based on interferometric measurements obtained with the HRCam Speckle camera on the SOAR 4.1m telescope at Cerro Pachon, Chile, supplemented with historical data. The spectroscopic observations were secured using Echelle spectrographs (FEROS, FIDEOS and HARPS) at La Silla, Chile. A comparison of our orbital elements and systemic velocities with previous studies, including Gaia radial velocities, show the robustness of our estimations. By adopting suitable priors of the trigonometric parallax and spectral type of the primary component, and using a Bayesian inference methodology developed by our group, we were able to estimate mass ratios for these binaries. Combining the present results with a previous study of other single-line from our team we present a pseudo mass-to-luminosity relationship based on twenty three systems (45 stars) in the mass range 0.6 <= M_Sun <= 2.5. We find a reasonable correspondence with a fiducial mass-to-luminosity relationship. We conclude that our methodology does allow to derive tentative mass ratios for this type of binaries.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
Optimal observational scheduling framework for binary and multiple stellar systems
Authors:
Miguel Videla,
Rene A. Mendez,
Jorge F. Silva,
Marcos E. Orchard
Abstract:
The optimal instant of observation of astrophysical phenomena for objects that vary on human time-sales is an important problem, as it bears on the cost-effective use of usually scarce observational facilities. In this paper we address this problem for the case of tight visual binary systems through a Bayesian framework based on the maximum entropy sampling principle. Our proposed information-driv…
▽ More
The optimal instant of observation of astrophysical phenomena for objects that vary on human time-sales is an important problem, as it bears on the cost-effective use of usually scarce observational facilities. In this paper we address this problem for the case of tight visual binary systems through a Bayesian framework based on the maximum entropy sampling principle. Our proposed information-driven methodology exploits the periodic structure of binary systems to provide a computationally efficient estimation of the probability distribution of the optimal observation time. We show the optimality of the proposed sampling methodology in the Bayes sense and its effectiveness through direct numerical experiments. We successfully apply our scheme to the study of two visual-spectroscopic binaries, and one purely astrometric triple hierarchical system. We note that our methodology can be applied to any time-evolving phenomena, a particularly interesting application in the era of dedicated surveys, where a definition of the cadence of observations can have a crucial impact on achieving the science goals.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
Bayesian inference in single-line spectroscopic binaries with a visual orbit
Authors:
Miguel Videla,
Rene A. Mendez,
Ruben M. Claveria,
Jorge F. Silva,
Marcos E. Orchard
Abstract:
We present a Bayesian inference methodology for the estimation of orbital parameters on single-line spectroscopic binaries with astrometric data, based on the No-U-Turn sampler Markov chain Monte Carlo algorithm. Our approach is designed to provide a precise and efficient estimation of the joint posterior distribution of the orbital parameters in the presence of partial and heterogeneous observati…
▽ More
We present a Bayesian inference methodology for the estimation of orbital parameters on single-line spectroscopic binaries with astrometric data, based on the No-U-Turn sampler Markov chain Monte Carlo algorithm. Our approach is designed to provide a precise and efficient estimation of the joint posterior distribution of the orbital parameters in the presence of partial and heterogeneous observations. This scheme allows us to directly incorporate prior information about the system - in the form of a trigonometric parallax, and an estimation of the mass of the primary component from its spectral type - to constrain the range of solutions, and to estimate orbital parameters that cannot be usually determined (e.g. the individual component masses), due to the lack of observations or imprecise measurements. Our methodology is tested by analyzing the posterior distributions of well-studied double-line spectroscopic binaries treated as single-line binaries by omitting the radial velocity data of the secondary object. Our results show that the system's mass ratio can be estimated with an uncertainty smaller than 10% using our approach. As a proof of concept, the proposed methodology is applied to twelve single-line spectroscopic binaries with astrometric data that lacked a joint astrometric-spectroscopic solution, for which we provide full orbital elements. Our sample-based methodology allows us also to study the impact of different posterior distributions in the corresponding observations space. This novel analysis provides a better understanding of the effect of the different sources of information on the shape and uncertainty of the orbit and radial velocity curve.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Prototype muon detectors for the AMIGA component of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin
, et al. (429 additional authors not shown)
Abstract:
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary…
▽ More
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary Cell, are to identify and resolve all engineering issues as well as to understand the muon-number counting uncertainties related to the design of the detector. The mechanical design, fabrication and deployment processes of the muon counters of the Unitary Cell are described in this document. These muon counters modules comprise sealed PVC casings containing plastic scintillation bars, wavelength-shifter optical fibers, 64 pixel photomultiplier tubes, and acquisition electronics. The modules are buried approximately 2.25 m below ground level in order to minimize contamination from electromagnetic shower particles. The mechanical setup, which allows access to the electronics for maintenance, is also described in addition to tests of the modules' response and integrity. The completed Unitary Cell has measured a number of air showers of which a first analysis of a sample event is included here.
△ Less
Submitted 12 May, 2016; v1 submitted 5 May, 2016;
originally announced May 2016.
-
Nanosecond-level time synchronization of autonomous radio detector stations for extensive air showers
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila
, et al. (426 additional authors not shown)
Abstract:
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected…
▽ More
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected to have an accuracy no better than about 5 ns. In practice, in particular in AERA, the GPS clocks exhibit drifts on the order of tens of ns. We developed a technique to correct for the GPS drifts, and an independent method is used for cross-checks that indeed we reach nanosecond-scale timing accuracy by this correction. First, we operate a "beacon transmitter" which emits defined sine waves detected by AERA antennas recorded within the physics data. The relative phasing of these sine waves can be used to correct for GPS clock drifts. In addition to this, we observe radio pulses emitted by commercial airplanes, the position of which we determine in real time from Automatic Dependent Surveillance Broadcasts intercepted with a software-defined radio. From the known source location and the measured arrival times of the pulses we determine relative timing offsets between radio detector stations. We demonstrate with a combined analysis that the two methods give a consistent timing calibration with an accuracy of 2 ns or better. Consequently, the beacon method alone can be used in the future to continuously determine and correct for GPS clock drifts in each individual event measured by AERA.
△ Less
Submitted 15 February, 2016; v1 submitted 7 December, 2015;
originally announced December 2015.
-
Digital Electronics for the Pierre Auger Observatory AMIGA Muon Counters
Authors:
O. Wainberg,
A. Almela,
M. Platino,
F. Sanchez,
F. Suarez,
A. Lucero,
M. Videla,
B. Wundheiler,
D. Melo,
M. Hampel,
A. Etchegoyen
Abstract:
The "Auger Muons and Infill for the Ground Array" (AMIGA) project provides direct muon counting capacity to the Pierre Auger Observatory and extends its energy detection range down to 0.3 EeV. It currently consists of 61 detector pairs (a Cherenkov surface detector and a buried muon counter) distributed over a 23.5 km2 area on a 750 m triangular grid. Each counter relies on segmented scintillator…
▽ More
The "Auger Muons and Infill for the Ground Array" (AMIGA) project provides direct muon counting capacity to the Pierre Auger Observatory and extends its energy detection range down to 0.3 EeV. It currently consists of 61 detector pairs (a Cherenkov surface detector and a buried muon counter) distributed over a 23.5 km2 area on a 750 m triangular grid. Each counter relies on segmented scintillator modules storing a logical train of '0's and '1's on each scintillator segment at a given time slot. Muon counter data is sampled and stored at 320 MHz allowing both the detection of single photoelectrons and the implementation of an offline trigger designed to mitigate multi-pixel PMT crosstalk and dark rate undesired effects. Acquisition is carried out by the digital electronics built around a low power Cyclone III FPGA. This paper presents the digital electronics design, internal and external synchronization schemes, hardware tests, and first results from the Observatory.
△ Less
Submitted 14 January, 2014; v1 submitted 26 December, 2013;
originally announced December 2013.
-
The Pierre Auger Observatory V: Enhancements
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Ongoing and planned enhancements of the Pierre Auger Observatory
Ongoing and planned enhancements of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
-
The Pierre Auger Observatory IV: Operation and Monitoring
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Technical reports on operations and monitoring of the Pierre Auger Observatory
Technical reports on operations and monitoring of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.