Showing 1–50 of 60 results for author: Park, H S

Lowering threshold of NaI(Tl) scintillator to 0.7 keV in the COSINE-100 experiment

Authors: G. H. Yu, N. Carlin, J. Y. Cho, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. França, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, D. H. Lee , et al. (34 additional authors not shown)

Abstract: COSINE-100 is a direct dark matter search experiment, with the primary goal of testing the annual modulation signal observed by DAMA/LIBRA, using the same target material, NaI(Tl). In previous analyses, we achieved the same 1 keV energy threshold used in the DAMA/LIBRA's analysis that reported an annual modulation signal with 11.6$σ$ significance. In this article, we report an improved analysis th… ▽ More COSINE-100 is a direct dark matter search experiment, with the primary goal of testing the annual modulation signal observed by DAMA/LIBRA, using the same target material, NaI(Tl). In previous analyses, we achieved the same 1 keV energy threshold used in the DAMA/LIBRA's analysis that reported an annual modulation signal with 11.6$σ$ significance. In this article, we report an improved analysis that lowered the threshold to 0.7 keV, thanks to the application of Multi-Layer Perception network and a new likelihood parameter with waveforms in the frequency domain. The lower threshold would enable a better comparison of COSINE-100 with new DAMA results with a 0.75 keV threshold and account for differences in quenching factors. Furthermore the lower threshold can enhance COSINE-100's sensitivity to sub-GeV dark matter searches. △ Less

Submitted 26 August, 2024; originally announced August 2024.

Improved background modeling for dark matter search with COSINE-100

Authors: G. H. Yu, N. Carlin, J. Y. Cho, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Franca, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, D. H. Lee , et al. (33 additional authors not shown)

Abstract: COSINE-100 aims to conclusively test the claimed dark matter annual modulation signal detected by DAMA/LIBRA collaboration. DAMA/LIBRA has released updated analysis results by lowering the energy threshold to 0.75 keV through various upgrades. They have consistently claimed to have observed the annual modulation. In COSINE-100, it is crucial to lower the energy threshold for a direct comparison wi… ▽ More COSINE-100 aims to conclusively test the claimed dark matter annual modulation signal detected by DAMA/LIBRA collaboration. DAMA/LIBRA has released updated analysis results by lowering the energy threshold to 0.75 keV through various upgrades. They have consistently claimed to have observed the annual modulation. In COSINE-100, it is crucial to lower the energy threshold for a direct comparison with DAMA/LIBRA, which also enhances the sensitivity of the search for low-mass dark matter, enabling COSINE-100 to explore this area. Therefore, it is essential to have a precise and quantitative understanding of the background spectrum across all energy ranges. This study expands the background modeling from 0.7 to 4000 keV using 2.82 years of COSINE-100 data. The modeling has been improved to describe the background spectrum across all energy ranges accurately. Assessments of the background spectrum are presented, considering the nonproportionality of NaI(Tl) crystals at both low and high energies and the characteristic X-rays produced by the interaction of external backgrounds with materials such as copper. Additionally, constraints on the fit parameters obtained from the alpha spectrum modeling fit are integrated into this model. These improvements are detailed in the paper. △ Less

Submitted 19 August, 2024; originally announced August 2024.

Development of MMC-based lithium molybdate cryogenic calorimeters for AMoRE-II

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, H. Bae, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, S. Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Y. M. Gavrilyuk, A. M. Gezhaev , et al. (84 additional authors not shown)

Abstract: The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is und… ▽ More The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is under construction.This paper discusses the baseline design and characterization of the lithium molybdate cryogenic calorimeters to be used in the AMoRE-II detector modules. The results from prototype setups that incorporate new housing structures and two different crystal masses (316 g and 517 - 521 g), operated at 10 mK temperature, show energy resolutions (FWHM) of 7.55 - 8.82 keV at the 2.615 MeV $^{208}$Tl $γ$ line, and effective light detection of 0.79 - 0.96 keV/MeV. The simultaneous heat and light detection enables clear separation of alpha particles with a discrimination power of 12.37 - 19.50 at the energy region around $^6$Li(n, $α$)$^3$H with Q-value = 4.785 MeV. Promising detector performances were demonstrated at temperatures as high as 30 mK, which relaxes the temperature constraints for operating the large AMoRE-II array. △ Less

Submitted 16 July, 2024; originally announced July 2024.

Projected background and sensitivity of AMoRE-II

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, Seonho Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Y. M. Gavrilyuk, A. M. Gezhaev, O. Gileva , et al. (81 additional authors not shown)

Abstract: AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap… ▽ More AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Machine Learning-Guided Design of Non-Reciprocal and Asymmetric Elastic Chiral Metamaterials

Authors: Lingxiao Yuan, Emma Lejeune, Harold S. Park

Abstract: There has been significant recent interest in the mechanics community to design structures that can either violate reciprocity, or exhibit elastic asymmetry or odd elasticity. While these properties are highly desirable to enable mechanical metamaterials to exhibit novel wave propagation phenomena, it remains an open question as to how to design passive structures that exhibit both significant non… ▽ More There has been significant recent interest in the mechanics community to design structures that can either violate reciprocity, or exhibit elastic asymmetry or odd elasticity. While these properties are highly desirable to enable mechanical metamaterials to exhibit novel wave propagation phenomena, it remains an open question as to how to design passive structures that exhibit both significant non-reciprocity and elastic asymmetry. In this paper, we first define several design spaces for chiral metamaterials leveraging specific design parameters, including the ligament contact angles, the ligament shape, and circle radius. Having defined the design spaces, we then leverage machine learning approaches, and specifically Bayesian optimization, to determine optimally performing designs within each design space satisfying maximal non-reciprocity or stiffness asymmetry. Finally, we perform multi-objective optimization by determining the Pareto optimum and find chiral metamaterials that simultaneously exhibit high non-reciprocity and stiffness asymmetry. Our analysis of the underlying mechanisms reveals that chiral metamaterials that can display multiple different contact states under loading in different directions are able to simultaneously exhibit both high non-reciprocity and stiffness asymmetry. Overall, this work demonstrates the effectiveness of employing ML to bring insights to a novel domain with limited prior information, and more generally will pave the way for metamaterials with unique properties and functionality in directing and guiding mechanical wave energy. △ Less

Submitted 19 April, 2024; originally announced April 2024.

Measurements of low-energy nuclear recoil quenching factors for Na and I recoils in the NaI(Tl) scintillator

Authors: S. H. Lee, H. W. Joo, H. J. Kim, K. W. Kim, S. K. Kim, Y. D. Kim, Y. J. Ko, H. S. Lee, J. Y. Lee, H. S. Park, Y. S. Yoon

Abstract: Elastic scattering off nuclei in target detectors, involving interactions with dark matter and coherent elastic neutrino nuclear recoil (CE$ν$NS), results in the deposition of low energy within the nuclei, dissipating rapidly through a combination of heat and ionization. The primary energy loss mechanism for nuclear recoil is heat, leading to consistently smaller measurable scintillation signals c… ▽ More Elastic scattering off nuclei in target detectors, involving interactions with dark matter and coherent elastic neutrino nuclear recoil (CE$ν$NS), results in the deposition of low energy within the nuclei, dissipating rapidly through a combination of heat and ionization. The primary energy loss mechanism for nuclear recoil is heat, leading to consistently smaller measurable scintillation signals compared to electron recoils of the same energy. The nuclear recoil quenching factor (QF), representing the ratio of scintillation light yield produced by nuclear recoil to that of electron recoil at the same energy, is a critical parameter for understanding dark matter and neutrino interactions with nuclei. The low energy QF of NaI(Tl) crystals, commonly employed in dark matter searches and CE$ν$NS measurements, is of substantial importance. Previous low energy QF measurements were constrained by contamination from photomultiplier tube (PMT)-induced noise, resulting in an observed light yield of approximately 15 photoelectrons per keVee (kilo-electron-volt electron-equivalent energy) and nuclear recoil energy above 5 keVnr (kilo-electron-volt nuclear recoil energy). Through enhanced crystal encapsulation, an increased light yield of around 26 photoelectrons per keVee is achieved. This improvement enables the measurement of the nuclear recoil QF for sodium nuclei at an energy of 3.8 $\pm$ 0.6 keVnr with a QF of 11.2 $\pm$ 1.7%. Furthermore, a reevaluation of previously reported QF results is conducted, incorporating enhancements in low energy events based on waveform simulation. The outcomes are generally consistent with various recent QF measurements for sodium and iodine. △ Less

Submitted 8 July, 2024; v1 submitted 23 February, 2024; originally announced February 2024.

Nonproportionality of NaI(Tl) Scintillation Detector for Dark Matter Search Experiments

Authors: S. M. Lee, G. Adhikari, N. Carlin, J. Y. Cho, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Fran. a, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, S. W. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim , et al. (37 additional authors not shown)

Abstract: We present a comprehensive study of the nonproportionality of NaI(Tl) scintillation detectors within the context of dark matter search experiments. Our investigation, which integrates COSINE-100 data with supplementary $γ$ spectroscopy, measures light yields across diverse energy levels from full-energy $γ$ peaks produced by the decays of various isotopes. These $γ$ peaks of interest were produced… ▽ More We present a comprehensive study of the nonproportionality of NaI(Tl) scintillation detectors within the context of dark matter search experiments. Our investigation, which integrates COSINE-100 data with supplementary $γ$ spectroscopy, measures light yields across diverse energy levels from full-energy $γ$ peaks produced by the decays of various isotopes. These $γ$ peaks of interest were produced by decays supported by both long and short-lived isotopes. Analyzing peaks from decays supported only by short-lived isotopes presented a unique challenge due to their limited statistics and overlapping energies, which was overcome by long-term data collection and a time-dependent analysis. A key achievement is the direct measurement of the 0.87 keV light yield, resulting from the cascade following electron capture decay of $^{22}$Na from internal contamination. This measurement, previously accessible only indirectly, deepens our understanding of NaI(Tl) scintillator behavior in the region of interest for dark matter searches. This study holds substantial implications for background modeling and the interpretation of dark matter signals in NaI(Tl) experiments. △ Less

Submitted 10 May, 2024; v1 submitted 14 January, 2024; originally announced January 2024.

Comments: 12 pages, 7 figures

Journal ref: Eur. Phys. J. C 84 (2024) 484

Alpha backgrounds in NaI(Tl) crystals of COSINE-100

Authors: G. Adhikari, N. Carlin, D. F. F. S. Cavalcante, J. Y. Cho, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Franca, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, S. W. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim , et al. (38 additional authors not shown)

Abstract: COSINE-100 is a dark matter direct detection experiment with 106 kg NaI(Tl) as the target material. 210Pb and daughter isotopes are a dominant background in the WIMP region of interest and are detected via beta decay and alpha decay. Analysis of the alpha channel complements the background model as observed in the beta/gamma channel. We present the measurement of the quenching factors and Monte Ca… ▽ More COSINE-100 is a dark matter direct detection experiment with 106 kg NaI(Tl) as the target material. 210Pb and daughter isotopes are a dominant background in the WIMP region of interest and are detected via beta decay and alpha decay. Analysis of the alpha channel complements the background model as observed in the beta/gamma channel. We present the measurement of the quenching factors and Monte Carlo simulation results and activity quantification of the alpha decay components of the COSINE-100 NaI(Tl) crystals. The data strongly indicate that the alpha decays probabilistically undergo two possible quenching factors but require further investigation. The fitted results are consistent with independent measurements and improve the overall understanding of the COSINE-100 backgrounds. Furthermore, the half-life of 216Po has been measured to be 143.4 +/- 1.2 ms, which is consistent with and more precise than recent measurements. △ Less

Submitted 30 January, 2024; v1 submitted 8 November, 2023; originally announced November 2023.

Search for inelastic WIMP-iodine scattering with COSINE-100

Authors: G. Adhikari, N. Carlin, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Franca, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, J. H. Jo, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, D. H. Lee , et al. (34 additional authors not shown)

Abstract: We report the results of a search for inelastic scattering of weakly interacting massive particles (WIMPs) off $^{127}$I nuclei using NaI(Tl) crystals with a data exposure of 97.7 kg$\cdot$years from the COSINE-100 experiment. The signature of inelastic WIMP-$^{127}$I scattering is a nuclear recoil accompanied by a 57.6 keV $γ$-ray from the prompt deexcitation, producing a more energetic signal co… ▽ More We report the results of a search for inelastic scattering of weakly interacting massive particles (WIMPs) off $^{127}$I nuclei using NaI(Tl) crystals with a data exposure of 97.7 kg$\cdot$years from the COSINE-100 experiment. The signature of inelastic WIMP-$^{127}$I scattering is a nuclear recoil accompanied by a 57.6 keV $γ$-ray from the prompt deexcitation, producing a more energetic signal compared to the typical WIMP nuclear recoil signal. We found no evidence for this inelastic scattering signature and set a 90 $\%$ confidence level upper limit on the WIMP-proton spin-dependent, inelastic scattering cross section of $1.2 \times 10^{-37} {\rm cm^{2}}$ at the WIMP mass 500 ${\rm GeV/c^{2}}$. △ Less

Submitted 30 October, 2023; v1 submitted 19 July, 2023; originally announced July 2023.

Comments: 8 pages, 5 figures. arXiv admin note: text overlap with arXiv:2104.03537

Journal ref: Phys. Rev. D 108, 092006 (2023)

Search for bosonic super-weakly interacting massive particles at COSINE-100

Authors: G. Adhikari, N. Carlin, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Franca, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, J. H. Jo, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, D. H. Lee , et al. (34 additional authors not shown)

Abstract: We present results of a search for bosonic super-weakly interacting massive particles (BSW) as keV scale dark matter candidates that is based on an exposure of 97.7 kg$\cdot$year from the COSINE experiment. In this search, we employ, for the first time, Compton-like as well as absorption processes for pseudoscalar and vector BSWs. No evidence for BSWs is found in the mass range from 10… ▽ More We present results of a search for bosonic super-weakly interacting massive particles (BSW) as keV scale dark matter candidates that is based on an exposure of 97.7 kg$\cdot$year from the COSINE experiment. In this search, we employ, for the first time, Compton-like as well as absorption processes for pseudoscalar and vector BSWs. No evidence for BSWs is found in the mass range from 10 $\mathrm{keV/c}^2$ to 1 $\mathrm{MeV/c}^2$, and we present the exclusion limits on the dimensionless coupling constants to electrons $g_{ae}$ for pseudoscalar and $κ$ for vector BSWs at 90% confidence level. Our results show that these limits are improved by including the Compton-like process in masses of BSW, above $\mathcal{O}(100\,\mathrm{keV/c}^2)$. △ Less

Submitted 27 August, 2023; v1 submitted 3 April, 2023; originally announced April 2023.

Journal ref: Phys. Rev. D 108 (2023) L041301

Nonlinear ill-posed problem in low-dose dental cone-beam computed tomography

Authors: Hyoung Suk Park, Chang Min Hyun, Jin Keun Seo

Abstract: This paper describes the mathematical structure of the ill-posed nonlinear inverse problem of low-dose dental cone-beam computed tomography (CBCT) and explains the advantages of a deep learning-based approach to the reconstruction of computed tomography images over conventional regularization methods. This paper explains the underlying reasons why dental CBCT is more ill-posed than standard comput… ▽ More This paper describes the mathematical structure of the ill-posed nonlinear inverse problem of low-dose dental cone-beam computed tomography (CBCT) and explains the advantages of a deep learning-based approach to the reconstruction of computed tomography images over conventional regularization methods. This paper explains the underlying reasons why dental CBCT is more ill-posed than standard computed tomography. Despite this severe ill-posedness, the demand for dental CBCT systems is rapidly growing because of their cost competitiveness and low radiation dose. We then describe the limitations of existing methods in the accurate restoration of the morphological structures of teeth using dental CBCT data severely damaged by metal implants. We further discuss the usefulness of panoramic images generated from CBCT data for accurate tooth segmentation. We also discuss the possibility of utilizing radiation-free intra-oral scan data as prior information in CBCT image reconstruction to compensate for the damage to data caused by metal implants. △ Less

Submitted 2 March, 2023; originally announced March 2023.

Machine Learning Assisted Design and Optimization of Transition Metal-Incorporated Carbon Quantum Dot Catalysts for Hydrogen Evolution Reaction

Authors: Duong Nguyen Nguyen, Min-Cheol Kim, Unbeom Baeck, Jaehyoung Lim, Namsoo Shin, Jaekook Kim, Heechae Choi, Ho Seok Park, Uk Sim, Jung Kyu Kim

Abstract: Development of cost-effective hydrogen evolution reaction (HER) catalysts with outstanding catalytic activity, replacing cost-prohibitive noble metal-based catalysts, is critical for practical green hydrogen production. A popular strategy for promoting the catalytic performance of noble metal-free catalysts is to incorporate earth-abundant transition metal (TM) atoms into nanocarbon platforms such… ▽ More Development of cost-effective hydrogen evolution reaction (HER) catalysts with outstanding catalytic activity, replacing cost-prohibitive noble metal-based catalysts, is critical for practical green hydrogen production. A popular strategy for promoting the catalytic performance of noble metal-free catalysts is to incorporate earth-abundant transition metal (TM) atoms into nanocarbon platforms such as carbon quantum dots (CQDs). Although data-driven catalyst design methods can significantly accelerate the rational design of TM element-doped CQD (M@CQD) catalysts, they suffer from either a simplified theoretical model or the prohibitive cost and complexity of experimental data generation. In this study, we propose an effective and facile HER catalyst design strategy based on machine learning (ML) and ML model verification using electrochemical methods accompanied with density functional theory (DFT) simulations. Based on a Bayesian genetic algorithm (BGA) ML model, the Ni@CQD catalyst on a three-dimensional reduced graphene oxide (3D rGO) conductor is proposed as the best HER catalyst under the optimal conditions of catalyst loading, electrode type, and temperature and pH of electrolyte. We validate the ML results with electrochemical experiments, where the Ni@CQD catalyst exhibited superior HER activity, requiring an overpotential of 189 mV to achieve 10 mA cm-2 with a Tafel slope of 52 mV dec-1 and impressive durability in acidic media. We expect that this methodology and the excellent performance of the Ni@CQD catalyst provide an effective route for the rational design of highly active electrocatalysts for commercial applications. △ Less

Submitted 26 October, 2022; originally announced October 2022.

A lab scale experiment for keV sterile neutrino search

Authors: Y. C. Lee, H. B. Kim, H. L. Kim, S. K. Kim, Y. H. Kim, D. H. Kwon, H. S. Lim, H. S. Park, K. R. Woo, Y. S. Yoon

Abstract: We developed a simple small-scale experiment to measure the beta decay spectrum of $^{3}$H. The aim of this research is to investigate the presence of sterile neutrinos in the keV region. Tritium nuclei were embedded in a 1$\times$1$\times$1 cm$^3$ LiF crystal from the $^6$Li(n,$α$)$^3$H reaction. The energy of the beta electrons absorbed in the LiF crystal was measured with a magnetic microcalori… ▽ More We developed a simple small-scale experiment to measure the beta decay spectrum of $^{3}$H. The aim of this research is to investigate the presence of sterile neutrinos in the keV region. Tritium nuclei were embedded in a 1$\times$1$\times$1 cm$^3$ LiF crystal from the $^6$Li(n,$α$)$^3$H reaction. The energy of the beta electrons absorbed in the LiF crystal was measured with a magnetic microcalorimeter at 40 mK. We report a new method of sample preparation, experiments, and analysis of $^3$H beta measurements. The spectrum of a 10-hour measurement agrees well with the expected spectrum of $^3$H beta decay. The analysis results indicate that this method can be used to search for keV-scale sterile neutrinos. △ Less

Submitted 21 October, 2022; v1 submitted 20 October, 2022; originally announced October 2022.

Indefinite and Bidirectional Near Infrared Nanocrystal Photoswitching

Authors: Changhwan Lee, Emma Z. Xu, Kevin W. C. Kwock, Ayelet Teitelboim, Yawei Liu, Natalie Fardian-Melamed, Cassio C. S. Pedroso, Hye Sun Park, Jongwoo Kim, Stefanie D. Pritzl, Sang Hwan Nam, Theobald Lohmueller, Peter Ercius, Yung Doug Suh, Bruce E Cohen, Emory M Chan, P. James Schuck

Abstract: Materials whose luminescence can be switched by optical stimulation drive technologies ranging from superresolution imaging1-4, nanophotonics5, and optical data storage6-8, to targeted pharmacology, optogenetics, and chemical reactivity9. These photoswitchable probes, including organic fluorophores and proteins, are prone to photodegradation, and often require phototoxic doses of ultraviolet (UV)… ▽ More Materials whose luminescence can be switched by optical stimulation drive technologies ranging from superresolution imaging1-4, nanophotonics5, and optical data storage6-8, to targeted pharmacology, optogenetics, and chemical reactivity9. These photoswitchable probes, including organic fluorophores and proteins, are prone to photodegradation, and often require phototoxic doses of ultraviolet (UV) or visible light. Colloidal inorganic nanoparticles have significant stability advantages over existing photoswitchable materials, but the ability to switch emission bidirectionally, particularly with NIR light, has not been reported with nanoparticles. Here, we present 2-way, near-infrared (NIR) photoswitching of avalanching nanoparticles (ANPs), showing full optical control of upconverted emission using phototriggers in the NIR-I and NIR-II spectral regions useful for subsurface imaging. Employing single-step photodarkening10-13 and photobrightening12,14-18, we demonstrate indefinite photoswitching of individual nanoparticles (>1000 cycles over 7 h) in ambient or aqueous conditions without measurable photodegradation. Critical steps of the photoswitching mechanism are elucidated by modeling and by measuring the photon avalanche properties of single ANPs in both bright and dark states. Unlimited, reversible photoswitching of ANPs enables indefinitely rewritable 2D and 3D multi-level optical patterning of ANPs, as well as optical nanoscopy with sub-Å localization superresolution that allows us to distinguish individual ANPs within tightly packed clusters. △ Less

Submitted 13 September, 2022; originally announced September 2022.

Comments: 15 pages, 5 figures

Towards out of distribution generalization for problems in mechanics

Authors: Lingxiao Yuan, Harold S. Park, Emma Lejeune

Abstract: There has been a massive increase in research interest towards applying data driven methods to problems in mechanics. While traditional machine learning (ML) methods have enabled many breakthroughs, they rely on the assumption that the training (observed) data and testing (unseen) data are independent and identically distributed (i.i.d). Thus, traditional ML approaches often break down when applie… ▽ More There has been a massive increase in research interest towards applying data driven methods to problems in mechanics. While traditional machine learning (ML) methods have enabled many breakthroughs, they rely on the assumption that the training (observed) data and testing (unseen) data are independent and identically distributed (i.i.d). Thus, traditional ML approaches often break down when applied to real world mechanics problems with unknown test environments and data distribution shifts. In contrast, out-of-distribution (OOD) generalization assumes that the test data may shift (i.e., violate the i.i.d. assumption). To date, multiple methods have been proposed to improve the OOD generalization of ML methods. However, because of the lack of benchmark datasets for OOD regression problems, the efficiency of these OOD methods on regression problems, which dominate the mechanics field, remains unknown. To address this, we investigate the performance of OOD generalization methods for regression problems in mechanics. Specifically, we identify three OOD problems: covariate shift, mechanism shift, and sampling bias. For each problem, we create two benchmark examples that extend the Mechanical MNIST dataset collection, and we investigate the performance of popular OOD generalization methods on these mechanics-specific regression problems. Our numerical experiments show that in most cases, while the OOD generalization algorithms perform better compared to traditional ML methods on these OOD problems, there is a compelling need to develop more robust OOD generalization methods that are effective across multiple OOD scenarios. Overall, we expect that this study, as well as the associated open access benchmark datasets, will enable further development of OOD generalization methods for mechanics specific regression problems. △ Less

Submitted 13 August, 2022; v1 submitted 29 June, 2022; originally announced June 2022.

Journal ref: Comput. Methods Appl. Mech. Engrg. 400 (2022) 115569

Three-year annual modulation search with COSINE-100

Authors: COSINE-100 Collaboration, :, G. Adhikari, E. Barbosa de Souza, N. Carlin, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. França, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, J. H. Jo, H. W. Joo, W. G. Kang, M. Kauer, H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, W. K. Kim, Y. D. Kim , et al. (34 additional authors not shown)

Abstract: COSINE-100 is a direct detection dark matter experiment that aims to test DAMA/LIBRA's claim of dark matter discovery by searching for a dark matter-induced annual modulation signal with NaI(Tl) detectors. We present new constraints on the annual modulation signal from a dataset with a 2.82 yr livetime utilizing an active mass of 61.3 kg, for a total exposure of 173 kg$\cdot$yr. This new result fe… ▽ More COSINE-100 is a direct detection dark matter experiment that aims to test DAMA/LIBRA's claim of dark matter discovery by searching for a dark matter-induced annual modulation signal with NaI(Tl) detectors. We present new constraints on the annual modulation signal from a dataset with a 2.82 yr livetime utilizing an active mass of 61.3 kg, for a total exposure of 173 kg$\cdot$yr. This new result features an improved event selection that allows for both lowering the energy threshold to 1 keV and a more precise time-dependent background model. In the 1-6 keV and 2-6 keV energy intervals, we observe best-fit values for the modulation amplitude of 0.0067$\pm$0.0042 and 0.0051$\pm$0.0047 counts/(day$\cdot$kg$\cdot$keV), respectively, with a phase fixed at 152.5 days. △ Less

Submitted 28 October, 2022; v1 submitted 16 November, 2021; originally announced November 2021.

Comments: 11 pages, 8 figures

Journal ref: Phys. Rev. D 106, 052005 (2022)

Encryption Device Based on Wave-Chaos for Enhanced Physical Security of Wireless Wave Transmission

Authors: Hong Soo Park, Sun K. Hong

Abstract: We introduce an encryption device based on wave-chaos to enhance the physical security of wireless wave transmission. The proposed encryption device is composed of a compact quasi-2D disordered cavity, where transmit signals pass through to be distorted in time before transmission. On the receiving end, the signals can only be decrypted when they pass through an identical cavity. In the absence of… ▽ More We introduce an encryption device based on wave-chaos to enhance the physical security of wireless wave transmission. The proposed encryption device is composed of a compact quasi-2D disordered cavity, where transmit signals pass through to be distorted in time before transmission. On the receiving end, the signals can only be decrypted when they pass through an identical cavity. In the absence of a proper decryption device, the signals cannot be properly decrypted. If a cavity with a different shape is used on the receiving end, vastly different wave dynamics will prevent the signals from being decrypted, causing them to appear as noise. We experimentally demonstrate the proposed concept in an apparatus representing a wireless link. △ Less

Submitted 23 September, 2021; originally announced September 2021.

Alpha backgrounds in the AMoRE-Pilot experiment

Authors: V. Alenkov, H. W. Bae, J. Beyer, R. S. Boiko, K. Boonin, O. Buzanov, N. Chanthima, M. K. Cheoun, S. H. Choi, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. Gangapshev, L. Gastaldo, Yu. M. Gavriljuk, A. Gezhaev, V. D. Grigoryeva, V. Gurentsov, D. H. Ha, C. Ha, E. J. Ha, I. Hahn, E. J. Jeon , et al. (81 additional authors not shown)

Abstract: The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit… ▽ More The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model. △ Less

Submitted 5 December, 2022; v1 submitted 16 July, 2021; originally announced July 2021.

The environmental monitoring system at the COSINE-100 experiment

Authors: H. Kim, G. Adhikari, E. Barbosa de Souza, N. Carlin, J. J. Choi, S. Choi, M. Djamal, A. C. Ezeribe, L. E. França, C. Ha, I. S. Hahn, E. J. Jeon, J. H. Jo, H. W. Joo, W. G. Kang, M. Kauer, H. J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, E. K. Lee , et al. (28 additional authors not shown)

Abstract: The COSINE-100 experiment is designed to test the DAMA experiment which claimed an observation of a dark matter signal from an annual modulation in their residual event rate. To measure the 1 %-level signal amplitude, it is crucial to control and monitor nearly all environmental quantities that might systematically mimic the signal. The environmental monitoring also helps ensure a stable operation… ▽ More The COSINE-100 experiment is designed to test the DAMA experiment which claimed an observation of a dark matter signal from an annual modulation in their residual event rate. To measure the 1 %-level signal amplitude, it is crucial to control and monitor nearly all environmental quantities that might systematically mimic the signal. The environmental monitoring also helps ensure a stable operation of the experiment. Here, we describe the design and performance of the centralized environmental monitoring system for the COSINE-100 experiment. △ Less

Submitted 28 November, 2021; v1 submitted 15 July, 2021; originally announced July 2021.

Comments: 13 pages, 11 figures

Mechanical activity and odd elasticity of passive, 2D chiral metamaterials

Authors: Mohamed Shaat, Harold S. Park

Abstract: We demonstrate a general route to making active, odd elastic solids from passive chiral elements that can act as sources of mechanical work by violating static equilibrium without internal sources of energy or momentum. We further demonstrate that by starting from a discrete, Newtonian mechanics viewpoint of the chiral unit cell, we can develop the continuum field equations for isotropic 2D chiral… ▽ More We demonstrate a general route to making active, odd elastic solids from passive chiral elements that can act as sources of mechanical work by violating static equilibrium without internal sources of energy or momentum. We further demonstrate that by starting from a discrete, Newtonian mechanics viewpoint of the chiral unit cell, we can develop the continuum field equations for isotropic 2D chiral metamaterials that reveal odd elasticity, while elucidating the structure-property relationships underpinning the chiral, elastic moduli that enable the mechanical activity of the chiral metamaterials. By demonstrating the energy gain of chiral metamaterials as they undergo quasistatic deformation cycles, we show a new route to designing active, non-reciprocal mechanical metamaterials that can operate at zero frequency. △ Less

Submitted 10 September, 2021; v1 submitted 21 June, 2021; originally announced June 2021.

Comments: 6 pages, 2 figures

Lowering the energy threshold in COSINE-100 dark matter searches

Authors: G. Adhikari, E. Barbosa de Souza, N. Carlin, J. J. Choi, S. Choi, M. Djamal, A. C. Ezeribe, L. E. Franca, C. Ha, I. S. Hahn, E. J. Jeon, J. H. Jo, W. G. Kang, M. Kauer, H. Kim, H. J. Kim, K. W. Kim, S. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, E. K. Lee, H. S. Lee, J. Lee, J. Y. Lee , et al. (21 additional authors not shown)

Abstract: COSINE-100 is a dark matter detection experiment that uses NaI(Tl) crystal detectors operating at the Yangyang underground laboratory in Korea since September 2016. Its main goal is to test the annual modulation observed by the DAMA/LIBRA experiment with the same target medium. Recently DAMA/LIBRA has released data with an energy threshold lowered to 1 keV, and the persistent annual modulation beh… ▽ More COSINE-100 is a dark matter detection experiment that uses NaI(Tl) crystal detectors operating at the Yangyang underground laboratory in Korea since September 2016. Its main goal is to test the annual modulation observed by the DAMA/LIBRA experiment with the same target medium. Recently DAMA/LIBRA has released data with an energy threshold lowered to 1 keV, and the persistent annual modulation behavior is still observed at 9.5$σ$. By lowering the energy threshold for electron recoils to 1 keV, COSINE-100 annual modulation results can be compared to those of DAMA/LIBRA in a model-independent way. Additionally, the event selection methods provide an access to a few to sub-GeV dark matter particles using constant rate studies. In this article, we discuss the COSINE-100 event selection algorithm, its validation, and efficiencies near the threshold. △ Less

Submitted 21 March, 2021; v1 submitted 28 May, 2020; originally announced May 2020.

Measurement of the cosmic muon annual and diurnal flux variation with the COSINE-100 detector

Authors: COSINE-100 Collaboration, :, H. Prihtiadi, G. Adhikari, E. Barbosa de Souza, N. Carlin, J. J. Choi, S. Choi, M. Djamal, A. C. Ezeribe, L. E. França, C. Ha, I. S. Hahn, E. J. Jeon, J. H. Jo, W. G. Kang, M. Kauer, H. Kim, H. J. Kim, K. W. Kim, S. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, E. K. Lee , et al. (23 additional authors not shown)

Abstract: We report measurements of annual and diurnal modulations of the cosmic-ray muon rate in the Yangyang underground laboratory (Y2L) using 952 days of COSINE-100 data acquired between September 2016 and July 2019. A correlation of the muon rate with the atmospheric temperature is observed and its amplitude on the muon rate is determined. The effective atmospheric temperature and muon rate variations… ▽ More We report measurements of annual and diurnal modulations of the cosmic-ray muon rate in the Yangyang underground laboratory (Y2L) using 952 days of COSINE-100 data acquired between September 2016 and July 2019. A correlation of the muon rate with the atmospheric temperature is observed and its amplitude on the muon rate is determined. The effective atmospheric temperature and muon rate variations are positively correlated with a measured effective temperature coefficient of $α_{T}$ = 0.80 $\pm$ 0.11. This result is consistent with a model of meson production in the atmosphere. We also searched for a diurnal modulation in the underground muon rate by comparing one-hour intervals. No significant diurnal modulation of the muon rate was observed. △ Less

Submitted 28 May, 2020; v1 submitted 27 May, 2020; originally announced May 2020.

Comments: 12 pages, 9 figures

The COSINE-100 Liquid Scintillator Veto System

Authors: G. Adhikari, E. Barbosa de Souza, N. Carlin, J. J. Choi, S. Choi, M. Djamal, A. C. Ezeribe, L. E. Franca, C. Ha, I. S. Hahn, E. J. Jeon, J. H. Jo, W. G. Kang, M. Kauer, H. Kim, H. J. Kim, K. W. Kim, S. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, E. K. Lee, H. S. Lee, J. Lee, J. Y. Lee , et al. (21 additional authors not shown)

Abstract: This paper describes the liquid scintillator veto system for the COSINE-100 dark matter experiment and its performance. The COSINE-100 detector consists of eight NaI(Tl) crystals immersed in 2200~L of linear alkylbenzene-based liquid scintillator. The liquid scintillator tags between 65 and 75\% of the internal $^{40}$K background in the 2--6 keV energy region. We also describe the background mode… ▽ More This paper describes the liquid scintillator veto system for the COSINE-100 dark matter experiment and its performance. The COSINE-100 detector consists of eight NaI(Tl) crystals immersed in 2200~L of linear alkylbenzene-based liquid scintillator. The liquid scintillator tags between 65 and 75\% of the internal $^{40}$K background in the 2--6 keV energy region. We also describe the background model for the liquid scintillator, which is primarily used to assess its energy calibration and threshold. △ Less

Submitted 14 May, 2021; v1 submitted 5 April, 2020; originally announced April 2020.

Journal ref: Nucl. Instrum. Methods A 1006, 165431 (2021)

Comparison between DAMA/LIBRA and COSINE-100 in the light of Quenching Factors

Authors: Y. J. Ko, K. W. Kim, G. Adhikari, P. Adhikari, E. Barbosa de Souza, N. Carlin, J. J. Choi, S. Choi, M. Djamal, A. C. Ezeribe, C. Ha, I. S. Hahn, E. J. Jeon, J. H. Jo, W. G. Kang, M. Kauer, G. S. Kim, H. Kim, H. J. Kim, N. Y. Kim, S. K. Kim, Y. D. Kim, Y. H. Kim, E. K. Lee, H. S. Lee , et al. (24 additional authors not shown)

Abstract: There is a long standing debate about whether or not the annual modulation signal reported by the DAMA/LIBRA collaboration is induced by Weakly Interacting Massive Particles~(WIMP) in the galaxy's dark matter halo scattering from nuclides in their NaI(Tl) crystal target/detector. This is because regions of WIMP-mass vs. WIMP-nucleon cross-section parameter space that can accommodate the DAMA/LIBRA… ▽ More There is a long standing debate about whether or not the annual modulation signal reported by the DAMA/LIBRA collaboration is induced by Weakly Interacting Massive Particles~(WIMP) in the galaxy's dark matter halo scattering from nuclides in their NaI(Tl) crystal target/detector. This is because regions of WIMP-mass vs. WIMP-nucleon cross-section parameter space that can accommodate the DAMA/LIBRA-phase1 modulation signal in the context of the standard WIMP dark matter galactic halo and isospin-conserving~(canonical), spin-independent~(SI) WIMP-nucleon interactions have been excluded by many of other dark matter search experiments including COSINE-100, which uses the same NaI(Tl) target/detector material. Moreover, the recently released DAMA/LIBRA-phase2 results are inconsistent with an interpretation as WIMP-nuclide scattering via the canonical SI interaction and prefer, instead, isospin-violating or spin-dependent interactions. Dark matter interpretations of the DAMA/LIBRA signal are sensitive to the NaI(Tl) scintillation efficiency for nuclear recoils, which is characterized by so-called quenching factors~(QF), and the QF values used in previous studies differ significantly from recently reported measurements, which may have led to incorrect interpretations of the DAMA/LIBRA signal. In this article, the compatibility of the DAMA/LIBRA and COSINE-100 results, in light of the new QF measurements is examined for different possible types of WIMP-nucleon interactions. The resulting allowed parameter space regions associated with the DAMA/LIBRA signal are explicitly compared with 90\% confidence level upper limits from the initial 59.5~day COSINE-100 exposure. With the newly measured QF values, the allowed 3$σ$ regions from the DAMA/LIBRA data are still generally excluded by the COSINE-100 data. △ Less

Submitted 23 October, 2019; v1 submitted 10 July, 2019; originally announced July 2019.

Comments: Accepted in JCAP

Journal ref: JCAP 11 (2019) 008

Search for a Dark Matter-Induced Annual Modulation Signal in NaI(Tl) with the COSINE-100 Experiment

Authors: COSINE-100 Collaboration, :, G. Adhikari, P. Adhikari, E. Barbosa de Souza, N. Carlin, S. Choi, M. Djamal, A. C. Ezeribe, C. Ha, I. S. Hahn, E. J. Jeon, J. H. Jo, H. W. Joo, W. G. Kang, W. Kang, M. Kauer, G. S. Kim, H. Kim, H. J. Kim, K. W. Kim, N. Y. Kim, S. K. Kim, Y. D. Kim, Y. H. Kim , et al. (25 additional authors not shown)

Abstract: We present new constraints on the dark matter-induced annual modulation signal using 1.7 years, of COSINE-100 data with a total exposure of 97.7 kg$\cdot$years. The COSINE-100 experiment, consisting of 106 kg of NaI(Tl) target material, is designed to carry out a model-independent test of DAMA/LIBRA's claim of WIMP discovery by searching for the same annual modulation signal using the same NaI(Tl)… ▽ More We present new constraints on the dark matter-induced annual modulation signal using 1.7 years, of COSINE-100 data with a total exposure of 97.7 kg$\cdot$years. The COSINE-100 experiment, consisting of 106 kg of NaI(Tl) target material, is designed to carry out a model-independent test of DAMA/LIBRA's claim of WIMP discovery by searching for the same annual modulation signal using the same NaI(Tl) target. The crystal data show a 2.7 cpd/kg/keV background rate on average in the 2--6 keV energy region of interest. Using a $χ$-squared minimization method we observe best fit values for modulation amplitude and phase of 0.0092$\pm$0.0067 cpd/kg/keV and 127.2$\pm$45 d, respectively. △ Less

Submitted 25 July, 2019; v1 submitted 24 March, 2019; originally announced March 2019.

Comments: 6 pages, 5 figures, revised version as published in PRL

Journal ref: Phys. Rev. Lett. 123, 031302 (2019)

First Results from the AMoRE-Pilot neutrinoless double beta decay experiment

Authors: V. Alenkov, H. W. Bae, J. Beyer, R. S. Boiko, K. Boonin, O. Buzanov, N. Chanthima, M. K. Cheoun, D. M. Chernyak, J. S. Choe, S. Choi, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Yu. M. Gavriljuk, A. M. Gezhaev, V. D. Grigoryeva, V. I. Gurentsov, O. Gylova, C. Ha, D. H. Ha , et al. (84 additional authors not shown)

Abstract: The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-de… ▽ More The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-depleted calcium and $^{100}$Mo-enriched molybdenum ($^{48\textrm{depl}}$Ca$^{100}$MoO$_4$). The simultaneous detection of heat(phonon) and scintillation (photon) signals is realized with high resolution metallic magnetic calorimeter sensors that operate at milli-Kelvin temperatures. This stage of the project is carried out in the Yangyang underground laboratory at a depth of 700 m. We report first results from the AMoRE-Pilot $0νββ$ search with a 111 kg$\cdot$d live exposure of $^{48\textrm{depl}}$Ca$^{100}$MoO$_4$ crystals. No evidence for $0νββ$ decay of $^{100}$Mo is found, and a upper limit is set for the half-life of 0$νββ$ of $^{100}$Mo of $T^{0ν}_{1/2} > 9.5\times10^{22}$ y at 90% C.L.. This limit corresponds to an effective Majorana neutrino mass limit in the range $\langle m_{ββ}\rangle\le(1.2-2.1)$ eV. △ Less

Submitted 7 May, 2019; v1 submitted 22 March, 2019; originally announced March 2019.

A multi-material level set-based topology optimization of flexoelectric composites

Authors: Hamid Ghasemi, Harold S. Park, Timon Rabczuk

Abstract: We present a computational design methodology for topology optimization of multi-material-based flexoelectric composites. The methodology extends our recently proposed design methodology for a single flexoelectric material. We adopt the multi-phase vector level set (LS) model which easily copes with various numbers of phases, efficiently satisfies multiple constraints and intrinsically avoids over… ▽ More We present a computational design methodology for topology optimization of multi-material-based flexoelectric composites. The methodology extends our recently proposed design methodology for a single flexoelectric material. We adopt the multi-phase vector level set (LS) model which easily copes with various numbers of phases, efficiently satisfies multiple constraints and intrinsically avoids overlap or vacuum among different phases. We extend the point wise density mapping technique for multi-material design and use the B-spline elements to discretize the partial differential equations (PDEs) of flexoelectricity. The dependence of the objective function on the design variables is incorporated using the adjoint technique.The obtained design sensitivities are used in the Hamilton Jacobi equation to update the LS function. We provide numerical examples for two, three and four phase flexoelectric composites to demonstrate the flexibility of the model as well as the significant enhancement in electromechanical coupling coefficient that can be obtained using multi-material topology optimization for flexoelectric composites. △ Less

Submitted 30 January, 2019; originally announced January 2019.

Journal ref: Comput. Methods Appl. Mech. Engrg. 332: 47-62 (2018)

The First Direct Search for Inelastic Boosted Dark Matter with COSINE-100

Authors: C. Ha, G. Adhikari, P. Adhikari, E. Barbosa de Souza, N. Carlin, S. Choi, M. Djamal, A. C. Ezeribe, I. S. Hahn, E. J. Jeon, J. H. Jo, H. W. Joo, W. G. Kang, W. Kang, M. Kauer, G. S. Kim, H. Kim, H. J. Kim, K. W. Kim, N. Y. Kim, S. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, V. A. Kudryavtsev , et al. (23 additional authors not shown)

Abstract: A search for inelastic boosted dark matter (iBDM) using the COSINE-100 detector with 59.5 days of data is presented. This relativistic dark matter is theorized to interact with the target material through inelastic scattering with electrons, creating a heavier state that subsequently produces standard model particles, such as an electron-positron pair. In this study, we search for this electron-po… ▽ More A search for inelastic boosted dark matter (iBDM) using the COSINE-100 detector with 59.5 days of data is presented. This relativistic dark matter is theorized to interact with the target material through inelastic scattering with electrons, creating a heavier state that subsequently produces standard model particles, such as an electron-positron pair. In this study, we search for this electron-positron pair in coincidence with the initially scattered electron as a signature for an iBDM interaction. No excess over the predicted background event rate is observed. Therefore, we present limits on iBDM interactions under various hypotheses, one of which allows us to explore an area of the experimental search for iBDM using a terrestrial detector. △ Less

Submitted 30 January, 2019; v1 submitted 22 November, 2018; originally announced November 2018.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. Lett. 122, 131802 (2019)

Quenching factor measurement for NaI(Tl) scintillation crystal

Authors: H. W. Joo, H. S. Park, J. H. Kim, S. K. Kim, Y. D. Kim, H. S. Lee, S. H. Kim

Abstract: Scintillation crystals are commonly used for direct detection of weakly interacting massive particles (WIMPs), which are suitable candidates for a particle dark matter. It is well known that the scintillation light yields are different for electron recoil and nuclear recoil. To calibrate the energies of WIMP-induced nuclear recoil signals, the quenching factor (QF) needs to be measured, which is t… ▽ More Scintillation crystals are commonly used for direct detection of weakly interacting massive particles (WIMPs), which are suitable candidates for a particle dark matter. It is well known that the scintillation light yields are different for electron recoil and nuclear recoil. To calibrate the energies of WIMP-induced nuclear recoil signals, the quenching factor (QF) needs to be measured, which is the light yield ratio of the nuclear recoil to electron recoil. Measurements of the QFs for Na and I recoils in a small (2 cm x 2 cm x 1.5 cm) NaI(Tl) crystal are performed with 2.43-MeV mono-energetic neutrons generated by deuteron-deuteron fusion. Depending on the scattering angle of the neutrons, the energies of the recoiled ions vary in the range of 9 - 152 keV for Na and 19 - 75 keV for I. The QFs of Na are measured at 9 points with values in the range of 10 - 23 % while those of I are measured at 4 points with values in the range of 4 - 6 %. △ Less

Submitted 1 January, 2019; v1 submitted 26 September, 2018; originally announced September 2018.

Comments: 18 pages, 10 figures. Quenching factor measured with COSINE crystal

Accelerated search and design of stretchable graphene kirigami using machine learning

Authors: Paul Z. Hanakata, Ekin D. Cubuk, David K. Campbell, Harold S. Park

Abstract: Making kirigami-inspired cuts into a sheet has been shown to be an effective way of designing stretchable materials with metamorphic properties where the 2D shape can transform into complex 3D shapes. However, finding the optimal solutions is not straightforward as the number of possible cutting patterns grows exponentially with system size. Here, we report on how machine learning (ML) can be used… ▽ More Making kirigami-inspired cuts into a sheet has been shown to be an effective way of designing stretchable materials with metamorphic properties where the 2D shape can transform into complex 3D shapes. However, finding the optimal solutions is not straightforward as the number of possible cutting patterns grows exponentially with system size. Here, we report on how machine learning (ML) can be used to approximate the target properties, such as yield stress and yield strain, as a function of cutting pattern. Our approach enables the rapid discovery of kirigami designs that yield extreme stretchability as verified by molecular dynamics (MD) simulations. We find that convolutional neural networks (CNN), commonly used for classification in vision tasks, can be applied for regression to achieve an accuracy close to the precision of the MD simulations. This approach can then be used to search for optimal designs that maximize elastic stretchability with only 1000 training samples in a large design space of $\sim 4\times10^6$ candidate designs. This example demonstrates the power and potential of ML in finding optimal kirigami designs at a fraction of iterations that would be required of a purely MD or experiment-based approach, where no prior knowledge of the governing physics is known or available. △ Less

Submitted 18 August, 2018; originally announced August 2018.

Journal ref: Phys. Rev. Lett. 121, 255304 (2018)

The COSINE-100 Data Acquisition System

Authors: COSINE-100 Collaboration, :, G. Adhikari, P. Adhikari, E. Barbosa de Souza, N. Carlin, S. Choi, W. Choi, M. Djamal, A. C. Ezeribe, C. Ha, I. S. Hahn, A. J. F. Hubbard, E. J. Jeon, J. H. Jo, H. W. Joo, W. G. Kang, W. S. Kang, M. Kauer, H. Kim, H. J. Kim, K. W. Kim, M. C. Kim, N. Y. Kim, S. K. Kim , et al. (23 additional authors not shown)

Abstract: COSINE-100 is a dark matter direct detection experiment designed to test the annual modulation signal observed by the DAMA/LIBRA experiment. COSINE-100 consists of 8 NaI(Tl) crystals with a total mass of 106 kg, a 2200 L liquid scintillator veto, and 37 muon detector panels. We present details of the data acquisition system of COSINE-100, including waveform storage using flash analog-to-digital co… ▽ More COSINE-100 is a dark matter direct detection experiment designed to test the annual modulation signal observed by the DAMA/LIBRA experiment. COSINE-100 consists of 8 NaI(Tl) crystals with a total mass of 106 kg, a 2200 L liquid scintillator veto, and 37 muon detector panels. We present details of the data acquisition system of COSINE-100, including waveform storage using flash analog-to-digital converters for crystal events and integrated charge storage using charge-sensitive analog-to-digital converters for liquid scintillator and plastic scintillator muon veto events. We also discuss several trigger conditions developed in order to distinguish signal events from photomultiplier noise events. The total trigger rate observed for the crystal/liquid scintillator (plastic scintillator) detector is 15 Hz (24 Hz). △ Less

Submitted 26 June, 2018; originally announced June 2018.

Journal ref: JINST 13 P09006 (2018)

Limits on Interactions between Weakly Interacting Massive Particles and Nucleons Obtained with NaI(Tl) crystal Detectors

Authors: K. W. Kim, G. Adhikari, P. Adhikari, S. Choi, C. Ha, I. S. Hahn, E. J. Jeon, H. W. Joo, W. G. Kang, H. J. Kim, N. Y. Kim, S. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, H. S. Lee, J. S. Lee, J. Y. Lee, M. H. Lee, D. S. Leonard, S. L. Olsen, B. J. Park, H. K. Park, H. S. Park, K. S. Park

Abstract: Limits on the cross section for weakly interacting massive particles (WIMPs) scattering off nucleons in the NaI(Tl) detectors at the Yangyang Underground Laboratory are obtained with a 2967.4 kg*day data exposure. Nuclei recoiling are identified by the pulse shape of scintillating photon signals. Data are consistent with no nuclear recoil hypothesis, and 90% confidence level upper limits are set.… ▽ More Limits on the cross section for weakly interacting massive particles (WIMPs) scattering off nucleons in the NaI(Tl) detectors at the Yangyang Underground Laboratory are obtained with a 2967.4 kg*day data exposure. Nuclei recoiling are identified by the pulse shape of scintillating photon signals. Data are consistent with no nuclear recoil hypothesis, and 90% confidence level upper limits are set. These limits partially exclude the DAMA/LIBRA region of WIMP-sodium interaction with the same NaI(Tl) target detector. This 90% confidence level upper limit on WIMP-nucleon spin-independent cross section is 3.26*10^-4 pb for a WIMP mass at 10 GeV/c^2. △ Less

Submitted 21 January, 2019; v1 submitted 18 June, 2018; originally announced June 2018.

Background model for the NaI(Tl) crystals in COSINE-100

Authors: P. Adhikari, G. Adhikari, E. Barbosa de Souza, N. Carlin, S. Choi, W. Q. Choi, M. Djamal, A. C. Ezeribe, C. Ha, I. S. Hahn, A. J. F. Hubbard, E. J. Jeon, J. H. Jo, H. W. Joo, W. G. Kang, M. Kauer, W. S. Kang, B. H. Kim, H. Kim, H. J. Kim, K. W. Kim, M. C. Kim, N. Y. Kim, S. K. Kim, Y. D. Kim , et al. (24 additional authors not shown)

Abstract: The COSINE-100 dark matter search experiment is an array of NaI(Tl) crystal detectors located in the Yangyang Underground Laboratory (Y2L). To understand measured backgrounds in the NaI(Tl) crystals we have performed Monte Carlo simulations using the Geant4 toolkit and developed background models for each crystal that consider contributions from both internal and external sources, including cosmog… ▽ More The COSINE-100 dark matter search experiment is an array of NaI(Tl) crystal detectors located in the Yangyang Underground Laboratory (Y2L). To understand measured backgrounds in the NaI(Tl) crystals we have performed Monte Carlo simulations using the Geant4 toolkit and developed background models for each crystal that consider contributions from both internal and external sources, including cosmogenic nuclides. The background models are based on comparisons of measurement data with Monte Carlo simulations that are guided by a campaign of material assays and are used to evaluate backgrounds and identify their sources. The average background level for the six crystals (70 kg total mass) that are studied is 3.5 counts/day/keV/kg in the (2-6) keV energy interval. The dominant contributors in this energy region are found to be $^{210}$Pb and $^3$H. △ Less

Submitted 11 June, 2018; v1 submitted 14 April, 2018; originally announced April 2018.

A Staggered Explicit-Implicit Finite Element Formulation for Electroactive Polymers

Authors: Saman Seifi, K. C. Park, Harold S. Park

Abstract: Electroactive polymers such as dielectric elastomers (DEs) have attracted significant attention in recent years. Computational techniques to solve the coupled electromechanical system of equations for this class of materials have universally centered around fully coupled monolithic formulations, which while generating good accuracy requires significant computational expense. However, this has sign… ▽ More Electroactive polymers such as dielectric elastomers (DEs) have attracted significant attention in recent years. Computational techniques to solve the coupled electromechanical system of equations for this class of materials have universally centered around fully coupled monolithic formulations, which while generating good accuracy requires significant computational expense. However, this has significantly hindered the ability to solve large scale, fully three-dimensional problems involving complex deformations and electromechanical instabilities of DEs. In this work, we provide theoretical basis for the effectiveness and accuracy of staggered explicit-implicit finite element formulations for this class of electromechanically coupled materials, and elicit the simplicity of the resulting staggered formulation. We demonstrate the stability and accuracy of the staggered approach by solving complex electromechanically coupled problems involving electroactive polymers, where we focus on problems involving electromechanical instabilities such as creasing, wrinkling, and bursting drops. In all examples, essentially identical results to the fully monolithic solution are obtained, showing the accuracy of the staggered approach at a significantly reduced computational cost. △ Less

Submitted 21 March, 2018; originally announced March 2018.

Muon detector for the COSINE-100 experiment

Authors: COSINE-100 Collaboration, :, H. Prihtiadi, G. Adhikari, P. Adhikari, E. Barbosa de Souza, N. Carlin, S. Choi, W. Q. Choi, M. Djamal, A. C. Ezeribe, C. Ha, I. S. Hahn, A. J. F. Hubbard, E. J. Jeon, J. H. Jo, H. W. Joo, W. Kang, W. G. Kang, M. Kauer, B. H. Kim, H. Kim, H. J. Kim, K. W. Kim, N. Y. Kim , et al. (28 additional authors not shown)

Abstract: The COSINE-100 dark matter search experiment has started taking physics data with the goal of performing an independent measurement of the annual modulation signal observed by DAMA/LIBRA. A muon detector was constructed by using plastic scintillator panels in the outermost layer of the shield surrounding the COSINE-100 detector. It is used to detect cosmic ray muons in order to understand the impa… ▽ More The COSINE-100 dark matter search experiment has started taking physics data with the goal of performing an independent measurement of the annual modulation signal observed by DAMA/LIBRA. A muon detector was constructed by using plastic scintillator panels in the outermost layer of the shield surrounding the COSINE-100 detector. It is used to detect cosmic ray muons in order to understand the impact of the muon annual modulation on dark matter analysis. Assembly and initial performance test of each module have been performed at a ground laboratory. The installation of the detector in Yangyang Underground Laboratory (Y2L) was completed in the summer of 2016. Using three months of data, the muon underground flux was measured to be 328 $\pm$ 1(stat.)$\pm$ 10(syst.) muons/m$^2$/day. In this report, the assembly of the muon detector and the results from the analysis are presented. △ Less

Submitted 5 December, 2017; originally announced December 2017.

Comments: 11 pages, 19 figures

Initial Performance of the COSINE-100 Experiment

Authors: G. Adhikari, P. Adhikari, E. Barbosa de Souza, N. Carlin, S. Choi, W. Q. Choi, M. Djamal, A. C. Ezeribe, C. Ha, I. S. Hahn, A. J. F. Hubbard, E. J. Jeon, J. H. Jo, H. W. Joo, W. Kang, W. G. Kang, M. Kauer, B. H. Kim, H. Kim, H. J. Kim, K. W. Kim, M. C. Kim, N. Y. Kim, S. K. Kim, Y. D. Kim , et al. (27 additional authors not shown)

Abstract: COSINE is a dark matter search experiment based on an array of low background NaI(Tl) crystals located at the Yangyang underground laboratory. The assembly of COSINE-100 was completed in the summer of 2016 and the detector is currently collecting physics quality data aimed at reproducing the DAMA/LIBRA experiment that reported an annual modulation signal. Stable operation has been achieved and wil… ▽ More COSINE is a dark matter search experiment based on an array of low background NaI(Tl) crystals located at the Yangyang underground laboratory. The assembly of COSINE-100 was completed in the summer of 2016 and the detector is currently collecting physics quality data aimed at reproducing the DAMA/LIBRA experiment that reported an annual modulation signal. Stable operation has been achieved and will continue for at least two years. Here, we describe the design of COSINE-100, including the shielding arrangement, the configuration of the NaI(Tl) crystal detection elements, the veto systems, and the associated operational systems, and we show the current performance of the experiment. △ Less

Submitted 11 February, 2018; v1 submitted 15 October, 2017; originally announced October 2017.

Comments: 19 pages, 25 figures, EPJC accepted

CT sinogram-consistency learning for metal-induced beam hardening correction

Authors: Hyung Suk Park, Sung Min Lee, Hwa Pyung Kim, Jin Keun Seo

Abstract: This paper proposes a sinogram consistency learning method to deal with beam-hardening related artifacts in polychromatic computerized tomography (CT). The presence of highly attenuating materials in the scan field causes an inconsistent sinogram, that does not match the range space of the Radon transform. When the mismatched data are entered into the range space during CT reconstruction, streakin… ▽ More This paper proposes a sinogram consistency learning method to deal with beam-hardening related artifacts in polychromatic computerized tomography (CT). The presence of highly attenuating materials in the scan field causes an inconsistent sinogram, that does not match the range space of the Radon transform. When the mismatched data are entered into the range space during CT reconstruction, streaking and shading artifacts are generated owing to the inherent nature of the inverse Radon transform. The proposed learning method aims to repair inconsistent sinograms by removing the primary metal-induced beam-hardening factors along the metal trace in the sinogram. Taking account of the fundamental difficulty in obtaining sufficient training data in a medical environment, the learning method is designed to use simulated training data and a patient-type specific learning model is used to simplify the learning process. The feasibility of the proposed method is investigated using a dataset, consisting of real CT scan of pelvises containing hip prostheses. The anatomical areas in training and test data are different, in order to demonstrate that the proposed method extracts the beam hardening features, selectively. The results show that our method successfully corrects sinogram inconsistency by extracting beam-hardening sources by means of deep learning. This paper proposed a deep learning method of sinogram correction for beam hardening reduction in CT for the first time. Conventional methods for beam hardening reduction are based on regularizations, and have the fundamental drawback of being not easily able to use manifold CT images, while a deep learning approach has the potential to do so. △ Less

Submitted 12 January, 2018; v1 submitted 2 August, 2017; originally announced August 2017.

Comments: 17 pages, 8 figures

Machine-learning-based nonlinear decomposition of CT images for metal artifact reduction

Authors: Hyung Suk Park, Sung Min Lee, Hwa Pyung Kim, Jin Keun Seo

Abstract: Computed tomography (CT) images containing metallic objects commonly show severe streaking and shadow artifacts. Metal artifacts are caused by nonlinear beam-hardening effects combined with other factors such as scatter and Poisson noise. In this paper, we propose an implant-specific method that extracts beam-hardening artifacts from CT images without affecting the background image. We found that… ▽ More Computed tomography (CT) images containing metallic objects commonly show severe streaking and shadow artifacts. Metal artifacts are caused by nonlinear beam-hardening effects combined with other factors such as scatter and Poisson noise. In this paper, we propose an implant-specific method that extracts beam-hardening artifacts from CT images without affecting the background image. We found that in cases where metal is inserted in the water (or tissue), the generated beam-hardening artifacts can be approximately extracted by subtracting artifacts generated exclusively by metals. We used a deep learning technique to train nonlinear representations of beam-hardening artifacts arising from metals, which appear as shadows and streaking artifacts. The proposed network is not designed to identify ground-truth CT images (i.e., the CT image before its corruption by metal artifacts). Consequently, these images are not required for training. The proposed method was tested on a dataset consisting of real CT scans of pelvises containing simulated hip prostheses. The results demonstrate that the proposed deep learning method successfully extracts both shadowing and streaking artifacts. △ Less

Submitted 1 August, 2017; originally announced August 2017.

Tensile fracture behavior of short carbon nanotube reinforced polymer composites: A coarse-grained model

Authors: Behrouz Arash, Harold S. Park, Timon Rabczuk

Abstract: Short-fiber-reinforced polymer composites are increasingly used in engineering applications and industrial products owing to their unique combination of superior mechanical properties, and relatively easy and low cost manufacturing process. The mechanical behavior of short carbon nanotube (CNT) polymer composites, however, remains poorly understood due to size and time limitations of experiments a… ▽ More Short-fiber-reinforced polymer composites are increasingly used in engineering applications and industrial products owing to their unique combination of superior mechanical properties, and relatively easy and low cost manufacturing process. The mechanical behavior of short carbon nanotube (CNT) polymer composites, however, remains poorly understood due to size and time limitations of experiments and atomistic simulations. To address this issue, the tensile fracture behavior of short CNT reinforced poly (methyl methacrylate) (PMMA) matrix composites is investigated using a coarse-grained (CG) model. The reliability of the CG model is demonstrated by reproducing experimental results on the stress-stain behavior of the polymer material. The effect of the nanotube weight fraction on the mechanical properties, i.e. the Young's modulus, yield strength,tensile strength and critical strain, of the CNT/polymer composites is studied in detail. The dependence of the mechanical properties of the composites on the orientation and length-to-diameter aspect ratio of nanotube reinforcements is also examined. △ Less

Submitted 11 April, 2017; originally announced April 2017.

Comments: arXiv admin note: text overlap with arXiv:1704.01451

Mechanical properties of carbon nanotube reinforced polymer nanocomposites: A coarse-grained model

Authors: Behrouz Arash, Harold S. Park, Timon Rabczuk

Abstract: In this work, a coarse-grained (CG) model of carbon nanotube (CNT) reinforced polymer matrix composites is developed. A distinguishing feature of the CG model is the ability to capture interactions between polymer chains and nanotubes. The CG potentials for nanotubes and polymer chains are calibrated using the strain energy conservation between CG models and full atomistic systems. The applicabili… ▽ More In this work, a coarse-grained (CG) model of carbon nanotube (CNT) reinforced polymer matrix composites is developed. A distinguishing feature of the CG model is the ability to capture interactions between polymer chains and nanotubes. The CG potentials for nanotubes and polymer chains are calibrated using the strain energy conservation between CG models and full atomistic systems. The applicability and efficiency of the CG model in predicting the elastic properties of CNT/polymer composites are evaluated through verification processes with molecular simulations. The simulation results reveal that the CG model is able to estimate the mechanical properties of the nanocomposites with high accuracy and low computational cost. The effect of the volume fraction of CNT reinforcements on the Young's modulus of the nanocomposites is investigated. The application of the method in the modeling of large unit cells with randomly distributed CNT reinforcements is examined. The established CG model will enable the simulation of reinforced polymer matrix composites across a wide range of length scales from nano to mesoscale. △ Less

Submitted 11 April, 2017; originally announced April 2017.

Journal ref: Composite Part B, 2015

Coarse-grained model of the J-integral of carbon nanotube reinforced polymer composites

Authors: Behrouz Arash, Harold S. Park, Timon Rabczuk

Abstract: The J-integral is recognized as a fundamental parameter in fracture mechanics that characterizes the inherent resistance of materials to crack growth. However, the conventional methods to calculate the J-integral, which require knowledge of the exact position of a crack tip and the continuum fields around it, are unable to precisely measure the J-integral of polymer composites at the nanoscale. Th… ▽ More The J-integral is recognized as a fundamental parameter in fracture mechanics that characterizes the inherent resistance of materials to crack growth. However, the conventional methods to calculate the J-integral, which require knowledge of the exact position of a crack tip and the continuum fields around it, are unable to precisely measure the J-integral of polymer composites at the nanoscale. This work aims to propose an effective calculation method based on coarse-grained (CG) simulations for predicting the J-integral of carbon nanotube (CNT)/polymer composites. In the proposed approach, the J-integral is determined from the load displacement curve of a single specimen. The distinguishing feature of the method is the calculation of J-integral without need of information about the crack tip, which makes it applicable to complex polymer systems. The effects of the CNT weight fraction and covalent cross-links between the polymer matrix and nanotubes, and polymer chains on the fracture behavior of the composites are studied in detail. The dependence of the J-integral on the crack length and the size of representative volume element (RVE) is also explored. △ Less

Submitted 6 April, 2017; originally announced April 2017.

Comments: arXiv admin note: text overlap with arXiv:1704.01451

Physics Potentials with the Second Hyper-Kamiokande Detector in Korea

Authors: Hyper-Kamiokande proto-collaboration, :, K. Abe, Ke. Abe, S. H. Ahn, H. Aihara, A. Aimi, R. Akutsu, C. Andreopoulos, I. Anghel, L. H. V. Anthony, M. Antonova, Y. Ashida, V. Aushev, M. Barbi, G. J. Barker, G. Barr, P. Beltrame, V. Berardi, M. Bergevin, S. Berkman, L. Berns, T. Berry, S. Bhadra, D. Bravo-Bergu no , et al. (331 additional authors not shown)

Abstract: Hyper-Kamiokande consists of two identical water-Cherenkov detectors of total 520~kt with the first one in Japan at 295~km from the J-PARC neutrino beam with 2.5$^{\textrm{o}}$ Off-Axis Angles (OAAs), and the second one possibly in Korea in a later stage. Having the second detector in Korea would benefit almost all areas of neutrino oscillation physics mainly due to longer baselines. There are sev… ▽ More Hyper-Kamiokande consists of two identical water-Cherenkov detectors of total 520~kt with the first one in Japan at 295~km from the J-PARC neutrino beam with 2.5$^{\textrm{o}}$ Off-Axis Angles (OAAs), and the second one possibly in Korea in a later stage. Having the second detector in Korea would benefit almost all areas of neutrino oscillation physics mainly due to longer baselines. There are several candidate sites in Korea with baselines of 1,000$\sim$1,300~km and OAAs of 1$^{\textrm{o}}$$\sim$3$^{\textrm{o}}$. We conducted sensitivity studies on neutrino oscillation physics for a second detector, either in Japan (JD $\times$ 2) or Korea (JD + KD) and compared the results with a single detector in Japan. Leptonic CP violation sensitivity is improved especially when the CP is non-maximally violated. The larger matter effect at Korean candidate sites significantly enhances sensitivities to non-standard interactions of neutrinos and mass ordering determination. Current studies indicate the best sensitivity is obtained at Mt. Bisul (1,088~km baseline, $1.3^\circ$ OAA). Thanks to a larger (1,000~m) overburden than the first detector site, clear improvements to sensitivities for solar and supernova relic neutrino searches are expected. △ Less

Submitted 26 March, 2018; v1 submitted 18 November, 2016; originally announced November 2016.

Comments: 102 pages, 49 figures. Accepted by PTEP

Journal ref: Prog Theor Exp Phys (2018)

Sterile neutrino search at NEOS Experiment

Authors: Y. J. Ko, B. R. Kim, J. Y. Kim, B. Y. Han, C. H. Jang, E. J. Jeon, K. K. Joo, H. J. Kim, H. S. Kim, Y. D. Kim, Jaison Lee, J. Y. Lee, M. H. Lee, Y. M. Oh, H. K. Park, H. S. Park, K. S. Park, K. M. Seo, Kim Siyeon, G. M. Sun

Abstract: An experiment to search for light sterile neutrinos was conducted at a reactor with a thermal power of 2.8 GW located at the Hanbit nuclear power complex. The search was done with a detector consisting of a ton of Gd-loaded liquid scintillator in a tendon gallery approximately 24 m from the reactor core. The measured antineutrino event rate is 1976 per day with a signal to background ratio of abou… ▽ More An experiment to search for light sterile neutrinos was conducted at a reactor with a thermal power of 2.8 GW located at the Hanbit nuclear power complex. The search was done with a detector consisting of a ton of Gd-loaded liquid scintillator in a tendon gallery approximately 24 m from the reactor core. The measured antineutrino event rate is 1976 per day with a signal to background ratio of about 22. The shape of the antineutrino energy spectrum obtained from eight-month data-taking period is compared with a hypothesis of oscillations due to active-sterile antineutrino mixing. It is found to be consistent with no oscillation. An excess around 5 MeV prompt energy range is observed as seen in existing longer baseline experiments. The parameter space of $\sin^{2}2θ_{14}$ down below 0.1 for $Δm^{2}_{41}$ ranging from 0.2 eV$^{2}$ to 2.3 eV$^{2}$ and the optimum point for the previously reported reactor antineutrino anomaly are excluded with a confidence level higher than 90%. △ Less

Submitted 21 March, 2017; v1 submitted 17 October, 2016; originally announced October 2016.

Comments: 6 pages, 4 figures. 1 supplemental material (Fig. S1). Version published in Physical Review Letters

Journal ref: Phys. Rev. Lett. 118, 121802 (2017)

Measurement of Fast Neutron Rate for NEOS Experiment

Authors: Y. J. Ko, J. Y. Kim, B. Y. Han, C. H. Jang, E. J. Jeon, K. K. Joo, B. R. Kim, H. J. Kim, H. S. Kim, Y. D. Kim, Jaison Lee, J. Y. Lee, M. H. Lee, Y. M. Oh, H. K. Park, H. S. Park, K. S. Park, K. M. Seo, Kim Siyeon, G. M. Sun

Abstract: The fast neutron rate is measured at the site of NEOS experiment, a short baseline neutrino experiment located in a tendon gallery of a commercial nuclear power plant, using a 0.78-liter liquid scintillator detector. A pulse shape discrimination technique is used to identify neutron signals. The measurements are performed during the nuclear reactor-on and off periods and found to be ~20 per day fo… ▽ More The fast neutron rate is measured at the site of NEOS experiment, a short baseline neutrino experiment located in a tendon gallery of a commercial nuclear power plant, using a 0.78-liter liquid scintillator detector. A pulse shape discrimination technique is used to identify neutron signals. The measurements are performed during the nuclear reactor-on and off periods and found to be ~20 per day for both periods. The fast neutron rate is also measured at an overground site with a negligible overburden and is found to be ~100 times higher than that at the NEOS experiment site. △ Less

Submitted 17 October, 2016; originally announced October 2016.

Comments: To be submitted to JKPS

Technical Design Report for the AMoRE $0νββ$ Decay Search Experiment

Authors: V. Alenkov, P. Aryal, J. Beyer, R. S. Boiko, K. Boonin, O. Buzanov, N. Chanthima, M. K. Cheoun D. M. Chernyak, J. Choi, S. Choi, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Yu. M. Gavriljuk, A. M. Gezhaev, V. I. Gurentsov, D. H Ha, I. S. Hahn, J. H. Jang, E. J. Jeon, H. S. Jo , et al. (65 additional authors not shown)

Abstract: The AMoRE (Advanced Mo-based Rare process Experiment) project is a series of experiments that use advanced cryogenic techniques to search for the neutrinoless double-beta decay of \mohundred. The work is being carried out by an international collaboration of researchers from eight countries. These searches involve high precision measurements of radiation-induced temperature changes and scintillati… ▽ More The AMoRE (Advanced Mo-based Rare process Experiment) project is a series of experiments that use advanced cryogenic techniques to search for the neutrinoless double-beta decay of \mohundred. The work is being carried out by an international collaboration of researchers from eight countries. These searches involve high precision measurements of radiation-induced temperature changes and scintillation light produced in ultra-pure \Mo[100]-enriched and \Ca[48]-depleted calcium molybdate ($\mathrm{^{48depl}Ca^{100}MoO_4}$) crystals that are located in a deep underground laboratory in Korea. The \mohundred nuclide was chosen for this \zeronubb decay search because of its high $Q$-value and favorable nuclear matrix element. Tests have demonstrated that \camo crystals produce the brightest scintillation light among all of the molybdate crystals, both at room and at cryogenic temperatures. $\mathrm{^{48depl}Ca^{100}MoO_4}$ crystals are being operated at milli-Kelvin temperatures and read out via specially developed metallic-magnetic-calorimeter (MMC) temperature sensors that have excellent energy resolution and relatively fast response times. The excellent energy resolution provides good discrimination of signal from backgrounds, and the fast response time is important for minimizing the irreducible background caused by random coincidence of two-neutrino double-beta decay events of \mohundred nuclei. Comparisons of the scintillating-light and phonon yields and pulse shape discrimination of the phonon signals will be used to provide redundant rejection of alpha-ray-induced backgrounds. An effective Majorana neutrino mass sensitivity that reaches the expected range of the inverted neutrino mass hierarchy, i.e., 20-50 meV, could be achieved with a 200~kg array of $\mathrm{^{48depl}Ca^{100}MoO_4}$ crystals operating for three years. △ Less

Submitted 18 December, 2015; originally announced December 2015.

Comments: 93 pages

Highly Stretchable MoS$_2$ Kirigami

Authors: Paul Z. Hanakata, Zenan Qi, David K. Campbell, Harold S. Park

Abstract: We report the results of classical molecular dynamics simulations focused on studying the mechanical properties of MoS$_{2}$ kirigami. Several different kirigami structures were studied based upon two simple non-dimensional parameters, which are related to the density of cuts, as well as the ratio of the overlapping cut length to the nanoribbon length. Our key finding is significant enhancements i… ▽ More We report the results of classical molecular dynamics simulations focused on studying the mechanical properties of MoS$_{2}$ kirigami. Several different kirigami structures were studied based upon two simple non-dimensional parameters, which are related to the density of cuts, as well as the ratio of the overlapping cut length to the nanoribbon length. Our key finding is significant enhancements in tensile yield (by a factor of four) and fracture strains (by a factor of six) as compared to pristine MoS$_{2}$ nanoribbons. These results in conjunction with recent results on graphene suggest that the kirigami approach may be a generally useful one for enhancing the ductility of two-dimensional nanomaterials. △ Less

Submitted 17 December, 2015; v1 submitted 9 November, 2015; originally announced November 2015.

Journal ref: Nanoscale, 2016, 8, 458-463

Understanding internal backgrounds of NaI(Tl) crystals toward a 200~kg array for the KIMS-NaI experiment

Authors: P. Adhikari, G. Adhikari, S. Choi, C. Ha, I. S. Hahn, E. J. Jeon, H. W. Joo, W. G. Kang, H. J. Kim, H. O. Kim, K. W. Kim, N. Y. Kim, S. K. Kim, Y. D. Kim, Y. H. Kim, H. S. Lee, J. H. Lee, M. H. Lee, D. S. Leonard, J. Li, S. Y. Oh, S. L. Olsen, H. K. Park, H. S. Park, K. S. Park , et al. (2 additional authors not shown)

Abstract: The Korea Invisible Mass Search (KIMS) collaboration has developed low-background NaI(Tl) crystals that are suitable for the direct detection of WIMP dark matter. With experience built on the KIMS-CsI programs, the KIMS-NaI experiment will consist of a 200~kg NaI(Tl) crystal array surrounded by layers of shielding structures and will be operated at the Yangyang underground laboratory. The goal is… ▽ More The Korea Invisible Mass Search (KIMS) collaboration has developed low-background NaI(Tl) crystals that are suitable for the direct detection of WIMP dark matter. With experience built on the KIMS-CsI programs, the KIMS-NaI experiment will consist of a 200~kg NaI(Tl) crystal array surrounded by layers of shielding structures and will be operated at the Yangyang underground laboratory. The goal is to provide an unambiguous test of the DAMA/LIBRA's annual modulation signature. Measurements of six prototype crystals show progress in the reduction of internal contaminations of radioisotopes. Based on our understanding of these measurements, we expect to achieve a background level in the final detector configuration that is less than 1~count/day/keV/kg for recoil energies around 2~keV. The annual modulation sensitivity for the KIMS-NaI experiment shows that an unambiguous 7$σ$ test of the DAMA/LIBRA signature would be possible with a 600~kg$\cdot$year exposure with this system. △ Less

Submitted 17 March, 2016; v1 submitted 15 October, 2015; originally announced October 2015.

Comments: 9 pages, 7 figures, EPJC

Pulse-shape discrimination between electron and nuclear recoils in a NaI(Tl) crystal

Authors: H. S. Lee, G. Adhikari, P. Adhikari, S. Choi, I. S. Hahn, E. J. Jeon, H. W. Joo, W. G. Kang, G. B. Kim, H. J. Kim, H. O. Kim, K. W. Kim, N. Y. Kim, S. K. Kim, Y. D. Kim, Y. H. Kim, J. H. Lee, M. H. Lee, D. S. Leonard, J. Li, S. Y. Oh, S. L. Olsen, H. K. Park, H. S. Park, K. S. Park , et al. (2 additional authors not shown)

Abstract: We report on the response of a high light-output NaI(Tl) crystal to nuclear recoils induced by neutrons from an Am-Be source and compare the results with the response to electron recoils produced by Compton scattered 662 keV $γ$-rays from a $^{137}$Cs source. The measured pulse-shape discrimination (PSD) power of the NaI(Tl) crystal is found to be significantly improved because of the high light o… ▽ More We report on the response of a high light-output NaI(Tl) crystal to nuclear recoils induced by neutrons from an Am-Be source and compare the results with the response to electron recoils produced by Compton scattered 662 keV $γ$-rays from a $^{137}$Cs source. The measured pulse-shape discrimination (PSD) power of the NaI(Tl) crystal is found to be significantly improved because of the high light output of the NaI(Tl) detector. We quantify the PSD power with a quality factor and estimate the sensitivity to the interaction rate for weakly interacting massive particles (WIMPs) with nucleons, and the result is compared with the annual modulation amplitude observed by the DAMA/LIBRA experiment. The sensitivity to spin-independent WIMP-nucleon interactions based on 100 kg$\cdot$year of data from NaI detectors is estimated with simulated experiments, using the standard halo model. △ Less

Submitted 25 August, 2015; v1 submitted 17 March, 2015; originally announced March 2015.

Comments: 11pages

Journal ref: JHEP 08 (2015) 093

Development of an Interpretive Simulation Tool for the Proton Radiography Technique

Authors: M. C. Levy, D. D. Ryutov, S. C. Wilks, J. S. Ross, C. M. Huntington, F. Fiuza, D. A. Martinez, N. L. Kugland, M. G. Baring, H-. S. Park

Abstract: Proton radiography is a useful diagnostic of high energy density (HED) plasmas under active theoretical and experimental development. In this paper we describe a new simulation tool that interacts realistic laser-driven point-like proton sources with three dimensional electromagnetic fields of arbitrary strength and structure and synthesizes the associated high resolution proton radiograph. The pr… ▽ More Proton radiography is a useful diagnostic of high energy density (HED) plasmas under active theoretical and experimental development. In this paper we describe a new simulation tool that interacts realistic laser-driven point-like proton sources with three dimensional electromagnetic fields of arbitrary strength and structure and synthesizes the associated high resolution proton radiograph. The present tool's numerical approach captures all relevant physics effects, including effects related to the formation of caustics. Electromagnetic fields can be imported from PIC or hydrodynamic codes in a streamlined fashion, and a library of electromagnetic field `primitives' is also provided. This latter capability allows users to add a primitive, modify the field strength, rotate a primitive, and so on, while quickly generating a high resolution radiograph at each step. In this way, our tool enables the user to deconstruct features in a radiograph and interpret them in connection to specific underlying electromagnetic field elements. We show an example application of the tool in connection to experimental observations of the Weibel instability in counterstreaming plasmas, using $\sim 10^8$ particles generated from a realistic laser-driven point-like proton source, imaging fields which cover volumes of $\sim10 $ mm$^3$. Insights derived from this application show that the tool can support understanding of HED plasmas. △ Less

Submitted 16 April, 2015; v1 submitted 8 October, 2014; originally announced October 2014.

Comments: Figures and tables related to the Appendix are included in the published journal article

Low-dimensional optical chirality in complex potentials

Authors: Sunkyu Yu, Hyun Sung Park, Xianji Piao, Bumki Min, Namkyoo Park

Abstract: Chirality is a universal feature in nature, as observed in fermion interactions and DNA helicity. Much attention has been given to chiral interactions of light, not only regarding its physical interpretation but also focusing on intriguing phenomena in excitation, absorption, refraction, and topological phase. Although recent progress in metamaterials has spurred artificial engineering of chiralit… ▽ More Chirality is a universal feature in nature, as observed in fermion interactions and DNA helicity. Much attention has been given to chiral interactions of light, not only regarding its physical interpretation but also focusing on intriguing phenomena in excitation, absorption, refraction, and topological phase. Although recent progress in metamaterials has spurred artificial engineering of chirality, most approaches are founded on the same principle of the mixing of electric and magnetic responses. Here we propose nonmagnetic chiral interactions of light based on low-dimensional eigensystems. Exploiting the mixing of amplifying and decaying electric modes in a complex material, the low-dimensionality in polarization space having a chiral eigenstate is realized, in contrast to 2-dimensional eigensystems in previous approaches. The existence of optical spin black hole from low-dimensional chirality is predicted, and singular interactions between chiral waves are confirmed experimentally in parity-time-symmetric metamaterials. △ Less

Submitted 8 September, 2016; v1 submitted 30 August, 2014; originally announced September 2014.

Journal ref: Optica 3, 1025-1032 (2016)