-
Modeling and Testing Superconducting Artificial CPW Lines Suitable for Parametric Amplification
Authors:
F. P. Mena,
D. Valenzuela,
C. Espinoza,
F. Pizarro,
B. -K. Tan,
D. J. Thoen,
J. J. A. Baselmans,
R. Finger
Abstract:
Achieving amplification with high gain and quantum-limited noise is a difficult problem to solve. Parametric amplification using a superconducting transmission line with high kinetic inductance is a promising technology not only to solve this problem but also adding several benefits. When compared with other technologies, they have the potential of improving power saturation, achieving larger frac…
▽ More
Achieving amplification with high gain and quantum-limited noise is a difficult problem to solve. Parametric amplification using a superconducting transmission line with high kinetic inductance is a promising technology not only to solve this problem but also adding several benefits. When compared with other technologies, they have the potential of improving power saturation, achieving larger fractional bandwidths and operating at higher frequencies. In this type of amplifiers, selecting the proper transmission line is a key element in their design. Given current fabrication limitations, traditional lines such as coplanar waveguides (CPW), are not ideal for this purpose since it is difficult to make them with the proper characteristic impedance for good matching and slow-enough phase velocity for making them more compact. Capacitively-loaded lines, also known as artificial lines, are a good solution to this problem. However, few design rules or models have been presented to guide their accurate design. This fact is even more crucial considering that they are usually fabricated in the form of Floquet lines that have to be designed carefully to suppress undesired harmonics appearing in the parametric process. In this article we present, firstly, a new modelling strategy, based on the use of electromagnetic-simulation software, and, secondly, a first-principles model that facilitate and speed the design of CPW artificial lines and of Floquet lines made out of them. Then, we present comparisons with experimental results that demonstrate their accuracy. Finally, the theoretical model allows to predict the high-frequency behaviour of the artificial lines showing that they are good candidates for implementing parametric amplifiers above 100 GHz.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
The effect of complex dispersion and characteristic impedance on the gain of superconducting traveling-wave kinetic inductance parametric amplifiers
Authors:
Javier Carrasco,
Daniel Valenzuela,
Claudio Falcón,
Ricardo Finger,
F. Patricio Mena
Abstract:
Superconducting traveling-wave parametric amplifiers are a promising amplification technology suitable for applications in submillimeter astronomy. Their implementation relies on the use of Floquet transmission lines in order to create strong stopbands to suppress undesired harmonics. In the design process, amplitude equations are used to predict their gain, operation frequency, and bandwidth. How…
▽ More
Superconducting traveling-wave parametric amplifiers are a promising amplification technology suitable for applications in submillimeter astronomy. Their implementation relies on the use of Floquet transmission lines in order to create strong stopbands to suppress undesired harmonics. In the design process, amplitude equations are used to predict their gain, operation frequency, and bandwidth. However, usual amplitude equations do not take into account the real and imaginary parts of the dispersion and characteristic impedance that results from the use of Floquet lines, hindering reliable design. In order to overcome this limitation, we have used the multiple-scales method to include those effects. We demonstrate that complex dispersion and characteristic impedance have a stark effect on the transmission line's gain, even suppressing it completely in certain cases. The equations presented here can, thus, guide to a better design and understanding of the properties of this kind of amplifiers.
△ Less
Submitted 2 October, 2022;
originally announced October 2022.
-
Wideband 67-116 GHz receiver development for ALMA Band 2
Authors:
P. Yagoubov,
T. Mroczkowski,
V. Belitsky,
D. Cuadrado-Calle,
F. Cuttaia,
G. A. Fuller,
J. -D. Gallego,
A. Gonzalez,
K. Kaneko,
P. Mena,
R. Molina,
R. Nesti,
V. Tapia,
F. Villa,
M. Beltran,
F. Cavaliere,
J. Ceru,
G. E. Chesmore,
K. Coughlin,
C. De Breuck,
M. Fredrixon,
D. George,
H. Gibson,
J. Golec,
A. Josaitis
, et al. (21 additional authors not shown)
Abstract:
ALMA has been operating since 2011, but has not yet been populated with the full suite of intended frequency bands. In particular, ALMA Band 2 (67-90 GHz) is the final band in the original ALMA band definition to be approved for production. We aim to produce a wideband, tuneable, sideband-separating receiver with 28 GHz of instantaneous bandwidth per polarisation operating in the sky frequency ran…
▽ More
ALMA has been operating since 2011, but has not yet been populated with the full suite of intended frequency bands. In particular, ALMA Band 2 (67-90 GHz) is the final band in the original ALMA band definition to be approved for production. We aim to produce a wideband, tuneable, sideband-separating receiver with 28 GHz of instantaneous bandwidth per polarisation operating in the sky frequency range 67-116 GHz. Our design anticipates new ALMA requirements following the recommendations in the 2030 ALMA Development Roadmap. The cryogenic cartridge is designed to be compatible with the ALMA Band 2 cartridge slot, where the coldest components -- the feedhorns, orthomode transducers, and cryogenic low noise amplifiers -- operate at a temperature of 15 K. We use multiple simulation methods and tools to optimise our designs for both the passive optics and the active components. The cryogenic cartridge interfaces with a room temperature cartridge hosting the local oscillator (LO) and the downconverter module. This warm cartridge is largely based on GaAs semiconductor technology and is optimised to match the cryogenic receiver bandwidth with the required instantaneous LO tuning range. Our collaboration has designed, fabricated, and tested multiple technical solutions for each of the components, producing a state-of-the-art receiver covering the full ALMA Band 2 & 3 atmospheric window. The receiver is suitable for deployment on ALMA in the coming years, and is capable of dual-polarisation, sideband-separating observations in intermediate frequency bands spanning 4-18 GHz, for a total of 28 GHz on-sky bandwidth per polarisation channel. We conclude that the 67-116 GHz wideband implementation for ALMA Band 2 is now feasible, and this receiver is a compelling instrumental upgrade that will enhance observational capabilities and scientific reach.
△ Less
Submitted 20 February, 2020; v1 submitted 20 December, 2019;
originally announced December 2019.
-
Experimental testbed for seawater channel characterization
Authors:
Pablo Mena,
Pablo Dorta-Naranjo,
Gara Quintana,
Iván Pérez-Álvarez,
Eugenio Jiménez,
Santiago Zazo,
Marina Pérez,
Laura Cardona,
J. Joaquin Hernández
Abstract:
Shallow seawaters are problematic for acoustic and optical communications. Sensor networks based on electromagnetic (EM) communications are evaluated in this environment. In order to characterize the subaquatic channel, several measurement systems have been designed, built and tested in the sea obtaining very reliable results. Experiments carried out with dipoles and loop antennas showed serious d…
▽ More
Shallow seawaters are problematic for acoustic and optical communications. Sensor networks based on electromagnetic (EM) communications are evaluated in this environment. In order to characterize the subaquatic channel, several measurement systems have been designed, built and tested in the sea obtaining very reliable results. Experiments carried out with dipoles and loop antennas showed serious disagreement with the state of the art, especially when dipole antennas are used. Dipoles performance was poor while magnetic loops showed relevant results. Measurement system is described in detail and real attenuation of the subaquatic channel is obtained for several distances and antennas. Finally, measured and simulated results are compared with good agreement.
△ Less
Submitted 13 April, 2016;
originally announced April 2016.
-
Investigation on Radio Wave Propagation in Shallow Seawater: Simulations and Measurements
Authors:
Eugenio Jimenez,
Gara Quintana,
Pablo Mena,
Pablo Dorta,
Ivan Perez-Alvarez,
Santiago Zazo,
Marina Perez,
Eduardo Quevedo
Abstract:
The authors present full wave simulations and experimental results of propagation of electromagnetic waves in shallow seawaters. Transmitter and receiver antennas are ten-turns loops placed on the seabed. Some propagation frameworks are presented and simulated. Finally, simulation results are compared with experimental ones.
The authors present full wave simulations and experimental results of propagation of electromagnetic waves in shallow seawaters. Transmitter and receiver antennas are ten-turns loops placed on the seabed. Some propagation frameworks are presented and simulated. Finally, simulation results are compared with experimental ones.
△ Less
Submitted 13 April, 2016;
originally announced April 2016.
