-
Machine Learning Based Prediction of Proton Conductivity in Metal-Organic Frameworks
Authors:
Seunghee Han,
Byeong Gwan Lee,
Dae Woon Lim,
Jihan Kim
Abstract:
Recently, metal-organic frameworks (MOFs) have demonstrated their potential as solid-state electrolytes in proton exchange membrane fuel cells. However, the number of MOFs reported to exhibit proton conductivity remains limited, and the mechanisms underlying this phenomenon are not fully elucidated, complicating the design of proton-conductive MOFs. In response, we developed a comprehensive databa…
▽ More
Recently, metal-organic frameworks (MOFs) have demonstrated their potential as solid-state electrolytes in proton exchange membrane fuel cells. However, the number of MOFs reported to exhibit proton conductivity remains limited, and the mechanisms underlying this phenomenon are not fully elucidated, complicating the design of proton-conductive MOFs. In response, we developed a comprehensive database of proton-conductive MOFs and applied machine learning techniques to predict their proton conductivity. Our approach included the construction of both descriptor-based and transformer-based models. Notably, the transformer-based transfer learning (Freeze) model performed the best with a mean absolute error (MAE) of 0.91, suggesting that the proton conductivity of MOFs can be estimated within one order of magnitude using this model. Additionally, we employed feature importance and principal component analysis to explore the factors influencing proton conductivity. The insights gained from our database and machine learning model are expected to facilitate the targeted design of proton-conductive MOFs.
△ Less
Submitted 17 July, 2024; v1 submitted 18 June, 2024;
originally announced July 2024.
-
Changes in boiling controlled by molar concentration-dependent diffusion of surfactants
Authors:
Mario R. Mata,
Matic Može,
Armin Hadžić,
Giseop Lee,
Blake Naccarato,
Isaac Berk,
Iztok Golobič,
H. Jeremy Cho
Abstract:
Boiling is a prevalent phase-change process that plays a vital role in facilitating efficient heat transfer from a heating surface. While this heat transfer mechanism is generally effective, a rapid increase in surface temperature can lead to hydrodynamic instabilities, resulting in a boiling crisis. Previous studies have shown that surfactants often improve boiling performance and change the boil…
▽ More
Boiling is a prevalent phase-change process that plays a vital role in facilitating efficient heat transfer from a heating surface. While this heat transfer mechanism is generally effective, a rapid increase in surface temperature can lead to hydrodynamic instabilities, resulting in a boiling crisis. Previous studies have shown that surfactants often improve boiling performance and change the boiling crisis behavior. Conventional wisdom in this field attributes that these changes in boiling behavior are tied to the critical micelle concentration (CMC) of the particular surfactant. However, our work reveals that these changes in boiling behavior are independent of the CMC for three nonionic surfactants across a wide range of molar concentrations. In addition, visual snapshots of the bubbling behavior indicate changes in bubble formation, such as bubble size and nucleation site density, influenced by the molar concentration-dependent diffusion timescale of surfactants. Hence, these findings offer compelling evidence that boiling behavior, encompassing both boiling performance and boiling crisis, is governed by the dynamic adsorption of surfactants rather than dictated by the CMC. This becomes evident when quantifying the heat transfer coefficient (HTC) and critical heat flux (CHF) using the logarithm of molar concentration, as predicted by theory. Building upon these findings, we propose insights for controlling when CHF modification occurs in specific scenarios involving any surfactants. These insights hold significant potential for optimizing heat transfer processes and leveraging surfactants in energy-related applications to maximize boiling efficiency.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Charge-Transfer Hyperbolic Polaritons in $α$-MoO$_3$/graphene heterostructures
Authors:
J. Shen,
M. Chen,
V. Korostelev,
H. Kim,
P. Fathi-Hafshejani,
M. Mahjouri-Samani,
K. Klyukin,
G-H. Lee,
S. Dai
Abstract:
Charge transfer is a fundamental interface process that can be harnessed for light detection, photovoltaics, and photosynthesis. Recently, charge transfer was exploited in nanophotonics to alter plasmon polaritons by involving additional non-polaritonic materials to activate the charge transfer. Yet, direct charge transfer between polaritonic materials hasn't been demonstrated. We report the direc…
▽ More
Charge transfer is a fundamental interface process that can be harnessed for light detection, photovoltaics, and photosynthesis. Recently, charge transfer was exploited in nanophotonics to alter plasmon polaritons by involving additional non-polaritonic materials to activate the charge transfer. Yet, direct charge transfer between polaritonic materials hasn't been demonstrated. We report the direct charge transfer in pure polaritonic van der Waals (vdW) heterostructures of $α$-MoO$_3$/graphene. We extracted the Fermi energy of 0.6 eV for graphene by infrared nano-imaging of charge transfer hyperbolic polaritons in the vdW heterostructure. This unusually high Fermi energy is attributed to the charge transfer between graphene and $α$-MoO$_3$. Moreover, we have observed charge transfer hyperbolic polaritons in multiple energy-momentum dispersion branches with a wavelength elongation of up to 150%. With support from the DFT calculation, we find that the charge transfer between graphene and $α$-MoO$_3$, absent in mechanically assembled vdW heterostructures, is attributed to the relatively pristine heterointerface preserved in the epitaxially grown vdW heterostructure. The direct charge transfer and charge transfer hyperbolic polaritons demonstrated in our work hold great promise for developing nano-optical circuits, computational devices, communication systems, and light and energy manipulation devices.
△ Less
Submitted 14 May, 2024;
originally announced May 2024.
-
Realizing Visual Question Answering for Education: GPT-4V as a Multimodal AI
Authors:
Gyeong-Geon Lee,
Xiaoming Zhai
Abstract:
Educational scholars have analyzed various image data acquired from teaching and learning situations, such as photos that shows classroom dynamics, students' drawings with regard to the learning content, textbook illustrations, etc. Unquestioningly, most qualitative analysis of and explanation on image data have been conducted by human researchers, without machine-based automation. It was partiall…
▽ More
Educational scholars have analyzed various image data acquired from teaching and learning situations, such as photos that shows classroom dynamics, students' drawings with regard to the learning content, textbook illustrations, etc. Unquestioningly, most qualitative analysis of and explanation on image data have been conducted by human researchers, without machine-based automation. It was partially because most image processing artificial intelligence models were not accessible to general educational scholars or explainable due to their complex deep neural network architecture. However, the recent development of Visual Question Answering (VQA) techniques is accomplishing usable visual language models, which receive from the user a question about the given image and returns an answer, both in natural language. Particularly, GPT-4V released by OpenAI, has wide opened the state-of-the-art visual langauge model service so that VQA could be used for a variety of purposes. However, VQA and GPT-4V have not yet been applied to educational studies much. In this position paper, we suggest that GPT-4V contributes to realizing VQA for education. By 'realizing' VQA, we denote two meanings: (1) GPT-4V realizes the utilization of VQA techniques by any educational scholars without technical/accessibility barrier, and (2) GPT-4V makes educational scholars realize the usefulness of VQA to educational research. Given these, this paper aims to introduce VQA for educational studies so that it provides a milestone for educational research methodology. In this paper, chapter II reviews the development of VQA techniques, which primes with the release of GPT-4V. Chapter III reviews the use of image analysis in educational studies. Chapter IV demonstrates how GPT-4V can be used for each research usage reviewed in Chapter III, with operating prompts provided. Finally, chapter V discusses the future implications.
△ Less
Submitted 12 May, 2024;
originally announced May 2024.
-
Using ChatGPT for Science Learning: A Study on Pre-service Teachers' Lesson Planning
Authors:
Gyeong-Geon Lee,
Xiaoming Zhai
Abstract:
Despite the buzz around ChatGPT's potential, empirical studies exploring its actual utility in the classroom for learning remain scarce. This study aims to fill this gap by analyzing the lesson plans developed by 29 pre-service elementary teachers from a Korean university and assessing how they integrated ChatGPT into science learning activities. We first examined how the subject domains and teach…
▽ More
Despite the buzz around ChatGPT's potential, empirical studies exploring its actual utility in the classroom for learning remain scarce. This study aims to fill this gap by analyzing the lesson plans developed by 29 pre-service elementary teachers from a Korean university and assessing how they integrated ChatGPT into science learning activities. We first examined how the subject domains and teaching and learning methods/strategies were integrated with ChatGPT in the lesson plans. We then evaluated the lesson plans using a modified TPACK-based rubric. We further examined pre-service teachers' perceptions and concerns about integrating ChatGPT into science learning. Results show diverse applications of ChatGPT in different science domains. Fourteen types of teaching and learning methods/strategies were identified in the lesson plans. On average, the pre-service teachers' lesson plans scored high on the modified TPACK-based rubric, indicating a reasonable envisage of integrating ChatGPT into science learning, particularly in 'instructional strategies & ChatGPT'. However, they scored relatively lower on exploiting ChatGPT's functions toward its full potential compared to other aspects. The study also identifies both appropriate and inappropriate use cases of ChatGPT in lesson planning. Pre-service teachers anticipated ChatGPT to afford high-quality questioning, self-directed learning, individualized learning support, and formative assessment. Meanwhile, they also expressed concerns about its accuracy and the risks that students may be overly dependent on ChatGPT. They further suggested solutions to systemizing classroom dynamics between teachers and students. The study underscores the need for more research on the roles of generative AI in actual classroom settings and provides insights for future AI-integrated science learning.
△ Less
Submitted 18 January, 2024;
originally announced February 2024.
-
A Survey on Hypergraph Mining: Patterns, Tools, and Generators
Authors:
Geon Lee,
Fanchen Bu,
Tina Eliassi-Rad,
Kijung Shin
Abstract:
Hypergraphs are a natural and powerful choice for modeling group interactions in the real world, which are often referred to as higher-order networks. For example, when modeling collaboration networks, where collaborations can involve not just two but three or more people, employing hypergraphs allows us to explore beyond pairwise (dyadic) patterns and capture groupwise (polyadic) patterns. The ma…
▽ More
Hypergraphs are a natural and powerful choice for modeling group interactions in the real world, which are often referred to as higher-order networks. For example, when modeling collaboration networks, where collaborations can involve not just two but three or more people, employing hypergraphs allows us to explore beyond pairwise (dyadic) patterns and capture groupwise (polyadic) patterns. The mathematical complexity of hypergraphs offers both opportunities and challenges for learning and mining on hypergraphs, and hypergraph mining, which seeks to enhance our understanding of underlying systems through hypergraph modeling, gained increasing attention in research. Researchers have discovered various structural patterns in real-world hypergraphs, leading to the development of mining tools. Moreover, they have designed generators with the aim of reproducing and thereby shedding light on these patterns. In this survey, we provide a comprehensive overview of the current landscape of hypergraph mining, covering patterns, tools, and generators. We provide comprehensive taxonomies for them, and we also provide in-depth discussions to provide insights into future research on hypergraph mining.
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
Variational quantum eigensolver for closed-shell molecules with non-bosonic corrections
Authors:
Kyungmin Kim,
Sumin Lim,
Kyujin Shin,
Gwonhak Lee,
Yousung Jung,
Woomin Kyoung,
June-Koo Kevin Rhee,
Young Min Rhee
Abstract:
The realization of quantum advantage with noisy-intermediate-scale quantum (NISQ) machines has become one of the major challenges in computational sciences. Maintaining coherence of a physical system with more than ten qubits is a critical challenge that motivates research on compact system representations to reduce algorithm complexity. Toward this end, quantum simulations based on the variationa…
▽ More
The realization of quantum advantage with noisy-intermediate-scale quantum (NISQ) machines has become one of the major challenges in computational sciences. Maintaining coherence of a physical system with more than ten qubits is a critical challenge that motivates research on compact system representations to reduce algorithm complexity. Toward this end, quantum simulations based on the variational quantum eigensolver (VQE) is considered to be one of the most promising algorithms for quantum chemistry in the NISQ era. We investigate reduced mapping of one spatial orbital to a single qubit to analyze the ground state energy in a way that the Pauli operators of qubits are mapped to the creation/annihilation of singlet pairs of electrons. To include the effect of non-bosonic (or non-paired) excitations, we introduce a simple correction scheme in the electron correlation model approximated by the geometrical mean of the bosonic (or paired) terms. Employing it in a VQE algorithm, we assess ground state energies of H2O, N2, and Li2O in good agreements with full configuration interaction (FCI) models respectively, using only 6, 8, and 12 qubits with quantum gate depths proportional to the squares of the qubit counts. With the adopted seniority-zero approximation that uses only one half of the qubit counts of a conventional VQE algorithm, we find our non-bosonic correction method reaches reliable quantum chemistry simulations at least for the tested systems.
△ Less
Submitted 8 November, 2023; v1 submitted 11 October, 2023;
originally announced October 2023.
-
Sampling Error Analysis in Quantum Krylov Subspace Diagonalization
Authors:
Gwonhak Lee,
Dongkeun Lee,
Joonsuk Huh
Abstract:
Quantum Krylov subspace diagonalization (QKSD) is an emerging method used in place of quantum phase estimation in the early fault-tolerant era, where limited quantum circuit depth is available. In contrast to the classical Krylov subspace diagonalization (KSD) or the Lanczos method, QKSD exploits the quantum computer to efficiently estimate the eigenvalues of large-size Hamiltonians through a fast…
▽ More
Quantum Krylov subspace diagonalization (QKSD) is an emerging method used in place of quantum phase estimation in the early fault-tolerant era, where limited quantum circuit depth is available. In contrast to the classical Krylov subspace diagonalization (KSD) or the Lanczos method, QKSD exploits the quantum computer to efficiently estimate the eigenvalues of large-size Hamiltonians through a faster Krylov projection. However, unlike classical KSD, which is solely concerned with machine precision, QKSD is inherently accompanied by errors originating from a finite number of samples. Moreover, due to difficulty establishing an artificial orthogonal basis, ill-conditioning problems are often encountered, rendering the solution vulnerable to noise. In this work, we present a nonasymptotic theoretical framework to assess the relationship between sampling noise and its effects on eigenvalues. We also propose an optimal solution to cope with large condition numbers by eliminating the ill-conditioned bases. Numerical simulations of the one-dimensional Hubbard model demonstrate that the error bound of finite samplings accurately predicts the experimental errors in well-conditioned regions.
△ Less
Submitted 22 July, 2024; v1 submitted 30 July, 2023;
originally announced July 2023.
-
Scaling in local to global condensation of wealth on sparse networks
Authors:
Hyun Gyu Lee,
Deok-Sun Lee
Abstract:
The prevalence of wealth inequality propels us to characterize its origin and progression, via empirical and theoretical studies. The Yard-Sale(YS) model, in which a portion of the smaller wealth is transferred between two individuals, culminates in the concentration of almost all wealth to a single individual, while distributing rest of the wealth with a power-law of exponent one. By incorporatin…
▽ More
The prevalence of wealth inequality propels us to characterize its origin and progression, via empirical and theoretical studies. The Yard-Sale(YS) model, in which a portion of the smaller wealth is transferred between two individuals, culminates in the concentration of almost all wealth to a single individual, while distributing rest of the wealth with a power-law of exponent one. By incorporating redistribution to the model, in which the transferred wealth is proportional to the sender's wealth, we show that such extreme inequality is suppressed if the frequency ratio of redistribution to the YS-type exchange exceeds the inverse of the population size. Studying our model on a sparsely-connected population, we find that the wealth inequality ceases to grow for a period, when local rich nodes can no longer acquire wealth from their broke nearest neighbors. Subsequently, inequality resumes growth due to the redistribution effect by allowing locally amassed wealth to move and coalesce. Analyzing the Langevin equations and the coalescing random walk on complex networks, we elucidate the scaling behaviors of wealth inequality in those multiple phases. These findings reveal the influence of network structure on wealth distribution, offering a novel perspective on wealth inequality.
△ Less
Submitted 2 January, 2024; v1 submitted 28 July, 2023;
originally announced July 2023.
-
Trap-limited electrical properties of organic semiconductor devices
Authors:
Donghyun Ko,
Gyuhyeon Lee,
Kyu-Myung Lee,
Yongsup Park,
Jaesang Lee
Abstract:
We investigated the electrical properties of a unipolar organic device with traps that were intentionally inserted into a particular position in the device. Depending on their inserted position, the traps significantly alter the charge distribution and the resulting electric field as well as the charge transport behavior in the device. In particular, as the traps are situated closer to a charge-in…
▽ More
We investigated the electrical properties of a unipolar organic device with traps that were intentionally inserted into a particular position in the device. Depending on their inserted position, the traps significantly alter the charge distribution and the resulting electric field as well as the charge transport behavior in the device. In particular, as the traps are situated closer to a charge-injection electrode, the band bending of a trap-containing organic layer occurs more strongly so that it effectively imposes a higher charge injection barrier. We propose an electrical model that fully accounts for the observed change in the electrical properties of the device with respect to the trap position.
△ Less
Submitted 19 February, 2023;
originally announced February 2023.
-
Technologies to Capture CO$_2$ directly from Ambient Air
Authors:
Gahyun Annie Lee,
Xiaoyang Shi,
Ah-Hyung Alissa Park
Abstract:
Building a carbon-neutral world needs to remove the excess CO$_2$ that has already been dumped into the atmosphere. The sea, soil, vegetation, and rocks on Earth all naturally uptake CO$_2$ from the atmosphere. Human beings can accelerate these processes in specific ways. The review summarizes the present Direct Air Capture (DAC) technology that contribute to Negative Emissions. Research currently…
▽ More
Building a carbon-neutral world needs to remove the excess CO$_2$ that has already been dumped into the atmosphere. The sea, soil, vegetation, and rocks on Earth all naturally uptake CO$_2$ from the atmosphere. Human beings can accelerate these processes in specific ways. The review summarizes the present Direct Air Capture (DAC) technology that contribute to Negative Emissions. Research currently being done has suggested future perspectives and directions of various methods for Negative Emission. New generations of technologies have emerged as a result of recent advancements in surface chemistry, material synthesis, and engineering design. These technologies may influence the large-scale deployment of existing CO$_2$ capture technologies in the future.
△ Less
Submitted 1 November, 2022;
originally announced November 2022.
-
Scalably manufactured high-index atomic layer-polymer hybrid metasurfaces for high-efficiency virtual reality metaoptics in the visible
Authors:
Joohoon Kim,
Junhwa Seong,
Wonjoong Kim,
Gun-Yeal Lee,
Hongyoon Kim,
Seong-Won Moon,
Jaehyuck Jang,
Yeseul Kim,
Younghwan Yang,
Dong Kyo Oh,
Chanwoong Park,
Hojung Choi,
Hyeongjin Jeon,
Kyung-Il Lee,
Byoungho Lee,
Heon Lee,
Junsuk Rho
Abstract:
Metalenses, which exhibit superior light-modulating performance with sub-micrometer-scale thicknesses, are suitable alternatives to conventional bulky refractive lenses. However, fabrication limitations, such as a high cost, low throughput, and small patterning area, hinder their mass production. Here, we demonstrate the mass production of low-cost, high-throughput, and large-aperture visible meta…
▽ More
Metalenses, which exhibit superior light-modulating performance with sub-micrometer-scale thicknesses, are suitable alternatives to conventional bulky refractive lenses. However, fabrication limitations, such as a high cost, low throughput, and small patterning area, hinder their mass production. Here, we demonstrate the mass production of low-cost, high-throughput, and large-aperture visible metalenses using an argon fluoride immersion scanner and wafer-scale nanoimprint lithography. Once a 12-inch master stamp is imprinted, hundreds of centimeter-scale metalenses can be fabricated. To enhance light confinement, the printed metasurface is thinly coated with a high-index film, resulting in drastic increase of conversion efficiency. As a proof of concept, a prototype of a virtual reality device with ultralow thickness is demonstrated with the fabricated metalens.
△ Less
Submitted 26 August, 2022;
originally announced August 2022.
-
Motion-selective coherent population trapping for subrecoil cooling of optically trapped atoms outside the Lamb-Dicke regime
Authors:
Hyun Gyung Lee,
Sooyoung Park,
Meung Ho Seo,
D. Cho
Abstract:
We propose a scheme that combines velocity-selective coherent population trapping (CPT) and Raman sideband cooling (RSC) for subrecoil cooling of optically trapped atoms outside the Lamb-Dicke regime. This scheme is based on an inverted $\mathsf{Y}$ configuration in an alkali-metal atom. It consists of a $Λ$ formed by two Raman transitions between the ground hyperfine levels and the $D$ transition…
▽ More
We propose a scheme that combines velocity-selective coherent population trapping (CPT) and Raman sideband cooling (RSC) for subrecoil cooling of optically trapped atoms outside the Lamb-Dicke regime. This scheme is based on an inverted $\mathsf{Y}$ configuration in an alkali-metal atom. It consists of a $Λ$ formed by two Raman transitions between the ground hyperfine levels and the $D$ transition, allowing RSC along two paths and formation of a CPT dark state. Using state-dependent difference in vibration frequency of the atom in a circularly polarized trap, we can tune the $Λ$ to make only the motional ground state a CPT dark state. We call this scheme motion-selective coherent population trapping (MSCPT). We write the master equations for RSC and MSCPT and solve them numerically for a $^{87}$Rb atom in a one-dimensional optical lattice when the Lamb-Dicke parameter is 1. Although MSCPT reaches the steady state slowly compared with RSC, the former consistently produces colder atoms than the latter. The numerical results also show that subrecoil cooling by MSCPT outside the Lamb-Dicke regime is possible under a favorable, yet experimentally feasible, condition. We explain this performance quantitatively by calculating the relative darkness of each motional state. Finally, we discuss on application of the MSCPT scheme to an optically trapped diatomic polar molecule whose Stark shift and vibration frequency exhibit large variations depending on the rotational quantum number.
△ Less
Submitted 26 May, 2022; v1 submitted 2 May, 2022;
originally announced May 2022.
-
A Strategic Approach to Advance Magnet Technology for Next Generation Colliders
Authors:
G. Ambrosio,
K. Amm,
M. Anerella,
G. Apollinari,
D. Arbelaez,
B. Auchmann,
S. Balachandran,
M. Baldini,
A. Ballarino,
S. Barua,
E. Barzi,
A. Baskys,
C. Bird,
J. Boerme,
E. Bosque,
L. Brouwer,
S. Caspi,
N. Cheggour,
G. Chlachidze,
L. Cooley,
D. Davis,
D. Dietderich,
J. DiMarco,
L. English,
L. Garcia Fajardo
, et al. (52 additional authors not shown)
Abstract:
Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the domi…
▽ More
Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the dominant cost driver for future collider facilities. As the community considers opportunities to explore new energy frontiers, the importance of advanced magnet technology - both in terms of magnet performance and in the magnet technology's potential for cost reduction - is evident, as the technology status is essential for informed decisions on targets for physics reach and facility feasibility.
△ Less
Submitted 26 March, 2022;
originally announced March 2022.
-
Advancing Superconducting Magnet Diagnostics for Future Colliders
Authors:
M. Marchevsky,
R. Teyber,
G. S. Lee,
M. Turqueti,
M. Baldini,
E. Barzi,
J. DiMarco,
S. Krave,
V. Marinozzi,
S. Stoynev,
P. Joshi,
J. Muratore,
D. Davis
Abstract:
Future colliders will operate at increasingly high magnetic fields pushing limits of electromagnetic and mechanical stress on the conductor [1]. Understanding factors affecting superconducting (SC) magnet performance in challenging conditions of high mechanical stress and cryogenic temperatures is only possible with the use of advanced magnet diagnostics. Diagnostics provide a unique observation w…
▽ More
Future colliders will operate at increasingly high magnetic fields pushing limits of electromagnetic and mechanical stress on the conductor [1]. Understanding factors affecting superconducting (SC) magnet performance in challenging conditions of high mechanical stress and cryogenic temperatures is only possible with the use of advanced magnet diagnostics. Diagnostics provide a unique observation window into mechanical and electromagnetic processes associated with magnet operation, and give essential feedback to magnet design, simulations and material research activities. Development of novel diagnostic capabilities is therefore an integral part of next-generation magnet development. In this paper, we summarize diagnostics development needs from a prospective of the US Magnet Development Program (MDP), and define main research directions that could shape this field in the near future.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Physics Opportunities for the Fermilab Booster Replacement
Authors:
John Arrington,
Joshua Barrow,
Brian Batell,
Robert Bernstein,
Nikita Blinov,
S. J. Brice,
Ray Culbertson,
Patrick deNiverville,
Vito Di Benedetto,
Jeff Eldred,
Angela Fava,
Laura Fields,
Alex Friedland,
Andrei Gaponenko,
Corrado Gatto,
Stefania Gori,
Roni Harnik,
Richard J. Hill,
Daniel M. Kaplan,
Kevin J. Kelly,
Mandy Kiburg,
Tom Kobilarcik,
Gordan Krnjaic,
Gabriel Lee,
B. R. Littlejohn
, et al. (27 additional authors not shown)
Abstract:
This white paper presents opportunities afforded by the Fermilab Booster Replacement and its various options. Its goal is to inform the design process of the Booster Replacement about the accelerator needs of the various options, allowing the design to be versatile and enable, or leave the door open to, as many options as possible. The physics themes covered by the paper include searches for dark…
▽ More
This white paper presents opportunities afforded by the Fermilab Booster Replacement and its various options. Its goal is to inform the design process of the Booster Replacement about the accelerator needs of the various options, allowing the design to be versatile and enable, or leave the door open to, as many options as possible. The physics themes covered by the paper include searches for dark sectors and new opportunities with muons.
△ Less
Submitted 8 March, 2022;
originally announced March 2022.
-
Freeze-frame approach for robust single-molecule tip-enhnaced Raman spectroscopy at room temperature
Authors:
Mingu Kang,
Hyunwoo Kim,
Elham Oleiki,
Yeonjeong Koo,
Hyeongwoo Lee,
Jinseong Choi,
Taeyong Eom,
Geunsik Lee,
Yung Doug Suh,
Kyoung-Duck Park
Abstract:
A quantitative single-molecule tip-enhanced Raman spectroscopy (TERS) study at room temperature remained a challenge due to the rapid structural dynamics of molecules exposed to air. Here, we demonstrate the single-molecule level hyperspectral TERS imaging of brilliant cresyl blue (BCB) at room temperature for the first time, along with quantitative spectral analyses. Freeze-frame approach using a…
▽ More
A quantitative single-molecule tip-enhanced Raman spectroscopy (TERS) study at room temperature remained a challenge due to the rapid structural dynamics of molecules exposed to air. Here, we demonstrate the single-molecule level hyperspectral TERS imaging of brilliant cresyl blue (BCB) at room temperature for the first time, along with quantitative spectral analyses. Freeze-frame approach using a thin Al2O3 capping layer, which suppresses spectral diffusions and inhibits chemical reactions and contaminations in air, enabled reliable and robust chemical imaging. For the molecules resolved spatially in the TERS image, a clear Raman peak variation up to 7.5 cm-1 is observed, which cannot be found in molecular ensembles. From density functional theory-based quantitative analyses of the varied TERS peaks, we reveal the conformational heterogeneity at the single-molecule level. This work provides a facile way to investigate the single-molecule properties in interacting media, expanding the scope of single-molecule vibrational spectroscopy.
△ Less
Submitted 31 March, 2022; v1 submitted 25 October, 2021;
originally announced October 2021.
-
Efficient conversion of orbital Hall current to spin current for spin-orbit torque switching
Authors:
Soogil Lee,
Min-Gu Kang,
Dongwook Go,
Dohyoung Kim,
Jun-Ho Kang,
Taekhyeon Lee,
Geun-Hee Lee,
Nyun Jong Lee,
Sanghoon Kim,
Kab-Jin Kim,
Kyung-Jin Lee,
Byong-Guk Park
Abstract:
Spin Hall effect, an electric generation of spin current, allows for efficient control of magnetization. Recent theory revealed that orbital Hall effect creates orbital current, which can be much larger than spin Hall-induced spin current. However, orbital current cannot directly exert a torque on a ferromagnet, requiring a conversion process from orbital current to spin current. Here, we report t…
▽ More
Spin Hall effect, an electric generation of spin current, allows for efficient control of magnetization. Recent theory revealed that orbital Hall effect creates orbital current, which can be much larger than spin Hall-induced spin current. However, orbital current cannot directly exert a torque on a ferromagnet, requiring a conversion process from orbital current to spin current. Here, we report two effective methods of the conversion through spin-orbit coupling engineering, which allows us to unambiguously demonstrate orbital-current-induced spin torque, or orbital Hall torque. We find that orbital Hall torque is greatly enhanced by introducing either a rare-earth ferromagnet Gd or a Pt interfacial layer with strong spin-orbit coupling in Cr/ferromagnet structures, indicating that the orbital current generated in Cr is efficiently converted into spin current in the Gd or Pt layer. Furthermore, we show that the orbital Hall torque can facilitate the reduction of switching current of perpendicular magnetization in spin-orbit-torque-based spintronic devices.
△ Less
Submitted 3 May, 2022; v1 submitted 4 June, 2021;
originally announced June 2021.
-
Active restructuring of cytoskeleton composites leads to increased mechanical stiffness, memory, and heterogeneity
Authors:
Janet Y. Sheung,
Daisy H. Achiriloaie,
Karthik Peddireddy,
Gloria Lee,
Michael J. Rust,
Moumita Das,
Jennifer L. Ross,
Rae M. Robertson-Anderson
Abstract:
The composite cytoskeleton, comprising interacting networks of semiflexible actin and rigid microtubules, actively generates forces and restructures using motor proteins such as myosins to enable key mechanical processes including cell motility and mitosis. Yet, how motor-driven activity alters the mechanics of cytoskeleton composites remains an open challenge. Here, we perform optical tweezers mi…
▽ More
The composite cytoskeleton, comprising interacting networks of semiflexible actin and rigid microtubules, actively generates forces and restructures using motor proteins such as myosins to enable key mechanical processes including cell motility and mitosis. Yet, how motor-driven activity alters the mechanics of cytoskeleton composites remains an open challenge. Here, we perform optical tweezers microrheology on actin-microtubule composites driven by myosin II motors to show that motor activity increases the linear viscoelasticity and elastic storage of the composite by active restructuring to a network of tightly-packed filament clusters and bundles. Our nonlinear microrheology measurements performed hours after cessation of activity show that the motor-contracted structure is stable and robust to nonlinear forcing. Unique features of the nonlinear response include increased mechanical stiffness, memory and heterogeneity, coupled with suppressed filament bending following motor-driven restructuring. Our results shed important new light onto the interplay between viscoelasticity and non-equilibrium dynamics in active polymer composites such as the cytoskeleton.
△ Less
Submitted 7 May, 2022; v1 submitted 6 May, 2021;
originally announced May 2021.
-
Active Cytoskeletal Composites Display Emergent Tunable Contractility and Restructuring
Authors:
Gloria Lee,
Gregor Leech,
Pancy Lwin,
Jonathan Michel,
Christopher Currie,
Michael J. Rust,
Jennifer L. Ross,
Ryan J. McGorty,
Moumita Das,
Rae M. Robertson-Anderson
Abstract:
The cytoskeleton is a model active matter system that controls diverse cellular processes from division to motility. While both active actomyosin dynamics and actin-microtubule interactions are key to the cytoskeleton's versatility and adaptability, an understanding of their interplay is lacking. Here, we couple microscale experiments with mechanistic modeling to elucidate how connectivity, rigidi…
▽ More
The cytoskeleton is a model active matter system that controls diverse cellular processes from division to motility. While both active actomyosin dynamics and actin-microtubule interactions are key to the cytoskeleton's versatility and adaptability, an understanding of their interplay is lacking. Here, we couple microscale experiments with mechanistic modeling to elucidate how connectivity, rigidity, and force-generation affect emergent material properties in in vitro composites of actin, tubulin, and myosin. We use time-resolved differential dynamic microscopy and spatial image autocorrelation to show that ballistic contraction occurs in composites with sufficient flexibility and motor density, but that a critical fraction of microtubules is necessary to sustain controlled dynamics. Our active double-network models reveal that percolated actomyosin networks are essential for contraction, but that networks with comparable actin and microtubule densities can uniquely resist mechanical stresses while simultaneously supporting substantial restructuring. Our findings provide a much-needed blueprint for designing cytoskeleton-inspired materials that couple tunability with resilience and adaptability.
△ Less
Submitted 8 April, 2021;
originally announced April 2021.
-
Conformational heterogeneity of molecules physisorbed on a gold surface at room temperature
Authors:
Mingu Kang,
Hyunwoo Kim,
Elham Oleiki,
Yeonjeong Koo,
Hyeongwoo Lee,
Huitae Joo,
Jinseong Choi,
Taeyong Eom,
Geunsik Lee,
Yung Doug Suh,
Kyoung-Duck Park
Abstract:
A quantitative single-molecule tip-enhanced Raman spectroscopy (TERS) study at room temperature remained a challenge due to the rapid structural dynamics of molecules exposed to air. Here, we demonstrate the hyperspectral TERS imaging of single or a few brilliant cresyl blue (BCB) molecules at room temperature, along with quantitative spectral analyses. Robust chemical imaging is enabled by the fr…
▽ More
A quantitative single-molecule tip-enhanced Raman spectroscopy (TERS) study at room temperature remained a challenge due to the rapid structural dynamics of molecules exposed to air. Here, we demonstrate the hyperspectral TERS imaging of single or a few brilliant cresyl blue (BCB) molecules at room temperature, along with quantitative spectral analyses. Robust chemical imaging is enabled by the freeze-frame approach using a thin Al$_{2}$O$_{3}$ capping layer, which suppresses spectral diffusions and inhibits chemical reactions and contaminations in air. For the molecules resolved spatially in the TERS image, a clear Raman peak variation up to 7.5 cm$^{-1}$ is observed, which cannot be found in molecular ensembles. From density functional theory-based quantitative analyses of the varied TERS peaks, we reveal the conformational heterogeneity at the single-molecule level. This work provides a facile way to investigate the single-molecule properties in interacting media, expanding the scope of single-molecule vibrational spectroscopy studies.
△ Less
Submitted 31 March, 2022; v1 submitted 3 February, 2021;
originally announced February 2021.
-
Room temperature self-assembly of cation-free guanine quartet network nucleated from Mo-induced defect on decorated Au(111) with graphene nanoribbons
Authors:
Amirreza Ghassami,
Elham Oleiki,
Dong Yeon Kim,
Hyung-Joon Shin,
Geunsik Lee,
Kwang S. Kim
Abstract:
Guanine-quadruplex, consisting of several stacked guanine-quartets (GQs), has emerged as an important category of novel molecular targets with applications from nanoelectronic devices to anticancer drugs. Incorporation of metal cations into GQ structure is utilized to form stable G-quadruplexes, while no other passage has been reported yet. Here we report the room temperature (RT) molecular self-a…
▽ More
Guanine-quadruplex, consisting of several stacked guanine-quartets (GQs), has emerged as an important category of novel molecular targets with applications from nanoelectronic devices to anticancer drugs. Incorporation of metal cations into GQ structure is utilized to form stable G-quadruplexes, while no other passage has been reported yet. Here we report the room temperature (RT) molecular self-assembly of extensive metal-free GQ networks on Au(111) surface. Surface defect induced by an implanted molybdenum atom within Au(111) surface is used to nucleate and stabilize the cation-free GQ network. Additionally, the decorated Au(111) surface with 7-armchair graphene nanoribbons (7-AGNRs) results in more extensive GQ networks by curing the disordered phase nucleated from Au step edges spatially and chemically. Scanning tunneling microscopy/spectroscopy (STM/STS) and density functional theory (DFT) calculations confirm GQ networks' formation and unravel the nucleation and growth mechanism. This method stimulates cation-free G-quartet network formation at RT and can lead to stabilizing new emerging molecular self-assembly.
△ Less
Submitted 31 January, 2021;
originally announced February 2021.
-
Dispersion control in pressure-driven flow through bowed rectangular microchannels
Authors:
Garam Lee,
Alan Luner,
Jeremy Marzuola,
Daniel M. Harris
Abstract:
In fully-developed pressure-driven flow, the spreading of a dissolved solute is enhanced in the flow direction due to transverse velocity variations in a phenomenon now commonly referred to as Taylor-Aris dispersion. It is well understood that the characteristics of the dispersion are sensitive to the channel's cross-sectional geometry. Here we demonstrate a method for manipulation of dispersion i…
▽ More
In fully-developed pressure-driven flow, the spreading of a dissolved solute is enhanced in the flow direction due to transverse velocity variations in a phenomenon now commonly referred to as Taylor-Aris dispersion. It is well understood that the characteristics of the dispersion are sensitive to the channel's cross-sectional geometry. Here we demonstrate a method for manipulation of dispersion in a single rectangular microchannel via controlled deformation of its upper wall. Using a rapidly prototyped multi-layer microchip, the channel wall is deformed by a controlled pressure source allowing us to characterize the dependence of the dispersion on the deflection of the channel wall and overall channel aspect ratio. For a given channel aspect ratio, an optimal deformation to minimize dispersion is found, consistent with prior numerical and theoretical predictions. Our experimental measurements are also compared directly to numerical predictions using an idealized geometry.
△ Less
Submitted 19 February, 2021; v1 submitted 6 January, 2021;
originally announced January 2021.
-
A Low-Frequency Torsion Pendulum with Interferometric Readout
Authors:
M. P. Ross,
K. Venkateswara,
C. A. Hagedorn,
C. J. Leupold,
P. W. F. Forsyth,
J. D. Wegner,
E. A. Shaw,
J. G. Lee,
J. H. Gundlach
Abstract:
We describe a torsion pendulum with a large mass-quadrupole moment and a resonant frequency of 2.8 mHz, whose angle is measured using a modified Michelson interferometer. The system achieved noise levels of $\sim200\ \text{prad}/\sqrt{\text{Hz}}$ between 0.2-30 Hz and $\sim10\ \text{prad}/\sqrt{\text{Hz}}$ above 100 Hz. Such a system can be applied to a broad range of fields from the study of rota…
▽ More
We describe a torsion pendulum with a large mass-quadrupole moment and a resonant frequency of 2.8 mHz, whose angle is measured using a modified Michelson interferometer. The system achieved noise levels of $\sim200\ \text{prad}/\sqrt{\text{Hz}}$ between 0.2-30 Hz and $\sim10\ \text{prad}/\sqrt{\text{Hz}}$ above 100 Hz. Such a system can be applied to a broad range of fields from the study of rotational seismic motion and elastogravity signals to gravitational wave observation and tests of gravity.
△ Less
Submitted 20 April, 2021; v1 submitted 4 January, 2021;
originally announced January 2021.
-
Flash microwave pressing of zirconia
Authors:
Charles Manière,
Geuntak Lee,
Elisa Torresani,
John F. Gerling,
Vadim V. Yakovlev,
Darold Martin,
Eugene Olevsky
Abstract:
Microwave Pressing is a promising way to reduce microwave sintering temperatures and stabilize microwave powder materials processing. A multi-physics simulation was conducted of the regulated pressure-assisted microwave cavity. This simulation took into consideration resonance phenomena and the nonlinear temperature-dependent material parameters of zirconia. The intrinsic behaviors of microwave sy…
▽ More
Microwave Pressing is a promising way to reduce microwave sintering temperatures and stabilize microwave powder materials processing. A multi-physics simulation was conducted of the regulated pressure-assisted microwave cavity. This simulation took into consideration resonance phenomena and the nonlinear temperature-dependent material parameters of zirconia. The intrinsic behaviors of microwave systems and zirconia make the regulation of the microwave pressing difficult. However, the same phenomena can be used to activate flash sintering. Flash microwave sintering uses high electric fields of the resonant microwave profile, the Negative Temperature Behavior (NTC) of zirconia resistivity, and the mechanical pressure applied to the powder via a die compaction configuration. The resulting flash microwave pressing still needs improvement in terms of the processed material structure homogeneity, but it has the capacity to become the fastest sintering treatment as it allows room temperature activation where the total process time only takes a few seconds. In addition, this 10-20s processing technique has shown good potential for improving the transparency of alumina pre-sintered specimens.
△ Less
Submitted 21 November, 2020;
originally announced November 2020.
-
Proportional integral derivative, modeling and ways of stabilization for the spark plasma sintering process
Authors:
Charles Manière,
Geuntak Lee,
Eugene A. Olevsky
Abstract:
The stability ofthe proportional--integral--derivative (PID)controlof temperature in the spark plasma sintering (SPS) process is investigated.ThePID regulationsof this process are tested fordifferent SPS toolingdimensions, physical parameters conditions,andareas of temperature control. It isshown thatthe PID regulation quality strongly depends on the heating time lag between the a…
▽ More
The stability ofthe proportional--integral--derivative (PID)controlof temperature in the spark plasma sintering (SPS) process is investigated.ThePID regulationsof this process are tested fordifferent SPS toolingdimensions, physical parameters conditions,andareas of temperature control. It isshown thatthe PID regulation quality strongly depends on the heating time lag between the area of heat generation and the area of the temperature control. Tooling temperature rate maps arestudied to revealpotential areas forhighlyefficientPID control.The convergence of the model and experiment indicatesthat even with non-optimal initial PIDcoefficients, it is possible to reduce the temperature regulation inaccuracy to less than 4K by positioning the temperature control location in highlyresponsiveareas revealed by the finite-element calculationsof the temperature spatial distribution.
△ Less
Submitted 21 November, 2020;
originally announced November 2020.
-
Josephson-junction infrared single-photon detector
Authors:
Evan D. Walsh,
Woochan Jung,
Gil-Ho Lee,
Dmitri K. Efetov,
Bae-Ian Wu,
K. -F. Huang,
Thomas A. Ohki,
Takashi Taniguchi,
Kenji Watanabe,
Philip Kim,
Dirk Englund,
Kin Chung Fong
Abstract:
Josephson junctions (JJs) are ubiquitous superconducting devices, enabling high sensitivity magnetometers and voltage amplifiers, as well as forming the basis of high performance cryogenic computer and superconducting quantum computers. While JJ performance can be degraded by quasiparticles (QPs) formed from broken Cooper pairs, this phenomenon also opens opportunities to sensitively detect electr…
▽ More
Josephson junctions (JJs) are ubiquitous superconducting devices, enabling high sensitivity magnetometers and voltage amplifiers, as well as forming the basis of high performance cryogenic computer and superconducting quantum computers. While JJ performance can be degraded by quasiparticles (QPs) formed from broken Cooper pairs, this phenomenon also opens opportunities to sensitively detect electromagnetic radiation. Here we demonstrate single near-infrared photon detection by coupling photons to the localized surface plasmons of a graphene-based JJ. Using the photon-induced switching statistics of the current-biased JJ, we reveal the critical role of QPs generated by the absorbed photon in the detection mechanism. The photon-sensitive JJ will enable a high-speed, low-power optical interconnect for future JJ-based computing architectures.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
Super-Heavy Ions Acceleration Driven by Ultrashort Laser Pulses at Ultrahigh Intensity
Authors:
Pengjie Wang,
Zheng Gong,
Seong Geun Lee,
Yinren Shou,
Yixing Geng,
Cheonha Jeon,
I Jong Kim,
Hwang Woon Lee,
Jin Woo Yoon,
Jae Hee Sung,
Seong Ku Lee,
Defeng Kong,
Jianbo Liu,
Zhusong Mei,
Zhengxuan Cao,
Zhuo Pan,
Il Woo Choi,
Xueqing Yan,
Chang Hee Nam,
Wenjun Ma
Abstract:
The acceleration of super-heavy ions (SHIs) from plasmas driven by ultrashort (tens of femtoseconds) laser pulses is a challenging topic waiting for breakthrough. The detecting and controlling of the ionization process, and the adoption of the optimal acceleration scheme are crucial for the generation of highly energetic SHIs. Here, we report the experimental results on the generation of deeply io…
▽ More
The acceleration of super-heavy ions (SHIs) from plasmas driven by ultrashort (tens of femtoseconds) laser pulses is a challenging topic waiting for breakthrough. The detecting and controlling of the ionization process, and the adoption of the optimal acceleration scheme are crucial for the generation of highly energetic SHIs. Here, we report the experimental results on the generation of deeply ionized super-heavy ions (Au) with unprecedented energy of 1.2 GeV utilizing ultrashort laser pulses (22 fs) at the intensity of 10^22 W/cm2. A novel self-calibrated diagnostic method was developed to acquire the absolute energy spectra and charge state distributions of Au ions abundant at the charge state of 51+ and reaching up to 61+. The measured charge state distributions supported by 2D particle-in-cell simulations serves as an additional tool to inspect the ionization dynamics associated with SHI acceleration, revealing that the laser intensity is the crucial parameter for the acceleration of Au ions over the pulse duration. The use of double-layer targets results in a prolongation of the acceleration time without sacrificing the strength of acceleration field, which is highly favorable for the generation of high-energy super heavy ions.
△ Less
Submitted 15 April, 2021; v1 submitted 21 August, 2020;
originally announced August 2020.
-
Enhanced graphitic domains of unreduced graphene oxide and the interplay of hydration behaviour and catalytic activity
Authors:
Tobias Foller,
Rahman Daiyan,
Xiaoheng Jin,
Joshua Leverett,
Hangyel Kim,
Richard Webster,
Jeaniffer E. Yap,
Xinyue Wen,
Aditya Rawal,
K. Kanishka H. DeSilva,
Masamichi Yoshimura,
Heriberto Bustamante,
Shery L. Y. Chang,
Priyank Kumar,
Yi You,
Gwan Hyoung Lee,
Rose Amal,
Rakesh Joshi
Abstract:
Previous studies indicate that the properties of graphene oxide (GO) can be significantly improved by enhancing its graphitic domain size through thermal diffusion and clustering of functional groups. Remarkably, this transition takes place below the decomposition temperature of the functional groups and thus allows fine-tuning of graphitic domains without compromising with the functionality of GO…
▽ More
Previous studies indicate that the properties of graphene oxide (GO) can be significantly improved by enhancing its graphitic domain size through thermal diffusion and clustering of functional groups. Remarkably, this transition takes place below the decomposition temperature of the functional groups and thus allows fine-tuning of graphitic domains without compromising with the functionality of GO. By studying the transformation of GO under mild thermal treatment, we directly observe this size enhancement of graphitic domains from originally 40 nm2 to 200 nm2 through an extensive transmission electron microscopy (TEM) study. Additionally, we confirm the integrity of the functional groups during this process by comprehensive chemical analysis. A closer look into the process confirms the theoretically predicted relevance for the room temperature stability of GO. We further investigate the influence of enlarged graphitic domains on the hydration behaviour of GO and catalytic performance of single-atom catalysts supported by GO.
△ Less
Submitted 21 May, 2021; v1 submitted 1 July, 2020;
originally announced July 2020.
-
Parameterization and applications of the low-$Q^2$ nucleon vector form factors
Authors:
Kaushik Borah,
Richard J. Hill,
Gabriel Lee,
Oleksandr Tomalak
Abstract:
We present the proton and neutron vector form factors in a convenient parametric form that is optimized for momentum transfers $\lesssim$ few GeV$^2$. The form factors are determined from a global fit to electron scattering data and precise charge radius measurements. A new treatment of radiative corrections is applied. This parametric representation of the form factors, uncertainties and correlat…
▽ More
We present the proton and neutron vector form factors in a convenient parametric form that is optimized for momentum transfers $\lesssim$ few GeV$^2$. The form factors are determined from a global fit to electron scattering data and precise charge radius measurements. A new treatment of radiative corrections is applied. This parametric representation of the form factors, uncertainties and correlations provides an efficient means to evaluate many derived observables. We consider two classes of illustrative examples: neutrino-nucleon scattering cross sections at GeV energies for neutrino oscillation experiments and nucleon structure corrections for atomic spectroscopy. The neutrino-nucleon charged current quasielastic (CCQE) cross section differs by 3-5% compared to commonly used form factor models when the vector form factors are constrained by recent high-statistics electron-proton scattering data from the A1 Collaboration. Nucleon structure parameter determinations include: the magnetic and Zemach radii of the proton and neutron, $[r_M^p, r_M^n] = [ 0.739(41)(23), 0.776(53)(28)]$ fm and $[r_Z^p, r_Z^n] = [ 1.0227(94)(51), -0.0445(14)(3)]$ fm; the Friar radius of nucleons, $[(r^p_F)^3, (r^n_F)^3] = [2.246(58)(2), 0.0093(6)(1)]$ fm$^3$; the electric curvatures, $[\langle r^4 \rangle^p_E, \langle r^4 \rangle^n_E ] = [1.08(28)(5), -0.33(24)(3)]$ fm$^4$; and bounds on the magnetic curvatures, $[ \langle r^4 \rangle^p_M, \langle r^4 \rangle^n_M ] = [ -2.0(1.7)(0.8), -2.3(2.1)(1.1)]$ fm$^4$. The first and dominant uncertainty is propagated from the experimental data and radiative corrections, and the second error is due to the fitting procedure.
△ Less
Submitted 21 October, 2020; v1 submitted 30 March, 2020;
originally announced March 2020.
-
New Test of the Gravitational $1/r^2$ Law at Separations down to 52 $μ$m
Authors:
J. G. Lee,
E. G. Adelberger,
T. S. Cook,
S. M. Fleischer,
B. R. Heckel
Abstract:
We tested the gravitational $1/r^2$ law using a stationary torsion-balance detector and a rotating attractor containing test bodies with both 18-fold and 120-fold azimuthal symmetries that simultaneously tests the $1/r^2$ law at two different length scales. We took data at detector-attractor separations between $52~μ$m and 3.0 mm. Newtonian gravity gave an excellent fit to our data, limiting with…
▽ More
We tested the gravitational $1/r^2$ law using a stationary torsion-balance detector and a rotating attractor containing test bodies with both 18-fold and 120-fold azimuthal symmetries that simultaneously tests the $1/r^2$ law at two different length scales. We took data at detector-attractor separations between $52~μ$m and 3.0 mm. Newtonian gravity gave an excellent fit to our data, limiting with 95\% confidence any gravitational-strength Yukawa interactions to ranges $< 38.6~μ$m.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Light Yield and Uniformity Measurements of Different Scintillator Tiles with Silicon Photomultipliers
Authors:
Gerald Eigen,
Graham R. Lee
Abstract:
We present light yield and uniformity measurements of square and hexagonal tiles read out with silicon photomultipliers via a Y11 wavelength-shifting fiber or directly from the side or from the center at the top face. All tiles are 3~mm thick and have an area of $\rm 9~cm^2$. The sides are wrapped with two layers of Teflon tape while top and bottom faces are covered with two layers of Tyvec paper.…
▽ More
We present light yield and uniformity measurements of square and hexagonal tiles read out with silicon photomultipliers via a Y11 wavelength-shifting fiber or directly from the side or from the center at the top face. All tiles are 3~mm thick and have an area of $\rm 9~cm^2$. The sides are wrapped with two layers of Teflon tape while top and bottom faces are covered with two layers of Tyvec paper. We further show the first light yield and uniformity measurements of ATLAS Tile Calorimeter (TileCal) tiles with MPPC readout. This study has been motivated by looking into a possible phase 3 upgrade for the ATLAS hadron calorimeter and for hadron calorimeters at future hadron colliders.
△ Less
Submitted 15 April, 2020; v1 submitted 14 February, 2020;
originally announced February 2020.
-
Observation of Reactor Antineutrino Disappearance Using Delayed Neutron Capture on Hydrogen at RENO
Authors:
C. D. Shin,
Zohaib Atif,
G. Bak,
J. H. Choi,
H. I. Jang,
J. S. Jang,
S. H. Jeon,
K. K. Joo,
K. Ju,
D. E. Jung,
J. G. Kim,
J. Y. Kim,
S. B. Kim,
S. Y. Kim,
W. Kim,
E. Kwon,
D. H. Lee,
H. G. Lee,
Y. C. Lee,
I. T. Lim,
D. H. Moon,
M. Y. Pac,
C. Rott,
H. Seo,
J. H. Seo
, et al. (6 additional authors not shown)
Abstract:
The Reactor Experiment for Neutrino Oscillation (RENO) experiment has been taking data using two identical liquid scintillator detectors of 44.5 tons since August 2011. The experiment has observed the disappearance of reactor neutrinos in their interactions with free protons, followed by neutron capture on hydrogen. Based on 1500 live days of data taken with 16.8 GW$_{th}$ reactors at the Hanbit N…
▽ More
The Reactor Experiment for Neutrino Oscillation (RENO) experiment has been taking data using two identical liquid scintillator detectors of 44.5 tons since August 2011. The experiment has observed the disappearance of reactor neutrinos in their interactions with free protons, followed by neutron capture on hydrogen. Based on 1500 live days of data taken with 16.8 GW$_{th}$ reactors at the Hanbit Nuclear Power Plant in Korea, the near (far) detector observes 567690 (90747) electron antineutrino candidate events with a delayed neutron capture on hydrogen. This provides an independent measurement of $θ_{13}$ and a consistency check on the validity of the result from n-Gd data. Furthermore, it provides an important cross-check on the systematic uncertainties of the n-Gd measurement. Based on a rate-only analysis, we obtain sin$^{2}$2$θ_{13}$= 0.087 $\pm$ 0.008 (stat.) $\pm$ 0.014 (syst.).
△ Less
Submitted 11 November, 2019;
originally announced November 2019.
-
Deep neural network Grad-Shafranov solver constrained with measured magnetic signals
Authors:
Semin Joung,
Jaewook Kim,
Sehyun Kwak,
J. G. Bak,
S. G. Lee,
H. S. Han,
H. S. Kim,
Geunho Lee,
Daeho Kwon,
Y. -c. Ghim
Abstract:
A neural network solving Grad-Shafranov equation constrained with measured magnetic signals to reconstruct magnetic equilibria in real time is developed. Database created to optimize the neural network's free parameters contain off-line EFIT results as the output of the network from $1,118$ KSTAR experimental discharges of two different campaigns. Input data to the network constitute magnetic sign…
▽ More
A neural network solving Grad-Shafranov equation constrained with measured magnetic signals to reconstruct magnetic equilibria in real time is developed. Database created to optimize the neural network's free parameters contain off-line EFIT results as the output of the network from $1,118$ KSTAR experimental discharges of two different campaigns. Input data to the network constitute magnetic signals measured by a Rogowski coil (plasma current), magnetic pick-up coils (normal and tangential components of magnetic fields) and flux loops (poloidal magnetic fluxes). The developed neural networks fully reconstruct not only the poloidal flux function $ψ\left( R, Z\right)$ but also the toroidal current density function $j_φ\left( R, Z\right)$ with the off-line EFIT quality. To preserve robustness of the networks against a few missing input data, an imputation scheme is utilized to eliminate the required additional training sets with large number of possible combinations of the missing inputs.
△ Less
Submitted 7 November, 2019;
originally announced November 2019.
-
Charge transport layer dependent electronic band bending in perovskite solar cells and its correlation to device degradation
Authors:
Junseop Byeon,
Jutae Kim,
Ji-Young Kim,
Gunhee Lee,
Kijoon Bang,
Namyoung Ahn,
Mansoo Choi
Abstract:
Perovskite solar cells (PSCs) have shown remarkably improved power-conversion efficiency of around 25%. However, their working principle remains arguable and the stability issue has not been solved yet. In this report, we revealed that the working mechanism of PSCs is explained by a dominant pn junction occurring at the different interface depending on electron transport layer, and charges are acc…
▽ More
Perovskite solar cells (PSCs) have shown remarkably improved power-conversion efficiency of around 25%. However, their working principle remains arguable and the stability issue has not been solved yet. In this report, we revealed that the working mechanism of PSCs is explained by a dominant pn junction occurring at the different interface depending on electron transport layer, and charges are accumulated at the corresponding dominant junction initiating device degradation. Locations of a dominant pn junction, the electric field, and carrier-density distribution with respect to electron-transport layers in the PCS devices were investigated by using the electron-beam-induced current measurement and Kelvin probe force microscopy. The amount of accumulated charges in the devices was analyzed using the charge-extraction method and the degradation process of devices was confirmed by SEM measurements. From these observations, we identified that the dominant pn junction appears at the interface where the degree of band bending is higher compared to the other interface, and charges are accumulated at the corresponding junction where the device degradation is initiated, which suggests that there exists a strong correlation between PSC working principle and device degradation. We highlight that an ideal pin PSC that can minimize the degree of band bending should be designed for ensuring long-term stability, via using proper selective contacts
△ Less
Submitted 28 October, 2019;
originally announced October 2019.
-
Direct CO2 Electroreduction from Carbonate
Authors:
Yuguang C. Li,
Geonhui Lee,
Tiange Yuan,
Ying Wang,
Dae-Hyun Nam,
Ziyun Wang,
F. Pelayo García de Arquer,
Yanwei Lum,
Cao-Thang Dinh,
Oleksandr Voznyy,
Edward H. Sargent
Abstract:
The process of CO2 valorization, all the way from capture of CO2 to its electrochemical upgrade, requires significant inputs in each of the capture, upgrade, and separation steps. The gas phase CO2 feed following the capture-and-release stage and into the CO2 electroreduction stage produce a large waste of CO2, between 80 and 95% of CO2 is wasted due to carbonate formation or electrolyte crossover…
▽ More
The process of CO2 valorization, all the way from capture of CO2 to its electrochemical upgrade, requires significant inputs in each of the capture, upgrade, and separation steps. The gas phase CO2 feed following the capture-and-release stage and into the CO2 electroreduction stage produce a large waste of CO2, between 80 and 95% of CO2 is wasted due to carbonate formation or electrolyte crossover, that adds cost and energy consumption to the CO2 management aspect of the system. Here we report an electrolyzer that instead directly upgrades carbonate electrolyte from CO2 capture solution to syngas, achieving 100% carbon utilization across the system. A bipolar membrane is used to produce proton in situ, under applied potential, which facilitates CO2 releasing at the membrane:catalyst interface from the carbonate solution. Using an Ag catalyst, we generate pure syngas at a 3 to 1 H2 to CO ratio, with no CO2 dilution at the gas outlet, at a current density of 150 mA cm-2, and achieve a full cell energy efficiency of 35%. The direct carbonate cell was stable under a continuous 145 h of catalytic operation at ca. 180 mA cm-2. The work demonstrates that coupling CO2 electrolysis directly with a CO2 capture system can accelerate the path towards viable CO2 conversion technologies.
△ Less
Submitted 6 May, 2019;
originally announced May 2019.
-
Bayesian with Gaussian process based missing input imputation scheme for reconstructing magnetic equilibria in real time
Authors:
Semin Joung,
Jaewook Kim,
Sehyun Kwak,
Kyeo-reh Park,
S. H. Hahn,
H. S. Han,
H. S. Kim,
J. G. Bak,
S. G. Lee,
Y. -c. Ghim
Abstract:
A Bayesian with GP(Gaussian Process)-based numerical method to impute a few missing magnetic signals caused by impaired magnetic probes during tokamak operations is developed such that the real-time reconstruction of magnetic equilibria, whose performance strongly depends on the measured magnetic signals and their intactness, are affected minimally. Likelihood of the Bayesian model constructed wit…
▽ More
A Bayesian with GP(Gaussian Process)-based numerical method to impute a few missing magnetic signals caused by impaired magnetic probes during tokamak operations is developed such that the real-time reconstruction of magnetic equilibria, whose performance strongly depends on the measured magnetic signals and their intactness, are affected minimally. Likelihood of the Bayesian model constructed with the Maxwell's equations, specifically Gauss's law of magnetism and Ampère's law, results in infinite number of solutions if two or more magnetic signals are missing. This undesirable characteristic of the Bayesian model is remediated by coupling the model with the Gaussian process. Our proposed numerical method infers the missing magnetic signals correctly in less than $1$\:msec suitable for real-time reconstruction of magnetic equilibria during tokamak operations. The method can also be used for a neural network that reconstructs magnetic equilibria trained with a complete set of magnetic signals. Without our proposed imputation method, such a neural network would become useless if missing signals are not tolerable by the network.
△ Less
Submitted 11 June, 2018;
originally announced June 2018.
-
Optical measurements of three-dimensional microscopic temperature distributions around gold nanorods excited by surface plasmonics
Authors:
JunTaek Oh,
Gu-Haeng Lee,
Jinsung Noh,
Seungwoo Shin,
Bong Jae Lee,
Yoonkey Nam,
YongKeun Park
Abstract:
The measurement and control of the temperature in microscopic systems, which are increasingly required in diverse applications, are fundamentally important. Yet, the measurement of the three-dimensional (3D) temperature distribution in microscopic systems has not been demonstrated. Here, we propose and experimentally demonstrate the measurement of the 3D temperature distribution by exploiting the…
▽ More
The measurement and control of the temperature in microscopic systems, which are increasingly required in diverse applications, are fundamentally important. Yet, the measurement of the three-dimensional (3D) temperature distribution in microscopic systems has not been demonstrated. Here, we propose and experimentally demonstrate the measurement of the 3D temperature distribution by exploiting the temperature dependency of the refractive index (RI). Measurement of the RI distribution of water makes it possible to quantitatively obtain its 3D temperature distribution above a glass substrate coated with gold nanorods with sub-micrometer resolution, in a temperature range of 100C and with a sensitivity of 2.88C. The 3D temperature distributions that are obtained enable various thermodynamic properties including the maximum temperature, heat flux, and thermal conductivity to be extracted and analyzed quantitatively.
△ Less
Submitted 7 November, 2018; v1 submitted 2 April, 2018;
originally announced April 2018.
-
Micro-optical Tandem Luminescent Solar Concentrators
Authors:
David R. Needell,
Ognjen Ilic,
Colton R. Bukowsky,
Zach Nett,
Lu Xu,
Junwen He,
Haley Bauser,
Benjamin G. Lee,
John F. Geisz,
Ralph G. Nuzzo,
A. Paul Alivisatos,
Harry A. Atwater
Abstract:
Traditional concentrating photovoltaic (CPV) systems utilize multijunction cells to minimize thermalization losses, but cannot efficiently capture diffuse sunlight, which contributes to a high levelized cost of energy (LCOE) and limits their use to geographical regions with high direct sunlight insolation. Luminescent solar concentrators (LSCs) harness light generated by luminophores embedded in a…
▽ More
Traditional concentrating photovoltaic (CPV) systems utilize multijunction cells to minimize thermalization losses, but cannot efficiently capture diffuse sunlight, which contributes to a high levelized cost of energy (LCOE) and limits their use to geographical regions with high direct sunlight insolation. Luminescent solar concentrators (LSCs) harness light generated by luminophores embedded in a light-trapping waveguide to concentrate light onto smaller cells. LSCs can absorb both direct and diffuse sunlight, and thus can operate as flat plate receivers at a fixed tilt and with a conventional module form factor. However, current LSCs experience significant power loss through parasitic luminophore absorption and incomplete light trapping by the optical waveguide. Here we introduce a tandem LSC device architecture that overcomes both of these limitations, consisting of a PLMA polymer layer with embedded CdSe/CdS quantum dot (QD) luminophores and InGaP micro-cells, which serve as a high bandgap absorber on top of a conventional Si photovoltaic. We experimentally synthesize CdSe/CdS QDs with exceptionally high quantum-yield (99%) and ultra-narrowband emission optimally matched to fabricated III-V InGaP micro-cells. Using a Monte Carlo ray-tracing model, we show the radiative limit power conversion efficiency for a module with these components to be 30.8% diffuse sunlight conditions. These results indicate that a tandem LSC-on-Si architecture could significantly improve upon the efficiency of a conventional Si photovoltaic module with simple and straightforward alterations of the module lamination steps of a Si photovoltaic manufacturing process, with promise for widespread module deployment across diverse geographical regions and energy markets.
△ Less
Submitted 5 September, 2017;
originally announced October 2017.
-
Complete amplitude and phase control of light using broadband holographic metasurface
Authors:
Gun-Yeal Lee,
Gwanho Yoon,
Seung-Yeol Lee,
Hansik Yun,
Jaebum Cho,
Kyookeun Lee,
Hwi Kim,
Junsuk Rho,
Byoungho Lee
Abstract:
Reconstruction of light profiles with amplitude and phase information, called holography, is an attractive optical technique to display three-dimensional images. Due to essential requirements for an ideal hologram, subwavelength control of both amplitude and phase is crucial. Nevertheless, traditional holographic devices have suffered from their limited capabilities of incomplete modulation in bot…
▽ More
Reconstruction of light profiles with amplitude and phase information, called holography, is an attractive optical technique to display three-dimensional images. Due to essential requirements for an ideal hologram, subwavelength control of both amplitude and phase is crucial. Nevertheless, traditional holographic devices have suffered from their limited capabilities of incomplete modulation in both amplitude and phase of visible light. Here, we propose a novel metasurface that is capable of completely controlling both amplitude and phase profiles of visible light independently with subwavelength spatial resolution. The simultaneous, continuous, and broadband control of amplitude and phase is achieved by using X-shaped meta-atoms based on expanded concept of the Pancharatnam-Berry phase. The first experimental demonstrations of complete complex-amplitude holograms with subwavelength definition are achieved and show excellent performances with remarkable signal-to-noise ratio compared to traditional phase-only holograms. Extraordinary control capability with versatile advantages of our metasurface paves a way to an ideal holography, which is expected to be a significant advance in the field of optical holography and metasurfaces.
△ Less
Submitted 29 June, 2017;
originally announced June 2017.
-
Assembly of 3D plasmonic metamolecules by 2D AFM nanomanipulation of highly uniform and smooth gold nanospheres
Authors:
Kyung Jin Park,
Ji-Hyeok Huh,
Dae-Woong Jung,
Jin-Sung Park,
Gwan H. Choi,
Gaehang Lee,
Pil J. Yoo,
Hong-Gyu Park,
Gi-Ra Yi,
Seungwoo Lee
Abstract:
Atomic force microscopy (AFM) nanomanipulation has been viewed as a deterministic method for the assembly of plasmonic metamolecules because it enables unprecedented engineering of clusters with exquisite control over particle number and geometry. Nevertheless, the dimensionality of plasmonic metamolecules via AFM nanomanipulation is limited to 2D, so as to restrict the design space of available a…
▽ More
Atomic force microscopy (AFM) nanomanipulation has been viewed as a deterministic method for the assembly of plasmonic metamolecules because it enables unprecedented engineering of clusters with exquisite control over particle number and geometry. Nevertheless, the dimensionality of plasmonic metamolecules via AFM nanomanipulation is limited to 2D, so as to restrict the design space of available artificial electromagnetisms. Here, we show that 2D nanomanipulation of the AFM tip can be used to assemble 3D plasmonic metamolecules in a versatile and deterministic way by dribbling highly spherical and smooth gold nanospheres (NSs) on a nanohole template rather than on a flat surface. Various 3D plasmonic clusters with controlled symmetry were successfully assembled with nanometer precision, the relevant 3D plasmonic modes (i.e., artificial magnetism and magnetic-based Fano resonance) were fully rationalized by both numerical calculation and dark-field spectroscopy. This templating strategy for advancing AFM nanomanipulation can be generalized to exploit the fundamental understanding of various electromagnetic 3D couplings and can serve as the basis for the design of metamolecules, metafluids, and metamaterials.
△ Less
Submitted 25 March, 2017;
originally announced March 2017.
-
Fluorescence detection of single lithium atoms in an optical lattice using Doppler-cooling beams
Authors:
Hyok Sang Han,
Hyun Gyung Lee,
Seokchan Yoon,
Donghyun Cho
Abstract:
We demonstrate in situ fluorescence detection of $^7$Li atoms in a 1D optical lattice with single atom precision. Even though illuminated lithium atoms tend to boil out, when the lattice is deep, molasses beams without extra cooling retain the atoms while producing sufficient fluorescent photons for detection. When the depth of the potential well at an antinode is 2.4 mK, an atom remains trapped f…
▽ More
We demonstrate in situ fluorescence detection of $^7$Li atoms in a 1D optical lattice with single atom precision. Even though illuminated lithium atoms tend to boil out, when the lattice is deep, molasses beams without extra cooling retain the atoms while producing sufficient fluorescent photons for detection. When the depth of the potential well at an antinode is 2.4 mK, an atom remains trapped for 30 s while scattering probe photons at the rate of $1.7 \times 10^5$ s$^{-1}$. We propose a simple model that describes the dependence of the lifetime of an atom on well depth. When the number of trapped atoms is reduced, a clear stepwise change is observed in integrated fluorescence, indicating the detection of a single atom. At a photon-collecting efficiency of only 1.3% owing to small numerical aperture, the presence or absence of an atom is determined within 300 ms with an error of less than $5 \times 10^{-4}$.
△ Less
Submitted 21 March, 2017;
originally announced March 2017.
-
Theoretical study of asymmetric A-π-D-π-D-π-A' tribranched organic sensitizer for Dye-sensitized solar cells
Authors:
Geon Hyeong Lee,
Young Sik Kim
Abstract:
An asymmetric A-π-D-π-D-π-A' tribranched organic dye (dye1) with a cyanoacrylic acid and an indolinum carboxyl acid as electron acceptors and a triphenylamine as an electron donor was designed and theoretically investigated for dye-sensitized solar cells (DSSCs). Dye1 was compared to reference well-known dyes with single electron acceptors (D5 and JYL-SQ6). Density functional theory and time-depen…
▽ More
An asymmetric A-π-D-π-D-π-A' tribranched organic dye (dye1) with a cyanoacrylic acid and an indolinum carboxyl acid as electron acceptors and a triphenylamine as an electron donor was designed and theoretically investigated for dye-sensitized solar cells (DSSCs). Dye1 was compared to reference well-known dyes with single electron acceptors (D5 and JYL-SQ6). Density functional theory and time-dependent density functional theory calculations were used to estimate the photovoltaic properties of the dyes. Due to the different lowest unoccupied molecular orbital levels of each acceptor and the energy antenna of the dual electron donor (D-π-D), the absorption spectrum of each branch displayed different shapes. Considering the overall properties, the asymmetric A-π-D-π-D-π-A' tribranched organic dye exhibited high conversion efficiency performance for DSSCs. The findings of this work suggest that optimizing the branch of electron donors and acceptors in dye sensitizers based on asymmetric A-π-D-π-D-π-A' tribranched organic dye produces good photovoltaic properties for DSSCs.
△ Less
Submitted 20 May, 2016;
originally announced May 2016.
-
High-efficiency diphenylsulfon derivatives-based organic light-emitting diode exhibiting thermally activated delayed fluorescence
Authors:
Geon Hyeong Lee,
Young Sik Kim
Abstract:
Novel thermally activated delayed fluorescence (TADF) material with diphenyl sulfone (DPS) as an electron acceptor and 3,6-dimethoxycarbazole (DMOC) and 1,3,6,8-Tetramethyl-9H-carbazole (TMC) as electron donors were investigated theoretically for a blue organic light emitting diode (OLED) emitter. We calculate the energies of the first singlet (S1) and first triplet (T1)-excited states of TADF mat…
▽ More
Novel thermally activated delayed fluorescence (TADF) material with diphenyl sulfone (DPS) as an electron acceptor and 3,6-dimethoxycarbazole (DMOC) and 1,3,6,8-Tetramethyl-9H-carbazole (TMC) as electron donors were investigated theoretically for a blue organic light emitting diode (OLED) emitter. We calculate the energies of the first singlet (S1) and first triplet (T1)-excited states of TADF materials by performing density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations on the ground state using a dependence on charge transfer amounts for the optimal Hartree-Fock percentage in the exchange-correlation of TD-DFT. The calculated ΔEST values of TMC-DPS (0.094 eV) was smaller than DMOC-DPS (0.386 eV) because of the large dihedral angles between the donor and accepter moieties. We show that TMC-DPS would have a suitable blue OLED emitter, because it has a large dihedral angle that creates a small spatial overlap between the HOMO and the LUMO and, consequently, the small ΔEST and the emission wavelength of 2.82 eV (439.9 nm).
△ Less
Submitted 20 May, 2016;
originally announced May 2016.
-
The mineral clouds on HD 209458b and HD189733b
Authors:
Ch. Helling,
G. Lee,
I. Dobbs-Dixon,
N. Mayne,
D. S. Amundsen,
J. Khaimova,
A. A. Unger,
J. Manners,
D. Acreman,
C. Smith
Abstract:
3D atmosphere model results are used to comparatively study the kinetic, non-equilibrium cloud formation in the atmospheres of two example planets guided by the giant gas planets HD209458b and HD189733b. Rather independently of hydrodynamic model differences, our cloud modelling suggests that both planets are covered in mineral clouds throughout the entire modelling domain. Both planets harbour ch…
▽ More
3D atmosphere model results are used to comparatively study the kinetic, non-equilibrium cloud formation in the atmospheres of two example planets guided by the giant gas planets HD209458b and HD189733b. Rather independently of hydrodynamic model differences, our cloud modelling suggests that both planets are covered in mineral clouds throughout the entire modelling domain. Both planets harbour chemically complex clouds that are made of mineral particles that have a height-dependent material composition and size. The remaining gas-phase element abundances strongly effects the molecular abundances of the atmosphere in the cloud forming regions. Hydrocarbon and cyanopolyyne molecules can be rather abundant in the inner, dense part of the atmospheres of HD189733b and HD209458b. No one value for metallicity and the C/O ratio can be used to describe an extrasolar planet. Our results concerning the presence and location of water in relation to the clouds explain some of the observed differences between the two planets. In HD189733b, strong water features have been reported while such features appear less strong for HD209458b. By considering the location of the clouds in the two atmospheres, we see that obscuring clouds exist high in the atmosphere of HD209458b, but much deeper in HD189733b. We further conclude that the (self-imposed) degeneracy of cloud parameters in retrieval methods can only be lifted if the cloud formation processes are accurately modelled in contrast to prescribing them by independent parameters.
△ Less
Submitted 23 March, 2016; v1 submitted 13 March, 2016;
originally announced March 2016.
-
Role of explosive instabilities in high-$β$ disruptions in tokamaks
Authors:
A. Y. Aydemir,
H. H. Lee,
S. G. Lee,
J. Seol,
B. H. Park,
Y. K. In
Abstract:
Intrinsically explosive growth of a ballooning finger is demonstrated in nonlinear magnetohydrodynamic calculations of high-$β$ disruptions in tokamaks. The explosive finger is formed by an ideally unstable n=1 mode, dominated by an m/n=2/1 component. The quadrupole geometry of the 2/1 perturbed pressure field provides a generic mechanism for the formation of the initial ballooning finger and its…
▽ More
Intrinsically explosive growth of a ballooning finger is demonstrated in nonlinear magnetohydrodynamic calculations of high-$β$ disruptions in tokamaks. The explosive finger is formed by an ideally unstable n=1 mode, dominated by an m/n=2/1 component. The quadrupole geometry of the 2/1 perturbed pressure field provides a generic mechanism for the formation of the initial ballooning finger and its subsequent transition from exponential to explosive growth, without relying on secondary processes. The explosive ejection of the hot plasma from the core and stochastization of the magnetic field occur in Alfvénic time scales, accounting for the extremely fast growth of the precursor oscillations and the rapidity of the thermal quench in some high-$β$ disruptions.
△ Less
Submitted 3 March, 2016;
originally announced March 2016.
-
Reality Mining with Mobile Big Data: Understanding the Impact of Network Structure on Propagation Dynamics
Authors:
Yuanfang Chen,
Noel Crespi,
Gyu Myoung Lee
Abstract:
Information and epidemic propagation dynamics in complex networks is truly important to discover and control terrorist attack and disease spread. How to track, recognize and model such dynamics is a big challenge. With the popularity of intellectualization and the rapid development of Internet of Things (IoT), massive mobile data is automatically collected by millions of wireless devices (e.g., sm…
▽ More
Information and epidemic propagation dynamics in complex networks is truly important to discover and control terrorist attack and disease spread. How to track, recognize and model such dynamics is a big challenge. With the popularity of intellectualization and the rapid development of Internet of Things (IoT), massive mobile data is automatically collected by millions of wireless devices (e.g., smart phone and tablet). In this article, as a typical use case, the impact of network structure on epidemic propagation dynamics is investigated by using the mobile data collected from the smart phones carried by the volunteers of Ebola outbreak areas. On this basis, we propose a model to recognize the dynamic structure of a network. Then, we introduce and discuss the open issues and future work for developing the proposed recognition model.
△ Less
Submitted 16 December, 2015;
originally announced December 2015.
-
Long-lived neutral-kaon flux measurement for the KOTO experiment
Authors:
T. Masuda,
J. K. Ahn,
S. Banno,
M. Campbell,
J. Comfort,
Y. T. Duh,
T. Hineno,
Y. B. Hsiung,
T. Inagaki,
E. Iwai,
N. Kawasaki,
E. J. Kim,
Y. J. Kim,
J. W. Ko,
T. K. Komatsubara,
A. S. Kurilin,
G. H. Lee,
J. W. Lee,
S. K. Lee,
G. Y. Lim,
J. Ma,
D. MacFarland,
Y. Maeda,
T. Matsumura,
R. Murayama
, et al. (32 additional authors not shown)
Abstract:
The KOTO ($K^0$ at Tokai) experiment aims to observe the CP-violating rare decay $K_L \rightarrow π^0 ν\barν$ by using a long-lived neutral-kaon beam produced by the 30 GeV proton beam at the Japan Proton Accelerator Research Complex. The $K_L$ flux is an essential parameter for the measurement of the branching fraction. Three $K_L$ neutral decay modes, $K_L \rightarrow 3π^0$,…
▽ More
The KOTO ($K^0$ at Tokai) experiment aims to observe the CP-violating rare decay $K_L \rightarrow π^0 ν\barν$ by using a long-lived neutral-kaon beam produced by the 30 GeV proton beam at the Japan Proton Accelerator Research Complex. The $K_L$ flux is an essential parameter for the measurement of the branching fraction. Three $K_L$ neutral decay modes, $K_L \rightarrow 3π^0$, $K_L \rightarrow 2π^0$, and $K_L \rightarrow 2γ$ were used to measure the $K_L$ flux in the beam line in the 2013 KOTO engineering run. A Monte Carlo simulation was used to estimate the detector acceptance for these decays. Agreement was found between the simulation model and the experimental data, and the remaining systematic uncertainty was estimated at the 1.4\% level. The $K_L$ flux was measured as $(4.183 \pm 0.017_{\mathrm{stat.}} \pm 0.059_{\mathrm{sys.}}) \times 10^7$ $K_L$ per $2\times 10^{14}$ protons on a 66-mm-long Au target.
△ Less
Submitted 7 January, 2016; v1 submitted 11 September, 2015;
originally announced September 2015.
-
Short-range spin-dependent interactions of electrons: a probe for exotic pseudo-Goldstone bosons
Authors:
W. A. Terrano,
E. G. Adelberger,
J. G. Lee,
B. R. Heckel
Abstract:
We used a torsion pendulum and rotating attractor with 20-pole electron-spin distributions to probe dipole-dipole interactions mediated by exotic pseudo-Goldstone bosons with $m_{\rm b}\leq 500 \; μ$eV and coupling strengths up to 14 orders of magnitude weaker than electromagnetism. This corresponds to symmetry-breaking scales $F \leq 70$ TeV, the highest reached in any laboratory experiment. We u…
▽ More
We used a torsion pendulum and rotating attractor with 20-pole electron-spin distributions to probe dipole-dipole interactions mediated by exotic pseudo-Goldstone bosons with $m_{\rm b}\leq 500 \; μ$eV and coupling strengths up to 14 orders of magnitude weaker than electromagnetism. This corresponds to symmetry-breaking scales $F \leq 70$ TeV, the highest reached in any laboratory experiment. We used an attractor with a 20-pole unpolarized mass distribution to improve laboratory bounds on $CP$-violating monopole-dipole interactions with $1.5\:μ$eV$<m_{\rm b}<400\:μ$eV by a factor of up to 1000.
△ Less
Submitted 10 August, 2015;
originally announced August 2015.
-
Extraction of the proton radius from electron-proton scattering data
Authors:
Gabriel Lee,
John R. Arrington,
Richard J. Hill
Abstract:
We perform a new analysis of electron-proton scattering data to determine the proton electric and magnetic radii, enforcing model-independent constraints from form factor analyticity. A wide-ranging study of possible systematic effects is performed. An improved analysis is developed that rebins data taken at identical kinematic settings, and avoids a scaling assumption of systematic errors with st…
▽ More
We perform a new analysis of electron-proton scattering data to determine the proton electric and magnetic radii, enforcing model-independent constraints from form factor analyticity. A wide-ranging study of possible systematic effects is performed. An improved analysis is developed that rebins data taken at identical kinematic settings, and avoids a scaling assumption of systematic errors with statistical errors. Employing standard models for radiative corrections, our improved analysis of the 2010 Mainz A1 Collaboration data yields a proton electric radius $r_E = 0.895(20)$ fm and magnetic radius $r_M = 0.776(38)$ fm. A similar analysis applied to world data (excluding Mainz data) implies $r_E = 0.916(24)$ fm and $r_M = 0.914(35)$ fm. The Mainz and world values of the charge radius are consistent, and a simple combination yields a value $r_E = 0.904(15)$ fm that is $4σ$ larger than the CREMA Collaboration muonic hydrogen determination. The Mainz and world values of the magnetic radius differ by $2.7σ$, and a simple average yields $r_M= 0.851(26)$ fm. The circumstances under which published muonic hydrogen and electron scattering data could be reconciled are discussed, including a possible deficiency in the standard radiative correction model which requires further analysis.
△ Less
Submitted 28 July, 2015; v1 submitted 6 May, 2015;
originally announced May 2015.