-
Photon noise correlations in millimeter-wave telescopes
Authors:
Charles A. Hill,
Akito Kusaka
Abstract:
Many modern millimeter and submillimeter (``mm-wave'') telescopes for astronomy are deploying more detectors by increasing detector pixel density, and with the rise of lithographed detector architectures and high-throughput readout techniques, it is becoming increasingly practical to overfill the focal plane. However, when the pixel pitch $p_{\rm pix}$ is small compared to the product of the wavel…
▽ More
Many modern millimeter and submillimeter (``mm-wave'') telescopes for astronomy are deploying more detectors by increasing detector pixel density, and with the rise of lithographed detector architectures and high-throughput readout techniques, it is becoming increasingly practical to overfill the focal plane. However, when the pixel pitch $p_{\rm pix}$ is small compared to the product of the wavelength $λ$ and the focal ratio $F$, or $p_{\mathrm{pix}} \lesssim 1.2 F λ$, the Bose term of the photon noise correlates between neighboring detector pixels due to the Hanbury Brown & Twiss (HBT) effect. When this HBT effect is non-negligible, the array-averaged sensitivity scales with detector count $N_{\mathrm{det}}$ less favorably than the uncorrelated limit of $N_{\mathrm{det}}^{-1/2}$. In this paper, we present a general prescription to calculate this HBT correlation based on a quantum optics formalism and extend it to polarization-sensitive detectors. We then estimate the impact of HBT correlations on the sensitivity of a model mm-wave telescope and discuss the implications for focal-plane design.
△ Less
Submitted 3 September, 2023;
originally announced September 2023.
-
Precipitable water vapour measurement using GNSS data in the Atacama Desert for millimetre and submillimetre astronomical observations
Authors:
Junna Sugiyama,
Haruki Nishino,
Akito Kusaka
Abstract:
Precipitable water vapour (PWV) strongly affects the quality of data obtained from millimetre- and submillimetre-wave astronomical observations, such as those for cosmic microwave background measurements. Some of these observatories have used radiometers to monitor PWV. In this study, PWV was measured from 2021 April to 2022 April using Global Navigation Satellite System (GNSS) instruments in the…
▽ More
Precipitable water vapour (PWV) strongly affects the quality of data obtained from millimetre- and submillimetre-wave astronomical observations, such as those for cosmic microwave background measurements. Some of these observatories have used radiometers to monitor PWV. In this study, PWV was measured from 2021 April to 2022 April using Global Navigation Satellite System (GNSS) instruments in the Atacama Desert, Chile, where several millimetre- and submillimetre-wave telescopes are located. We evaluated the accuracy of these measurements by comparing them to radiometer measurements. We calculated the PWV from GNSS data using CSRS-PPP (Canadian Spatial Reference System Precise Point Positioning), an online software package. When using GNSS data alone, the estimated PWV showed a systematic offset of +1.08 mm. When combining GNSS data with data from a barometer, which was co-located with the GNSS receiver, the estimated PWV showed a lower systematic offset of -0.05 mm. The GNSS PWV showed a statistical uncertainty of 0.52 mm with an averaging time of an hour. Compared to other PWV measurement methods, GNSS instruments are robust in bad weather conditions, have sufficient time resolution, and are less expensive. By demonstrating good accuracy and precision in low-PWV conditions, this paper shows that GNSS instruments are valuable tools for PWV measurements for observing site evaluation and data analysis for ground-based telescopes.
△ Less
Submitted 14 February, 2024; v1 submitted 24 August, 2023;
originally announced August 2023.
-
The Simons Observatory: Design and Measured Performance of a Carbon Fiber Strut for a Cryogenic Truss
Authors:
Kevin D. Crowley,
Peter Dow,
Jordan E. Shroyer,
John C. Groh,
Bradley Dober,
Jacob Spisak,
Nicholas Galitzki,
Tanay Bhandarkar,
Mark J. Devlin,
Simon Dicker,
Patricio A. Gallardo,
Kathleen Harrington,
Bradley R. Johnson,
Delwin Johnson,
Anna M. Kofman,
Akito Kusaka,
Adrian Lee,
Michele Limon,
Jeffrey Iuliano,
Federico Nati,
John Orlowski-Scherer,
Lyman Page,
Michael Randall,
Grant Teply,
Tran Tsan
, et al. (3 additional authors not shown)
Abstract:
We present the design and measured performance of a new carbon fiber strut design that is used in a cryogenically cooled truss for the Simons Observatory Small Aperture Telescope (SAT). The truss consists of two aluminum 6061 rings separated by 24 struts. Each strut consists of a central carbon fiber tube fitted with two aluminum end caps. We tested the performance of the strut and truss by (i) cr…
▽ More
We present the design and measured performance of a new carbon fiber strut design that is used in a cryogenically cooled truss for the Simons Observatory Small Aperture Telescope (SAT). The truss consists of two aluminum 6061 rings separated by 24 struts. Each strut consists of a central carbon fiber tube fitted with two aluminum end caps. We tested the performance of the strut and truss by (i) cryogenically cycling and destructively pull-testing strut samples, (ii) non-destructively pull-testing the final truss, and (iii) measuring the thermal conductivity of the carbon fiber tubes. We found that the strut strength is limited by the mounting fasteners and the strut end caps, not the epoxy adhesive or the carbon fiber tube. This result is consistent with our numerical predictions. Our thermal measurements suggest that the conductive heat load through the struts (from 4 K to 1 K) will be less than 1 mW. This strut design may be a promising candidate for use in other cryogenic support structures.
△ Less
Submitted 18 January, 2022; v1 submitted 16 January, 2022;
originally announced January 2022.
-
GA-guided mD-VcMD: A genetic-algorithm-based method for multi-dimensional virtual-system coupled molecular dynamics
Authors:
Junichi Higo,
Ayumi Kusaka,
Kota Kasahara,
Narutoshi Kamiya,
Ikuo Fukuda,
Kentaro Mori,
Yutaka Hata,
Yoshifumi Fukunishi
Abstract:
We previously introduced a conformational sampling method, a multi-dimensional virtual-system coupled molecular dynamics (mD-VcMD), to enhance conformational sampling of a biomolecular system by computer simulations. Here, we present a new sampling method, subzone-based mD-VcMD, as an extension of mD-VcMD. Then, we further extend the subzone-based method using genetic algorithm (GA), and named it…
▽ More
We previously introduced a conformational sampling method, a multi-dimensional virtual-system coupled molecular dynamics (mD-VcMD), to enhance conformational sampling of a biomolecular system by computer simulations. Here, we present a new sampling method, subzone-based mD-VcMD, as an extension of mD-VcMD. Then, we further extend the subzone-based method using genetic algorithm (GA), and named it the GA-based mD-VcMD. Because the conformational space of the biomolecular system is vast, a single simulation cannot sample the conformational space throughout. Then, iterative simulations are performed to increase the sampled region gradually. The new methods have the following advantages: (1) The methods are free from a production run: I.e., all snapshots from all iterations can be used for analyses. (2) The methods are free from fine tuning of a weight function (probability distribution function or potential of mean force). (3) A simple procedure is available to assign a thermodynamic weight to snapshots sampled in spite that the weight function is not used to proceed the iterative simulations. Thus, a canonical ensemble (i.e., a thermally equilibrated ensemble) is generated from the resultant snapshots. (4) If a poorly-sampled region emerges in sampling, selective sampling can be performed focusing on the poorly-sampled region without breaking the proportion of the canonical ensemble. A free-energy landscape of the biomolecular system is obtainable from the canonical ensemble.
△ Less
Submitted 13 August, 2020; v1 submitted 12 June, 2020;
originally announced June 2020.
-
Simons Observatory Microwave SQUID Multiplexing Readout -- Cryogenic RF Amplifier and Coaxial Chain Design
Authors:
Mayuri Sathyanarayana Rao,
Maximiliano Silva-Feaver,
Aamir Ali,
Kam Arnold,
Peter Ashton,
Bradley J. Dober,
Cody J. Duell,
Shannon M. Duff,
Nicholas Galitzki,
Erin Healy,
Shawn Henderson,
Shuay-Pwu Patty Ho,
Jonathan Hoh,
Anna M. Kofman,
Akito Kusaka,
Adrian T. Lee,
Aashrita Mangu,
Justin Mathewson,
Philip Mauskopf,
Heather McCarrick,
Jenna Moore,
Michael D. Niemack,
Christopher Raum,
Maria Salatino,
Trevor Sasse
, et al. (11 additional authors not shown)
Abstract:
The Simons Observatory (SO) is an upcoming polarization-sensitive Cosmic Microwave Background (CMB) experiment on the Cerro Toco Plateau (Chile) with large overlap with other optical and infrared surveys (e.g., DESI, LSST, HSC). To enable the readout of \bigO(10,000) detectors in each of the four telescopes of SO, we will employ the microwave SQUID multiplexing technology. With a targeted multiple…
▽ More
The Simons Observatory (SO) is an upcoming polarization-sensitive Cosmic Microwave Background (CMB) experiment on the Cerro Toco Plateau (Chile) with large overlap with other optical and infrared surveys (e.g., DESI, LSST, HSC). To enable the readout of \bigO(10,000) detectors in each of the four telescopes of SO, we will employ the microwave SQUID multiplexing technology. With a targeted multiplexing factor of \bigO{(1,000)}, microwave SQUID multiplexing has never been deployed on the scale needed for SO. Here we present the design of the cryogenic coaxial cable and RF component chain that connects room temperature readout electronics to superconducting resonators that are coupled to Transition Edge Sensor bolometers operating at sub-Kelvin temperatures. We describe design considerations including cryogenic RF component selection, system linearity, noise, and thermal power dissipation.
△ Less
Submitted 19 March, 2020;
originally announced March 2020.
-
Measurements of tropospheric ice clouds with a ground-based CMB polarization experiment, POLARBEAR
Authors:
Satoru Takakura,
Mario A. O. Aguilar-Faúndez,
Yoshiki Akiba,
Kam Arnold,
Carlo Baccigalupi,
Darcy Barron,
Dominic Beck,
Federico Bianchini,
David Boettger,
Julian Borrill,
Kolen Cheung,
Yuji Chinone,
Tucker Elleflot,
Josquin Errard,
Giulio Fabbian,
Chang Feng,
Neil Goeckner-Wald,
Takaho Hamada,
Masaya Hasegawa,
Masashi Hazumi,
Logan Howe,
Daisuke Kaneko,
Nobuhiko Katayama,
Brian Keating,
Reijo Keskitalo
, et al. (23 additional authors not shown)
Abstract:
The polarization of the atmosphere has been a long-standing concern for ground-based experiments targeting cosmic microwave background (CMB) polarization. Ice crystals in upper tropospheric clouds scatter thermal radiation from the ground and produce a horizontally-polarized signal. We report the detailed analysis of the cloud signal using a ground-based CMB experiment, POLARBEAR, located at the A…
▽ More
The polarization of the atmosphere has been a long-standing concern for ground-based experiments targeting cosmic microwave background (CMB) polarization. Ice crystals in upper tropospheric clouds scatter thermal radiation from the ground and produce a horizontally-polarized signal. We report the detailed analysis of the cloud signal using a ground-based CMB experiment, POLARBEAR, located at the Atacama desert in Chile and observing at 150 GHz. We observe horizontally-polarized temporal increases of low-frequency fluctuations ("polarized bursts," hereafter) of $\lesssim$0.1 K when clouds appear in a webcam monitoring the telescope and the sky. The hypothesis of no correlation between polarized bursts and clouds is rejected with $>$24$σ$ statistical significance using three years of data. We consider many other possibilities including instrumental and environmental effects, and find no other reasons other than clouds that can explain the data better. We also discuss the impact of the cloud polarization on future ground-based CMB polarization experiments.
△ Less
Submitted 18 September, 2018;
originally announced September 2018.
-
Studies of Systematic Uncertainties for Simons Observatory: Optical Effects and Sensitivity Considerations
Authors:
Patricio A. Gallardo,
Jon Gudmundsson,
Brian J. Koopman,
Frederick T. Matsuda,
Sara M. Simon,
Aamir Ali,
Sean Bryan,
Yuji Chinone,
Gabriele Coppi,
Nicholas Cothard,
Mark J. Devlin,
Simon Dicker,
Giulio Fabbian,
Nicholas Galitzki,
Charles A. Hill,
Brian Keating,
Akito Kusaka,
Jacob Lashner,
Adrian T. Lee,
Michele Limon,
Philip D. Mauskopf,
Jeff McMahon,
Federico Nati,
Michael D. Niemack,
John L. Orlowski-Scherer
, et al. (10 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work i…
▽ More
The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work is part of a series of papers studying calibration, sensitivity, and systematic errors for SO. In this paper, we discuss current efforts to model optical systematic effects, how these have been used to guide the design of the SO instrument, and how these studies can be used to inform instrument design of future experiments like CMB-S4. While optical systematics studies are underway for both the small aperture and large aperture telescopes, we limit the focus of this paper to the more mature large aperture telescope design for which our studies include: pointing errors, optical distortions, beam ellipticity, cross-polar response, instrumental polarization rotation and various forms of sidelobe pickup.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
Quantum Sensing for High Energy Physics
Authors:
Zeeshan Ahmed,
Yuri Alexeev,
Giorgio Apollinari,
Asimina Arvanitaki,
David Awschalom,
Karl K. Berggren,
Karl Van Bibber,
Przemyslaw Bienias,
Geoffrey Bodwin,
Malcolm Boshier,
Daniel Bowring,
Davide Braga,
Karen Byrum,
Gustavo Cancelo,
Gianpaolo Carosi,
Tom Cecil,
Clarence Chang,
Mattia Checchin,
Sergei Chekanov,
Aaron Chou,
Aashish Clerk,
Ian Cloet,
Michael Crisler,
Marcel Demarteau,
Ranjan Dharmapalan
, et al. (91 additional authors not shown)
Abstract:
Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics.
Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics.
△ Less
Submitted 29 March, 2018;
originally announced March 2018.
-
Performance of a continuously rotating half-wave plate on the POLARBEAR telescope
Authors:
Satoru Takakura,
Mario Aguilar,
Yoshiki Akiba,
Kam Arnold,
Carlo Baccigalupi,
Darcy Barron,
Shawn Beckman,
David Boettger,
Julian Borrill,
Scott Chapman,
Yuji Chinone,
Ari Cukierman,
Anne Ducout,
Tucker Elleflot,
Josquin Errard,
Giulio Fabbian,
Takuro Fujino,
Nicholas Galitzki,
Neil Goeckner-Wald,
Nils W. Halverson,
Masaya Hasegawa,
Kaori Hattori,
Masashi Hazumi,
Charles Hill,
Logan Howe
, et al. (28 additional authors not shown)
Abstract:
A continuously rotating half-wave plate (CRHWP) is a promising tool to improve the sensitivity to large angular scales in cosmic microwave background (CMB) polarization measurements. With a CRHWP, single detectors can measure three of the Stokes parameters, $I$, $Q$ and $U$, thereby avoiding the set of systematic errors that can be introduced by mismatches in the properties of orthogonal detector…
▽ More
A continuously rotating half-wave plate (CRHWP) is a promising tool to improve the sensitivity to large angular scales in cosmic microwave background (CMB) polarization measurements. With a CRHWP, single detectors can measure three of the Stokes parameters, $I$, $Q$ and $U$, thereby avoiding the set of systematic errors that can be introduced by mismatches in the properties of orthogonal detector pairs. We focus on the implementation of CRHWPs in large aperture telescopes (i.e. the primary mirror is larger than the current maximum half-wave plate diameter of $\sim$0.5 m), where the CRHWP can be placed between the primary mirror and focal plane. In this configuration, one needs to address the intensity to polarization ($I{\rightarrow}P$) leakage of the optics, which becomes a source of 1/f noise and also causes differential gain systematics that arise from CMB temperature fluctuations. In this paper, we present the performance of a CRHWP installed in the POLARBEAR experiment, which employs a Gregorian telescope with a 2.5 m primary illumination pattern. The CRHWP is placed near the prime focus between the primary and secondary mirrors. We find that the $I{\rightarrow}P$ leakage is larger than the expectation from the physical properties of our primary mirror, resulting in a 1/f knee of 100 mHz. The excess leakage could be due to imperfections in the detector system, i.e. detector non-linearity in the responsivity and time-constant. We demonstrate, however, that by subtracting the leakage correlated with the intensity signal, the 1/f noise knee frequency is reduced to 32 mHz ($\ell \sim$39 for our scan strategy), which is very promising to probe the primordial B-mode signal. We also discuss methods for further noise subtraction in future projects where the precise temperature control of instrumental components and the leakage reduction will play a key role.
△ Less
Submitted 27 May, 2017; v1 submitted 23 February, 2017;
originally announced February 2017.
-
Development of readout electronics for POLARBEAR-2 Cosmic Microwave Background experiment
Authors:
K. Hattori,
Y. Akiba,
K. Arnold,
D. Barron,
A. N. Bender,
A. Cukierman,
T. de Haan,
M. Dobbs,
T. Elleflot,
M. Hasegawa,
M. Hazumi,
W. Holzapfel,
Y. Hori,
B. Keating,
A. Kusaka,
A. Lee,
J. Montgomery,
K. Rotermund,
I. Shirley,
A. Suzuki,
N. Whitehorn
Abstract:
The readout of transition-edge sensor (TES) bolometers with a large multiplexing factor is key for the next generation Cosmic Microwave Background (CMB) experiment, Polarbear-2, having 7,588 TES bolometers. To enable the large arrays, we have been developing a readout system with a multiplexing factor of 40 in the frequency domain. Extending that architecture to 40 bolometers requires an increase…
▽ More
The readout of transition-edge sensor (TES) bolometers with a large multiplexing factor is key for the next generation Cosmic Microwave Background (CMB) experiment, Polarbear-2, having 7,588 TES bolometers. To enable the large arrays, we have been developing a readout system with a multiplexing factor of 40 in the frequency domain. Extending that architecture to 40 bolometers requires an increase in the bandwidth of the SQUID electronics above 4 MHz. This paper focuses on cryogenic readout and shows how it affects cross talk and the responsivity of the TES bolometers. A series resistance, such as equivalent series resistance (ESR) of capacitors for LC filters, leads to non-linear response of the bolometers. A wiring inductance modulates a voltage across the bolometers and causes cross talk. They should be controlled well to reduce systematic errors in CMB observations. We have been developing a cryogenic readout with a low series impedance and have tuned bolometers in the middle of their transition at a high frequency (> 3 MHz).
△ Less
Submitted 23 December, 2015;
originally announced December 2015.
-
Angular and Polarization Response of Multimode Sensors with Resistive-Grid Absorbers
Authors:
Akito Kusaka,
Edward J. Wollack,
Thomas R. Stevenson
Abstract:
High sensitivity receiver systems with near ideal polarization sensitivity are highly desirable for development of millimeter and sub-millimeter radio astronomy. Multimoded bolometers provide a unique solution to achieve such sensitivity, for which hundreds of single-mode sensors would otherwise be required. The primary concern in employing such multimoded sensors for polarimetery is the control o…
▽ More
High sensitivity receiver systems with near ideal polarization sensitivity are highly desirable for development of millimeter and sub-millimeter radio astronomy. Multimoded bolometers provide a unique solution to achieve such sensitivity, for which hundreds of single-mode sensors would otherwise be required. The primary concern in employing such multimoded sensors for polarimetery is the control of the polarization systematics. In this paper, we examine the angular- and polarization- dependent absorption pattern of a thin resistive grid or membrane, which models an absorber used for a multimoded bolometer. The result shows that a freestanding thin resistive absorber with a surface resistivity of η/2, where η is the impedance of free space, attains a beam pattern with equal E- and H-plane responses, leading to zero cross polarization. For a resistive-grid absorber, the condition is met when a pair of grids is positioned orthogonal to each other and both have a resistivity of η/2. When a reflective backshort termination is employed to improve absorption efficiency, the cross-polar level can be suppressed below -30 dB if acceptance angle of the sensor is limited to <60degrees. The small cross-polar systematics have even-parity patterns and do not contaminate the measurements of odd-parity polarization patterns, for which many of recent instruments for cosmic microwave background are designed. Underlying symmetry that suppresses these cross-polar systematics is discussed in detail. The estimates and formalism provided in this paper offer key tools in the design consideration of the instruments using the multimoded polarimeters.
△ Less
Submitted 8 January, 2014;
originally announced January 2014.
-
Unphysical Gauge Fixing in Higgs Mechanism
Authors:
T. Fujita,
A. Kusaka,
K. Tsuda,
S. Oshima
Abstract:
The unitary gauge in the Higgs mechanism is to impose the condition of $φ=φ^\dagger $ on the Higgs fields. However, this is not the gauge fixing but simply a procedure for producing the massive vector boson fields by hand. The Lagrangian density of the weak interactions should be reconsidered by starting from the massive vector boson fields which couple to the fermion currents as the initial ing…
▽ More
The unitary gauge in the Higgs mechanism is to impose the condition of $φ=φ^\dagger $ on the Higgs fields. However, this is not the gauge fixing but simply a procedure for producing the massive vector boson fields by hand. The Lagrangian density of the weak interactions should be reconsidered by starting from the massive vector boson fields which couple to the fermion currents as the initial ingredients.
△ Less
Submitted 18 June, 2008;
originally announced June 2008.
-
Detectors and flux instrumentation for future neutrino facilities
Authors:
T. Abe,
H. Aihara,
C. Andreopoulos,
A. Ankowski,
A. Badertscher,
G. Battistoni,
A. Blondel,
J. Bouchez,
A. Bross,
A. Bueno,
L. Camilleri,
J. E. Campagne,
A. Cazes,
A. Cervera-Villanueva,
G. De Lellis,
F. Di Capua,
M. Ellis,
A. Ereditato,
L. S. Esposito,
C. Fukushima,
E. Gschwendtner,
J. J. Gomez-Cadenas,
M. Iwasaki,
K. Kaneyuki,
Y. Karadzhov
, et al. (44 additional authors not shown)
Abstract:
This report summarises the conclusions from the detector group of the International Scoping Study of a future Neutrino Factory and Super-Beam neutrino facility. The baseline detector options for each possible neutrino beam are defined as follows:
1. A very massive (Megaton) water Cherenkov detector is the baseline option for a sub-GeV Beta Beam and Super Beam facility.
2. There are a number…
▽ More
This report summarises the conclusions from the detector group of the International Scoping Study of a future Neutrino Factory and Super-Beam neutrino facility. The baseline detector options for each possible neutrino beam are defined as follows:
1. A very massive (Megaton) water Cherenkov detector is the baseline option for a sub-GeV Beta Beam and Super Beam facility.
2. There are a number of possibilities for either a Beta Beam or Super Beam (SB) medium energy facility between 1-5 GeV. These include a totally active scintillating detector (TASD), a liquid argon TPC or a water Cherenkov detector.
3. A 100 kton magnetized iron neutrino detector (MIND) is the baseline to detect the wrong sign muon final states (golden channel) at a high energy (20-50 GeV) neutrino factory from muon decay. A 10 kton hybrid neutrino magnetic emulsion cloud chamber detector for wrong sign tau detection (silver channel) is a possible complement to MIND, if one needs to resolve degeneracies that appear in the $δ$-$θ_{13}$ parameter space.
△ Less
Submitted 26 December, 2007;
originally announced December 2007.
-
Mistery of Real Scalar Klein-Gordon Field
Authors:
T. Fujita,
S. Kanamaki,
A. Kusaka,
S. Oshima
Abstract:
The mystery that the real scalar Klein-Gordon field has vanishing current densities is resolved. The scalar field is shown to be a complex field due to the condition of possessing a proper non-relativistic limit. Like the Schrödinger field, one component complex Klein-Gordon field corresponds to a boson with one flavor, and therefore there exists no physical real scalar field. As a good example,…
▽ More
The mystery that the real scalar Klein-Gordon field has vanishing current densities is resolved. The scalar field is shown to be a complex field due to the condition of possessing a proper non-relativistic limit. Like the Schrödinger field, one component complex Klein-Gordon field corresponds to a boson with one flavor, and therefore there exists no physical real scalar field. As a good example, we present the Schwinger model Hamiltonian which is naturally described by the complex scalar field with one flavor. The non-existence of the real scalar field indicates that the Higgs mechanism should be reconsidered.
△ Less
Submitted 30 October, 2006;
originally announced October 2006.
