Showing 1–50 of 274 results for author: Kim, M

DUNE Phase II: Scientific Opportunities, Detector Concepts, Technological Solutions

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1347 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the European Strategy for Particle Physics. While the construction of the DUNE Phase I is well underway, this White Paper focuses on DUNE Phase II planning. DUNE Phase-II consists of a third and fourth far detector (FD) module, an upgraded near detector complex, and an enhanced 2.1 MW beam. The fourth FD module is conceived as a "Module of Opportunity", aimed at expanding the physics opportunities, in addition to supporting the core DUNE science program, with more advanced technologies. This document highlights the increased science opportunities offered by the DUNE Phase II near and far detectors, including long-baseline neutrino oscillation physics, neutrino astrophysics, and physics beyond the standard model. It describes the DUNE Phase II near and far detector technologies and detector design concepts that are currently under consideration. A summary of key R&D goals and prototyping phases needed to realize the Phase II detector technical designs is also provided. DUNE's Phase II detectors, along with the increased beam power, will complete the full scope of DUNE, enabling a multi-decadal program of groundbreaking science with neutrinos. △ Less

Submitted 22 August, 2024; originally announced August 2024.

Report number: FERMILAB-TM-2833-LBNF

Harmonized connectome resampling for variance in voxel sizes

Authors: Elyssa M. McMaster, Nancy R. Newlin, Gaurav Rudravaram, Adam M. Saunders, Aravind R. Krishnan, Lucas W. Remedios, Michael E. Kim, Hanliang Xu, Derek B. Archer, Kurt G. Schilling, François Rheault, Laurie E. Cutting, Bennett A. Landman

Abstract: To date, there has been no comprehensive study characterizing the effect of diffusion-weighted magnetic resonance imaging voxel resolution on the resulting connectome for high resolution subject data. Similarity in results improved with higher resolution, even after initial down-sampling. To ensure robust tractography and connectomes, resample data to 1 mm isotropic resolution. To date, there has been no comprehensive study characterizing the effect of diffusion-weighted magnetic resonance imaging voxel resolution on the resulting connectome for high resolution subject data. Similarity in results improved with higher resolution, even after initial down-sampling. To ensure robust tractography and connectomes, resample data to 1 mm isotropic resolution. △ Less

Submitted 2 August, 2024; originally announced August 2024.

First Measurement of the Total Inelastic Cross-Section of Positively-Charged Kaons on Argon at Energies Between 5.0 and 7.5 GeV

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1341 additional authors not shown)

Abstract: ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each… ▽ More ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380$\pm$26 mbarns for the 6 GeV/$c$ setting and 379$\pm$35 mbarns for the 7 GeV/$c$ setting. △ Less

Submitted 1 August, 2024; originally announced August 2024.

Report number: CERN-EP-2024-211, FERMILAB-PUB-24-0216-V

Anomalous Water Penetration in $\text{Al}^{3+}$ Dissolution

Authors: Minwoo Kim, Seungtae Kim, Changbong Hyeon, Ji Woon Yu, Siyoung Q. Choi, Won Bo Lee

Abstract: The physicochemical characterization of trivalent ions is limited due to a lack of accurate force fields. By leveraging the latest machine learning force field to model aqueous $\text{AlCl}_{3}$, we discover that upon dissolution of $\text{Al}^{3+}$, water molecules beyond the second hydration shell involve in the hydration process. A combination of scissoring of coordinating water is followed by… ▽ More The physicochemical characterization of trivalent ions is limited due to a lack of accurate force fields. By leveraging the latest machine learning force field to model aqueous $\text{AlCl}_{3}$, we discover that upon dissolution of $\text{Al}^{3+}$, water molecules beyond the second hydration shell involve in the hydration process. A combination of scissoring of coordinating water is followed by synchronized secondary motion of water in the second solvation shell due to hydrogen bonding. Consequently, the water beyond the second solvation penetrates through the second solvation shell and coordinates to the $\text{Al}^{3+}$. Our study reveals a novel microscopic understanding of solvation dynamics for trivalent ion. △ Less

Submitted 23 July, 2024; originally announced July 2024.

Comments: 15 pages, 4 figures

Development of MMC-based lithium molybdate cryogenic calorimeters for AMoRE-II

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, H. Bae, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, S. Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Y. M. Gavrilyuk, A. M. Gezhaev , et al. (84 additional authors not shown)

Abstract: The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is und… ▽ More The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is under construction.This paper discusses the baseline design and characterization of the lithium molybdate cryogenic calorimeters to be used in the AMoRE-II detector modules. The results from prototype setups that incorporate new housing structures and two different crystal masses (316 g and 517 - 521 g), operated at 10 mK temperature, show energy resolutions (FWHM) of 7.55 - 8.82 keV at the 2.615 MeV $^{208}$Tl $γ$ line, and effective light detection of 0.79 - 0.96 keV/MeV. The simultaneous heat and light detection enables clear separation of alpha particles with a discrimination power of 12.37 - 19.50 at the energy region around $^6$Li(n, $α$)$^3$H with Q-value = 4.785 MeV. Promising detector performances were demonstrated at temperatures as high as 30 mK, which relaxes the temperature constraints for operating the large AMoRE-II array. △ Less

Submitted 16 July, 2024; originally announced July 2024.

Median Mishaps between Chirality and Spin-Orbit Torques via Asymmetric Hysteresis

Authors: Minhwan Kim, Duck-Ho Kim

Abstract: Averaged observations of physical phenomena have been utilized for comprehending specific occurrences in nature; however, these may overlook the crucial characteristics of individual events, thereby leading to diverse conclusions. For example, individual wave occurrences such as superposition and interference yield markedly divergent outcomes when viewed in detail. Similarly, this study enhances t… ▽ More Averaged observations of physical phenomena have been utilized for comprehending specific occurrences in nature; however, these may overlook the crucial characteristics of individual events, thereby leading to diverse conclusions. For example, individual wave occurrences such as superposition and interference yield markedly divergent outcomes when viewed in detail. Similarly, this study enhances the comprehensive framework of spin-orbit torque (SOT) within the hysteresis loop shift measurement by employing the average of effective magnetic fields arising from two distinct magnetic reversals. This approach facilitates the presentation of a physically descriptive SOT model, previously characterized only by single chirality qualitatively. By integrating this model with established measurement methodologies and theoretical paradigms, we advance a theoretical framework based on the magnetic domain-wall chirality of individual polarizations and aim to elucidate the phenomena of SOT with clarity. The anticipated outcomes include the rectification of inaccuracies in widely employed measurement methodologies and the enhancement of our comprehension of the fundamental physics, which are expected to propel advancements in next-generation spintronics materials and devices. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Comments: 24 pages, 5 figures

Projected background and sensitivity of AMoRE-II

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, Seonho Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Y. M. Gavrilyuk, A. M. Gezhaev, O. Gileva , et al. (81 additional authors not shown)

Abstract: AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap… ▽ More AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study. △ Less

Submitted 13 June, 2024; originally announced June 2024.

High-precision and low-depth eigenstate property estimation: theory and resource estimation

Authors: Jinzhao Sun, Pei Zeng, Tom Gur, M. S. Kim

Abstract: Estimating the eigenstate properties of quantum many-body systems is a long-standing, challenging problem for both classical and quantum computing. For the task of eigenstate preparation, quantum signal processing (QSP) has established near-optimal query complexity $O( Δ^{-1} \log(ε^{-1}) )$ by querying the block encoding of the Hamiltonian $H$ where $Δ$ is the energy gap and $ε$ is the target pre… ▽ More Estimating the eigenstate properties of quantum many-body systems is a long-standing, challenging problem for both classical and quantum computing. For the task of eigenstate preparation, quantum signal processing (QSP) has established near-optimal query complexity $O( Δ^{-1} \log(ε^{-1}) )$ by querying the block encoding of the Hamiltonian $H$ where $Δ$ is the energy gap and $ε$ is the target precision. However, QSP is challenging for both near-term noisy quantum computers and early fault-tolerant quantum computers (FTQC), which are limited by the number of logical qubits and circuit depth. To date, early FTQC algorithms have focused on querying the perfect time evolution $e^{-iHt}$. It remains uncertain whether early FTQC algorithms can maintain good asymptotic scaling at the gate level. Moreover, when considering qubit connectivity, the circuit depth of existing FTQC algorithms may scale suboptimally with system size. Here, we present a full-stack design of a random sampling algorithm for estimating the eigenenergy and the observable expectations on the eigenstates, which can achieve high precision and good system size scaling. The gate complexity has a logarithmic dependence on precision $ {O}(\log^{1+o(1)} (1/ε))$ for generic Hamiltonians, which cannot achieved by methods using Trottersiation to realise $e^{-iHt}$ like in QETU. For $n$-qubit lattice Hamiltonians, our method achieves near-optimal system size dependence with the gate complexity $O(n^{1+o(1)})$. When restricting the qubit connectivity to a linear nearest-neighbour architecture, The method shows advantages in circuit depth, with $O(n^{o(1)})$ for lattice models and $O(n^{2+o(1)})$ for electronic structure problems. We compare the resource requirements (CNOT gates, T gates and qubit numbers) by phase estimation, QSP, and QETU, in lattice and molecular problems. △ Less

Submitted 6 June, 2024; originally announced June 2024.

Comments: 48 pages, 7 figures, and 4 tables

Leveraging Off-the-Shelf Silicon Chips for Quantum Computing

Authors: John Michniewicz, M. S. Kim

Abstract: There is a growing demand for quantum computing across various sectors, including finance, materials and studying chemical reactions. A promising implementation involves semiconductor qubits utilizing quantum dots within transistors. While academic research labs currently produce their own devices, scaling this process is challenging, requires expertise, and results in devices of varying quality.… ▽ More There is a growing demand for quantum computing across various sectors, including finance, materials and studying chemical reactions. A promising implementation involves semiconductor qubits utilizing quantum dots within transistors. While academic research labs currently produce their own devices, scaling this process is challenging, requires expertise, and results in devices of varying quality. Some initiatives are exploring the use of commercial transistors, offering scalability, improved quality, affordability, and accessibility for researchers. This paper delves into potential realizations and the feasibility of employing off-the-shelf commercial devices for qubits. It addresses challenges such as noise, coherence, limited customizability in large industrial fabs, and scalability issues. The exploration includes discussions on potential manufacturing approaches for early versions of small qubit chips. The use of state-of-the-art transistors as hosts for quantum dots, incorporating readout techniques based on charge sensing or reflectometry, and methods like electron shuttling for qubit connectivity are examined. Additionally, more advanced designs, including 2D arrays and crossbar or DRAM-like access arrays, are considered for the path toward accessible quantum computing. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Influence of spectra sewing on XCT measurement

Authors: A. J. Arikkat, K. A. Janulewicz, C. M. Kim, P. Wachulak

Abstract: The paper presents an analysis of the possible spectra manipulation and its consequence for the specific application of XCT. The focus was on the modification of the registered spectra dominantly by the sewing/stitching method. A model spectrum was created to analyse the possible behaviour of the spectral components when specifically arranged. The model and processing of real experimental data rev… ▽ More The paper presents an analysis of the possible spectra manipulation and its consequence for the specific application of XCT. The focus was on the modification of the registered spectra dominantly by the sewing/stitching method. A model spectrum was created to analyse the possible behaviour of the spectral components when specifically arranged. The model and processing of real experimental data revealed that careful spectral sewing can be a very useful procedure and typically leads to improvement of the results obtained with the XCT technique. The results recommended also cautiousness in the choice of the applied modification and scale. In some cases gain or spectral enhancement of a part of the spectrum can be considered also as a sort of sewing, and improve the XCT results. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Comments: 9 pages, 5 figures, 19 references

Implicit degree bias in the link prediction task

Authors: Rachith Aiyappa, Xin Wang, Munjung Kim, Ozgur Can Seckin, Jisung Yoon, Yong-Yeol Ahn, Sadamori Kojaku

Abstract: Link prediction -- a task of distinguishing actual hidden edges from random unconnected node pairs -- is one of the quintessential tasks in graph machine learning. Despite being widely accepted as a universal benchmark and a downstream task for representation learning, the validity of the link prediction benchmark itself has been rarely questioned. Here, we show that the common edge sampling proce… ▽ More Link prediction -- a task of distinguishing actual hidden edges from random unconnected node pairs -- is one of the quintessential tasks in graph machine learning. Despite being widely accepted as a universal benchmark and a downstream task for representation learning, the validity of the link prediction benchmark itself has been rarely questioned. Here, we show that the common edge sampling procedure in the link prediction task has an implicit bias toward high-degree nodes and produces a highly skewed evaluation that favors methods overly dependent on node degree, to the extent that a ``null'' link prediction method based solely on node degree can yield nearly optimal performance. We propose a degree-corrected link prediction task that offers a more reasonable assessment that aligns better with the performance in the recommendation task. Finally, we demonstrate that the degree-corrected benchmark can more effectively train graph machine-learning models by reducing overfitting to node degrees and facilitating the learning of relevant structures in graphs. △ Less

Submitted 29 May, 2024; v1 submitted 23 May, 2024; originally announced May 2024.

Comments: 13 pages, 3 figures

Highest Fusion Performance without Harmful Edge Energy Bursts in Tokamak

Authors: SangKyeun Kim, Ricardo Shousha, SeongMoo Yang, Qiming Hu, SangHee Hahn, Azarakhsh Jalalvand, Jong-Kyu Park, Nikolas Christopher Logan, Andrew Oakleigh Nelson, Yong-Su Na, Raffi Nazikian, Robert Wilcox, Rongjie Hong, Terry Rhodes, Carlos Paz-Soldan, YoungMu Jeon, MinWoo Kim, WongHa Ko, JongHa Lee, Alexander Battey, Alessandro Bortolon, Joseph Snipes, Egemen Kolemen

Abstract: The path of tokamak fusion and ITER is maintaining high-performance plasma to produce sufficient fusion power. This effort is hindered by the transient energy burst arising from the instabilities at the boundary of high-confinement plasmas. The application of 3D magnetic perturbations is the method in ITER and possibly in future fusion power plants to suppress this instability and avoid energy bus… ▽ More The path of tokamak fusion and ITER is maintaining high-performance plasma to produce sufficient fusion power. This effort is hindered by the transient energy burst arising from the instabilities at the boundary of high-confinement plasmas. The application of 3D magnetic perturbations is the method in ITER and possibly in future fusion power plants to suppress this instability and avoid energy busts damaging the device. Unfortunately, the conventional use of the 3D field in tokamaks typically leads to degraded fusion performance and an increased risk of other plasma instabilities, two severe issues for reactor implementation. In this work, we present an innovative 3D field optimization, exploiting machine learning, real-time adaptability, and multi-device capabilities to overcome these limitations. This integrated scheme is successfully deployed on DIII-D and KSTAR tokamaks, consistently achieving reactor-relevant core confinement and the highest fusion performance without triggering damaging instabilities or bursts while demonstrating ITER-relevant automated 3D optimization for the first time. This is enabled both by advances in the physics understanding of self-organized transport in the plasma edge and by advances in machine-learning technology, which is used to optimize the 3D field spectrum for automated management of a volatile and complex system. These findings establish real-time adaptive 3D field optimization as a crucial tool for ITER and future reactors to maximize fusion performance while simultaneously minimizing damage to machine components. △ Less

Submitted 8 May, 2024; originally announced May 2024.

Mapping Phonon Polaritons with Visible Light

Authors: Kiernan E. Arledge, Chase T. Ellis, Nazli Rasouli Sarabi, Vincent R. Whiteside, Chul Soo Kim, Mijin Kim, Daniel C. Ratchford, Michael A Meeker, Binbin Weng, Joseph G. Tischler

Abstract: Phonon polaritons (PhPs) are hybrid photon-phonon waves which enable strong light-matter interactions and subdiffractional confinement, potentially empowering applications in sensing, nonlinear optics and nanoscale energy manipulation. In this work, we use confocal Raman microscopy to investigate the coupling between bulk phonon modes and localized surface phonon polariton (SPhP) modes in indium p… ▽ More Phonon polaritons (PhPs) are hybrid photon-phonon waves which enable strong light-matter interactions and subdiffractional confinement, potentially empowering applications in sensing, nonlinear optics and nanoscale energy manipulation. In this work, we use confocal Raman microscopy to investigate the coupling between bulk phonon modes and localized surface phonon polariton (SPhP) modes in indium phosphide (InP) nanopillars and 4H-silicon carbide (4H-SiC) gratings. The Raman intensity within the nanostructures is described in terms of the SPhP eigenmodes and used to reconstruct the field intensity, providing a method to map SPhP eigenmodes using visible and near-IR light. Our results indicate that, contrary to expectation, all Raman-active bulk phonon modes of InP and 4H-SiC couple to the localized SPhP modes. Further, we confirm that polarizability selection rules form the predominant coupling mechanism between phonons and SPhP modes, with electron-phonon coupling playing a role for certain phonon modes (A1(LO) and E1(TO) in 4H-SiC). These observations provide a method for extending Raman studies of PhP modes to achieve full 3D reconstruction of the PhP eigenmodes and visualize light-matter interactions within nanostructures, thus advancing Raman scattering as a technique for understanding PhP modes. △ Less

Submitted 21 April, 2024; originally announced April 2024.

Multiphoton super-resolution imaging via virtual structured illumination

Authors: Sumin Lim, Sungsam Kang, Jin-Hee Hong, Youngho Jin, Kalpak Gupta, Moonseok Kim, Suhyun Kim, Wonshik Choi, Seokchan Yoon

Abstract: Fluorescence imaging in thick biological tissues is challenging due to sample-induced aberration and scattering, which leads to severe degradation of image quality and resolution. Fluorescence imaging in reflection geometry further exacerbates this issue since the point spread function is distorted in both excitation and emission pathways. Here, we propose a novel approach termed adaptive optics v… ▽ More Fluorescence imaging in thick biological tissues is challenging due to sample-induced aberration and scattering, which leads to severe degradation of image quality and resolution. Fluorescence imaging in reflection geometry further exacerbates this issue since the point spread function is distorted in both excitation and emission pathways. Here, we propose a novel approach termed adaptive optics virtual structured illumination microscopy (AO V-SIM) that enables super-resolution multiphoton imaging through a scattering medium in reflection geometry. Our approach exploits the incoherent reflection matrix obtained using a conventional point-scanning fluorescence microscope with an array detector. We introduce V-SIM super-resolution reconstruction algorithm based on the incoherent reflection matrix. Furthermore, we introduce a software adaptive optics correction algorithm, AO V-SIM, which recovers unattenuated and phase-corrected optical transfer function for both excitation and emission pathways. The effectiveness of our proposed method is experimentally validated through sub-diffraction-limited two-photon fluorescence imaging of various samples in the presence of strong aberration. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Topological rainbow trapping and broadband piezoelectric energy harvesting of acoustic waves in gradient phononic crystals with coupled interfaces

Authors: Xiao-Lei Tang, Tian-Xue Ma, Miso Kim, Yue-Sheng Wang

Abstract: Topological phononic crystals (PCs) offer a novel approach to control the behavior of acoustic or elastic waves. In this paper, we design the gradient PC structures with coupled interfaces to realize topological rainbow trapping and broadband acoustic energy harvesting. Based on the geometric symmetry of PC unit cells, we construct the coupled topological interfaces by amalgamating two PCs with di… ▽ More Topological phononic crystals (PCs) offer a novel approach to control the behavior of acoustic or elastic waves. In this paper, we design the gradient PC structures with coupled interfaces to realize topological rainbow trapping and broadband acoustic energy harvesting. Based on the geometric symmetry of PC unit cells, we construct the coupled topological interfaces by amalgamating two PCs with distinct topological phases. Also, the gradient modulation of structural parameters along the coupled interfaces is employed for the generation of rainbow trapping. Subsequently, a polyvinylidene fluoride (PVDF) film is mounted along the coupled interfaces of the gradient PC structures, facilitating the conversion of acoustic energy into electrical energy. The numerical and experimental results show that the acoustic waves at different frequencies stop and are amplified at different positions of the coupled interfaces. Compared with the harvester in a bare structure, the topological PC energy harvester significantly enhances the output power at different excited frequencies. In the experiments, the maximum amplification ratio of the output power reaches 91. Besides, it is demonstrated that the topological rainbow trapping of acoustic waves exhibits robustness against random structural disorders. Notably, the coupled interfaces have broadband and multi-mode features, which are promising for other applications such as selective filtering and sensing enhancement. △ Less

Submitted 14 April, 2024; originally announced April 2024.

Atomic magnetometry using a metasurface polarizing beamsplitter in silicon on sapphire

Authors: Xuting Yang, Pritha Mukherjee, Minjeong Kim, Hongyan Mei, Chengyu Fang, Soyeon Choi, Yuhan Tong, Sarah Perlowski, David A. Czaplewski, Alan M. Dibos, Mikhail A. Kats, Jennifer T. Choy

Abstract: We demonstrate atomic magnetometry using a metasurface polarizing beamsplitter fabricated on a silicon-on-sapphire (SOS) platform. The metasurface splits a beam that is near-resonant with the rubidium atoms (795 nm) into orthogonal linear polarizations, enabling measurement of magnetically sensitive circular birefringence in a rubidium vapor through balanced polarimetry. We incorporated the metasu… ▽ More We demonstrate atomic magnetometry using a metasurface polarizing beamsplitter fabricated on a silicon-on-sapphire (SOS) platform. The metasurface splits a beam that is near-resonant with the rubidium atoms (795 nm) into orthogonal linear polarizations, enabling measurement of magnetically sensitive circular birefringence in a rubidium vapor through balanced polarimetry. We incorporated the metasurface into an atomic magnetometer based on nonlinear magneto-optical rotation and measured sub-nanotesla sensitivity, which is limited by low-frequency technical noise and transmission loss through the metasurface. To our knowledge, this work represents the first demonstration of SOS nanophotonics for atom-based sensing and paves the way for highly integrated, miniaturized atomic sensors with enhanced sensitivity and portability. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Optical Atomic Clock Interrogation Via an Integrated Spiral Cavity Laser

Authors: William Loh, David Reens, Dave Kharas, Alkesh Sumant, Connor Belanger, Ryan T. Maxson, Alexander Medeiros, William Setzer, Dodd Gray, Kyle DeBry, Colin D. Bruzewicz, Jason Plant, John Liddell, Gavin N. West, Sagar Doshi, Matthew Roychowdhury, May Kim, Danielle Braje, Paul W. Juodawlkis, John Chiaverini, Robert McConnell

Abstract: Optical atomic clocks have demonstrated revolutionary advances in precision timekeeping, but their applicability to the real world is critically dependent on whether such clocks can operate outside a laboratory setting. The challenge to clock portability stems from the many obstacles not only in miniaturizing the underlying components of the clock $-$ namely the ultrastable laser, the frequency co… ▽ More Optical atomic clocks have demonstrated revolutionary advances in precision timekeeping, but their applicability to the real world is critically dependent on whether such clocks can operate outside a laboratory setting. The challenge to clock portability stems from the many obstacles not only in miniaturizing the underlying components of the clock $-$ namely the ultrastable laser, the frequency comb, and the atomic reference itself $-$ but also in making the clock resilient to environmental fluctuations. Photonic integration offers one compelling solution to simultaneously address the problems of miniaturization and ruggedization, but brings with it a new set of challenges in recreating the functionality of an optical clock using chip-scale building blocks. The clock laser used for atom interrogation is one particular point of uncertainty, as the performance of the meticulously-engineered bulk-cavity stabilized lasers would be exceptionally difficult to transfer to chip. Here we demonstrate that a chip-integrated ultrahigh quality factor (Q) spiral cavity, when interfaced with a 1348 nm seed laser, reaches a fractional frequency instability of $7.5 \times 10^{-14}$, meeting the stability requirements for interrogating the narrow-linewidth transition of $^{88}$Sr$^+$ upon frequency doubling to 674 nm. In addition to achieving the record for laser stability on chip, we use this laser to showcase the operation of a Sr-ion clock with short-term instability averaging down as $3.9 \times 10^{-14} / \sqrtτ$, where $τ$ is the averaging time. Our demonstration of an optical atomic clock interrogated by an integrated spiral cavity laser opens the door for future advanced clock systems to be entirely constructed using lightweight, portable, and mass-manufacturable integrated optics and electronics. △ Less

Submitted 19 March, 2024; originally announced March 2024.

Operational Space and Plasma Performance with an RMP-ELM Suppressed Edge

Authors: C. Paz-Soldan, S. Gu, N. Leuthold, P. Lunia, P. Xie, M. W. Kim, S. K. Kim, N. C. Logan, J. -K. Park, W. Suttrop, Y. Sun, D. B. Weisberg, M. Willensdorfer, the ASDEX-Upgrade, DIII-D, EAST, KSTAR Teams

Abstract: The operational space and global performance of plasmas with edge-localized modes (ELMs) suppressed by resonant magnetic perturbations (RMPs) are surveyed by comparing AUG, DIII-D, EAST, and KSTAR stationary operating points. RMP-ELM suppression is achieved over a range of plasma currents, toroidal fields, and RMP toroidal mode numbers. Consistent operational windows in edge safety factor are foun… ▽ More The operational space and global performance of plasmas with edge-localized modes (ELMs) suppressed by resonant magnetic perturbations (RMPs) are surveyed by comparing AUG, DIII-D, EAST, and KSTAR stationary operating points. RMP-ELM suppression is achieved over a range of plasma currents, toroidal fields, and RMP toroidal mode numbers. Consistent operational windows in edge safety factor are found across devices, while windows in plasma shaping parameters are distinct. Accessed pedestal parameters reveal a quantitatively similar pedestal-top density limit for RMP-ELM suppression in all devices of just over 3x1019 m-3. This is surprising given the wide variance of many engineering parameters and edge collisionalities, and poses a challenge to extrapolation of the regime. Wide ranges in input power, confinement time, and stored energy are observed, with the achieved triple product found to scale like the product of current, field, and radius. Observed energy confinement scaling with engineering parameters for RMP-ELM suppressed plasmas are presented and compared with expectations from established H and L-mode scalings, including treatment of uncertainty analysis. Different scaling exponents for individual engineering parameters are found as compared to the established scalings. However, extrapolation to next-step tokamaks ITER and SPARC find overall consistency within uncertainties with the established scalings, finding no obvious performance penalty when extrapolating from the assembled multi-device RMP-ELM suppressed database. Overall this work identifies common physics for RMP-ELM suppression and highlights the need to pursue this no-ELM regime at higher magnetic field and different plasma physical size. △ Less

Submitted 6 March, 2024; originally announced March 2024.

Comments: 22 pages, 11 figures

Narrowband THz Emission from a Plasma Oscillator Imbedded in a Plasma Density Gradient

Authors: Manoj Kumar, Bernhard Ersfeld, Jaeho Lee, Dohyun Park, Seungyun Kim, Inhyuk Nam, Minseok Kim, Seongjin Jeon, Dino A. Jaroszynski, Hyyong Suk, Min Sup Hur

Abstract: A novel method is presented for generating radiation using the beat wave associated with a bi-frequency laser pulse, to excite plasma oscillations in a plasma slab with a density gradient. By resonantly exciting a plasma wave, it can be localised and transformed into a plasma oscillator that produces a beam of radially polarised terahertz radiation. Particle-in-cell simulations and analytic theory… ▽ More A novel method is presented for generating radiation using the beat wave associated with a bi-frequency laser pulse, to excite plasma oscillations in a plasma slab with a density gradient. By resonantly exciting a plasma wave, it can be localised and transformed into a plasma oscillator that produces a beam of radially polarised terahertz radiation. Particle-in-cell simulations and analytic theory are used to demonstrate its main characteristics, which includes narrow bandwidth. The radiator should have useful applications such as terahertz-band particle accelerators and pump-probe experiments. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Deep learning-enhanced paper-based vertical flow assay for high-sensitivity troponin detection using nanoparticle amplification

Authors: Gyeo-Re Han, Artem Goncharov, Merve Eryilmaz, Hyou-Arm Joung, Rajesh Ghosh, Geon Yim, Nicole Chang, Minsoo Kim, Kevin Ngo, Marcell Veszpremi, Kun Liao, Omai B. Garner, Dino Di Carlo, Aydogan Ozcan

Abstract: Successful integration of point-of-care testing (POCT) into clinical settings requires improved assay sensitivity and precision to match laboratory standards. Here, we show how innovations in amplified biosensing, imaging, and data processing, coupled with deep learning, can help improve POCT. To demonstrate the performance of our approach, we present a rapid and cost-effective paper-based high-se… ▽ More Successful integration of point-of-care testing (POCT) into clinical settings requires improved assay sensitivity and precision to match laboratory standards. Here, we show how innovations in amplified biosensing, imaging, and data processing, coupled with deep learning, can help improve POCT. To demonstrate the performance of our approach, we present a rapid and cost-effective paper-based high-sensitivity vertical flow assay (hs-VFA) for quantitative measurement of cardiac troponin I (cTnI), a biomarker widely used for measuring acute cardiac damage and assessing cardiovascular risk. The hs-VFA includes a colorimetric paper-based sensor, a portable reader with time-lapse imaging, and computational algorithms for digital assay validation and outlier detection. Operating at the level of a rapid at-home test, the hs-VFA enabled the accurate quantification of cTnI using 50 uL of serum within 15 min per test and achieved a detection limit of 0.2 pg/mL, enabled by gold ion amplification chemistry and time-lapse imaging. It also achieved high precision with a coefficient of variation of < 7% and a very large dynamic range, covering cTnI concentrations over six orders of magnitude, up to 100 ng/mL, satisfying clinical requirements. In blinded testing, this computational hs-VFA platform accurately quantified cTnI levels in patient samples and showed a strong correlation with the ground truth values obtained by a benchtop clinical analyzer. This nanoparticle amplification-based computational hs-VFA platform can democratize access to high-sensitivity point-of-care diagnostics and provide a cost-effective alternative to laboratory-based biomarker testing. △ Less

Submitted 17 February, 2024; originally announced February 2024.

Comments: 23 Pages, 4 Figures, 1 Table

Shortest-path percolation on random networks

Authors: Minsuk Kim, Filippo Radicchi

Abstract: We propose a bond-percolation model intended to describe the consumption, and eventual exhaustion, of resources in transport networks. Edges forming minimum-length paths connecting demanded origin-destination nodes are removed if below a certain budget. As pairs of nodes are demanded and edges are removed, the macroscopic connected component of the graph disappears, i.e., the graph undergoes a per… ▽ More We propose a bond-percolation model intended to describe the consumption, and eventual exhaustion, of resources in transport networks. Edges forming minimum-length paths connecting demanded origin-destination nodes are removed if below a certain budget. As pairs of nodes are demanded and edges are removed, the macroscopic connected component of the graph disappears, i.e., the graph undergoes a percolation transition. Here, we study such a shortest-path-percolation transition in homogeneous random graphs where pairs of demanded origin-destination nodes are randomly generated, and fully characterize it by means of finite-size scaling analysis. If budget is finite, the transition is identical to the one of ordinary percolation, where a single giant cluster shrinks as edges are removed from the graph; for infinite budget, the transition becomes more abrupt than the one of ordinary percolation, being characterized by the sudden fragmentation of the giant connected component into a multitude of clusters of similar size. △ Less

Submitted 29 July, 2024; v1 submitted 9 February, 2024; originally announced February 2024.

Comments: 5 pages, 5 figures, 1 table + Supplemental Material

Journal ref: Phys. Rev. Lett. 133, 047402 (2024)

Breaking 1.7V open circuit voltage in large area transparent perovskite solar cells using bulk and interfaces passivation

Authors: Fabio Matteocci, Diego Di Girolamo, Guillame Vidon, Jessica Barichello, Francesco Di Giacomo, Farshad Jafarzadeh, Barbara Paci, Amanda Generosi, Minjin Kim, Luigi Angelo Castriotta, Mathieu Frégnaux, Jean-François Guillemoles, Philip Schulz, Daniel Ory, Stefania Cacovich, Aldo Di Carlo

Abstract: Efficient semi-transparent solar cells can trigger the adoption of building integrated photovoltaics. Halide perovskites are particularly suitable in this respect owing to their tunable bandgap. Main drawbacks in the development of transparent perovskite solar cells are the high Voc deficit and the difficulties in depositing thin films over large area substrates, given the low solubility of bromid… ▽ More Efficient semi-transparent solar cells can trigger the adoption of building integrated photovoltaics. Halide perovskites are particularly suitable in this respect owing to their tunable bandgap. Main drawbacks in the development of transparent perovskite solar cells are the high Voc deficit and the difficulties in depositing thin films over large area substrates, given the low solubility of bromide and chloride precursors. In this work, we develop a 2D and passivation strategies for the high band-gap Br perovskite able to reduce charge recombination and consequently improving the open-circuit voltage. We demonstrate 1cm 2 perovskite solar cells with Voc up to 1.73 V (1.83 eV QFLS) and a PCE of 8.2%. The AVT exceeds 70% by means of a bifacial light management and a record light utilization efficiency of 5.72 is achieved, setting a new standard for transparent photovoltaics. Moreover, we show the high ceiling of our technology towards IoT application due to a bifaciality factor of 87% along with 17% PCE under indoor lighting. Finally, the up-scaling has been demonstrated fabricating 20cm 2 -active area modules with PCE of 7.3% and Voc per cell up to 1.65V. △ Less

Submitted 31 January, 2024; originally announced January 2024.

A Rydberg-atom approach to the integer factorization problem

Authors: Juyoung Park, Seokho Jeong, Minhyuk Kim, Kangheun Kim, Andrew Byun, Louis Vignoli, Louis-Paul Henry, Loïc Henriet, Jaewook Ahn

Abstract: The task of factoring integers poses a significant challenge in modern cryptography, and quantum computing holds the potential to efficiently address this problem compared to classical algorithms. Thus, it is crucial to develop quantum computing algorithms to address this problem. This study introduces a quantum approach that utilizes Rydberg atoms to tackle the factorization problem. Experimental… ▽ More The task of factoring integers poses a significant challenge in modern cryptography, and quantum computing holds the potential to efficiently address this problem compared to classical algorithms. Thus, it is crucial to develop quantum computing algorithms to address this problem. This study introduces a quantum approach that utilizes Rydberg atoms to tackle the factorization problem. Experimental demonstrations are conducted for the factorization of small composite numbers such as $6 = 2 \times 3$, $15 = 3 \times 5$, and $35 = 5 \times 7$. This approach involves employing Rydberg-atom graphs to algorithmically program binary multiplication tables, yielding many-body ground states that represent superpositions of factoring solutions. Subsequently, these states are probed using quantum adiabatic computing. Limitations of this method are discussed, specifically addressing the scalability of current Rydberg quantum computing for the intricate computational problem. △ Less

Submitted 31 January, 2024; v1 submitted 14 December, 2023; originally announced December 2023.

Comments: 12 pages, 5 figures

Quantum Computing Dataset of Maximum Independent Set Problem on King's Lattice of over Hundred Rydberg Atoms

Authors: Kangheun Kim, Minhyuk Kim, Juyoung Park, Andrew Byun, Jaewook Ahn

Abstract: Finding the maximum independent set (MIS) of a large-size graph is a nondeterministic polynomial-time (NP)-complete problem not efficiently solvable with classical computations. Here, we present a set of quantum adiabatic computing data of Rydberg-atom experiments performed to solve the MIS problem of up to 141 atoms randomly arranged on the King's lattice. A total of 582,916 events of Rydberg-ato… ▽ More Finding the maximum independent set (MIS) of a large-size graph is a nondeterministic polynomial-time (NP)-complete problem not efficiently solvable with classical computations. Here, we present a set of quantum adiabatic computing data of Rydberg-atom experiments performed to solve the MIS problem of up to 141 atoms randomly arranged on the King's lattice. A total of 582,916 events of Rydberg-atom measurements are collected for experimental MIS solutions of 733,853 different graphs. We provide the raw image data along with the entire binary determinations of the measured many-body ground states and the classified graph data, to offer bench-mark testing and advanced data-driven analyses for validation of the performance and system improvements of the Rydberg-atom approach. △ Less

Submitted 22 November, 2023; originally announced November 2023.

Comments: 10 pages, 4 figures

Performance of the electromagnetic and hadronic prototype segments of the ALICE Forward Calorimeter

Authors: M. Aehle, J. Alme, C. Arata, I. Arsene, I. Bearden, T. Bodova, V. Borshchov, O. Bourrion, M. Bregant, A. van den Brink, V. Buchakchiev, A. Buhl, T. Chujo, L. Dufke, V. Eikeland, M. Fasel, N. Gauger, A. Gautam, A. Ghimouz, Y. Goto, R. Guernane, T. Hachiya, H. Hassan, L. He, H. Helstrup , et al. (52 additional authors not shown)

Abstract: We present the performance of a full-length prototype of the ALICE Forward Calorimeter (FoCal). The detector is composed of a silicon-tungsten electromagnetic sampling calorimeter with longitudinal and transverse segmentation (FoCal-E) of about 20$X_0$ and a hadronic copper-scintillating-fiber calorimeter (FoCal-H) of about 5$λ_{\rm int}$. The data were taken between 2021 and 2023 at the CERN PS a… ▽ More We present the performance of a full-length prototype of the ALICE Forward Calorimeter (FoCal). The detector is composed of a silicon-tungsten electromagnetic sampling calorimeter with longitudinal and transverse segmentation (FoCal-E) of about 20$X_0$ and a hadronic copper-scintillating-fiber calorimeter (FoCal-H) of about 5$λ_{\rm int}$. The data were taken between 2021 and 2023 at the CERN PS and SPS beam lines with hadron (electron) beams up to energies of 350 (300) GeV. Regarding FoCal-E, we report a comprehensive analysis of its response to minimum ionizing particles across all pad layers. The longitudinal shower profile of electromagnetic showers is measured with a layer-wise segmentation of 1$X_0$. As a projection to the performance of the final detector in electromagnetic showers, we demonstrate linearity in the full energy range, and show that the energy resolution fulfills the requirements for the physics needs. Additionally, the performance to separate two-showers events was studied by quantifying the transverse shower width. Regarding FoCal-H, we report a detailed analysis of the response to hadron beams between 60 and 350 GeV. The results are compared to simulations obtained with a Geant4 model of the test beam setup, which in particular for FoCal-E are in good agreement with the data. The energy resolution of FoCal-E was found to be lower than 3% at energies larger than 100 GeV. The response of FoCal-H to hadron beams was found to be linear, albeit with a significant intercept that is about factor 2 larger than in simulations. Its resolution, which is non-Gaussian and generally larger than in simulations, was quantified using the FWHM, and decreases from about 16% at 100 GeV to about 11% at 350 GeV. The discrepancy to simulations, which is particularly evident at low hadron energies, needs to be further investigated. △ Less

Submitted 16 July, 2024; v1 submitted 13 November, 2023; originally announced November 2023.

Comments: 57 pages (without acronyms), 45 captioned figures

Journal ref: JINST 19 P07006 (2024)

Particle Identification at VAMOS++ with Machine Learning Techniques

Authors: Y. Cho, Y. H. Kim, S. Choi, J. Park, S. Bae, K. I. Hahn, Y. Son, A. Navin, A. Lemasson, M. Rejmund, D. Ramos, D. Ackermann, A. Utepov, C. Fourgeres, J. C. Thomas, J. Goupil, G. Fremont, G. de France, Y. X. Watanabe, Y. Hirayama, S. Jeong, T. Niwase, H. Miyatake, P. Schury, M. Rosenbusch , et al. (23 additional authors not shown)

Abstract: Multi-nucleon transfer reaction between 136Xe beam and 198Pt target was performed using the VAMOS++ spectrometer at GANIL to study the structure of n-rich nuclei around N=126. Unambiguous charge state identification was obtained by combining two supervised machine learning methods, deep neural network (DNN) and positional correction using a gradient-boosting decision tree (GBDT). The new method re… ▽ More Multi-nucleon transfer reaction between 136Xe beam and 198Pt target was performed using the VAMOS++ spectrometer at GANIL to study the structure of n-rich nuclei around N=126. Unambiguous charge state identification was obtained by combining two supervised machine learning methods, deep neural network (DNN) and positional correction using a gradient-boosting decision tree (GBDT). The new method reduced the complexity of the kinetic energy calibration and outperformed the conventional method, improving the charge state resolution by 8% △ Less

Submitted 14 November, 2023; v1 submitted 13 November, 2023; originally announced November 2023.

Journal ref: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Volume 541, August 2023, Pages 240-242

Simulating Photosynthetic Energy Transport on a Photonic Network

Authors: Hao Tang, Xiao-Wen Shang, Zi-Yu Shi, Tian-Shen He, Zhen Feng, Tian-Yu Wang, Ruoxi Shi, Hui-Ming Wang, Xi Tan, Xiao-Yun Xu, Yao Wang, Jun Gao, M. S. Kim, Xian-Min Jin

Abstract: Quantum effects in photosynthetic energy transport in nature, especially for the typical Fenna-Matthews-Olson (FMO) complexes, are extensively studied in quantum biology. Such energy transport processes can be investigated as open quantum systems that blend the quantum coherence and environmental noises, and have been experimentally simulated on a few quantum devices. However, the existing experim… ▽ More Quantum effects in photosynthetic energy transport in nature, especially for the typical Fenna-Matthews-Olson (FMO) complexes, are extensively studied in quantum biology. Such energy transport processes can be investigated as open quantum systems that blend the quantum coherence and environmental noises, and have been experimentally simulated on a few quantum devices. However, the existing experiments always lack a solid quantum simulation for the FMO energy transport due to their constraints to map a variety of issues in actual FMO complexes that have rich biological meanings. Here we successfully map the full coupling profile of the seven-site FMO structure by comprehensive characterization and precise control of the evanescent coupling of the three-dimensional waveguide array. By applying a stochastic dynamical modulation on each waveguide, we introduce the base site energy and the dephasing term in colored noises to faithfully simulate the power spectral density of the FMO complexes. We show our photonic model well interprets the issues including the reorganization energy, vibrational assistance, exciton transfer and energy localization. We further experimentally demonstrate the existence of an optimal transport efficiency at certain dephasing strength, providing a window to closely investigate environment-assisted quantum transport. △ Less

Submitted 3 November, 2023; originally announced November 2023.

Journal ref: npj Quantum Information 10, 29 (2024)

C2C: Cough to COVID-19 Detection in BHI 2023 Data Challenge

Authors: Woo-Jin Chung, Miseul Kim, Hong-Goo Kang

Abstract: This report describes our submission to BHI 2023 Data Competition: Sensor challenge. Our Audio Alchemists team designed an acoustic-based COVID-19 diagnosis system, Cough to COVID-19 (C2C), and won the 1st place in the challenge. C2C involves three key contributions: pre-processing of input signals, cough-related representation extraction leveraging Wav2vec2.0, and data augmentation. Through exper… ▽ More This report describes our submission to BHI 2023 Data Competition: Sensor challenge. Our Audio Alchemists team designed an acoustic-based COVID-19 diagnosis system, Cough to COVID-19 (C2C), and won the 1st place in the challenge. C2C involves three key contributions: pre-processing of input signals, cough-related representation extraction leveraging Wav2vec2.0, and data augmentation. Through experimental findings, we demonstrate C2C's promising potential to enhance the diagnostic accuracy of COVID-19 via cough signals. Our proposed model achieves a ROC-AUC value of 0.7810 in the context of COVID-19 diagnosis. The implementation details and the python code can be found in the following link: https://github.com/Woo-jin-Chung/BHI_2023_challenge_Audio_Alchemists △ Less

Submitted 1 November, 2023; originally announced November 2023.

Comments: 1st place winning paper from the BHI 2023 Data Challenge Competition: Sensor Informatics

Reconstruction of multiplex networks via graph embeddings

Authors: Daniel Kaiser, Siddharth Patwardhan, Minsuk Kim, Filippo Radicchi

Abstract: Multiplex networks are collections of networks with identical nodes but distinct layers of edges. They are genuine representations for a large variety of real systems whose elements interact in multiple fashions or flavors. However, multiplex networks are not always simple to observe in the real world; often, only partial information on the layer structure of the networks is available, whereas the… ▽ More Multiplex networks are collections of networks with identical nodes but distinct layers of edges. They are genuine representations for a large variety of real systems whose elements interact in multiple fashions or flavors. However, multiplex networks are not always simple to observe in the real world; often, only partial information on the layer structure of the networks is available, whereas the remaining information is in the form of aggregated, single-layer networks. Recent works have proposed solutions to the problem of reconstructing the hidden multiplexity of single-layer networks using tools proper of network science. Here, we develop a machine learning framework that takes advantage of graph embeddings, i.e., representations of networks in geometric space. We validate the framework in systematic experiments aimed at the reconstruction of synthetic and real-world multiplex networks, providing evidence that our proposed framework not only accomplishes its intended task, but often outperforms existing reconstruction techniques. △ Less

Submitted 26 February, 2024; v1 submitted 19 October, 2023; originally announced October 2023.

Comments: 12 pages, 10 figures, 2 tables

Journal ref: Phys. Rev. E 109, 024313 (2024)

Pulsed-mode metalorganic vapor-phase epitaxy of GaN on graphene-coated c-sapphire for freestanding GaN thin films

Authors: Seokje Lee, Muhammad S. Abbas, Dongha Yoo, Keundong Lee, Tobiloba G. Fabunmi, Eunsu Lee, Han Ik Kim, Imhwan Kim, Daniel Jang, Sangmin Lee, Jusang Lee, Ki-Tae Park, Changgu Lee, Miyoung Kim, Yun Seog Lee, Celesta S. Chang, Gyu-Chul Yi

Abstract: We report the growth of high-quality GaN epitaxial thin films on graphene-coated c-sapphire substrates using pulsed-mode metalorganic vapor-phase epitaxy, together with the fabrication of freestanding GaN films by simple mechanical exfoliation for transferable light-emitting diodes (LEDs). High-quality GaN films grown on the graphene-coated sapphire substrates were easily lifted off using thermal… ▽ More We report the growth of high-quality GaN epitaxial thin films on graphene-coated c-sapphire substrates using pulsed-mode metalorganic vapor-phase epitaxy, together with the fabrication of freestanding GaN films by simple mechanical exfoliation for transferable light-emitting diodes (LEDs). High-quality GaN films grown on the graphene-coated sapphire substrates were easily lifted off using thermal release tape and transferred onto foreign substrates. Furthermore, we revealed that the pulsed operation of ammonia flow during GaN growth was a critical factor for the fabrication of high-quality freestanding GaN films. These films, exhibiting excellent single crystallinity, were utilized to fabricate transferable GaN LEDs by heteroepitaxially growing InxGa1-xN/GaN multiple quantum wells and a p-GaN layer on the GaN films, showing their potential application in advanced optoelectronic devices. △ Less

Submitted 5 December, 2023; v1 submitted 8 October, 2023; originally announced October 2023.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters, copyright 2023 American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acs.nanolett.3c03333

On-Command Disassembly of Microrobotic Superstructures for Transport and Delivery of Magnetic Micromachines

Authors: Fabian C. Landers, Valentin Gantenbein, Lukas Hertle, Andrea Veciana, Joaquin Llacer-Wintle, Xiang-Zhong Chen, Hao Ye, Carlos Franco, Josep Puigmarti-Luis, Minsoo Kim, Bradley J. Nelson, Salvador Pane

Abstract: Magnetic microrobots have been developed for navigating microscale environments by means of remote magnetic fields. However, limited propulsion speeds at small scales remain an issue in the maneuverability of these devices as magnetic force and torque are proportional to their magnetic volume. Here, we propose a microrobotic superstructure, which, as analogous to a supramolecular system, consists… ▽ More Magnetic microrobots have been developed for navigating microscale environments by means of remote magnetic fields. However, limited propulsion speeds at small scales remain an issue in the maneuverability of these devices as magnetic force and torque are proportional to their magnetic volume. Here, we propose a microrobotic superstructure, which, as analogous to a supramolecular system, consists of two or more microrobotic units that are interconnected and organized through a physical (transient) component (a polymeric frame or a thread). Our superstructures consist of microfabricated magnetic helical micromachines interlocked by a magnetic gelatin nanocomposite containing iron oxide nanoparticles (IONPs). While the microhelices enable the motion of the superstructure, the IONPs serve as heating transducers for dissolving the gelatin chassis via magnetic hyperthermia. In a practical demonstration, we showcase the superstructure's motion with a gradient magnetic field in a large channel, the disassembly of the superstructure and release of the helical micromachines by a high-frequency alternating magnetic field, and the corkscrew locomotion of the released helices through a small channel via a rotating magnetic field. This adaptable microrobotic superstructure reacts to different magnetic inputs, which could be used to perform complex delivery procedures within intricate regions of the human body. △ Less

Submitted 28 September, 2023; originally announced October 2023.

Highly-Sensitive Resonance-Enhanced Organic Photodetectors for Shortwave Infrared Sensing

Authors: Hoang Mai Luong, Chokchai Kaiyasuan, Ahra Yi, Sangmin Chae, Brian Minki Kim, Patchareepond Panoy, Hyo Jung Kim, Vinich Promarak, Yasuo Miyata, Hidenori Nakayama, Thuc-Quyen Nguyen

Abstract: Shortwave infrared (SWIR) has various applications, including night vision, remote sensing, and medical imaging. SWIR organic photodetectors (OPDs) offer advantages such as flexibility, cost-effectiveness, and tunable properties, however, lower sensitivity and limited spectral coverage compared to inorganic counterparts are major drawbacks. Here, we propose a simple yet effective and widely applic… ▽ More Shortwave infrared (SWIR) has various applications, including night vision, remote sensing, and medical imaging. SWIR organic photodetectors (OPDs) offer advantages such as flexibility, cost-effectiveness, and tunable properties, however, lower sensitivity and limited spectral coverage compared to inorganic counterparts are major drawbacks. Here, we propose a simple yet effective and widely applicable strategy to extend the wavelength detection range of OPD to a longer wavelength, using resonant optical microcavity. We demonstrate a proof-of-concept in PTB7-Th:COTIC-4F blend system, achieving external quantum efficiency (EQE) > 50 % over a broad spectrum 450 - 1100 nm with a peak specific detectivity (D*) of 1.1E13 Jones at 1100 nm, while cut-off bandwidth, speed, and linearity are preserved. By employing a novel small-molecule acceptor IR6, a record high EQE = 35 % and D* = 4.1E12 Jones are obtained at 1150 nm. This research emphasizes the importance of optical design in optoelectronic devices, presenting a considerably simpler method to expand the photodetection range compared to a traditional approach that involves developing absorbers with narrow optical gaps. △ Less

Submitted 13 September, 2023; originally announced September 2023.

Novel Smart N95 Filtering Facepiece Respirator with Real-time Adaptive Fit Functionality and Wireless Humidity Monitoring for Enhanced Wearable Comfort

Authors: Kangkyu Kwon, Yoon Jae Lee, Yeongju Jung, Ira Soltis, Chanyeong Choi, Yewon Na, Lissette Romero, Myung Chul Kim, Nathan Rodeheaver, Hodam Kim, Michael S. Lloyd, Ziqing Zhuang, William King, Susan Xu, Seung-Hwan Ko, Jinwoo Lee, Woon-Hong Yeo

Abstract: The widespread emergence of the COVID-19 pandemic has transformed our lifestyle, and facial respirators have become an essential part of daily life. Nevertheless, the current respirators possess several limitations such as poor respirator fit because they are incapable of covering diverse human facial sizes and shapes, potentially diminishing the effect of wearing respirators. In addition, the cur… ▽ More The widespread emergence of the COVID-19 pandemic has transformed our lifestyle, and facial respirators have become an essential part of daily life. Nevertheless, the current respirators possess several limitations such as poor respirator fit because they are incapable of covering diverse human facial sizes and shapes, potentially diminishing the effect of wearing respirators. In addition, the current facial respirators do not inform the user of the air quality within the smart facepiece respirator in case of continuous long-term use. Here, we demonstrate the novel smart N-95 filtering facepiece respirator that incorporates the humidity sensor and pressure sensory feedback-enabled self-fit adjusting functionality for the effective performance of the facial respirator to prevent the transmission of airborne pathogens. The laser-induced graphene (LIG) constitutes the humidity sensor, and the pressure sensor array based on the dielectric elastomeric sponge monitors the respirator contact on the face of the user, providing the sensory information for a closed-loop feedback mechanism. As a result of the self-fit adjusting mode along with elastomeric lining, the fit factor is increased by 3.20 and 5 times at average and maximum respectively. We expect that the experimental proof-of-concept of this work will offer viable solutions to the current commercial respirators to address the limitations. △ Less

Submitted 8 September, 2023; originally announced September 2023.

Comments: 20 pages, 5 figures, 1 table, submitted for possible publication

MSC Class: 92C55

Calibration and Physics with ARA Station 1: A Unique Askaryan Radio Array Detector

Authors: M. F. H Seikh, D. Z. Besson, S. Ali, P. Allison, S. Archambault, J. J. Beatty, A. Bishop, P. Chen, Y. C. Chen, B. A. Clark, W. Clay, A. Connolly, K. Couberly, L. Cremonesi, A. Cummings, P. Dasgupta, R. Debolt, S. De Kockere, K. D. de Vries, C. Deaconu, M. A. DuVernois, J. Flaherty, E. Friedman, R. Gaior, P. Giri , et al. (48 additional authors not shown)

Abstract: The Askaryan Radio Array Station 1 (A1), the first among five autonomous stations deployed for the ARA experiment at the South Pole, is a unique ultra-high energy neutrino (UHEN) detector based on the Askaryan effect that uses Antarctic ice as the detector medium. Its 16 radio antennas (distributed across 4 strings, each with 2 Vertically Polarized (VPol), 2 Horizontally Polarized (HPol) receivers… ▽ More The Askaryan Radio Array Station 1 (A1), the first among five autonomous stations deployed for the ARA experiment at the South Pole, is a unique ultra-high energy neutrino (UHEN) detector based on the Askaryan effect that uses Antarctic ice as the detector medium. Its 16 radio antennas (distributed across 4 strings, each with 2 Vertically Polarized (VPol), 2 Horizontally Polarized (HPol) receivers), and 2 strings of transmitting antennas (calibration pulsers, CPs), each with 1 VPol and 1 HPol channel, are deployed at depths less than 100 m within the shallow firn zone of the 2.8 km thick South Pole (SP) ice. We apply different methods to calibrate its Ice Ray Sampler second generation (IRS2) chip for timing offset and ADC-to-Voltage conversion factors using a known continuous wave input signal to the digitizer, and achieve a precision of sub-nanoseconds. We achieve better calibration for odd, compared to even samples, and also find that the HPols under-perform relative to the VPol channels. Our timing calibrated data is subsequently used to calibrate the ADC-to-Voltage conversion as well as precise antenna locations, as a precursor to vertex reconstruction. The calibrated data will then be analyzed for UHEN signals in the final step of data compression. The ability of A1 to scan the firn region of SP ice sheet will contribute greatly towards a 5-station analysis and will inform the design of the planned IceCube Gen-2 radio array. △ Less

Submitted 14 August, 2023; originally announced August 2023.

Comments: 10 pages

Journal ref: PoS ICRC2023 (2023) 1163

Optical vortex harmonic generation facilitated by photonic spin-orbit entanglement

Authors: Chang Kyun Ha, Eun Mi Kim, Kyoung Jun Moon, Myeong Soo Kang

Abstract: Photons can undergo spin-orbit coupling, by which the polarization (spin) and spatial profile (orbit) of the electromagnetic field interact and mix. Strong photonic spin-orbit coupling may reportedly arise from light propagation confined in a small cross-section, where the optical modes feature spin-orbit entanglement. However, while photonic Hamiltonians generally exhibit nonlinearity, the role a… ▽ More Photons can undergo spin-orbit coupling, by which the polarization (spin) and spatial profile (orbit) of the electromagnetic field interact and mix. Strong photonic spin-orbit coupling may reportedly arise from light propagation confined in a small cross-section, where the optical modes feature spin-orbit entanglement. However, while photonic Hamiltonians generally exhibit nonlinearity, the role and implication of spin-orbit entanglement in nonlinear optics have received little attention and are still elusive. Here, we report the first experimental demonstration of nonlinear optical frequency conversion, where spin-orbit entanglement facilitates spin-to-orbit transfer among different optical frequencies. By pumping a multimode optical nanofiber with a spin-polarized Gaussian pump beam, we produce an optical vortex at the third harmonic, which has long been regarded as a forbidden process in isotropic media. Our findings offer a unique and powerful means for efficient optical vortex generation that only incorporates a single Gaussian pump beam, in sharp contrast to any other approaches employing structured pump fields or sophisticatedly designed media. Our work opens up new possibilities of spin-orbit-coupling subwavelength waveguides, inspiring fundamental studies of nonlinear optics involving various types of structured light, as well as paving the way for the realization of hybrid quantum systems comprised of telecom photonic networks and long-lived quantum memories. △ Less

Submitted 5 August, 2023; originally announced August 2023.

Comments: 52 pages, 10 figures

Exploring the impact of graph locality for the resolution of MIS with neutral atom devices

Authors: Constantin Dalyac, Louis-Paul Henry, Minhyuk Kim, Jaewook Ahn, Loïc Henriet

Abstract: In the past years, many quantum algorithms have been proposed to tackle hard combinatorial problems. In particular, the Maximum Independent Set (MIS) is a known NP-hard problem that can be naturally encoded in Rydberg atom arrays. By representing a graph with an ensemble of neutral atoms one can leverage Rydberg dynamics to naturally encode the constraints and the solution to MIS. However, the cla… ▽ More In the past years, many quantum algorithms have been proposed to tackle hard combinatorial problems. In particular, the Maximum Independent Set (MIS) is a known NP-hard problem that can be naturally encoded in Rydberg atom arrays. By representing a graph with an ensemble of neutral atoms one can leverage Rydberg dynamics to naturally encode the constraints and the solution to MIS. However, the classes of graphs that can be directly mapped ``vertex-to-atom" on standard devices with 2D capabilities are currently limited to Unit-Disk graphs. In this setting, the inherent spatial locality of the graphs can be leveraged by classical polynomial-time approximation schemes (PTAS) that guarantee an $ε$-approximate solution. In this work, we build upon recent progress made for using 3D arrangements of atoms to embed more complex classes of graphs. We report experimental and theoretical results which represent important steps towards tackling combinatorial tasks on quantum computers for which no classical efficient $\varepsilon$-approximation scheme exists. △ Less

Submitted 23 June, 2023; originally announced June 2023.

Comments: Complements the results from arXiv:2209.05164 from some of the authors with experimental exploration and additional theoretical analysis

Experimental quantum channel discrimination using metastable states of a trapped ion

Authors: Kyle DeBry, Jasmine Sinanan-Singh, Colin D. Bruzewicz, David Reens, May E. Kim, Matthew P. Roychowdhury, Robert McConnell, Isaac L. Chuang, John Chiaverini

Abstract: We present experimental demonstrations of accurate and unambiguous single-shot discrimination between three quantum channels using a single trapped $^{40}\text{Ca}^{+}$ ion. The three channels cannot be distinguished unambiguously using repeated single channel queries, the natural classical analogue. We develop techniques for using the 6-dimensional $\text{D}_{5/2}$ state space for quantum informa… ▽ More We present experimental demonstrations of accurate and unambiguous single-shot discrimination between three quantum channels using a single trapped $^{40}\text{Ca}^{+}$ ion. The three channels cannot be distinguished unambiguously using repeated single channel queries, the natural classical analogue. We develop techniques for using the 6-dimensional $\text{D}_{5/2}$ state space for quantum information processing, and we implement protocols to discriminate quantum channel analogues of phase shift keying and amplitude shift keying data encodings used in classical radio communication. The demonstrations achieve discrimination accuracy exceeding $99\%$ in each case, limited entirely by known experimental imperfections. △ Less

Submitted 6 November, 2023; v1 submitted 23 May, 2023; originally announced May 2023.

Comments: Main text: 6 pages, 4 figures. Supplementary Material: 7 pages, 5 figures, 2 tables Fixed a reference and updated publication information

Journal ref: Phys. Rev. Lett. 131 (2023), 170602

Probing spectral features of quantum many-body systems with quantum simulators

Authors: Jinzhao Sun, Lucia Vilchez-Estevez, Vlatko Vedral, Andrew T. Boothroyd, M. S. Kim

Abstract: The efficient probing of spectral features of quantum many-body systems is important for characterising and understanding the structure and dynamics of quantum materials. In this work, we establish a framework for probing the excitation spectrum of quantum many-body systems with quantum simulators. Our approach effectively realises a spectral detector by processing the dynamics of observables with… ▽ More The efficient probing of spectral features of quantum many-body systems is important for characterising and understanding the structure and dynamics of quantum materials. In this work, we establish a framework for probing the excitation spectrum of quantum many-body systems with quantum simulators. Our approach effectively realises a spectral detector by processing the dynamics of observables with time intervals drawn from a defined probability distribution, which only requires native time evolution governed by the Hamiltonian without any ancilla. The critical element of our method is the engineered emergence of frequency resonance such that the excitation spectrum can be probed. We show that the time complexity for transition energy estimation has a logarithmic dependence on simulation accuracy, and discuss the noise e robustness of our spectroscopic method. We present simulation results for the spectral features of typical quantum systems, including quantum spins, fermions and bosons. We experimentally demonstrate how spectroscopic features of spin lattice models can be probed with IBM quantum devices. △ Less

Submitted 12 May, 2023; originally announced May 2023.

Comments: 18 pages, 8 figures

Prediction of Protein Aggregation Propensity via Data-driven Approaches

Authors: Seungpyo Kang, Minseon Kim, Jiwon Sun, Myeonghun Lee, Kyoungmin Min

Abstract: Protein aggregation occurs when misfolded or unfolded proteins physically bind together, and can promote the development of various amyloid diseases. This study aimed to construct surrogate models for predicting protein aggregation via data-driven methods using two types of databases. First, an aggregation propensity score database was constructed by calculating the scores for protein structures i… ▽ More Protein aggregation occurs when misfolded or unfolded proteins physically bind together, and can promote the development of various amyloid diseases. This study aimed to construct surrogate models for predicting protein aggregation via data-driven methods using two types of databases. First, an aggregation propensity score database was constructed by calculating the scores for protein structures in Protein Data Bank using Aggrescan3D 2.0. Moreover, feature- and graph-based models for predicting protein aggregation have been developed using this database. The graph-based regression model outperformed the feature-based model, resulting in R2 of 0.95, although it intrinsically required protein structures. Second, for the experimental data, a feature-based model was built using Curated Protein Aggregation Database 2.0, to predict the aggregated intensity curves. In summary, this study suggests the approaches that are more effective in predicting protein aggregation, depending on the type of descriptor and the database. △ Less

Submitted 6 April, 2023; originally announced April 2023.

Scaling NbTiN-based ac-powered Josephson digital to 400M devices/cm$^2$

Authors: Anna Herr, Quentin Herr, Steve Brebels, Min-Soo Kim, Ankit Pokhrel, Blake Hodges, Trent Josephsen, Sabine ONeal, Ruiheng Bai, Katja Nowack, Anne-Marie Valente-Feliciano, Zsolt Tökei

Abstract: We describe a fabrication stackup for digital logic with 16 superconducting NbTiN layers, self-shunted a-silicon barrier Josephson Junctions (JJs), and low loss, high-$κ$ tunable HZO capacitors. The stack enables 400 MJJ/cm$^2$ device density, efficient routing, and AC power distribution on a resonant network. The materials scale beyond 28nm lithography and are compatible with standard high-temper… ▽ More We describe a fabrication stackup for digital logic with 16 superconducting NbTiN layers, self-shunted a-silicon barrier Josephson Junctions (JJs), and low loss, high-$κ$ tunable HZO capacitors. The stack enables 400 MJJ/cm$^2$ device density, efficient routing, and AC power distribution on a resonant network. The materials scale beyond 28nm lithography and are compatible with standard high-temperature CMOS processes. We report initial results for two-metal layer NbTiN wires with 50nm critical dimension. A semi-ascendance wire-and-via process module using 193i lithography and 50nm critical dimension has shown cross-section uniformity of 1%=1s across the 300mm wafer, critical temperature of 12.5K, and critical current of 0.1mA at 4.2K. We also present a new design of the resonant AC power network enabled by NbTiN wires and HZO MIM capacitors. The design matches the device density and provides a 30 GHz clock with estimated efficiency of up to 90%. Finally, magnetic imaging of patterned NbTiN ground planes shows low intrinsic defectivity and consistent trapping of vorteces in 0.5 mm holes spaced on a 20 $μ$m x 20 $μ$m grid. △ Less

Submitted 29 April, 2023; v1 submitted 29 March, 2023; originally announced March 2023.

Comments: 7 pages, 3 figures

Nonreciprocity in Cavity Magnonics at Milikelvin Temperature

Authors: Mun Kim, Armin Tabesh, Tyler Zegray, Shabir Barzanjeh, Can-Ming Hu

Abstract: Incorporating cavity magnonics has opened up a new avenue in controlling non-reciprocity. This work examines a yttrium iron garnet sphere coupled to a planar microwave cavity at milli-Kelvin temperature. Non-reciprocal device behavior results from the cooperation of coherent and dissipative coupling between the Kittel mode and a microwave cavity mode. The device's bi-directional transmission was m… ▽ More Incorporating cavity magnonics has opened up a new avenue in controlling non-reciprocity. This work examines a yttrium iron garnet sphere coupled to a planar microwave cavity at milli-Kelvin temperature. Non-reciprocal device behavior results from the cooperation of coherent and dissipative coupling between the Kittel mode and a microwave cavity mode. The device's bi-directional transmission was measured and compared to the theory derived previously in the room temperature experiment. Investigations are also conducted into key performance metrics such as isolation, bandwidth, and insertion loss. The findings point to the coexistence of coherent and dissipative interactions at cryogenic conditions, and one can leverage their cooperation to achieve directional isolation. This work foreshadows the application of a cavity magnonic isolator for on-chip readout and signal processing in superconducting circuitry. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Comments: 7 pages

Quantum Programming of the Satisfiability Problem with Rydberg Atom Graphs

Authors: Seokho Jeong, Minhyuk Kim, Minki Hhan, Jaewook Ahn

Abstract: Finding a quantum computing method to solve nondeterministic polynomial time (NP)-complete problems is currently of paramount importance in quantum information science. Here an experiment is presented to demonstrate the use of Rydberg atoms to solve (i.e., to program and obtain the solution of) the satisfiability (3-SAT) problem, which is the prototypical NP-complete problem allowing general progr… ▽ More Finding a quantum computing method to solve nondeterministic polynomial time (NP)-complete problems is currently of paramount importance in quantum information science. Here an experiment is presented to demonstrate the use of Rydberg atoms to solve (i.e., to program and obtain the solution of) the satisfiability (3-SAT) problem, which is the prototypical NP-complete problem allowing general programming of all NP problems. Boolean expressions of the 3-SAT problem are programmed with the blockade interactions of Rydberg atom graphs and their many-body ground states are experimentally obtained, to determine the satisfiabilities of the given 3-SAT problem instances quantum mechanically. △ Less

Submitted 28 February, 2023; originally announced February 2023.

Comments: 6 pages, 4 figures

Melting Domain Size and Recrystallization Dynamics of Ice Revealed by Time-Resolved X-ray Scattering

Authors: Cheolhee Yang, Marjorie Ladd-Parada, Kyeongmin Nam, Sangmin Jeong, Seonju You, Alexander Späh, Harshad Pathak, Tobias Eklund, Thomas J. Lane, Jae Hyuk Lee, Intae Eom, Minseok Kim, Katrin Amann- Winkel, Fivos Perakis, Anders Nilsson, Kyung Hwan Kim

Abstract: The phase transition between water and ice is ubiquitous and one of the most important phenomena in nature. Here, we performed time-resolved x-ray scattering experiments capturing the melting and recrystallization dynamics of ice. The ultrafast heating of ice I is induced by an IR laser pulse and probed with an intense x-ray pulse, which provided us with direct structural information on different… ▽ More The phase transition between water and ice is ubiquitous and one of the most important phenomena in nature. Here, we performed time-resolved x-ray scattering experiments capturing the melting and recrystallization dynamics of ice. The ultrafast heating of ice I is induced by an IR laser pulse and probed with an intense x-ray pulse, which provided us with direct structural information on different length scales. From the wide-angle x-ray scattering (WAXS) patterns, the molten fraction, as well as the corresponding temperature at each delay, were determined. The small-angle x-ray scattering (SAXS) patterns, together with the information extracted from the WAXS analysis, provided the time-dependent change of the size and the number of the liquid domains. The results show partial melting (~13 %) and superheating of ice occurring at around 20 ns. After 100 ns, the average size of the liquid domains grows from about 2.5 nm to 4.5 nm by the coalescence of approximately six adjacent domains. Subsequently, we capture the recrystallization of the liquid domains, which occurs on microsecond timescales due to the cooling by heat dissipation and results to a decrease of the average liquid domain size. △ Less

Submitted 7 February, 2023; originally announced February 2023.

Spectral analysis of spin noise in an optically spin-polarized stochastic Bloch equation driven by noisy magnetic fields

Authors: M. M. Kim, Sangkyung Lee

Abstract: We provide a closed-form autocorrelation function and power spectral density (PSD) of the solution, along a prescribed probing direction, to a noisy version of an optically pumped Bloch equation wherein each component of the external magnetic field is subject to (possibly correlated) white noise. We conclude that, up to first order in the white noise covariance amplitudes, noise in the bias B-fiel… ▽ More We provide a closed-form autocorrelation function and power spectral density (PSD) of the solution, along a prescribed probing direction, to a noisy version of an optically pumped Bloch equation wherein each component of the external magnetic field is subject to (possibly correlated) white noise. We conclude that, up to first order in the white noise covariance amplitudes, noise in the bias B-field direction does not affect the autocorrelation function. Moreover, the noise terms for the remaining two axes make different contributions to the magnetic noise-driven spin PSD; in particular, the contribution corresponding to noises perpendicular to the probing direction dominates at high frequencies. Some results concerning the second (and higher) order terms are given, and an effective Larmor frequency shift caused by anisotropic transversal B-field noises, towards the DC direction, is revealed. The analytic results are supported by Monte Carlo simulations employing the Euler-Maruyama method. △ Less

Submitted 7 October, 2023; v1 submitted 7 February, 2023; originally announced February 2023.

Comments: 16 pages, 7 figures

Tailored plasmons in pentacene/graphene heterostructures with interlayer electron transfer

Authors: Fengrui Hu, Minsung Kim, Y. Zhang, Yilong Luan, Kai-Ming Ho, Yi Shi, Cai-Zhuang Wang, Xinran Wang, Zhe Fei

Abstract: Van der Waals (vdW) heterostructures, which are produced by the precise assemblies of varieties of two-dimensional (2D) materials, have demonstrated many novel properties and functionalities. Here we report a nano-plasmonic study of vdW heterostructures that were produced by depositing ordered molecular layers of pentacene on top of graphene. We find through nano-infrared (IR) imaging that surface… ▽ More Van der Waals (vdW) heterostructures, which are produced by the precise assemblies of varieties of two-dimensional (2D) materials, have demonstrated many novel properties and functionalities. Here we report a nano-plasmonic study of vdW heterostructures that were produced by depositing ordered molecular layers of pentacene on top of graphene. We find through nano-infrared (IR) imaging that surface plasmons formed due to the collective oscillations of Dirac fermions in graphene are highly sensitive to the adjacent pentacene layers. In particular, the plasmon wavelength declines systematically but nonlinearly with increasing pentacene thickness. Further analysis and density functional theory (DFT) calculations indicate that the observed peculiar thickness dependence is mainly due to the tunneling-type electron transfer from pentacene to graphene. Our work unveils a new method for tailoring graphene plasmons and deepens our understanding of the intriguing nano-optical phenomena due to interlayer couplings in novel vdW heterostructures. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: 21 pages

Journal ref: Nano Lett. 19, 6058-6064 (2019)

Imaging Stacking-Dependent Surface Plasmon Polaritons in Trilayer Graphene

Authors: Yilong Luan, Jun Qian, Minsung Kim, Kai-Ming Ho, Yi Shi, Yun Li, Cai-Zhuang Wang, Michael C. Tringides, Zhe Fei

Abstract: We report a nano-infrared (IR) imaging study of trilayer graphene (TLG) with both ABA (Bernal) and ABC (rhombohedral) stacking orders using the scattering-type scanning near-field optical microscope (s-SNOM). With s-SNOM operating in the mid-IR region, we mapped in real space the surface plasmon polaritons (SPPs) of ABA-TLG and ABC-TLG, which are tunable with electrical gating. Through quantitativ… ▽ More We report a nano-infrared (IR) imaging study of trilayer graphene (TLG) with both ABA (Bernal) and ABC (rhombohedral) stacking orders using the scattering-type scanning near-field optical microscope (s-SNOM). With s-SNOM operating in the mid-IR region, we mapped in real space the surface plasmon polaritons (SPPs) of ABA-TLG and ABC-TLG, which are tunable with electrical gating. Through quantitative modeling of the plasmonic imaging data, we found that the plasmon wavelength of ABA-TLG is significantly larger than that of ABC-TLG, resulting in a sizable impedance mismatch and hence a strong plasmon reflection at the ABA/ABC lateral junction. Further analysis indicates that the different plasmonic responses of the two types of TLG are directly linked to their electronic structures and carrier properties. Our work uncovers the physics behind the stacking-dependent plasmonic responses of TLG and sheds light on future applications of TLG and the ABA/ABC junctions in IR plasmonics and planar nano-optics. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: 11 pages

Journal ref: Phys. Rev. Applied 18, 024052 (2022)

Intensity interferometry for holography with quantum and classical light

Authors: G. S. Thekkadath, D. England, F. Bouchard, Y. Zhang, M. S. Kim, B. Sussman

Abstract: As first demonstrated by Hanbury Brown and Twiss, it is possible to observe interference between independent light sources by measuring correlations in their intensities rather than their amplitudes. In this work, we apply this concept of intensity interferometry to holography. We combine a signal beam with a reference and measure their intensity cross-correlations using a time-tagging single-phot… ▽ More As first demonstrated by Hanbury Brown and Twiss, it is possible to observe interference between independent light sources by measuring correlations in their intensities rather than their amplitudes. In this work, we apply this concept of intensity interferometry to holography. We combine a signal beam with a reference and measure their intensity cross-correlations using a time-tagging single-photon camera. These correlations reveal an interference pattern from which we reconstruct the signal wavefront in both intensity and phase. We demonstrate the principle with classical and quantum light, including a single photon. Since the signal and reference do not need to be phase-stable, this technique can be used to generate holograms of self-luminous or remote objects using a local reference, thus opening the door to new holography applications. △ Less

Submitted 25 May, 2023; v1 submitted 24 January, 2023; originally announced January 2023.

Comments: 10 pages, 9 figures; includes Supplemental Material

Journal ref: Sci. Adv. 9, eadh1439 (2023)

Ion sensors with crown ether-functionalized nanodiamonds

Authors: Changhao Li, Shao-Xiong Lennon Luo, Daniel M. Kim, Guoqing Wang, Paola Cappellaro

Abstract: Alkali metal ions such as sodium and potassium cations play fundamental roles in biology. Developing highly sensitive and selective methods to both detect and quantify these ions is of considerable importance for medical diagnostics and bioimaging. Fluorescent nanoparticles have emerged as powerful tools for nanoscale imaging, but their optical properties need to be supplemented with specificity t… ▽ More Alkali metal ions such as sodium and potassium cations play fundamental roles in biology. Developing highly sensitive and selective methods to both detect and quantify these ions is of considerable importance for medical diagnostics and bioimaging. Fluorescent nanoparticles have emerged as powerful tools for nanoscale imaging, but their optical properties need to be supplemented with specificity to particular chemical and biological signals in order to provide further information about biological processes. Nitrogen-vacancy (NV) centers in diamond are particularly attractive as fluorescence markers, thanks to their optical stability, biocompatibility and further ability to serve as highly sensitive quantum sensors of temperature, magnetic and electric fields in ambient conditions. In this work, by covalently grafting crown ether structures on the surface of nanodiamonds (NDs), we build sensors that are capable of detecting specific alkali ions such as sodium cations. We will show that the presence of these metal ions modifies the charge state of NV centers inside the ND, which can then be read out by measuring their photoluminescence spectrum. Our work paves the way for designing selective biosensors based on NV centers in diamond. △ Less

Submitted 8 January, 2023; originally announced January 2023.

Comments: 8 pages, 4 figures

Indistinguishable photons from an artificial atom in silicon photonics

Authors: Lukasz Komza, Polnop Samutpraphoot, Mutasem Odeh, Yu-Lung Tang, Milena Mathew, Jiu Chang, Hanbin Song, Myung-Ki Kim, Yihuang Xiong, Geoffroy Hautier, Alp Sipahigil

Abstract: Silicon is the ideal material for building electronic and photonic circuits at scale. Spin qubits and integrated photonic quantum technologies in silicon offer a promising path to scaling by leveraging advanced semiconductor manufacturing and integration capabilities. However, the lack of deterministic quantum light sources, two-photon gates, and spin-photon interfaces in silicon poses a major cha… ▽ More Silicon is the ideal material for building electronic and photonic circuits at scale. Spin qubits and integrated photonic quantum technologies in silicon offer a promising path to scaling by leveraging advanced semiconductor manufacturing and integration capabilities. However, the lack of deterministic quantum light sources, two-photon gates, and spin-photon interfaces in silicon poses a major challenge to scalability. In this work, we show a new type of indistinguishable photon source in silicon photonics based on an artificial atom. We show that a G center in a silicon waveguide can generate high-purity telecom-band single photons. We perform high-resolution spectroscopy and time-delayed two-photon interference to demonstrate the indistinguishability of single photons emitted from a G center in a silicon waveguide. Our results show that artificial atoms in silicon photonics can source highly coherent single photons suitable for photonic quantum networks and processors. △ Less

Submitted 16 November, 2022; originally announced November 2022.

Comments: 10 pages, 9 figures

Journal ref: Nature Communications 15, 6920 (2024)

High-energy betatron source driven by a 4-PW laser with applications to non-destructive imaging

Authors: Calin Ioan Hojbota, Mohammad Mirzaie, Do Yeon Kim, Tae Gyu Pak, Mohammad Rezaei-Pandari, Vishwa Bandhu Pathak, Jong Ho Jeon, Jin Woo Yoon, Jae Hae Sung, Seong Ku Lee, Chul Min Kim, Ki Yong Kim, Chang Hee Nam

Abstract: Petawatt-class lasers can produce multi-GeV electron beams through laser wakefield electron acceleration. As a by-product, the accelerated electron beams can generate broad synchrotron-like radiation known as betatron radiation. In the present work, we measure the properties of the radiation produced from 2 GeV, 215 pC electron beams, which shows a broad radiation spectrum with a critical energy o… ▽ More Petawatt-class lasers can produce multi-GeV electron beams through laser wakefield electron acceleration. As a by-product, the accelerated electron beams can generate broad synchrotron-like radiation known as betatron radiation. In the present work, we measure the properties of the radiation produced from 2 GeV, 215 pC electron beams, which shows a broad radiation spectrum with a critical energy of 515 keV, extending up to MeV photon energies and 10 mrad divergence. Due to its high energy and flux, such radiation is an ideal candidate for gamma-ray radiography of dense objects. We employed a compact betatron radiation setup operated at relatively high-repetition rates (0.1 Hz) and used it to scan cm-sized objects: a DRAM circuit, BNC and SMA connectors, a padlock and a gas jet nozzle. GEANT4 simulations were carried out to reproduce the radiograph of the gas jet. The setup and the radiation source can reveal the interior structure of the objects at the sub-mm level, proving that it can further be applied to diagnose cracks or holes in various components. The radiation source presented here is a valuable tool for non-destructive inspection and for applications in high-energy-density physics such as nuclear fusion. △ Less

Submitted 15 November, 2022; originally announced November 2022.

Comments: 15 pages, 6 figures