-
Is A 15-minute City within Reach in the United States? An Investigation of Activity-Based Mobility Flows in the 12 Most Populous US Cities
Authors:
Tanhua Jin,
Kailai Wang,
Yanan Xin,
Jian Shi,
Ye Hong,
Frank Witlox
Abstract:
Enhanced efforts in the transportation sector should be implemented to mitigate the adverse effects of CO2 emissions resulting from zoning-based planning paradigms. The innovative concept of the 15-minute city, with a focus on proximity-based planning, holds promise in minimizing unnecessary travel and advancing the progress toward achieving carbon neutrality. However, an important research questi…
▽ More
Enhanced efforts in the transportation sector should be implemented to mitigate the adverse effects of CO2 emissions resulting from zoning-based planning paradigms. The innovative concept of the 15-minute city, with a focus on proximity-based planning, holds promise in minimizing unnecessary travel and advancing the progress toward achieving carbon neutrality. However, an important research question that remains insufficiently explored is: to what extent is a 15-minute city concept within reach for US cities? This paper establishes a comprehensive framework to evaluate the 15-minute city concept using SafeGraph Point of Interest (POI) check-in data in the 12 most populous US cities. The results reveal that residents are more likely to rely on cars due to the fact that most of their essential activities are located beyond convenient walking, cycling, and public transit distances. However, there is significant potential for the implementation of the 15-minute city concept, as most residents' current activities can be accommodated within a 15-minute radius by the aforementioned low-emission modes of transportation. Our findings can offer policymakers insight into how far US cities are away from the 15-minute city and the potential CO2 emission reduction they can expect if the concept is successfully implemented.
△ Less
Submitted 22 October, 2023;
originally announced October 2023.
-
Directional emission in an on-chip acoustic waveguide
Authors:
Timothy M. F. Hirsch,
Nicolas P. Mauranyapin,
Erick Romero,
Tina Jin,
Glen Harris,
Christopher G. Baker,
Warwick . P. Bowen
Abstract:
Integrated acoustic circuits leverage guided acoustic waves for applications ranging from radio-frequency filters to quantum state transfer, biochemical sensing and nanomechanical computing. In many applications it is desirable to have a method for unidirectional acoustic wave emission. In this work we demonstrate directional emission in an integrated single-mode, on-chip membrane waveguide, demon…
▽ More
Integrated acoustic circuits leverage guided acoustic waves for applications ranging from radio-frequency filters to quantum state transfer, biochemical sensing and nanomechanical computing. In many applications it is desirable to have a method for unidirectional acoustic wave emission. In this work we demonstrate directional emission in an integrated single-mode, on-chip membrane waveguide, demonstrating over 99.9% directional suppression and reconfigurable directionality. This avoids both loss and unwanted crosstalk, allowing the creation of more complex and compact phononic circuits.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Nanometer displacement measurement based on metrological self-mixing grating interferometer traceable to the pitch standard of one-dimension chromium self-traceable grating
Authors:
Zhenjie Gu,
Zhangning Xie,
Zhikun Chang,
Guangxu Xiao,
Zhijun Yin,
Zichao Lin,
Tong Zhou,
Lihua Lei,
Tao Jin,
Dongbai Xue,
Xiao Deng,
Xinbin Chen,
Tongbao Li
Abstract:
Traceability of precision instrument and measuring method is the core issue in metrology science. In the field of nanometer length measurement, the laser interferometers are usually used to trace the measurement value to the laser wavelength, but the laser wavelength is sensitive to the environment disturbance. Chromium self-traceable grating is an ideal nanometer length reference grating with pit…
▽ More
Traceability of precision instrument and measuring method is the core issue in metrology science. In the field of nanometer length measurement, the laser interferometers are usually used to trace the measurement value to the laser wavelength, but the laser wavelength is sensitive to the environment disturbance. Chromium self-traceable grating is an ideal nanometer length reference grating with pitch traceability, fabricated by the atomic lithography technique. The new nanometer length traceability chain can be established based on the pitch traceability of chromium self-traceable grating, which is often used to calibrate the systematic error of the atomic force microscope. In this paper, the metrological self-mixing grating interferometer based on the chromium self-traceable grating (SMGI-Cr) is firstly established, whose interfere phase is traceable to the pitch of the chromium self-traceable grating directly and traceable to the chromium atomic transition frequency of energy level 7 S 3 to 7 P 4 indirectly. The nanometer displacement measurement is also achieved by the SMGI-Cr. The measurement error is no more than 0.2366%, compared to a commercial interferometer.
△ Less
Submitted 25 June, 2023;
originally announced June 2023.
-
Chromium Self-Traceable Length Standard: Investigating Geometry and Diffraction for Length Traceability Chain
Authors:
Zichao Lin,
Yulin Yao,
Zhangning Xie,
Dongbai Xue,
Tong Zhou,
Zhaohui Tang,
Lihua Lei,
Tao Jin,
Xiong Dun,
Xiao Deng,
Xinbin Cheng,
Tongbao Li
Abstract:
Natural constant-based metrology methods offer an effective approach to achieving traceability in nanometric measurements. The Cr grating, fabricated by atom lithography and featuring a pitch of $d=212.7705\pm0.0049~{\rm nm}$ traceable to the Cr transition frequency $^{7}S_{3}$ $\rightarrow$ $^{7}P_{4}^{0}$, demonstrates potential as a self-traceable length standard in nano-length metrology by gra…
▽ More
Natural constant-based metrology methods offer an effective approach to achieving traceability in nanometric measurements. The Cr grating, fabricated by atom lithography and featuring a pitch of $d=212.7705\pm0.0049~{\rm nm}$ traceable to the Cr transition frequency $^{7}S_{3}$ $\rightarrow$ $^{7}P_{4}^{0}$, demonstrates potential as a self-traceable length standard in nano-length metrology by grating interferometer. This research aims to analyze and engineer the diffraction characteristics that enhance the Cr grating as a self-traceable length standard within the length traceability chain based on the Cr transition frequency. Accordingly, we investigate the geometric morphology and diffraction characteristics of the Cr grating, analyzes the influence of the grating's polarization-sensitive characteristics on the Littrow configuration grating interferometer, and establishes the criteria for Cr grating fabrication. Experimentally, we fabricate an expanded Cr grating by scanning atom lithography, characterize its diffraction performance, and conduct preliminary verification of length measurement in a self-traceable grating interferometer. This work adheres to the international trend of flattened metrology development, offering a valuable reference for advancing subsequent metrological technologies throughout the new traceability chain.
△ Less
Submitted 24 June, 2023;
originally announced June 2023.
-
Length traceability chain based on chromium atom transition frequency
Authors:
Xiao Deng,
Zichao Lin,
Gaoliang Dai,
Zhaohui Tang,
Zhangning Xie,
Guangxu Xiao,
Zhijun Yin,
Lihua Lei,
Tao Jin,
Dongbai Xue,
Zhenjie Gu,
Xinbin Cheng,
Tongbao Li
Abstract:
Precise positioning measurement plays an important role in in today advanced manufacturing industry, and length traceability chain has been optimizing and enriching to fulfill the developing and various precise positioning requirement. In this paper, we propose a new length traceability chain based on chromium atom transition frequency, which is a combining utilization of fundamental physical cons…
▽ More
Precise positioning measurement plays an important role in in today advanced manufacturing industry, and length traceability chain has been optimizing and enriching to fulfill the developing and various precise positioning requirement. In this paper, we propose a new length traceability chain based on chromium atom transition frequency, which is a combining utilization of fundamental physical constant accuracy and grating interferometer environmental robustness. The selftraceable grating pitch standard, the selftraceable angle standard and the selftraceable grating interferometer are promising to improve the measurement accuracy, consistency and selfcalibration ability in situ for precise positioning.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Cascading of Nanomechanical Resonator Logic
Authors:
T. Jin,
C. G. Baker,
E. Romero,
N. P. Mauranyapin,
T. M. F. Hirsch,
W. P. Bowen,
G. I. Harris
Abstract:
Nanomechanical systems have been proposed as an alternative computing platform for high radiation environments, where semiconductor electronics traditionally fail, as well as to allow improved gate densities and energy consumption. While there have been numerous demonstrations of individual nanomechanical logic gates leveraging the Duffing nonlinearity, the development of useful nanomechanical log…
▽ More
Nanomechanical systems have been proposed as an alternative computing platform for high radiation environments, where semiconductor electronics traditionally fail, as well as to allow improved gate densities and energy consumption. While there have been numerous demonstrations of individual nanomechanical logic gates leveraging the Duffing nonlinearity, the development of useful nanomechanical logic circuits depends strongly on the ability to cascade multiple logic gates. Here we show theoretically that cascading nanomechanical logic gates, where the output of one gate is fed into the input of another, is a complex problem due to the transient dynamics of the collective system. These transient behaviours can lead to undesired bit flips, which precludes cascading altogether. We then show that this issue can be circumvented by carefully initialising the system prior to computation. We illustrate these salient features through the modelled dynamics of two cascaded nanomechanical NAND gates.
△ Less
Submitted 5 December, 2022;
originally announced December 2022.
-
Hybrid integration of deterministic quantum dots-based single-photon sources with CMOS-compatible silicon carbide photonics
Authors:
Yifan Zhu,
Wenqi Wei,
Ailun Yi,
Tingting Jin,
Chen Shen,
Xudong Wang,
Liping Zhou,
Chengli Wang,
Weiwen Ou,
Sannian Song,
Ting Wang,
Jianjun Zhang,
Xin Ou,
Jiaxiang Zhang
Abstract:
Thin film 4H-silicon carbide (4H-SiC) is emerging as a contender for realizing large-scale optical quantum circuits due to its high CMOS technology compatibility and large optical nonlinearities. Though, challenges remain in producing wafer-scale 4H-SiC thin film on insulator (4H-SiCOI) for dense integration of photonic circuits, and in efficient coupling of deterministic quantum emitters that are…
▽ More
Thin film 4H-silicon carbide (4H-SiC) is emerging as a contender for realizing large-scale optical quantum circuits due to its high CMOS technology compatibility and large optical nonlinearities. Though, challenges remain in producing wafer-scale 4H-SiC thin film on insulator (4H-SiCOI) for dense integration of photonic circuits, and in efficient coupling of deterministic quantum emitters that are essential for scalable quantum photonics. Here we demonstrate hybrid integration of self-assembled InGaAs quantum dots (QDs) based single-photon sources (SPSs) with wafer-scale 4H-SiC photonic chips prepared by ion slicing technique. By designing a bilayer vertical coupler, we realize generation and highly efficient routing of single-photon emission in the hybrid quantum photonic chip. Furthermore, we realize a chip-integrated beamsplitter operation for triggered single photons through fabricating a 1x2 multi-mode interferometer (MMI) with a symmetric power splitting ratio of 50:50. The successful demonstration of heterogeneously integrating QDs-based SPSs on 4H-SiC photonic chip prepared by ion slicing technique constitutes an important step toward CMOS-compatible, fast reconfigurable quantum photonic circuits with deterministic SPSs.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
Ultra-low Power Domain Wall Device for Spin-based Neuromorphic Computing
Authors:
Durgesh Kumar,
Chung Hong Jing,
Chan JianPeng,
Tianli Jin,
Lim Sze Ter,
Rachid Sbiaa,
S. N. Piramanayagam
Abstract:
Neuromorphic computing (NC) is gaining wide acceptance as a potential technology to achieve low-power intelligent devices. To realize NC, researchers investigate various types of synthetic neurons and synaptic devices such as memristors and spintronic domain wall (DW) devices. In comparison, DW-based neurons and synapses have potentially higher endurance. However, for realizing low-power devices,…
▽ More
Neuromorphic computing (NC) is gaining wide acceptance as a potential technology to achieve low-power intelligent devices. To realize NC, researchers investigate various types of synthetic neurons and synaptic devices such as memristors and spintronic domain wall (DW) devices. In comparison, DW-based neurons and synapses have potentially higher endurance. However, for realizing low-power devices, DW motion at low energies - typically below pJ/bit - are needed. Here, we demonstrate domain wall motion at current densities as low as 1E6 A/m2 by tailoring the beta-W spin Hall material. With our design, we achieve ultra-low pinning fields and current density reduction by a factor of 10000. The energy required to move the domain wall by a distance of about 20 micrometers is 0.4 fJ, which translates into energy consumption of 0.4 aJ/bit for a bit-length of 20 nm. With a meander domain wall device configuration, we have established a controlled DW motion for synapse applications and have shown the direction to make ultra-low energy spin-based neuromorphic elements.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
Data-driven Uncertainty Quantification for Systematic Coarse-grained Models
Authors:
Tangxin Jin,
Anthony Chazirakis,
Evangelia Kalligiannaki,
Vagelis Harmandaris,
Markos A. Katsoulakis
Abstract:
In this work, we present methodologies for the quantification of confidence in bottom-up coarse-grained models for molecular and macromolecular systems. Coarse-graining methods have been extensively used in the past decades in order to extend the length and time scales accessible by simulation methodologies. The quantification, though, of induced errors due to the limited availability of fine-grai…
▽ More
In this work, we present methodologies for the quantification of confidence in bottom-up coarse-grained models for molecular and macromolecular systems. Coarse-graining methods have been extensively used in the past decades in order to extend the length and time scales accessible by simulation methodologies. The quantification, though, of induced errors due to the limited availability of fine-grained data is not yet established. Here, we employ rigorous statistical methods to deduce guarantees for the optimal coarse models obtained via approximations of the multi-body potential of mean force, with the relative entropy, the relative entropy rate minimization, and the force matching methods. Specifically, we present and apply statistical approaches, such as bootstrap and jackknife, to infer confidence sets for a limited number of samples, i.e., molecular configurations. Moreover, we estimate asymptotic confidence intervals assuming adequate sampling of the phase space. We demonstrate the need for non-asymptotic methods and quantify confidence sets through two applications. The first is a two-scale fast/slow diffusion process projected on the slow process. With this benchmark example, we establish the methodology for both independent and time-series data. Second, we apply these uncertainty quantification approaches on a polymeric bulk system. We consider an atomistic polyethylene melt as the prototype system for developing coarse-graining tools for macromolecular systems. For this system, we estimate the coarse-grained force field and present confidence levels with respect to the number of available microscopic data.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Thickness-Controlled Black Phosphorus Tunnel Field-Effect Transistor for Low Power Switches
Authors:
Seungho Kim,
Gyuho Myeong,
Wongil Shin,
Hongsik Lim,
Boram Kim,
Taehyeok Jin,
Sungjin Chang,
Kenji Watanabe,
Takashi Taniguchi,
Sungjae Cho
Abstract:
The continuous down-scaling of transistors has been the key to the successful development of current information technology. However, with Moore's law reaching its limits, the development of alternative transistor architectures is urgently needed. Transistors require a switching voltage of at least 60 mV for each tenfold increase in current, that is, a subthreshold swing (SS) of 60 mV per decade (…
▽ More
The continuous down-scaling of transistors has been the key to the successful development of current information technology. However, with Moore's law reaching its limits, the development of alternative transistor architectures is urgently needed. Transistors require a switching voltage of at least 60 mV for each tenfold increase in current, that is, a subthreshold swing (SS) of 60 mV per decade (dec). Alternative tunnel field-effect transistors (TFETs) are widely studied to achieve a sub-thermionic SS and high I60 (the current where SS becomes 60 mV/dec). Heterojunction (HJ) TFETs show promise for delivering a high I60, but experimental results do not meet theoretical expectations due to interface problems in the HJs constructed from different materials. Here, we report a natural HJ-TFET with spatially varying layer thickness in black phosphorus without interface problems. We achieved record-low average SS values over 4-5 dec of current (SSave_4dec = ~22.9 mV/dec and SSave_5dec = ~26.0 mV/dec) with record-high I60 (I60 = 0.65-1 uA/um), paving the way for application in low-power switches.
△ Less
Submitted 21 January, 2020;
originally announced January 2020.
-
Towards electrically driven organic semiconductor laser with field-effective transistor structure
Authors:
Thangavel Kanagasekaran,
Hidekazu Shimotani,
Keiichiro Kasai,
Shun Onuki,
Rahul D. Kavthe,
Ryotaro Kumashiro,
Nobuya Hiroshiba,
Tienan Jin,
Naoki Asao,
Katsumi Tanigaki
Abstract:
Laser is one of the most important discoveries in the 20th century, and inorganic semiconductor lasers (ISCL) are most frequently used in many applications nowadays. Organic semiconductor lasers (OSCL) have many attractive features when they compared to ISCLs, such as flexibility, human friendliness, feasible and inexpensive production process, light weight, and multicolor emission. However, elect…
▽ More
Laser is one of the most important discoveries in the 20th century, and inorganic semiconductor lasers (ISCL) are most frequently used in many applications nowadays. Organic semiconductor lasers (OSCL) have many attractive features when they compared to ISCLs, such as flexibility, human friendliness, feasible and inexpensive production process, light weight, and multicolor emission. However, electrically driven OSCLs (el-OSCL) have not yet been realized, although they are possible in an optically driven mode. Here, we report that an el-OSCL can be realized in field-effect transistor (FET) structure. The FET el-OSCL with distributed feedback (DFB) construction is made using a BP3T single crystal as a lasing medium electrostatically laminated on a silicon substrate modified with periodically patterned polystyrene. An emergent sharp-linewidth emission spectrum to the resolution limit of a detector and a non-linear increase in intensity above the threshold current density of ca. 1 kA cm-2 was observed, being indicative of lasing. Discussions on the possible realization of lasing in el-OSCLs can be made from the comparison between optical and electrical-driven mode.
△ Less
Submitted 25 March, 2019; v1 submitted 21 March, 2019;
originally announced March 2019.
-
Treatment of solid objects in the Pencil Code using an immersed boundary method and overset grids
Authors:
Jørgen R. Aarnes,
Tai Jin,
Chaoli Mao,
Nils E. L. Haugen,
Kun Luo,
Helge I. Andersson
Abstract:
Two methods for solid body representation in flow simulations available in the Pencil Code are the immersed boundary method and overset grids. These methods are quite different in terms of computational cost, flexibility and numerical accuracy. We present here an investigation of the use of the different methods with the purpose of assessing their strengths and weaknesses. At present, the overset…
▽ More
Two methods for solid body representation in flow simulations available in the Pencil Code are the immersed boundary method and overset grids. These methods are quite different in terms of computational cost, flexibility and numerical accuracy. We present here an investigation of the use of the different methods with the purpose of assessing their strengths and weaknesses. At present, the overset grid method in the Pencil Code can only be used for representing cylinders in the flow. For this task it surpasses the immersed boundary method in yielding highly accurate solutions at moderate computational costs. This is partly due to local grid stretching and a body-conformal grid, and partly due to the possibility of working with local time step restrictions on different grids. The immersed boundary method makes up the lack of computational efficiency with flexibility in regards to application to complex geometries, due to a recent extension of the method that allows our implementation of it to represent arbitrarily shaped objects in the flow.
△ Less
Submitted 18 June, 2018;
originally announced June 2018.
-
Precision requirements and innovative manufacturing for ultrahigh precision laser interferometry of gravitational-wave astronomy
Authors:
Wei-Tou Ni,
Sen Han,
Tao Jin
Abstract:
With the LIGO announcement of the first direct detection of gravitational waves (GWs), the GW Astronomy was formally ushered into our age. After one-hundred years of theoretical investigation and fifty years of experimental endeavor, this is a historical landmark not just for physics and astronomy, but also for industry and manufacturing. The challenge and opportunity for industry is precision and…
▽ More
With the LIGO announcement of the first direct detection of gravitational waves (GWs), the GW Astronomy was formally ushered into our age. After one-hundred years of theoretical investigation and fifty years of experimental endeavor, this is a historical landmark not just for physics and astronomy, but also for industry and manufacturing. The challenge and opportunity for industry is precision and innovative manufacturing in large size - production of large and homogeneous optical components, optical diagnosis of large components, high reflectance dielectric coating on large mirrors, manufacturing of components for ultrahigh vacuum of large volume, manufacturing of high attenuating vibration isolation system, production of high-power high-stability single-frequency lasers, production of high-resolution positioning systems etc. In this talk, we address the requirements and methods to satisfy these requirements. Optical diagnosis of large optical components requires large phase-shifting interferometer; the 1.06 μm Phase Shifting Interferometer for testing LIGO optics is an example. High quality mirrors are crucial for laser interferometric GW detection, so as for ring laser gyroscope, high precision laser stabilization via optical cavities, quantum optomechanics, cavity quantum electrodynamics and vacuum birefringence measurement. There are stringent requirements on the substrate materials and coating methods. For cryogenic GW interferometer, appropriate coating on sapphire or silicon are required for good thermal and homogeneity properties. Large ultrahigh vacuum components and high attenuating vibration system together with an efficient metrology system are required and will be addressed. For space interferometry, drag-free technology is well-developed; weak-light phase locking is demonstrated in the laboratories while weak-light manipulation technology still needs developments.
△ Less
Submitted 11 October, 2016;
originally announced October 2016.
-
A Global Algorithm for Training Multilayer Neural Networks
Authors:
Hong Zhao,
Tao Jin
Abstract:
We present a global algorithm for training multilayer neural networks in this Letter. The algorithm is focused on controlling the local fields of neurons induced by the input of samples by random adaptations of the synaptic weights. Unlike the backpropagation algorithm, the networks may have discrete-state weights, and may apply either differentiable or nondifferentiable neural transfer function…
▽ More
We present a global algorithm for training multilayer neural networks in this Letter. The algorithm is focused on controlling the local fields of neurons induced by the input of samples by random adaptations of the synaptic weights. Unlike the backpropagation algorithm, the networks may have discrete-state weights, and may apply either differentiable or nondifferentiable neural transfer functions. A two-layer network is trained as an example to separate a linearly inseparable set of samples into two categories, and its powerful generalization capacity is emphasized. The extension to more general cases is straightforward.
△ Less
Submitted 6 July, 2006;
originally announced July 2006.