-
Hyperpixels: Pixel Filter Arrays of Multivariate Optical Elements for Optimized Spectral Imaging
Authors:
Calum Williams,
Richard Cousins,
Christopher J. Mellor,
Sarah E. Bohndiek,
George S. D. Gordon
Abstract:
We introduce the concept of `hyperpixels' in which each element of a pixel filter array (suitable for CMOS image sensor integration) has a spectral transmission tailored to a target spectral component expected in application-specific scenes. These are analogous to arrays of multivariate optical elements that could be used for sensing specific analytes. Spectral tailoring is achieved by engineering…
▽ More
We introduce the concept of `hyperpixels' in which each element of a pixel filter array (suitable for CMOS image sensor integration) has a spectral transmission tailored to a target spectral component expected in application-specific scenes. These are analogous to arrays of multivariate optical elements that could be used for sensing specific analytes. Spectral tailoring is achieved by engineering the heights of multiple sub-pixel Fabry-Perot resonators that cover each pixel area. We first present a design approach for hyperpixels, based on a matched filter concept and, as an exemplar, design a set of 4 hyperpixels tailored to optimally discriminate between 4 spectral reflectance targets. Next, we fabricate repeating 2x2 pixel filter arrays of these designs, alongside repeating 2x2 arrays of an optimal bandpass filters, perform both spectral and imaging characterization. Experimentally measured hyperpixel transmission spectra show a 2.4x reduction in unmixing matrix condition number (p=0.031) compared to the optimal band-pass set. Imaging experiments using the filter arrays with a monochrome sensor achieve a 3.47x reduction in unmixing matrix condition number (p=0.020) compared to the optimal band-pass set. This demonstrates the utility of the hyperpixel approach and shows its superiority even over the optimal bandpass case. We expect that with further improvements in design and fabrication processes increased performance may be obtained. Because the hyperpixels are straightforward to customize, fabricate and can be placed atop monochrome sensors, this approach is highly versatile and could be adapted to a wide range of real-time imaging applications which are limited by low SNR including micro-endoscopy, capsule endoscopy, industrial inspection and machine vision.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Single- and multi-layer micro-scale diffractive lens fabrication for fiber imaging probes with versatile depth-of-field
Authors:
Fei He,
Rafael Fuentes-Dominguez,
Richard Cousins,
Christopher J. Mellor,
Jennifer K. Barton,
George S. D. Gordon
Abstract:
Hair-thin optical fiber endoscopes have opened up new paradigms for advanced imaging applications in vivo. In certain applications, such as optical coherence tomography (OCT), light-shaping structures may be required on fiber facets to generate needle-like Bessel beams with large depth-of-field, while in others shorter depths of field with high lateral resolutions are preferable. In this paper, we…
▽ More
Hair-thin optical fiber endoscopes have opened up new paradigms for advanced imaging applications in vivo. In certain applications, such as optical coherence tomography (OCT), light-shaping structures may be required on fiber facets to generate needle-like Bessel beams with large depth-of-field, while in others shorter depths of field with high lateral resolutions are preferable. In this paper, we demonstrate a novel method to fabricate light-shaping structures on optical fibres, achieved via bonding encapsulated planar diffractive lenses onto fiber facets. Diffractive metallic structures have the advantages of being simple to design, fabricate and transfer, and our encapsulation approach is scalable to multi-layer stacks. As a demonstration, we design and transfer a Fresnel zone plate and a diffractive axicon onto fiber facets, and show that the latter device generates a needle-like Bessel beam with 350 mu m focal depth. We also evaluate the imaging performance of both devices and show that the axicon fiber is able to maintain focussed images of a USAF resolution target over a 150 mu m distance. Finally, we fabricate a two-layer stack of Fresnel zone plates on a fiber and characterise the modified beam profile and demonstrate good imaging performance. We anticipate our fabrication approach could enable multi-functional complex optical structures (e.g. using plasmonics, polarization control) to be integrated onto fibers for ultra-thin advanced imaging and sensing.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
Ultra-miniature dual-wavelength spatial frequency domain imaging for micro-endoscopy
Authors:
Jane Crowley,
George S. D. Gordon
Abstract:
There is a need for a cost-effective, quantitative imaging tool that can be deployed endoscopically to better detect early stage gastrointestinal cancers. Spatial frequency domain imaging (SFDI) is a low-cost imaging technique that produces near-real time, quantitative maps of absorption and reduced scattering coefficients, but most implementations are bulky and suitable only for use outside the b…
▽ More
There is a need for a cost-effective, quantitative imaging tool that can be deployed endoscopically to better detect early stage gastrointestinal cancers. Spatial frequency domain imaging (SFDI) is a low-cost imaging technique that produces near-real time, quantitative maps of absorption and reduced scattering coefficients, but most implementations are bulky and suitable only for use outside the body. We present an ultra-miniature SFDI system comprised of an optical fiber array (diameter $0.125$ mm) and a micro camera ($1\times1$ mm package) displacing conventionally bulky components, in particular the projector. The prototype has outer diameter $3$ mm, but the individual components dimensions could permit future packaging to $<1.5$ mm diameter. We develop a phase-tracking algorithm to rapidly extract images with fringe projections at $3$ equispaced phase shifts in order to perform SFDI demodulation. To validate performance, we first demonstrate comparable recovery of quantitative optical properties between our ultra-miniature system and a conventional bench-top SFDI system with agreement of $15$\% and $6$\% for absorption and reduced scattering respectively. Next, we demonstrate imaging of absorption and reduced scattering of tissue-mimicking phantoms providing enhanced contrast between simulated tissue types (healthy and tumour), done simultaneously at wavelengths of $515$ nm and $660$ nm. This device shows promise as a cost-effective, quantitative imaging tool to detect variations in optical absorption and scattering as indicators of cancer.
△ Less
Submitted 3 October, 2023; v1 submitted 6 June, 2023;
originally announced June 2023.
-
Single-ended Recovery of Optical fiber Transmission Matrices using Neural Networks
Authors:
Yijie Zheng,
George S. D. Gordon
Abstract:
Ultra-thin multimode optical fiber imaging promises next-generation medical endoscopes reaching high image resolution for deep tissues. However, current technology suffers from severe optical distortion, as the fiber's calibration is sensitive to bending and temperature and thus requires in vivo re-measurement with access to a single end only. We present a neural network (NN)-based approach to rec…
▽ More
Ultra-thin multimode optical fiber imaging promises next-generation medical endoscopes reaching high image resolution for deep tissues. However, current technology suffers from severe optical distortion, as the fiber's calibration is sensitive to bending and temperature and thus requires in vivo re-measurement with access to a single end only. We present a neural network (NN)-based approach to reconstruct the fiber's transmission matrix (TM) based on multi-wavelength reflection-mode measurements. We train two different NN architectures via a custom loss function insensitive to global phase-degeneracy: a fully connected NN and convolutional U-Net. We reconstruct the 64 $\times$ 64 complex-valued fiber TMs through a simulated single-ended optical fiber with $\leq$ 4\% error and cross-validate on experimentally measured TMs, demonstrating both wide-field and confocal scanning image reconstruction with small error. Our TM recovery approach is 4500 times faster, is more robust to fiber perturbation during characterization, and operates with non-square TMs.
△ Less
Submitted 3 October, 2023; v1 submitted 31 March, 2023;
originally announced March 2023.
-
HoloGen: An open source toolbox for high-speed hologram generation
Authors:
Peter J. Christopher,
Andrew Kadis,
George S. D. Gordon,
Timothy D. Wilkinson
Abstract:
The rise of mixed reality systems such as Microsoft HoloLens has prompted an increase in interest in the fields of 2D and 3D holography. Already applied in fields including telecommunications, imaging, projection, lithography, beam shaping and optical tweezing, Computer Generated Holography (CGH) offers an exciting approach to a wide range of light shaping problems. The numerical processing requir…
▽ More
The rise of mixed reality systems such as Microsoft HoloLens has prompted an increase in interest in the fields of 2D and 3D holography. Already applied in fields including telecommunications, imaging, projection, lithography, beam shaping and optical tweezing, Computer Generated Holography (CGH) offers an exciting approach to a wide range of light shaping problems. The numerical processing required to generate a hologram is high and requires significant domain expertise. This has historically slowed the adoption of holographic techniques in emerging fields. In this paper we present HoloGen, an open-source Cuda C and C ++ framework for computer generated holography. HoloGen unites, for the first time, a wide array of existing hologram generation algorithms with state of the art performance while attempting to remain intuitive and easy to use. This is enabled by a C # and Windows Presentation Framework (WPF) graphical user interface (GUI). A novel reflection based parameter hierarchy is used to ensure ease of modification. Extensive use of C ++ templates based on the Standard Template Library (STL), compile time flexibility is preserved while maintaining runtime performance. The current release of HoloGen unites implementations of well known generation algorithms including Gerchberg-Saxton (GS), Liu-Taghizadeh (LT), Direct Search (DS), Simulated Annealing (SA) and One-Step Phase-Retrieval (OSPR) with less known specialist variants including Weighted GS and Adaptive OSPR. Benchmarking results are presented for several key algorithms. The software is freely available under an MIT license.
△ Less
Submitted 27 September, 2021; v1 submitted 24 August, 2020;
originally announced August 2020.
-
Holographic Predictive Search: Extending the Scope
Authors:
Peter J. Christopher,
Ralf Mouthaan,
George S. D. Gordon,
Timothy D. Wilkinson
Abstract:
Holographic Predictive Search (HPS) is a novel approach to search-based hologram generation that uses a mathematical understanding of the optical transforms to make informed optimisation decisions. Existing search techniques such as Direct Search (DS) and Simulated Annealing (SA) rely on trialling modifications to a test hologram and observing the results. A formula is used to decide whether the c…
▽ More
Holographic Predictive Search (HPS) is a novel approach to search-based hologram generation that uses a mathematical understanding of the optical transforms to make informed optimisation decisions. Existing search techniques such as Direct Search (DS) and Simulated Annealing (SA) rely on trialling modifications to a test hologram and observing the results. A formula is used to decide whether the change should be accepted. HPS operates presciently, using knowledge of the underlying mathematical relationship to make exact changes to the test hologram that guarantee the 'best' outcome for that change. In this work, we extend the scope of the original research to cover both phase and amplitude modulating Spatial Light Modulators (SLMs), both phase sensitive and phase insensitive systems and both Fresnel and Fraunhofer diffraction. In the cases discussed, improvements of up to 10x are observed in final error and the approach also offers significant performance benefits in generation time. This comes at the expense of increased complexity and loss of generality.
△ Less
Submitted 24 August, 2020;
originally announced August 2020.
-
Benchmarking the Gerchberg-Saxton Algorithm
Authors:
Peter J. Christopher,
George S. D. Gordon,
Timothy D. Wilkinson
Abstract:
Due to the proliferation of spatial light modulators, digital holography is finding wide-spread use in fields from augmented reality to medical imaging to additive manufacturing to lithography to optical tweezing to telecommunications. There are numerous types of SLM available with a multitude of algorithms for generating holograms. Each algorithm has limitations in terms of convergence speed, pow…
▽ More
Due to the proliferation of spatial light modulators, digital holography is finding wide-spread use in fields from augmented reality to medical imaging to additive manufacturing to lithography to optical tweezing to telecommunications. There are numerous types of SLM available with a multitude of algorithms for generating holograms. Each algorithm has limitations in terms of convergence speed, power efficiency, accuracy and data storage requirement.
Here, we consider probably the most common algorithm for computer generated holography - Gerchberg-Saxton - and examine the trade-off in convergent quality, performance and efficiency. In particular, we focus on measuring and understanding the factors that control runtime and convergence.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
In-flight performance of the LEKIDs of the OLIMPO experiment
Authors:
A. Paiella,
P. A. R. Ade,
E. S. Battistelli,
M. G. Castellano,
I. Colantoni,
F. Columbro,
A. Coppolecchia,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
S. Gordon,
L. Lamagna,
C. Magneville,
S. Masi,
P. Mauskopf,
G. Pettinari,
F. Piacentini,
G. Pisano,
G. Polenta,
G. Presta,
E. Tommasi,
C. Tucker,
V. Vdovin,
A. Volpe,
D. Yvon
Abstract:
We describe the in-flight performance of the horn-coupled Lumped Element Kinetic Inductance Detector arrays of the balloon-borne OLIMPO experiment. These arrays have been designed to match the spectral bands of OLIMPO: 150, 250, 350, and 460 GHz, and they have been operated at 0.3 K and at an altitude of 37.8 km during the stratospheric flight of the OLIMPO payload, in Summer 2018. During the firs…
▽ More
We describe the in-flight performance of the horn-coupled Lumped Element Kinetic Inductance Detector arrays of the balloon-borne OLIMPO experiment. These arrays have been designed to match the spectral bands of OLIMPO: 150, 250, 350, and 460 GHz, and they have been operated at 0.3 K and at an altitude of 37.8 km during the stratospheric flight of the OLIMPO payload, in Summer 2018. During the first hours of flight, we tuned the detectors and verified their large dynamics under the radiative background variations due to elevation increase of the telescope and to the insertion of the plug-in room-temperature differential Fourier transform spectrometer into the optical chain. We have found that the detector noise equivalent powers are close to be photon-noise limited and lower than those measured on the ground. Moreover, the data contamination due to primary cosmic rays hitting the arrays is less than 3% for all the pixels of all the arrays, and less than 1% for most of the pixels. These results can be considered the first step of KID technology validation in a representative space environment.
△ Less
Submitted 10 February, 2020;
originally announced February 2020.
-
Characterising optical fibre transmission matrices using metasurface reflector stacks for lensless imaging without distal access
Authors:
George S. D. Gordon,
Milana Gataric,
Alberto Gil C. P. Ramos,
Ralf Mouthaan,
Calum Williams,
Jonghee Yoon,
Timothy D. Wilkinson,
Sarah E. Bohndiek
Abstract:
The ability to form images through hair-thin optical fibres promises to open up new applications from biomedical imaging to industrial inspection. Unfortunately, deployment has been limited because small changes in mechanical deformation (e.g. bending) and temperature can completely scramble optical information, distorting images. Since such changes are dynamic, correcting them requires measuremen…
▽ More
The ability to form images through hair-thin optical fibres promises to open up new applications from biomedical imaging to industrial inspection. Unfortunately, deployment has been limited because small changes in mechanical deformation (e.g. bending) and temperature can completely scramble optical information, distorting images. Since such changes are dynamic, correcting them requires measurement of the fibre transmission matrix (TM) in situ immediately before imaging. TM calibration typically requires access to both the proximal and distal facets of the fibre simultaneously, which is not feasible during most realistic usage scenarios without compromising the thin form factor with bulky distal optics. Here, we introduce a new approach to determine the TM of multi-mode fibre (MMF) or multi-core fibre (MCF) in a reflection-mode configuration without access to the distal facet. A thin stack of structured metasurface reflectors is used at the distal facet to introduce wavelength-dependent, spatially heterogeneous reflectance profiles. We derive a first-order fibre model that compensates these wavelength-dependent changes in the TM and show that, consequently, the reflected data at 3 wavelengths can be used to unambiguously reconstruct the full TM by an iterative optimisation algorithm. We then present a method for sample illumination and imaging following TM reconstruction. Unlike previous approaches, our method does not require the TM to be unitary making it applicable to physically realistic fibre systems. We demonstrate TM reconstruction and imaging first using simulated non-unitary fibres and noisy reflection matrices, then using much larger experimentally-measured TMs of a densely-packed MCF, and finally on an experimentally-measured multi-wavelength set of TMs recorded from a MMF. Our findings pave the way for online transmission matrix calibration in situ in hair-thin optical fibres
△ Less
Submitted 5 April, 2019; v1 submitted 4 April, 2019;
originally announced April 2019.
-
Kinetic Inductance Detectors and readout electronics for the OLIMPO experiment
Authors:
A. Paiella,
E. S. Battistelli,
M. G. Castellano,
I. Colantoni,
F. Columbro,
A. Coppolecchia,
G. D'Alessandro,
P. de Bernardis,
S. Gordon,
L. Lamagna,
H. Mani,
S. Masi,
P. Mauskopf,
G. Pettinari,
F. Piacentini,
G. Presta
Abstract:
Kinetic Inductance Detectors (KIDs) are superconductive low$-$temperature detectors useful for astrophysics and particle physics. We have developed arrays of lumped elements KIDs (LEKIDs) sensitive to microwave photons, optimized for the four horn-coupled focal planes of the OLIMPO balloon-borne telescope, working in the spectral bands centered at 150 GHz, 250 GHz, 350 GHz, and 460 GHz. This is ai…
▽ More
Kinetic Inductance Detectors (KIDs) are superconductive low$-$temperature detectors useful for astrophysics and particle physics. We have developed arrays of lumped elements KIDs (LEKIDs) sensitive to microwave photons, optimized for the four horn-coupled focal planes of the OLIMPO balloon-borne telescope, working in the spectral bands centered at 150 GHz, 250 GHz, 350 GHz, and 460 GHz. This is aimed at measuring the spectrum of the Sunyaev-Zel'dovich effect for a number of galaxy clusters, and will validate LEKIDs technology in a space-like environment. Our detectors are optimized for an intermediate background level, due to the presence of residual atmosphere and room--temperature optical system and they operate at a temperature of 0.3 K. The LEKID planar superconducting circuits are designed to resonate between 100 and 600 MHz, and to match the impedance of the feeding waveguides; the measured quality factors of the resonators are in the $10^{4}-10^{5}$ range, and they have been tuned to obtain the needed dynamic range. The readout electronics is composed of a $cold$ $part$, which includes a low noise amplifier, a dc$-$block, coaxial cables, and power attenuators; and a $room-temperature$ $part$, FPGA$-$based, including up and down-conversion microwave components (IQ modulator, IQ demodulator, amplifiers, bias tees, attenuators). In this contribution, we describe the optimization, fabrication, characterization and validation of the OLIMPO detector system.
△ Less
Submitted 3 April, 2019;
originally announced April 2019.
-
Grayscale-to-color: Single-step fabrication of bespoke multispectral filter arrays
Authors:
Calum Williams,
George S. D. Gordon,
Sophia Gruber,
Timothy D. Wilkinson,
Sarah E. Bohndiek
Abstract:
Conventional cameras, such as in smartphones, capture wideband red, green and blue (RGB) spectral components, replicating human vision. Multispectral imaging (MSI) captures spatial and spectral information beyond our vision but typically requires bulky optical components and is expensive. Snapshot multispectral image sensors have been proposed as a key enabler for a plethora of MSI applications, f…
▽ More
Conventional cameras, such as in smartphones, capture wideband red, green and blue (RGB) spectral components, replicating human vision. Multispectral imaging (MSI) captures spatial and spectral information beyond our vision but typically requires bulky optical components and is expensive. Snapshot multispectral image sensors have been proposed as a key enabler for a plethora of MSI applications, from diagnostic medical imaging to remote sensing. To achieve low-cost and compact designs, spatially variant multispectral filter arrays (MSFAs) based on thin-film optical components are deposited atop image sensors. Conventional MSFAs achieve spectral filtering through either multi-layer stacks or pigment, requiring: complex mixtures of materials; additional lithographic steps for each additional wavelength; and large thicknesses to achieve high transmission efficiency. By contrast, we show here for the first time a single-step grayscale lithographic process that enables fabrication of bespoke MSFAs based on the Fabry-Perot resonances of spatially variant metal-insulator-metal (MIM) cavities, where the exposure dose controls insulator (cavity) thickness. We demonstrate customizable MSFAs scalable up to N-wavelength bands spanning the visible and near-infrared with high transmission efficiency (~75%) and narrow linewidths (~50 nm). Using this technique, we achieve multispectral imaging of several spectrally distinct target using our bespoke MIM-MSFAs fitted to a monochrome CMOS image sensor. Our unique framework provides an attractive alternative to conventional MSFA manufacture, by reducing both fabrication complexity and cost of these intricate optical devices, while increasing customizability.
△ Less
Submitted 27 January, 2019;
originally announced January 2019.
-
Quantitative phase and polarisation endoscopy applied to detection of early oesophageal tumourigenesis
Authors:
George S. D. Gordon,
James Joseph,
Maria P. Alcolea,
Travis Sawyer,
Alexander J. Macfaden,
Calum Williams,
Catherine R. M. Fitzpatrick,
Philip H. Jones,
Massimiliano di Pietro,
Rebecca C. Fitzgerald,
Timothy D. Wilkinson,
Sarah E. Bohndiek
Abstract:
Phase and polarisation of coherent light are highly perturbed by interaction with microstructural changes in pre-malignant tissue, holding promise for label-free early cancer detection in endoscopically accessible tissues such as the gastrointestinal tract. Flexible optical fibres used in conventional diagnostic endoscopy scramble phase and polarisation, restricting clinicians instead to low-contr…
▽ More
Phase and polarisation of coherent light are highly perturbed by interaction with microstructural changes in pre-malignant tissue, holding promise for label-free early cancer detection in endoscopically accessible tissues such as the gastrointestinal tract. Flexible optical fibres used in conventional diagnostic endoscopy scramble phase and polarisation, restricting clinicians instead to low-contrast amplitude-only imaging. Here, we unscramble phase and polarisation images by exploiting the near-diagonal multi-core fibre (MCF) transmission matrix to create a novel parallelised fibre characterisation architecture, scalable to arbitrary MCFs without additional experimental overhead. Our flexible MCF holographic endoscope produces full-field en-face images of amplitude, quantitative phase and resolved polarimetric properties using a low-cost laser diode and camera. We demonstrate that recovered phase enables computational re-focusing at working distances up to 1mm over a field-of-view up to 750$\times$750 $μm^2$. Furthermore, we demonstrate that the spatial distribution of phase and polarisation information enables label-free visualisation of early tumours in oesophageal mouse issue that are not identifiable using conventional amplitude-only information, a milestone towards future application for early cancer detection in endoscopy.
△ Less
Submitted 9 November, 2018;
originally announced November 2018.
-
Kinetic Inductance Detectors for the OLIMPO experiment: design and pre-flight characterization
Authors:
A. Paiella,
A. Coppolecchia,
L. Lamagna,
P. A. R. Ade,
E. S. Battistelli,
M. G. Castellano,
I. Colantoni,
F. Columbro,
G. D'Alessandro,
P. de Bernardis,
S. Gordon,
S. Masi,
P. Mauskopf,
G. Pettinari,
F. Piacentini,
G. Pisano,
G. Presta,
C. Tucker
Abstract:
We designed, fabricated, and characterized four arrays of horn--coupled, lumped element kinetic inductance detectors (LEKIDs), optimized to work in the spectral bands of the balloon-borne OLIMPO experiment. OLIMPO is a 2.6 m aperture telescope, aimed at spectroscopic measurements of the Sunyaev-Zel'dovich (SZ) effect. OLIMPO will also validate the LEKID technology in a representative space environ…
▽ More
We designed, fabricated, and characterized four arrays of horn--coupled, lumped element kinetic inductance detectors (LEKIDs), optimized to work in the spectral bands of the balloon-borne OLIMPO experiment. OLIMPO is a 2.6 m aperture telescope, aimed at spectroscopic measurements of the Sunyaev-Zel'dovich (SZ) effect. OLIMPO will also validate the LEKID technology in a representative space environment. The corrected focal plane is filled with diffraction limited horn-coupled KID arrays, with 19, 37, 23, 41 active pixels respectively at 150, 250, 350, and 460$\:$GHz. Here we report on the full electrical and optical characterization performed on these detector arrays before the flight. In a dark laboratory cryostat, we measured the resonator electrical parameters, such as the quality factors and the electrical responsivities, at a base temperature of 300$\:$mK. The measured average resonator $Q$s are 1.7$\times{10^4}$, 7.0$\times{10^4}$, 1.0$\times{10^4}$, and 1.0$\times{10^4}$ for the 150, 250, 350, and 460$\:$GHz arrays, respectively. The average electrical phase responsivities on resonance are 1.4$\:$rad/pW, 1.5$\:$rad/pW, 2.1$\:$rad/pW, and 2.1$\:$rad/pW; the electrical noise equivalent powers are 45$\:\rm{aW/\sqrt{Hz}}$, 160$\:\rm{aW/\sqrt{Hz}}$, 80$\:\rm{aW/\sqrt{Hz}}$, and 140$\:\rm{aW/\sqrt{Hz}}$, at 12 Hz. In the OLIMPO cryostat, we measured the optical properties, such as the noise equivalent temperatures (NET) and the spectral responses. The measured NET$_{\rm RJ}$s are $200\:μ\rm{K\sqrt{s}}$, $240\:μ\rm{K\sqrt{s}}$, $240\:μ\rm{K\sqrt{s}}$, and $\:340μ\rm{K\sqrt{s}}$, at 12 Hz; under 78, 88, 92, and 90 mK Rayleigh-Jeans blackbody load changes respectively for the 150, 250, 350, and 460 GHz arrays. The spectral responses were characterized with the OLIMPO differential Fourier transform spectrometer (DFTS) up to THz frequencies, with a resolution of 1.8 GHz.
△ Less
Submitted 3 April, 2019; v1 submitted 1 October, 2018;
originally announced October 2018.
-
Reconstruction of optical vector-fields with applications in endoscopic imaging
Authors:
Milana Gataric,
George S. D. Gordon,
Francesco Renna,
Alberto Gil C. P. Ramos,
Maria P. Alcolea,
Sarah E. Bohndiek
Abstract:
We introduce a framework for the reconstruction of the amplitude, phase and polarisation of an optical vector-field using calibration measurements acquired by an imaging device with an unknown linear transformation. By incorporating effective regularisation terms, this new approach is able to recover an optical vector-field with respect to an arbitrary representation system, which may be different…
▽ More
We introduce a framework for the reconstruction of the amplitude, phase and polarisation of an optical vector-field using calibration measurements acquired by an imaging device with an unknown linear transformation. By incorporating effective regularisation terms, this new approach is able to recover an optical vector-field with respect to an arbitrary representation system, which may be different from the one used in calibration. In particular, it enables the recovery of an optical vector-field with respect to a Fourier basis, which is shown to yield indicative features of increased scattering associated with tissue abnormalities. We demonstrate the effectiveness of our approach using synthetic holographic images as well as biological tissue samples in an experimental setting where measurements of an optical vector-field are acquired by a fibre endoscope, and observe that indeed the recovered Fourier coefficients are useful in distinguishing healthy tissues from lesions in early stages of oesophageal cancer.
△ Less
Submitted 18 July, 2018; v1 submitted 27 April, 2018;
originally announced April 2018.
-
Energy dependent stereodynamics of the Ne($^3$P$_2$)+Ar reaction
Authors:
Sean D. S. Gordon,
Junwen Zou,
Silvia Tanteri,
Justin Jankunas,
Andreas Osterwalder
Abstract:
The stereodynamics of the Ne($^3$P$_2$)+Ar Penning and Associative ionization reactions have been studied using a crossed molecular beam apparatus. The experiment uses a curved magnetic hexapole to polarise the Ne($^3$P$_2$) which is then oriented with a shaped magnetic field in the region where it intersects with a beam of Ar($^1$S). The ratios of Penning to associative ionization were recorded o…
▽ More
The stereodynamics of the Ne($^3$P$_2$)+Ar Penning and Associative ionization reactions have been studied using a crossed molecular beam apparatus. The experiment uses a curved magnetic hexapole to polarise the Ne($^3$P$_2$) which is then oriented with a shaped magnetic field in the region where it intersects with a beam of Ar($^1$S). The ratios of Penning to associative ionization were recorded over a range of collision energies from 320 cm$^{-1}$ to 500 cm$^{-1}$ and the data was used to obtain $Ω$ state dependent reactivities for the two reaction channels. These reactivities were found to compare favourably to those predicted in the theoretical work of Brumer et al.
△ Less
Submitted 18 July, 2017;
originally announced July 2017.
-
An Open Source, FPGA-based LeKID readout for BLAST-TNG: Pre-flight Results
Authors:
Samuel Gordon,
Bradley Dober,
Adrian Sinclair,
Samuel Rowe,
Sean Bryan,
Philip Mauskopf,
Jason Austermann,
Mark Devlin,
Simon Dicker,
Jiansong Gao,
Gene C. Hilton,
Johannes Hubmayr,
Glenn Jones,
Jeffrey Klein,
Nathan P. Lourie,
Christopher McKenney,
Federico Nati,
Juan D. Soler,
Matthew Strader,
Michael Vissers
Abstract:
We present a highly frequency multiplexed readout for large-format superconducting detector arrays intended for use in the next generation of balloon-borne and space-based sub-millimeter and far-infrared missions. We will demonstrate this technology on the upcoming NASA Next Generation Balloon-borne Large Aperture Sub-millimeter Telescope (BLAST-TNG) to measure the polarized emission of Galactic d…
▽ More
We present a highly frequency multiplexed readout for large-format superconducting detector arrays intended for use in the next generation of balloon-borne and space-based sub-millimeter and far-infrared missions. We will demonstrate this technology on the upcoming NASA Next Generation Balloon-borne Large Aperture Sub-millimeter Telescope (BLAST-TNG) to measure the polarized emission of Galactic dust at wavelengths of 250, 350 and 500 microns. The BLAST-TNG receiver incorporates the first arrays of Lumped Element Kinetic Inductance Detectors (LeKID) along with the first microwave multiplexing readout electronics to fly in a space-like environment and will significantly advance the TRL for these technologies. After the flight of BLAST-TNG, we will continue to improve the performance of the detectors and readout electronics for the next generation of balloon-borne instruments and for use in a future FIR Surveyor.
△ Less
Submitted 16 November, 2016;
originally announced November 2016.
-
3D printed beam splitter for polar neutral molecules
Authors:
Sean D. S. Gordon,
Andreas Osterwalder
Abstract:
We describe a macroscopic beam splitter for polar neutral molecules. A complex electrode structure is required for the beam splitter which would be very difficult to produce with traditional manufacturing methods. Instead, we make use of a nascent manufacturing technique: 3D printing of a plastic piece, followed by electroplating. This fabrication method opens a plethora of avenues for research, s…
▽ More
We describe a macroscopic beam splitter for polar neutral molecules. A complex electrode structure is required for the beam splitter which would be very difficult to produce with traditional manufacturing methods. Instead, we make use of a nascent manufacturing technique: 3D printing of a plastic piece, followed by electroplating. This fabrication method opens a plethora of avenues for research, since 3D printing imposes practically no limitations on possible shapes, and the plating produces chemically robust, conductive construction elements with an almost free choice of surface material; it has the added advantage of dramatically reduced production cost and time. Our beam splitter is an electrostatic hexapole guide that smoothly transforms into two bent quadrupoles. We demonstrate the correct functioning of this device by separating a supersonic molecular beam of ND3 into two correlated fractions. It is shown that this device can be used to implement experiments with differential detection wherein one of the fractions serves as a probe and the other as a reference. Reverse operation would allow to merging of two beams of neutral polar molecules.
△ Less
Submitted 5 April, 2017; v1 submitted 6 November, 2016;
originally announced November 2016.
-
Nodal Variational Principle for Excited States
Authors:
Federico Zahariev,
Mark S. Gordon,
Mel Levy
Abstract:
It is proven that the exact excited-state wave function and energy may be obtained by minimizing the energy expectation value of trial wave functions that are constrained only to have the correct nodes of the state of interest. This excited-state nodal minimum principle has the advantage that it requires neither minimization with the constraint of wave-function orthogonality to all lower eigenstat…
▽ More
It is proven that the exact excited-state wave function and energy may be obtained by minimizing the energy expectation value of trial wave functions that are constrained only to have the correct nodes of the state of interest. This excited-state nodal minimum principle has the advantage that it requires neither minimization with the constraint of wave-function orthogonality to all lower eigenstates nor the antisymmetry of the trial wave functions. It is also found that the minimization over the entire space can be partitioned into several interconnected minimizations within the individual nodal regions, and the exact excited-state energy may be obtained by a minimization in just one or several of these nodal regions. For the proofs of the theorem, it is observed that the many-electron eigenfunction (excited state as well as ground state), restricted to a nodal region, is equivalent to a ground-state wave function of one electron in a higher-dimensional space; and, alternatively, an explicit excited-state energy variational expression is utilized by generalizing the Jacobi method of multiplicative variation. In corollaries, error functions are constructed for cases for which the nodes are not necessarily exact. The exact nodes minimize the energy error functions with respect to nodal variations. Simple numerical illustrations of the error functions are presented.
△ Less
Submitted 22 August, 2018; v1 submitted 7 September, 2016;
originally announced September 2016.
-
Sources of Variability in Alpha Emissivity Measurements at LA and ULA Levels, a Multicenter Study
Authors:
B. D. McNally,
S. Coleman,
W. K. Warburton,
J. Autran,
B. M. Clark,
J. Cooley,
M. S. Gordon,
Z. Zhu
Abstract:
Alpha emissivity measurements are important in the semiconductor industry for assessing the suitability of materials for use in production processes. A recently published round-robin study that circulated the same samples to several alpha counting centers showed wide center-to-center variations in measured alpha emissivity. A separate analysis of these results hypothesized that much of the variati…
▽ More
Alpha emissivity measurements are important in the semiconductor industry for assessing the suitability of materials for use in production processes. A recently published round-robin study that circulated the same samples to several alpha counting centers showed wide center-to-center variations in measured alpha emissivity. A separate analysis of these results hypothesized that much of the variation might arise from differences in sample-to-entrance window separations. XIA recently introduced an ultra low background counter, the UltraLo-1800 (UltraLo), that operates in a fundamentally different manner from the proportional counters used at most of the centers in the original study. In particular, by placing the sample within the counting volume, it eliminates the sample-to-entrance window separation issue noted above, and so offers an opportunity to test this hypothesis. In this work we briefly review how the UltraLo operates and describe a new round-robin study conducted entirely on UltraLo instruments using a set of standard samples that included two samples used in the original study. This study shows that, for LA (Low Alpha between 2 and 50 alpha/khr-cm$^2$) sample measurements, the only remaining site-to-site variations were due to counting statistics. Variations in ULA (Ultra-Low Alpha < 2 alpha/khr-cm$^2$) sample measurements were reduced three-fold, compared to the earlier study, with the measurements suggesting that residual activity variations now primarily arise from site-to-site differences in the cosmogenic background.
△ Less
Submitted 3 March, 2014; v1 submitted 8 January, 2014;
originally announced January 2014.