-
Design and implementation of a seismic Newtonian-noise cancellation system for the Virgo gravitational-wave detector
Authors:
Soumen Koley,
Jan Harms,
Annalisa Allocca,
Enrico Calloni,
Rosario De Rosa,
Luciano Errico,
Marina Esposito,
Francesca Badaracco,
Luca Rei,
Alessandro Bertolini,
Tomasz Bulik,
Marek Cieslar,
Mateusz Pietrzak,
Mariusz Suchenek,
Irene Fiori,
Andrea Paoli,
Maria Concetta Tringali,
Paolo Ruggi,
Stefan Hild,
Ayatri Singha,
Bartosz Idzkowski,
Maciej Suchinski,
Alain Masserot,
Loic Rolland,
Benoit Mours
, et al. (1 additional authors not shown)
Abstract:
Terrestrial gravity perturbations caused by seismic fields produce the so-called Newtonian noise in gravitational-wave detectors, which is predicted to limit their sensitivity in the upcoming observing runs. In the past, this noise was seen as an infrastructural limitation, i.e., something that cannot be overcome without major investments to improve a detector's infrastructure. However, it is poss…
▽ More
Terrestrial gravity perturbations caused by seismic fields produce the so-called Newtonian noise in gravitational-wave detectors, which is predicted to limit their sensitivity in the upcoming observing runs. In the past, this noise was seen as an infrastructural limitation, i.e., something that cannot be overcome without major investments to improve a detector's infrastructure. However, it is possible to have at least an indirect estimate of this noise by using the data from a large number of seismometers deployed around a detector's suspended test masses. The noise estimate can be subtracted from the gravitational-wave data; a process called Newtonian-noise cancellation (NNC). In this article, we present the design and implementation of the first NNC system at the Virgo detector as part of its AdV+ upgrade. It uses data from 110 vertical geophones deployed inside the Virgo buildings in optimized array configurations. We use a separate tiltmeter channel to test the pipeline in a proof-of-principle. The system has been running with good performance over months.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
-
External environmental noise influences on Virgo during O3
Authors:
Nicolas Arnaud,
Rosario De Rosa,
Francesco Di Renzo,
Irene Fiori,
Carlo Giunchi,
Kamiel Janssens,
Alessandro Longo,
Marco Olivieri,
Federico Paoletti,
Paolo Ruggi,
Maria Concetta Tringali
Abstract:
Sources of geophysical noise, such as wind, sea waves and earthquakes, can have an impact on gravitational wave interferometers causing sensitivity worsening and gaps in data taking. During the 1-year long O3 run (April 1st 2019 to March 27th 2020), the Virgo Collaboration collected a statistically significant dataset to study the response of the detector to a variety of environmental conditions.…
▽ More
Sources of geophysical noise, such as wind, sea waves and earthquakes, can have an impact on gravitational wave interferometers causing sensitivity worsening and gaps in data taking. During the 1-year long O3 run (April 1st 2019 to March 27th 2020), the Virgo Collaboration collected a statistically significant dataset to study the response of the detector to a variety of environmental conditions. We used these data to correlate environmental parameters to global detector performance, such as observation range, duty cycle and control losses. Where possible, we identified weaknesses in the detector and we elaborated strategies to improve Virgo robustness against external disturbances for the next run O4, planned to start in summer 2022. In this article we present preliminary results of this study.
△ Less
Submitted 8 April, 2022;
originally announced April 2022.
-
Site-selection criteria for the Einstein Telescope
Authors:
Florian Amann,
Fabio Bonsignorio,
Tomasz Bulik,
Henk Jan Bulten,
Stefano Cuccuru,
Alain Dassargues,
Riccardo DeSalvo,
Edit Fenyvesi,
Francesco Fidecaro,
Irene Fiori,
Carlo Giunchi,
Aniello Grado,
Jan Harms,
Soumen Koley,
Laszlo Kovacs,
Giovanni Losurdo,
Vuk Mandic,
Patrick Meyers,
Luca Naticchioni,
Frederic Nguyen,
Giacomo Oggiano,
Marco Olivieri,
Federico Paoletti,
Andrea Paoli,
Wolfango Plastino
, et al. (7 additional authors not shown)
Abstract:
The Einstein Telescope (ET) is a proposed next-generation, underground gravitational-wave (GW) detector to be based in Europe. It will provide about an order of magnitude sensitivity increase with respect to currently operating detectors, and furthermore, extend the observation band towards lower frequencies, i.e., down to about 3Hz. One of the first decisions that needs to be made is about the fu…
▽ More
The Einstein Telescope (ET) is a proposed next-generation, underground gravitational-wave (GW) detector to be based in Europe. It will provide about an order of magnitude sensitivity increase with respect to currently operating detectors, and furthermore, extend the observation band towards lower frequencies, i.e., down to about 3Hz. One of the first decisions that needs to be made is about the future ET site following an in-depth site characterization. Site evaluation and selection is a complicated process, which takes into account science, financial, political, and socio-economic criteria. In this paper, we provide an overview of the site-selection criteria for ET, provide a formalism to evaluate the direct impact of environmental noise on ET sensitivity, and outline the necessary elements of a site-characterization campaign.
△ Less
Submitted 14 June, 2020; v1 submitted 6 March, 2020;
originally announced March 2020.
-
Seismic array measurements at Virgo's West End Building for the configuration of a Newtonian-noise cancellation system
Authors:
M. C. Tringali,
T. Bulik,
J. Harms,
I. Fiori,
F. Paoletti,
N. Singh,
B. Idzkowski,
A. Kutynia,
K. Nikliborc,
M. Suchinski,
A. Bertolini,
S. Koley
Abstract:
Terrestrial gravity fluctuations produce so-called Newtonian noise (NN) which is expected to limit the low frequency sensitivity of existing gravitational-waves (GW) detectors LIGO and Virgo, when they will reach their full potential, and of next-generation detectors like the Einstein Telescope. In this paper, we present a detailed characterization of the seismic field at Virgo's West End Building…
▽ More
Terrestrial gravity fluctuations produce so-called Newtonian noise (NN) which is expected to limit the low frequency sensitivity of existing gravitational-waves (GW) detectors LIGO and Virgo, when they will reach their full potential, and of next-generation detectors like the Einstein Telescope. In this paper, we present a detailed characterization of the seismic field at Virgo's West End Building as part of the development of a Newtonian noise cancellation system. The cancellation system will use optimally filtered data from a seismometer array to produce an estimate of the Newtonian-noise generated by the seismic field, and to subtract this estimate from the gravitational-wave channel of the detector. By using an array of 38 seismic sensors, we show that, despite the influence of the complexity of Virgo's infrastructure on the correlation across the array, Wiener filtering can still be very efficient in reconstructing the seismic field around the test-mass location. Taking into account the division of the building's foundations into separate concrete slabs, and the different properties of the seismic field across them, we conclude that the arrays to be used for the Newtonian-noise cancellation at Virgo will require a relatively large number of seismometers per test mass, i.e. significantly more than 10. Moreover, observed variations of the absolute noise residuals over time, related to the daily evolution of anthropogenic noise, suggest that the Wiener filter will need to be updated regularly, probably more often than every hour, to achieve stationarity of the background level after subtraction.
△ Less
Submitted 18 December, 2019;
originally announced December 2019.
-
Investigation of magnetic noise in Advanced Virgo
Authors:
A. Cirone,
I. Fiori,
F. Paoletti,
M. M. Perez,
A. R. Rodríguez,
B. L. Swinkels,
A. M. Vazquez,
G. Gemme,
A. Chincarini
Abstract:
The Advanced Virgo (AdV) sensitivity might be influenced by the effects of environmental noise, in particular magnetic noise (MN). In order to show the impact on the gravitational-wave strain signal h(t) and on the AdV sensitivity, we must understand the coupling between the environmental magnetic activity and the strain. The relationship between the environmental noise - measured by a physical en…
▽ More
The Advanced Virgo (AdV) sensitivity might be influenced by the effects of environmental noise, in particular magnetic noise (MN). In order to show the impact on the gravitational-wave strain signal h(t) and on the AdV sensitivity, we must understand the coupling between the environmental magnetic activity and the strain. The relationship between the environmental noise - measured by a physical environment monitor (PEM) - and h(t) is investigated using injection studies, where an intentional stimulus is introduced and the responses of both PEM sensors and the instrument are analyzed. We also present the most outstanding measurements and results obtained from both the characterization and the mitigation studies of the environmental MN. Results show that MN does not affect AdV sensitivity up to $\approx 100$ Mpc in BNS range.
△ Less
Submitted 29 August, 2019;
originally announced August 2019.
-
Magnetic coupling to the Advanced Virgo payloads and its impact on the low frequency sensitivity
Authors:
A. Cirone,
A. Chincarini,
M. Neri,
S. Farinon,
G. Gemme,
I. Fiori,
F. Paoletti,
E. Majorana,
P. Puppo,
P. Rapagnani,
P. Ruggi,
B. L. Swinkels
Abstract:
We study the electromagnetic coupling of the Advanced Virgo (AdV) Input Mirror Payload (IMP) in response to a slowly time-varying magnetic field. As the problem is not amenable to analytical solution, we employ and validate a finite element (FE) analysis approach. The FE model is built to represent as faithfully as possible the real object and it has been validated by comparison with experimental…
▽ More
We study the electromagnetic coupling of the Advanced Virgo (AdV) Input Mirror Payload (IMP) in response to a slowly time-varying magnetic field. As the problem is not amenable to analytical solution, we employ and validate a finite element (FE) analysis approach. The FE model is built to represent as faithfully as possible the real object and it has been validated by comparison with experimental measurements. The intent is to estimate the induced currents and the magnetic field in the neighbourhood of the payload. The procedure found 21 equivalent electrical configurations that are compatible with the measurements. These have been used to compute the magnetic noise contribution to the total AdV strain noise. At the current stage of development AdV seems to be unaffected by magnetic noise, but we foresee a non-negligible coupling once AdV reaches the design sensitivity.
△ Less
Submitted 23 October, 2018; v1 submitted 17 July, 2018;
originally announced July 2018.
-
Subtraction of correlated noise in global networks of gravitational-wave interferometers
Authors:
Michael W. Coughlin,
Nelson L. Christensen,
Rosario De Rosa,
Irene Fiori,
Mark Gołkowski,
Melissa Guidry,
Jan Harms,
Jerzy Kubisz,
Andrzej Kulak,
Janusz Mlynarczyk,
Federico Paoletti,
Eric Thrane
Abstract:
The recent discovery of merging black holes suggests that a stochastic gravitational-wave background is within reach of the advanced detector network operating at design sensitivity. However, correlated magnetic noise from Schumann resonances threatens to contaminate observation of a stochastic background. In this paper, we report on the first effort to eliminate intercontinental correlated noise…
▽ More
The recent discovery of merging black holes suggests that a stochastic gravitational-wave background is within reach of the advanced detector network operating at design sensitivity. However, correlated magnetic noise from Schumann resonances threatens to contaminate observation of a stochastic background. In this paper, we report on the first effort to eliminate intercontinental correlated noise from Schumann resonances using Wiener filtering. Using magnetometers as proxies for gravitational-wave detectors, we demonstrate as much as a factor of two reduction in the coherence between magnetometers on different continents. While much work remains to be done, our results constitute a proof-of-principle and motivate follow-up studies with a dedicated array of magnetometers.
△ Less
Submitted 3 June, 2016;
originally announced June 2016.
-
Advanced Virgo: a 2nd generation interferometric gravitational wave detector
Authors:
F. Acernese,
M. Agathos,
K. Agatsuma,
D. Aisa,
N. Allemandou,
A. Allocca,
J. Amarni,
P. Astone,
G. Balestri,
G. Ballardin,
F. Barone,
J. -P. Baronick,
M. Barsuglia,
A. Basti,
F. Basti,
Th. S. Bauer,
V. Bavigadda,
M. Bejger,
M. G. Beker,
C. Belczynski,
D. Bersanetti,
A. Bertolini,
M. Bitossi,
M. A. Bizouard,
S. Bloemen
, et al. (209 additional authors not shown)
Abstract:
Advanced Virgo is the project to upgrade the Virgo interferometric detector of gravitational waves, with the aim of increasing the number of observable galaxies (and thus the detection rate) by three orders of magnitude. The project is now in an advanced construction phase and the assembly and integration will be completed by the end of 2015. Advanced Virgo will be part of a network with the two A…
▽ More
Advanced Virgo is the project to upgrade the Virgo interferometric detector of gravitational waves, with the aim of increasing the number of observable galaxies (and thus the detection rate) by three orders of magnitude. The project is now in an advanced construction phase and the assembly and integration will be completed by the end of 2015. Advanced Virgo will be part of a network with the two Advanced LIGO detectors in the US and GEO HF in Germany, with the goal of contributing to the early detections of gravitational waves and to opening a new observation window on the universe. In this paper we describe the main features of the Advanced Virgo detector and outline the status of the construction.
△ Less
Submitted 16 October, 2014; v1 submitted 18 August, 2014;
originally announced August 2014.
-
Reconstruction of the gravitational wave signal $h(t)$ during the Virgo science runs and independent validation with a photon calibrator
Authors:
Virgo collaboration,
T. Accadia,
F. Acernese,
M. Agathos,
A. Allocca,
P. Astone,
G. Ballardin,
F. Barone,
M. Barsuglia,
A. Basti,
Th. S. Bauer,
M. Bejger,
M . G. Beker,
C. Belczynski,
D. Bersanetti,
A. Bertolini,
M. Bitossi,
M. A. Bizouard,
M. Blom,
M. Boer,
F. Bondu,
L. Bonelli,
R. Bonnand,
V. Boschi,
L. Bosi
, et al. (171 additional authors not shown)
Abstract:
The Virgo detector is a kilometer-scale interferometer for gravitational wave detection located near Pisa (Italy). About 13 months of data were accumulated during four science runs (VSR1, VSR2, VSR3 and VSR4) between May 2007 and September 2011, with increasing sensitivity.
In this paper, the method used to reconstruct, in the range 10 Hz-10 kHz, the gravitational wave strain time series $h(t)$…
▽ More
The Virgo detector is a kilometer-scale interferometer for gravitational wave detection located near Pisa (Italy). About 13 months of data were accumulated during four science runs (VSR1, VSR2, VSR3 and VSR4) between May 2007 and September 2011, with increasing sensitivity.
In this paper, the method used to reconstruct, in the range 10 Hz-10 kHz, the gravitational wave strain time series $h(t)$ from the detector signals is described. The standard consistency checks of the reconstruction are discussed and used to estimate the systematic uncertainties of the $h(t)$ signal as a function of frequency. Finally, an independent setup, the photon calibrator, is described and used to validate the reconstructed $h(t)$ signal and the associated uncertainties.
The uncertainties of the $h(t)$ time series are estimated to be 8% in amplitude. The uncertainty of the phase of $h(t)$ is 50 mrad at 10 Hz with a frequency dependence following a delay of 8 $μ$s at high frequency. A bias lower than $4\,\mathrm{μs}$ and depending on the sky direction of the GW is also present.
△ Less
Submitted 3 July, 2014; v1 submitted 23 January, 2014;
originally announced January 2014.
-
Calibration and sensitivity of the Virgo detector during its second science run
Authors:
The Virgo Collaboration,
T. Accadia,
F. Acernese,
F. Antonucci,
P. Astone,
G. Ballardin,
F. Barone,
M. Barsuglia,
A. Basti,
Th. S. Bauer,
M. G. Beker,
A. Belletoile,
S. Birindelli,
M. Bitossi,
M. A. Bizouard,
M. Blom,
F. Bondu,
L. Bonelli,
R. Bonnand,
V. Boschi,
L. Bosi,
B. Bouhou,
S. Braccini,
C. Bradaschia,
A. Brillet
, et al. (153 additional authors not shown)
Abstract:
The Virgo detector is a kilometer-length interferometer for gravitational wave detection located near Pisa (Italy). During its second science run (VSR2) in 2009, six months of data were accumulated with a sensitivity close to its design. In this paper, the methods used to determine the parameters for sensitivity estimation and gravitational wave reconstruction are described. The main quantities to…
▽ More
The Virgo detector is a kilometer-length interferometer for gravitational wave detection located near Pisa (Italy). During its second science run (VSR2) in 2009, six months of data were accumulated with a sensitivity close to its design. In this paper, the methods used to determine the parameters for sensitivity estimation and gravitational wave reconstruction are described. The main quantities to be calibrated are the frequency response of the mirror actuation and the sensing of the output power. Focus is also put on their absolute timing. The monitoring of the calibration data as well as the parameter estimation with independent techniques are discussed to provide an estimation of the calibration uncertainties. Finally, the estimation of the Virgo sensitivity in the frequency-domain is described and typical sensitivities measured during VSR2 are shown.
△ Less
Submitted 18 January, 2011; v1 submitted 27 September, 2010;
originally announced September 2010.
