-
Pressure-Induced Separation of a Laminar Boundary Layer over a Partially-Slip Wall
Authors:
Benjamin Kellum Cooper,
Benjamin S. Savino,
John Marshall Cooper,
Taiho Yeom,
Wen Wu
Abstract:
The characteristics of pressure-induced laminar separation bubbles (LSBs) over a partially-slip wall, compared with that over a canonical no-slip wall, are studied using direct numerical simulation. Three cases, two utilizing linear Robin-type slip boundary conditions of differing slip length ($Λ$), and one non-slip are compared. For the partial-slip cases, a streamwise distribution of slip profil…
▽ More
The characteristics of pressure-induced laminar separation bubbles (LSBs) over a partially-slip wall, compared with that over a canonical no-slip wall, are studied using direct numerical simulation. Three cases, two utilizing linear Robin-type slip boundary conditions of differing slip length ($Λ$), and one non-slip are compared. For the partial-slip cases, a streamwise distribution of slip profile is employed ensuring smooth transition between no-slip and partial-slip (transition from no-slip to a constant slip length takes 5$δ$, where $δ$ is the inflow boundary layer thickness). The constant target slip length is maintained for $20δ$ upstream and during the onset of flow separation. The separation is induced by a wall-normal velocity profile applied at the top boundary. All cases are performed at $Re_δ= U_{\infty}δ/ν= 455$. Initial results indicate that as slip length increases, separation and reattachment are delayed. Most notably, the formation and shedding of roller vortices is mitigated as slip length increases, resulting in a less turbulent wake, despite that self-similarity of the plane shear layer is maintained.
△ Less
Submitted 13 August, 2024;
originally announced August 2024.
-
Separation of a Laminar Boundary Layer Subjected to Pressure Gradients with Spanwise Variations
Authors:
John Marshall Cooper,
Benjamin S. Savino,
Benjamin Kellum Cooper,
Wen Wu
Abstract:
The characteristics of three-dimensional laminar separation bubbles (LSBs), compared with their quasi-two-dimensional counterparts, are studied using direct numerical simulation. A three-dimensional suction-blowing distribution is applied on the top boundary to induce flow separation. Three levels of suction strength (i.e., adverse pressure gradient (APG) strength) are tested. For each suction lev…
▽ More
The characteristics of three-dimensional laminar separation bubbles (LSBs), compared with their quasi-two-dimensional counterparts, are studied using direct numerical simulation. A three-dimensional suction-blowing distribution is applied on the top boundary to induce flow separation. Three levels of suction strength (i.e., adverse pressure gradient (APG) strength) are tested. For each suction level, the spanwise extent of the suction is varied using a Gaussian distribution centered about the domain centerline. Two non-uniform suction distributions are compared with uniformly-applied suction across the full span (implying a two-dimensional LSB), totaling nine cases. All cases are performed at $Re_δ= U_{\infty}δ/ν= 1000$ based on the inflow boundary layer thickness ($δ$) and free-stream velocity ($U_{\infty}$). Initial results indicate stark contrast between three-dimensional and two-dimensional LSBs. Most notably, the role of suction width is determining the topology of the LSB and its reattachment mechanism. Meanwhile, APG is responsible for determining the size of the LSB and level of turbulence at reattachment. Streamwise-oriented vortices are identified along the crest of the three-dimensional LSBs.
△ Less
Submitted 12 August, 2024;
originally announced August 2024.
-
X-ray speed reading with the MCRC: prototype success and next generation upgrades
Authors:
Peter Orel,
Abigail Y. Pan,
Sven Herrmann,
Tanmoy Chattopadhyay,
Glenn Morris,
Haley Stueber,
Steven W. Allen,
Daniel Wilkins,
Gregory Prigozhin,
Beverly LaMarr,
Richard Foster,
Andrew Malonis,
Marshall W. Bautz,
Michael J. Cooper,
Kevan Donlon
Abstract:
The Advanced X-ray Imaging Satellite (AXIS) is a NASA probe class mission concept designed to deliver arcsecond resolution with an effective area ten times that of Chandra (at launch). The AXIS focal plane features an MIT Lincoln Laboratory (MIT-LL) X-ray charge-coupled device (CCD) detector working in conjunction with an application specific integrated circuit (ASIC), denoted the Multi-Channel Re…
▽ More
The Advanced X-ray Imaging Satellite (AXIS) is a NASA probe class mission concept designed to deliver arcsecond resolution with an effective area ten times that of Chandra (at launch). The AXIS focal plane features an MIT Lincoln Laboratory (MIT-LL) X-ray charge-coupled device (CCD) detector working in conjunction with an application specific integrated circuit (ASIC), denoted the Multi-Channel Readout Chip (MCRC). While this readout ASIC targets the AXIS mission, it is applicable to a range of potential X-ray missions with comparable readout requirements. Designed by the X-ray astronomy and Observational Cosmology (XOC) group at Stanford University, the MCRC ASIC prototype (MCRC-V1.0) uses a 350 nm technology node and provides 8 channels of high speed, low noise, low power consumption readout electronics. Each channel implements a current source to bias the detector output driver, a preamplifier to provide gain, and an output buffer to interface directly to an analog-to-digital (ADC) converter. The MCRC-V1 ASIC exhibits comparable performance to our best discrete electronics implementations, but with ten times less power consumption and a fraction of the footprint area. In a total ionizing dose (TID) test, the chip demonstrated a radiation hardness equal or greater to 25 krad, confirming the suitability of the process technology and layout techniques used in its design. The next iteration of the ASIC (MCRC-V2) will expand the channel count and extend the interfaces to external circuits, advancing its readiness as a readout-on-a-chip solution for next generation X-ray CCD-like detectors. This paper summarizes our most recent characterization efforts, including the TID radiation campaign and results from the first operation of the MCRC ASIC in combination with a representative MIT-LL CCD.
△ Less
Submitted 23 July, 2024;
originally announced July 2024.
-
Demonstrating sub-electron noise performance in Single electron Sensitive Readout (SiSeRO) devices
Authors:
Tanmoy Chattopadhyay,
Sven Herrmann,
Peter Orel,
Kevan Donlon,
Steven W. Allen,
Marshall W. Bautz,
Brianna Cantrall,
Michael Cooper,
Beverly LaMarr,
Chris Leitz,
Eric Miller,
R. Glenn Morris,
Abigail Y. Pan,
Gregory Prigozhin,
Ilya Prigozhin,
Haley R. Stueber,
Daniel R. Wilkins
Abstract:
Single electron Sensitive Read Out (SiSeRO) is a novel on-chip charge detection technology that can, in principle, provide significantly greater responsivity and improved noise performance than traditional charge coupled device (CCD) readout circuitry. The SiSeRO, developed by MIT Lincoln Laboratory, uses a p-MOSFET transistor with a depleted back-gate region under the transistor channel; as charg…
▽ More
Single electron Sensitive Read Out (SiSeRO) is a novel on-chip charge detection technology that can, in principle, provide significantly greater responsivity and improved noise performance than traditional charge coupled device (CCD) readout circuitry. The SiSeRO, developed by MIT Lincoln Laboratory, uses a p-MOSFET transistor with a depleted back-gate region under the transistor channel; as charge is transferred into the back gate region, the transistor current is modulated. With our first generation SiSeRO devices, we previously achieved a responsivity of around 800 pA per electron, an equivalent noise charge (ENC) of 4.5 electrons root mean square (RMS), and a full width at half maximum (FWHM) spectral resolution of 130 eV at 5.9 keV, at a readout speed of 625 Kpixel/s and for a detector temperature of 250 K. Importantly, since the charge signal remains unaffected by the SiSeRO readout process, we have also been able to implement Repetitive Non-Destructive Readout (RNDR), achieving an improved ENC performance. In this paper, we demonstrate sub-electron noise sensitivity with these devices, utilizing an enhanced test setup optimized for RNDR measurements, with excellent temperature control, improved readout circuitry, and advanced digital filtering techniques. We are currently fabricating new SiSeRO detectors with more sensitive and RNDR-optimized amplifier designs, which will help mature the SiSeRO technology in the future and eventually lead to the pathway to develop active pixel sensor (APS) arrays using sensitive SiSeRO amplifiers on each pixel. Active pixel devices with sub-electron sensitivity and fast readout present an exciting option for next generation, large area astronomical X-ray telescopes requiring fast, low-noise megapixel imagers.
△ Less
Submitted 23 July, 2024;
originally announced July 2024.
-
Real-time Manipulation of Liquid Droplets using Photo-responsive Surfactant
Authors:
Xichen Liang,
Kseniia M. Karnaukh,
Lei Zhao,
Serena Seshadri,
Austin J. DuBose,
Sophia J. Bailey,
Qixuan Cao,
Marielle Cooper,
Hao Xu,
Michael Haggmark,
Matthew E. Helgeson,
Michael Gordon,
Paolo Luzzatto-Fegiz,
Javier Read de Alaniz,
Yangying Zhu
Abstract:
Fast and programmable transport of liquid droplets on a solid substrate is desirable in microfluidic, thermal, biomedical, and energy devices. Past research has focused on designing substrates with asymmetric structures or gradient wettability where droplet behaviors are passively controlled, or by applying external electric, thermal, magnetic, or acoustic stimuli that either require the fabricati…
▽ More
Fast and programmable transport of liquid droplets on a solid substrate is desirable in microfluidic, thermal, biomedical, and energy devices. Past research has focused on designing substrates with asymmetric structures or gradient wettability where droplet behaviors are passively controlled, or by applying external electric, thermal, magnetic, or acoustic stimuli that either require the fabrication of electrodes or a strong applied field. In this work, we demonstrate tunable and programmable droplet motion on liquid-infused surfaces (LIS) and inside solid-surface capillary channels using low-intensity light and photo-responsive surfactants. When illuminated by the light of appropriate wavelengths, the surfactants can reversibly change their molecular conformation thereby tuning interfacial tensions in a multi-phase fluid system. This generates a Marangoni flow that drives droplet motions. With two novel surfactants that we synthesized, we demonstrate fast linear and complex 2D movements of droplets on liquid surfaces, on LIS, and inside microchannels. We also visualized the internal flow pattern using tracer particles and developed simple scaling arguments to explain droplet-size-dependent velocity. The method demonstrated in this study serves as a simple and exciting new approach for the dynamic manipulation of droplets for microfluidic, thermal, and water harvesting devices.
△ Less
Submitted 12 May, 2023; v1 submitted 11 May, 2023;
originally announced May 2023.
-
Using Dark Energy Explorers and Machine Learning to Enhance the Hobby-Eberly Telescope Dark Energy Experiment
Authors:
Lindsay R. House,
Karl Gebhardt,
Keely Finkelstein,
Erin Mentuch Cooper,
Dustin Davis,
Robin Ciardullo,
Daniel J Farrow,
Steven L. Finkelstein,
Caryl Gronwall,
Donghui Jeong,
L. Clifton Johnson,
Chenxu Liu,
Benjamin P. Thomas,
Gregory Zeimann
Abstract:
We present analysis using a citizen science campaign to improve the cosmological measures from the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX). The goal of HETDEX is to measure the Hubble expansion rate, $H(z)$, and angular diameter distance, $D_A(z)$, at $z =$ 2.4, each to percent-level accuracy. This accuracy is determined primarily from the total number of detected Lyman-$α$ emitters…
▽ More
We present analysis using a citizen science campaign to improve the cosmological measures from the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX). The goal of HETDEX is to measure the Hubble expansion rate, $H(z)$, and angular diameter distance, $D_A(z)$, at $z =$ 2.4, each to percent-level accuracy. This accuracy is determined primarily from the total number of detected Lyman-$α$ emitters (LAEs), the false positive rate due to noise, and the contamination due to [O II] emitting galaxies. This paper presents the citizen science project, Dark Energy Explorers, with the goal of increasing the number of LAEs, decreasing the number of false positives due to noise and the [O II] galaxies. Initial analysis shows that citizen science is an efficient and effective tool for classification most accurately done by the human eye, especially in combination with unsupervised machine learning. Three aspects from the citizen science campaign that have the most impact are 1) identifying individual problems with detections, 2) providing a clean sample with 100% visual identification above a signal-to-noise cut, and 3) providing labels for machine learning efforts. Since the end of 2022, Dark Energy Explorers has collected over three and a half million classifications by 11,000 volunteers in over 85 different countries around the world. By incorporating the results of the Dark Energy Explorers we expect to improve the accuracy on the $D_A(z)$ and $H(z)$ parameters at $z =$ 2.4 by 10 - 30%. While the primary goal is to improve on HETDEX, Dark Energy Explorers has already proven to be a uniquely powerful tool for science advancement and increasing accessibility to science worldwide.
△ Less
Submitted 14 April, 2023;
originally announced April 2023.
-
Improved noise performance from the next-generation buried-channel p-Mosfet SiSeROs
Authors:
Tanmoy Chattopadhyay,
Sven Herrmann,
Matthew Kaplan,
Peter Orel,
Kevan Donlon,
Gregory Prigozhin,
R. Glenn Morris,
Michael Cooper,
Andrew Malonis,
Steven W. Allen,
Marshall W. Bautz,
Chris Leitz
Abstract:
The Single electron Sensitive Read Out (SiSeRO) is a novel on-chip charge detector output stage for charge-coupled device (CCD) image sensors. Developed at MIT Lincoln Laboratory, this technology uses a p-MOSFET transistor with a depleted internal gate beneath the transistor channel. The transistor source-drain current is modulated by the transfer of charge into the internal gate. At Stanford, we…
▽ More
The Single electron Sensitive Read Out (SiSeRO) is a novel on-chip charge detector output stage for charge-coupled device (CCD) image sensors. Developed at MIT Lincoln Laboratory, this technology uses a p-MOSFET transistor with a depleted internal gate beneath the transistor channel. The transistor source-drain current is modulated by the transfer of charge into the internal gate. At Stanford, we have developed a readout module based on the drain current of the on-chip transistor to characterize the device. In our earlier work, we characterized a number of first prototype SiSeROs with the MOSFET transistor channels at the surface layer. An equivalent noise charge (ENC) of around 15 electrons root mean square (RMS) was obtained. In this work, we examine the first buried-channel SiSeRO. We have achieved substantially improved noise performance of around 4.5 electrons root mean square (RMS) and a full width half maximum (FWHM) energy resolution of 132 eV at 5.9 keV, for a readout speed of 625 kpixel/s. We also discuss how digital filtering techniques can be used to further improve the SiSeRO noise performance. Additional measurements and device simulations will be essential to further mature the SiSeRO technology. This new device class presents an exciting new technology for the next-generation astronomical X-ray telescopes requiring fast, low-noise, radiation-hard megapixel imagers with moderate spectroscopic resolution.
△ Less
Submitted 27 April, 2023; v1 submitted 11 February, 2023;
originally announced February 2023.
-
Single electron Sensitive Readout (SiSeRO) X-ray detectors: Technological progress and characterization
Authors:
Tanmoy Chattopadhyay,
Sven Herrmann,
Peter Orel,
R. G. Morris,
Daniel R. Wilkins,
Steven W. Allen,
Gregory Prigozhin,
Beverly LaMarr,
Andrew Malonis,
Richard Foster,
Marshall W. Bautz,
Kevan Donlon,
Michael Cooper,
Christopher Leitz
Abstract:
Single electron Sensitive Read Out (SiSeRO) is a novel on-chip charge detector output stage for charge-coupled device (CCD) image sensors. Developed at MIT Lincoln Laboratory, this technology uses a p-MOSFET transistor with a depleted internal gate beneath the transistor channel. The transistor source-drain current is modulated by the transfer of charge into the internal gate. At Stanford, we have…
▽ More
Single electron Sensitive Read Out (SiSeRO) is a novel on-chip charge detector output stage for charge-coupled device (CCD) image sensors. Developed at MIT Lincoln Laboratory, this technology uses a p-MOSFET transistor with a depleted internal gate beneath the transistor channel. The transistor source-drain current is modulated by the transfer of charge into the internal gate. At Stanford, we have developed a readout module based on the drain current of the on-chip transistor to characterize the device. Characterization was performed for a number of prototype sensors with different device architectures, e.g. location of the internal gate, MOSFET polysilicon gate structure, and location of the trough in the internal gate with respect to the source and drain of the MOSFET (the trough is introduced to confine the charge in the internal gate). Using a buried-channel SiSeRO, we have achieved a charge/current conversion gain of >700 pA per electron, an equivalent noise charge (ENC) of around 6 electrons root mean square (RMS), and a full width half maximum (FWHM) of approximately 140 eV at 5.9 keV at a readout speed of 625 Kpixel/s. In this paper, we discuss the SiSeRO working principle, the readout module developed at Stanford, and the characterization test results of the SiSeRO prototypes. We also discuss the potential to implement Repetitive Non-Destructive Readout (RNDR) with these devices and the preliminary results which can in principle yield sub-electron ENC performance. Additional measurements and detailed device simulations will be essential to mature the SiSeRO technology. However, this new device class presents an exciting technology for next generation astronomical X-ray telescopes requiring fast, low-noise, radiation hard megapixel imagers with moderate spectroscopic resolution.
△ Less
Submitted 1 August, 2022;
originally announced August 2022.
-
Thermal Energy Transport in Oxide Nuclear Fuel
Authors:
David H. Hurley,
Anter El-Azab,
Matthew S. Bryan,
Michael W. D. Cooper,
Cody A. Dennett,
Krzysztof Gofryk,
Lingfeng He,
Marat Khafizov,
Gerard H. Lander,
Michael E. Manley,
J. Matthew Mann,
Chris A. Marianetti,
Karl Rickert,
Farida A. Selim,
Michael R. Tonks,
Janelle P. Wharry
Abstract:
To efficiently capture the energy of the nuclear bond, advanced nuclear reactor concepts seek solid fuels that must withstand unprecedented temperature and radiation extremes. In these advanced fuels, thermal energy transport under irradiation is directly related to reactor performance as well as reactor safety. The science of thermal transport in nuclear fuel is a grand challenge due to both comp…
▽ More
To efficiently capture the energy of the nuclear bond, advanced nuclear reactor concepts seek solid fuels that must withstand unprecedented temperature and radiation extremes. In these advanced fuels, thermal energy transport under irradiation is directly related to reactor performance as well as reactor safety. The science of thermal transport in nuclear fuel is a grand challenge due to both computational and experimental complexities. Here, we provide a comprehensive review of thermal transport research on two actinide oxides: one currently in use in commercial nuclear reactors, uranium dioxide (UO2), and one advanced fuel candidate material, thorium dioxide (ThO2). In both materials, heat is carried by lattice waves or phonons. Crystalline defects caused by fission events effectively scatter phonons and lead to a degradation in fuel performance over time. Bolstered by new computational and experimental tools, researchers are now developing the foundational work necessary to accurately model and ultimately control thermal transport in advanced nuclear fuel. We begin by reviewing research aimed at understanding thermal transport in perfect single crystals. The absence of defects enables studies that focus on the fundamental aspects of phonon transport. Next, we review research that targets defect generation and evolution. Here, the focus is on ion irradiation studies used as surrogates for damage caused by fission products. We end this review with a discussion of modeling and experimental efforts directed at predicting and validating mesoscale thermal transport in the presence of irradiation defects. While efforts into these research areas have been robust, challenging work remains in developing holistic tools to capture and predict thermal energy transport across widely varying environmental conditions.
△ Less
Submitted 27 April, 2022;
originally announced April 2022.
-
Direct measurement of optical properties of glacier ice using a photon-counting diffuse LiDAR
Authors:
Markus Allgaier,
Matthew G. Cooper,
Anders E. Carlson,
Sarah W. Cooley,
Jonathan C. Ryan,
Brian J. Smith
Abstract:
The production of meltwater from glacier ice, which is exposed at the margins of land ice during the summer, is responsible for a large proportion of glacier mass loss. The rate of meltwater production from glacier ice is especially sensitive to its physical structure and chemical composition which combine to determine the albedo of glacier ice. However, the optical properties of near-surface glac…
▽ More
The production of meltwater from glacier ice, which is exposed at the margins of land ice during the summer, is responsible for a large proportion of glacier mass loss. The rate of meltwater production from glacier ice is especially sensitive to its physical structure and chemical composition which combine to determine the albedo of glacier ice. However, the optical properties of near-surface glacier ice are not well known since most prior work has focused on ice made in the laboratory or from deep cores. Here, we demonstrate a measurement technique based on diffuse propagation of nanosecond-duration laser pulses in near-surface glacier ice that enables the independent measurement of the scattering and absorption coefficients, allowing for a complete description of the processes governing radiative transfer. We employ a photon-counting detector to overcome the high losses associated with diffuse optics. The instrument is highly portable and rugged, making it optimally suited for deployment in remote regions. A set of measurements taken on Collier Glacier, Oregon, serves as a demonstration of the technique. These measurements provide insight into both physical structure and composition of near-surface glacier ice and open new avenues for the analysis of light-absorbing impurities and remote sensing of the cryosphere.
△ Less
Submitted 24 February, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
First results on SiSeRO (Single electron Sensitive Read Out) devices -- a new X-ray detector for scientific instrumentation
Authors:
Tanmoy Chattopadhyay,
Sven Herrmann,
Barry Burke,
Kevan Donlon,
Gregory Prigozhin,
R. Glenn Morris,
Peter Orel,
Michael Cooper,
Andrew Malonis,
Dan Wilkins,
Vyshnavi Suntharalingam,
Steven W. Allen,
Marshall Bautz,
Chris Leitz
Abstract:
We present an evaluation of a novel on-chip charge detector, called the Single electron Sensitive Read Out (SiSeRO), for charge-coupled device (CCD) image sensor applications. It uses a p-MOSFET transistor at the output stage with a depleted internal gate beneath the p-MOSFET. Charge transferred to the internal gate modulates the source-drain current of the transistor. We have developed a drain cu…
▽ More
We present an evaluation of a novel on-chip charge detector, called the Single electron Sensitive Read Out (SiSeRO), for charge-coupled device (CCD) image sensor applications. It uses a p-MOSFET transistor at the output stage with a depleted internal gate beneath the p-MOSFET. Charge transferred to the internal gate modulates the source-drain current of the transistor. We have developed a drain current readout module to characterize the detector. The prototype sensor achieves a charge/current conversion gain of 700 pA per electron, an equivalent noise charge (ENC) of 15 electrons (e-) root mean square (RMS), and a full width half maximum (FWHM) of 230 eV at 5.9 keV. In this paper, we discuss the SiSeRO working principle, the readout module developed at Stanford, and the first characterization test results of the SiSeRO prototypes. While at present only a proof-of-concept experiment, in the near future we plan to use next generation sensors with improved noise performance and an enhanced readout module. In particular, we are developing a readout module enabling Repetitive Non-Destructive Readout (RNDR) of the charge, which can in principle yield sub-electron ENC performance. With these developments, we eventually plan to build a matrix of SiSeRO amplifiers to develop an active pixel sensor with an on-chip ASIC-based readout system. Such a system, with fast readout speeds and sub-electron noise, could be effectively utilized in scientific applications requiring fast and low-noise spectro-imagers.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Nonequilibrium Thermodynamics in Measuring Carbon Footprints: Disentangling Structure and Artifact in Input-Output Accounting
Authors:
Samuel P. Loomis,
Mark Cooper,
James P. Crutchfield
Abstract:
Multiregional input-output (MRIO) tables, in conjunction with Leontief analysis, are widely-used to assess the geographical distribution of carbon emissions and the economic activities that cause them. Majorization, a tool originating in economics that has found utility in statistical mechanics, can provide insight into how Leontief analysis links disparities in emissions with global income inequa…
▽ More
Multiregional input-output (MRIO) tables, in conjunction with Leontief analysis, are widely-used to assess the geographical distribution of carbon emissions and the economic activities that cause them. Majorization, a tool originating in economics that has found utility in statistical mechanics, can provide insight into how Leontief analysis links disparities in emissions with global income inequality. We examine Leontief analysis as a model, drawing out similarities with modern nonequilibrium statistical mechanics. Paralleling the physical concept of thermo-majorization, we define the concept of eco-majorization and show it is a sufficient condition to determine the directionality of embodied emission flows. Surprisingly, relatively small trade deficits and a geographically heterogeneous emissions-per-dollar ratio greatly increases the appearance of eco-majorization, regardless of any further content in the MRIO tables used. Our results are bolstered by a statistical analysis of null models of MRIO tables, based on data provided by the Global Trade Aggregation Project9
△ Less
Submitted 12 November, 2021; v1 submitted 7 June, 2021;
originally announced June 2021.
-
Low-Temperature Kinetic Isotope Effects in CH3OH+H -> CH2OH+H2 Shed Light on the Deuteration of Methanol in Space
Authors:
April. M. Cooper,
Johannes Kästner
Abstract:
We calculated reaction rate constants including atom tunneling for the hydrogen abstraction reaction CH3OH+H -> CH2OH+H2 with the instanton method. The potential energy was fitted by a neural network, that was trained to UCCSD(T)-F12/VTZ-F12 data. Bimolecular gas-phase rate constants were calculated using microcanonic instanton theory. All H/D isotope patterns on the CH3 group and the incoming H a…
▽ More
We calculated reaction rate constants including atom tunneling for the hydrogen abstraction reaction CH3OH+H -> CH2OH+H2 with the instanton method. The potential energy was fitted by a neural network, that was trained to UCCSD(T)-F12/VTZ-F12 data. Bimolecular gas-phase rate constants were calculated using microcanonic instanton theory. All H/D isotope patterns on the CH3 group and the incoming H atom are studied. Unimolecular reaction rate constants, representing the reaction on a surface, down to 30 K, are presented for all isotope patterns. At 30 K they range from 4100 for the replacement of the abstracted H by D to ~ 8 for the replacement of the abstracting H to about 2--6 for secondary KIEs. The $^\text{12}$C/$^\text{13}$C kinetic isotope effect is 1.08 at 30 K, while the $^\text{16}$O/$^\text{18}$O kinetic isotope effect is vanishingly small. A simple kinetic surface model using these data predicts high abundances of the deuterated forms of methanol.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
Potential energy surface interpolation with neural networks for instanton rate calculations
Authors:
April M. Cooper,
Philipp P. Hallmen,
Johannes Kästner
Abstract:
Artificial neural networks are used to fit a potential energy surface. We demonstrate the benefits of using not only energies, but also their first and second derivatives as training data for the neural network. This ensures smooth and accurate Hessian surfaces, which are required for rate constant calculations using instanton theory. Our aim was a local, accurate fit rather than a global PES, bec…
▽ More
Artificial neural networks are used to fit a potential energy surface. We demonstrate the benefits of using not only energies, but also their first and second derivatives as training data for the neural network. This ensures smooth and accurate Hessian surfaces, which are required for rate constant calculations using instanton theory. Our aim was a local, accurate fit rather than a global PES, because instanton theory requires information on the potential only in the close vicinity of the main tunneling path. Elongations along vibrational normal modes at the transition state are used as coordinates for the neural network. The method is applied to the hydrogen abstraction reaction from methanol, calculated on a coupled-cluster level of theory. The reaction is essential in astrochemistry to explain the deuteration of methanol in the interstellar medium.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
Efficient Training of ANN Potentials by Including Atomic Forces via Taylor Expansion and Application to Water and a Transition-Metal Oxide
Authors:
April M. Cooper,
Johannes Kästner,
Alexander Urban,
Nongnuch Artrith
Abstract:
Artificial neural network (ANN) potentials enable the efficient large-scale atomistic modeling of complex materials with near first-principles accuracy. For molecular dynamics simulations, accurate energies and interatomic forces are a prerequisite, but training ANN potentials simultaneously on energies and forces from electronic structure calculations is computationally demanding. Here, we introd…
▽ More
Artificial neural network (ANN) potentials enable the efficient large-scale atomistic modeling of complex materials with near first-principles accuracy. For molecular dynamics simulations, accurate energies and interatomic forces are a prerequisite, but training ANN potentials simultaneously on energies and forces from electronic structure calculations is computationally demanding. Here, we introduce an efficient alternative method for the training of ANN potentials on energy and force information based on an extrapolation of the total energy via a Taylor expansion. By translating the force information to approximate energies, the quadratic scaling with the number of atoms exhibited by conventional force-training methods can be avoided, which enables the training on reference data sets containing complex atomic structures. We demonstrate for different materials systems, clusters of water molecules, bulk liquid water, and a lithium transition-metal oxide, that the proposed force-training approach provides substantial improvements over schemes that train on energies only. Including force information for training reduces the size of the reference data sets required for ANN potential construction, increases the transferability of the potential, and generally improves the force prediction accuracy. For a set of water clusters, the Taylor-expansion approach achieves around 50% of the force error improvement compared to the explicit training on all force components, at a much smaller computational cost. The alternative force training approach thus simplifies the construction of general ANN potentials for the prediction of accurate energies and interatomic forces for diverse types of materials, as demonstrated here for water and a transition-metal oxide.
△ Less
Submitted 1 May, 2020; v1 submitted 10 February, 2020;
originally announced February 2020.
-
A New Cryogenic Apparatus to Search for the Neutron Electric Dipole Moment
Authors:
M. W. Ahmed,
R. Alarcon,
A. Aleksandrova,
S. Baessler,
L. Barron-Palos,
L. M. Bartoszek,
D. H. Beck,
M. Behzadipour,
I. Berkutov,
J. Bessuille,
M. Blatnik,
M. Broering,
L. J. Broussard,
M. Busch,
R. Carr,
V. Cianciolo,
S. M. Clayton,
M. D. Cooper,
C. Crawford,
S. A. Currie,
C. Daurer,
R. Dipert,
K. Dow,
D. Dutta,
Y. Efremenko
, et al. (69 additional authors not shown)
Abstract:
A cryogenic apparatus is described that enables a new experiment, nEDM@SNS, with a major improvement in sensitivity compared to the existing limit in the search for a neutron Electric Dipole Moment (EDM). It uses superfluid $^4$He to produce a high density of Ultra-Cold Neutrons (UCN) which are contained in a suitably coated pair of measurement cells. The experiment, to be operated at the Spallati…
▽ More
A cryogenic apparatus is described that enables a new experiment, nEDM@SNS, with a major improvement in sensitivity compared to the existing limit in the search for a neutron Electric Dipole Moment (EDM). It uses superfluid $^4$He to produce a high density of Ultra-Cold Neutrons (UCN) which are contained in a suitably coated pair of measurement cells. The experiment, to be operated at the Spallation Neutron Source at Oak Ridge National Laboratory, uses polarized $^3$He from an Atomic Beam Source injected into the superfluid $^4$He and transported to the measurement cells as a co-magnetometer. The superfluid $^4$He is also used as an insulating medium allowing significantly higher electric fields, compared to previous experiments, to be maintained across the measurement cells. These features provide an ultimate statistical uncertainty for the EDM of $2-3\times 10^{-28}$ e-cm, with anticipated systematic uncertainties below this level.
△ Less
Submitted 20 November, 2019; v1 submitted 26 August, 2019;
originally announced August 2019.
-
The neutron electric dipole moment experiment at the Spallation Neutron Source
Authors:
K. K. H. Leung,
M. Ahmed,
R. Alarcon,
A. Aleksandrova,
S. Baeßler,
L. Barrón-Palos,
L. Bartoszek,
D. H. Beck,
M. Behzadipour,
J. Bessuille,
M. A. Blatnik,
M. Broering,
L. J. Broussard,
M. Busch,
R. Carr,
P. -H. Chu,
V. Cianciolo,
S. M. Clayton,
M. D. Cooper,
C. Crawford,
S. A. Currie,
C. Daurer,
R. Dipert,
K. Dow,
D. Dutta
, et al. (68 additional authors not shown)
Abstract:
Novel experimental techniques are required to make the next big leap in neutron electric dipole moment experimental sensitivity, both in terms of statistics and systematic error control. The nEDM experiment at the Spallation Neutron Source (nEDM@SNS) will implement the scheme of Golub & Lamoreaux [Phys. Rep., 237, 1 (1994)]. The unique properties of combining polarized ultracold neutrons, polarize…
▽ More
Novel experimental techniques are required to make the next big leap in neutron electric dipole moment experimental sensitivity, both in terms of statistics and systematic error control. The nEDM experiment at the Spallation Neutron Source (nEDM@SNS) will implement the scheme of Golub & Lamoreaux [Phys. Rep., 237, 1 (1994)]. The unique properties of combining polarized ultracold neutrons, polarized $^3$He, and superfluid $^4$He will be exploited to provide a sensitivity to $\sim 10^{-28}\,e{\rm \,\cdot\, cm}$. Our cryogenic apparatus will deploy two small ($3\,{\rm L}$) measurement cells with a high density of ultracold neutrons produced and spin analyzed in situ. The electric field strength, precession time, magnetic shielding, and detected UCN number will all be enhanced compared to previous room temperature Ramsey measurements. Our $^3$He co-magnetometer offers unique control of systematic effects, in particular the Bloch-Siegert induced false EDM. Furthermore, there will be two distinct measurement modes: free precession and dressed spin. This will provide an important self-check of our results. Following five years of "critical component demonstration," our collaboration transitioned to a "large scale integration" phase in 2018. An overview of our measurement techniques, experimental design, and brief updates are described in these proceedings.
△ Less
Submitted 4 October, 2019; v1 submitted 6 March, 2019;
originally announced March 2019.
-
Sustained neutron production from a sheared-flow stabilized Z-pinch
Authors:
Y. Zhang,
U. Shumlak,
B. A. Nelson,
R. P. Golingo,
T. R. Weber,
A. D. Stepanov,
E. L. Claveau,
E. G. Forbes,
Z. T. Draper,
J. M. Mitrani,
H. S. McLean,
K. K. Tummel,
D. P. Higginson,
C. M. Cooper
Abstract:
The sheared-flow stabilized $Z$-pinch has demonstrated long-lived plasmas with fusion-relevant parameters. This Letter presents the first experimental results demonstrating sustained, quasi-steady-state neutron production from the Fusion $Z$-pinch Experiment (FuZE), operated with a mixture of 20% deuterium/80% hydrogen by volume. Neutron emissions lasting approximately $5~μ$s are reproducibly obse…
▽ More
The sheared-flow stabilized $Z$-pinch has demonstrated long-lived plasmas with fusion-relevant parameters. This Letter presents the first experimental results demonstrating sustained, quasi-steady-state neutron production from the Fusion $Z$-pinch Experiment (FuZE), operated with a mixture of 20% deuterium/80% hydrogen by volume. Neutron emissions lasting approximately $5~μ$s are reproducibly observed with pinch currents of approximately $200$ kA during an approximately $16~μ$s period of plasma quiescence. The average neutron yield is estimated to be $\left ( 1.25\pm 0.45 \right )\times 10^{5}$ neutrons/pulse and scales with the square of the deuterium concentration. Coincident with the neutron signal, plasma temperatures of $1-2$ keV, and densities of approximately $10^{17}$ cm$^{-3}$ with $0.3$ cm pinch radii are measured with fully-integrated diagnostics.
△ Less
Submitted 24 February, 2019; v1 submitted 15 June, 2018;
originally announced June 2018.
-
Spectral Calibration of the Fluorescence Telescopes of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz
, et al. (381 additional authors not shown)
Abstract:
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator.…
▽ More
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator. Different sets of telescopes in the observatory have different optical components, and the eight telescopes measured represent two each of the four combinations of components represented in the observatory. We made an end-to-end measurement of the response from different combinations of optical components, and the monochromator setup allowed for more precise and complete measurements than our previous multi-wavelength calibrations. We find an overall uncertainty in the calibration of the spectral response of most of the telescopes of 1.5% for all wavelengths; the six oldest telescopes have larger overall uncertainties of about 2.2%. We also report changes in physics measureables due to the change in calibration, which are generally small.
△ Less
Submitted 2 October, 2017; v1 submitted 5 September, 2017;
originally announced September 2017.
-
Muon Counting using Silicon Photomultipliers in the AMIGA detector of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu
, et al. (400 additional authors not shown)
Abstract:
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is com…
▽ More
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is composed of three scintillation modules, with a 10 m$^2$ detection area per module. In this paper, a new generation of detectors, replacing the current multi-pixel photomultiplier tube (PMT) with silicon photo sensors (aka. SiPMs), is proposed. The selection of the new device and its front-end electronics is explained. A method to calibrate the counting system that ensures the performance of the detector is detailed. This method has the advantage of being able to be carried out in a remote place such as the one where the detectors are deployed. High efficiency results, i.e. 98 % efficiency for the highest tested overvoltage, combined with a low probability of accidental counting ($\sim$2 %), show a promising performance for this new system.
△ Less
Submitted 4 October, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Prototype muon detectors for the AMIGA component of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin
, et al. (429 additional authors not shown)
Abstract:
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary…
▽ More
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary Cell, are to identify and resolve all engineering issues as well as to understand the muon-number counting uncertainties related to the design of the detector. The mechanical design, fabrication and deployment processes of the muon counters of the Unitary Cell are described in this document. These muon counters modules comprise sealed PVC casings containing plastic scintillation bars, wavelength-shifter optical fibers, 64 pixel photomultiplier tubes, and acquisition electronics. The modules are buried approximately 2.25 m below ground level in order to minimize contamination from electromagnetic shower particles. The mechanical setup, which allows access to the electronics for maintenance, is also described in addition to tests of the modules' response and integrity. The completed Unitary Cell has measured a number of air showers of which a first analysis of a sample event is included here.
△ Less
Submitted 12 May, 2016; v1 submitted 5 May, 2016;
originally announced May 2016.
-
Characterizing College Science Assessments: The Three-Dimensional Learning Assessment Protocol
Authors:
James T. Laverty,
Sonia M. Underwood,
Rebecca L. Matz,
Lynmarie A. Posey,
Justin H. Carmel,
Marcos D. Caballero,
Cori L. Fata-Hartley,
Diane Ebert-May,
Sarah E. Jardeleza,
Melanie M. Cooper
Abstract:
Many calls to improve science education in college and university settings have focused on improving instructor pedagogy. Meanwhile, science education at the K-12 level is undergoing significant changes as a result of the emphasis on scientific and engineering practices, crosscutting concepts, and disciplinary core ideas. This framework of "three-dimensional learning" is based on the literature ab…
▽ More
Many calls to improve science education in college and university settings have focused on improving instructor pedagogy. Meanwhile, science education at the K-12 level is undergoing significant changes as a result of the emphasis on scientific and engineering practices, crosscutting concepts, and disciplinary core ideas. This framework of "three-dimensional learning" is based on the literature about how people learn science and how we can help students put their knowledge to use. Recently, similar changes are underway in higher education by incorporating three-dimensional learning into college science courses. As these transformations move forward, it will become important to assess three-dimensional learning both to align assessments with the learning environment, and to assess the extent of the transformations. In this paper we introduce the Three-Dimensional Learning Assessment Protocol (3D-LAP), which is designed to characterize and support the development of assessment tasks in biology, chemistry, and physics that align with transformation efforts. We describe the development process used by our interdisciplinary team, discuss the validity and reliability of the protocol, and provide evidence that the protocol can distinguish between assessments that have the potential to elicit evidence of three-dimensional learning and those that do not.
△ Less
Submitted 6 October, 2016; v1 submitted 26 April, 2016;
originally announced April 2016.
-
Nanosecond-level time synchronization of autonomous radio detector stations for extensive air showers
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila
, et al. (426 additional authors not shown)
Abstract:
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected…
▽ More
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected to have an accuracy no better than about 5 ns. In practice, in particular in AERA, the GPS clocks exhibit drifts on the order of tens of ns. We developed a technique to correct for the GPS drifts, and an independent method is used for cross-checks that indeed we reach nanosecond-scale timing accuracy by this correction. First, we operate a "beacon transmitter" which emits defined sine waves detected by AERA antennas recorded within the physics data. The relative phasing of these sine waves can be used to correct for GPS clock drifts. In addition to this, we observe radio pulses emitted by commercial airplanes, the position of which we determine in real time from Automatic Dependent Surveillance Broadcasts intercepted with a software-defined radio. From the known source location and the measured arrival times of the pulses we determine relative timing offsets between radio detector stations. We demonstrate with a combined analysis that the two methods give a consistent timing calibration with an accuracy of 2 ns or better. Consequently, the beacon method alone can be used in the future to continuously determine and correct for GPS clock drifts in each individual event measured by AERA.
△ Less
Submitted 15 February, 2016; v1 submitted 7 December, 2015;
originally announced December 2015.
-
Developing the Next Generation of Physics Assessments
Authors:
James T. Laverty,
Melanie M. Cooper,
Marcos D. Caballero
Abstract:
Science education at all levels is currently undergoing dramatic changes to its curricula and developing assessments for these new curricula is paramount. We have used the basis of many of these new changes (scientific practices, crosscutting concepts, and core ideas) to develop sets of criteria that can be used to guide assessment development for this new curriculum. We present a case study that…
▽ More
Science education at all levels is currently undergoing dramatic changes to its curricula and developing assessments for these new curricula is paramount. We have used the basis of many of these new changes (scientific practices, crosscutting concepts, and core ideas) to develop sets of criteria that can be used to guide assessment development for this new curriculum. We present a case study that uses the criteria we have developed to revise a traditional physics assessment item into an assessment item that is much more aligned with the goals of current transformation efforts. Assessment items developed using this criteria can be used to assess student learning of both the concepts and process of science.
△ Less
Submitted 23 October, 2015; v1 submitted 2 July, 2015;
originally announced July 2015.
-
The Wisconsin Plasma Astrophysics Laboratory
Authors:
C. B. Forest,
K. Flanagan,
M. Brookhart,
C. M. Cooper,
M. Clark,
V. Desangles,
J. Egedal,
D. Endrizzi,
M. Miesch,
I. V. Khalzov,
H. Li,
J. Milhone,
M. Nornberg,
J. Olson,
E. Peterson,
F. Roesler,
A. Schekochihin,
O. Schmitz,
R. Siller,
A. Spitkovsky,
A. Stemo,
J. Wallace,
D. Weisberg,
E. Zweibel
Abstract:
The Wisconsin Plasma Astrophysics Laboratory (WiPAL) is a flexible user facility designed to study a range of astrophysically relevant plasma processes as well as novel geometries that mimic astrophysical systems. A multi-cusp magnetic bucket constructed from strong samarium cobalt permanent magnets now confines a 10 m$^3$, fully ionized, magnetic-field free plasma in a spherical geometry. Plasma…
▽ More
The Wisconsin Plasma Astrophysics Laboratory (WiPAL) is a flexible user facility designed to study a range of astrophysically relevant plasma processes as well as novel geometries that mimic astrophysical systems. A multi-cusp magnetic bucket constructed from strong samarium cobalt permanent magnets now confines a 10 m$^3$, fully ionized, magnetic-field free plasma in a spherical geometry. Plasma parameters of $ T_{e}\approx5$ to $20$ eV and $n_{e}\approx10^{11}$ to $5\times10^{12}$ cm$^{-3}$ provide an ideal testbed for a range of astrophysical experiments including self-exciting dynamos, collisionless magnetic reconnection, jet stability, stellar winds, and more. This article describes the capabilities of WiPAL along with several experiments, in both operating and planning stages, that illustrate the range of possibilities for future users.
△ Less
Submitted 4 August, 2015; v1 submitted 23 June, 2015;
originally announced June 2015.
-
Electron elastic scattering and low-frequency bremsstrahlung on A@$C_{60}$: A model static approximation
Authors:
V. K. Dolmatov,
C. Bayens,
M. B. Cooper,
M. E. Hunter
Abstract:
Electron elastic-scattering phase shifts and cross sections along with the differential and total cross sections and polarization of low-frequency bremsstrahlung upon low-energy electron collision with endohedral fullerenes $A$@C$_{60}$ are theoretically scrutinized versus the nature, size and spin of the encapsulated atom $A$. The case-study-atoms $A$ are N, Ar, Cr, Mn, Mo, Tc, Xe, Ba, and Eu. Th…
▽ More
Electron elastic-scattering phase shifts and cross sections along with the differential and total cross sections and polarization of low-frequency bremsstrahlung upon low-energy electron collision with endohedral fullerenes $A$@C$_{60}$ are theoretically scrutinized versus the nature, size and spin of the encapsulated atom $A$. The case-study-atoms $A$ are N, Ar, Cr, Mn, Mo, Tc, Xe, Ba, and Eu. They are thoughtfully picked out of different rows of the periodic table. The study is performed in the framework of a model static approximation. There, both the encapsulated atom $A$ and C$_{60}$ cage are regarded as non-polarizable targets. The C$_{60}$ cage is modeled by an attractive spherical annular potential well. The study provides the most complete initial understanding of how the processes of interest might evolve upon electron collision with various $A$@C$_{60}$. Calculated results identify the most interesting and/or useful future measurements or more rigorous calculations to perform.
△ Less
Submitted 25 February, 2015; v1 submitted 18 February, 2015;
originally announced February 2015.
-
Prospects for observing the magnetorotational instability in the Plasma Couette Experiment
Authors:
K. Flanagan,
M. Clark,
C. Collins,
C. M. Cooper,
I. V. Khalzov,
J. Wallace,
C. B. Forest
Abstract:
Many astrophysical disks, such as protoplanetary disks, are in a regime where non-ideal, plasma-specific magnetohydrodynamic (MHD) effects can significantly influence the behavior of the magnetorotational instability (MRI). The possibility of studying these effects in the Plasma Couette Experiment (PCX) is discussed. An incompressible, dissipative global stability analysis is developed to include…
▽ More
Many astrophysical disks, such as protoplanetary disks, are in a regime where non-ideal, plasma-specific magnetohydrodynamic (MHD) effects can significantly influence the behavior of the magnetorotational instability (MRI). The possibility of studying these effects in the Plasma Couette Experiment (PCX) is discussed. An incompressible, dissipative global stability analysis is developed to include plasma-specific two-fluid effects and neutral collisions, which are inherently absent in analyses of Taylor-Couette flows (TCFs) in liquid metal experiments. It is shown that with boundary driven flows, a ion-neutral collision drag body force significantly affects the azimuthal velocity profile, thus limiting the flows to regime where the MRI is not present. Electrically driven flow (EDF) is proposed as an alternative body force flow drive in which the MRI can destabilize at more easily achievable plasma parameters. Scenarios for reaching MRI relevant parameter space and necessary hardware upgrades are described.
△ Less
Submitted 24 April, 2015; v1 submitted 29 September, 2014;
originally announced September 2014.
-
Engaging Physics Faculty in Course Transformation
Authors:
James T. Laverty,
Stuart H. Tessmer,
Melanie M. Cooper,
Marcos D. Caballero
Abstract:
Research has shown that it is challenging to change departmental culture to support the adoption of transformed teaching practices. Michigan State University is working to transform its introductory physics courses by engaging faculty in discussions about the scientific practices and core ideas of the discipline, and to use those discussions to drive change to both assessments and classroom instru…
▽ More
Research has shown that it is challenging to change departmental culture to support the adoption of transformed teaching practices. Michigan State University is working to transform its introductory physics courses by engaging faculty in discussions about the scientific practices and core ideas of the discipline, and to use those discussions to drive change to both assessments and classroom instruction. Here we discuss our model of change, its implementation in the Physics and Astronomy department, the challenges encountered along the way and how we've mitigated those challenges, and tools to measure the impact of this change.
△ Less
Submitted 30 September, 2014; v1 submitted 11 July, 2014;
originally announced July 2014.
-
Microrheology with Optical Tweezers: Measuring the solutions' relative viscosity at a glance
Authors:
Francesco Del Giudice,
Andrew Glidle,
Francesco Greco,
Paolo Antonio Netti,
Pier Luca Maffettone,
Jonathan M. Cooper,
Manlio Tassieri
Abstract:
We present a straightforward method for measuring the fluids' relative viscosity via a simple graphical analysis of the normalised position autocorrelation function of an optically trapped bead, without the need of embarking on laborious calculations. The advantages of the proposed microrheology method become evident, for instance, when it is adopted for measuring the molecular weight of rare or p…
▽ More
We present a straightforward method for measuring the fluids' relative viscosity via a simple graphical analysis of the normalised position autocorrelation function of an optically trapped bead, without the need of embarking on laborious calculations. The advantages of the proposed microrheology method become evident, for instance, when it is adopted for measuring the molecular weight of rare or precious materials by means of their intrinsic viscosity. The proposed method has been validated by direct comparison with conventional bulk rheology methods.
△ Less
Submitted 27 March, 2014; v1 submitted 26 March, 2014;
originally announced March 2014.
-
Taylor-Couette Flow of Unmagnetized Plasma
Authors:
C. Collins,
M. Clark,
C. M. Cooper,
K. Flanagan,
I. V. Khalzov,
M. D. Nornberg,
B. Seidlitz,
J. Wallace,
C. B. Forest
Abstract:
Differentially rotating flows of unmagnetized, highly conducting plasmas have been created in the Plasma Couette Experiment. Previously, hot-cathodes have been used to control plasma rotation by a stirring technique [C. Collins et al., Phys. Rev. Lett. 108, 115001(2012)] on the outer cylindrical boundary---these plasmas were nearly rigid rotors, modified only by the presence of a neutral particle…
▽ More
Differentially rotating flows of unmagnetized, highly conducting plasmas have been created in the Plasma Couette Experiment. Previously, hot-cathodes have been used to control plasma rotation by a stirring technique [C. Collins et al., Phys. Rev. Lett. 108, 115001(2012)] on the outer cylindrical boundary---these plasmas were nearly rigid rotors, modified only by the presence of a neutral particle drag. Experiments have now been extended to include stirring from an inner boundary, allowing for generalized circular Couette flow and opening a path for both hydrodynamic and magnetohydrodynamic experiments, as well as fundamental studies of plasma viscosity. Plasma is confined in a cylindrical, axisymmetric, multicusp magnetic field, with $T_e< 10$ eV, $T_i<1$ eV, and $n_e<10^{11}$ cm$^{-3}$. Azimuthal flows (up to 12 km/s, $M=V/c_s\sim 0.7$) are driven by edge ${\bf J \times B}$ torques in helium, neon, argon, and xenon plasmas, and the experiment has already achieved $Rm\sim 65$ and $Pm\sim 0.2 - 12$. We present measurements of a self-consistent, rotation-induced, species-dependent radial electric field, which acts together with pressure gradient to provide the centripetal acceleration for the ions. The maximum flow speeds scale with the Alfvén critical ionization velocity, which occurs in partially ionized plasma. A hydrodynamic stability analysis in the context of the experimental geometry and achievable parameters is also explored.
△ Less
Submitted 12 April, 2014; v1 submitted 9 March, 2014;
originally announced March 2014.
-
Electron elastic scattering off endohedral fullerenes A@C60: The initial insight
Authors:
V K Dolmatov,
M B Cooper,
M E Hunter
Abstract:
The initial insight into electron elastic scattering off endohedral fullerenes A@C60 is gained in the framework of a theoretical approach where the C60 cage is modelled by a rectangular (in the radial coordinate) potential well, as in many other A@C60 studies. The effect of a noticeably weaker electron elastic scattering off A@C60 compared to that off empty C60 or even the isolated atom A itself,…
▽ More
The initial insight into electron elastic scattering off endohedral fullerenes A@C60 is gained in the framework of a theoretical approach where the C60 cage is modelled by a rectangular (in the radial coordinate) potential well, as in many other A@C60 studies. The effect of a noticeably weaker electron elastic scattering off A@C60 compared to that off empty C60 or even the isolated atom A itself, as well as a strong sensitivity of e + A@C60 scattering to the spin of the captured atom A are unraveled, for certain kinds of atoms. Obtained results lay out the initial qualitative basis for identifying interesting measurements and/or more rigorous calculations of e + A@C60 elastic scattering to perform.
△ Less
Submitted 18 March, 2014; v1 submitted 12 January, 2014;
originally announced January 2014.
-
The Madison plasma dynamo experiment: a facility for studying laboratory plasma astrophysics
Authors:
C. M. Cooper,
J. Wallace,
M. Brookhart,
M. Clark,
C. Collins,
W. X. Ding,
K. Flanagan,
I. Khalzov,
Y. Li,
J. Milhone,
M. Nornberg,
P. Nonn,
D. Weisberg,
D. G. Whyte,
E. Zweibel,
C. B. Forest
Abstract:
The Madison plasma dynamo experiment (MPDX) is a novel, versatile, basic plasma research device designed to investigate flow driven magnetohydrodynamic (MHD) instabilities and other high-$β$ phenomena with astrophysically relevant parameters. A 3 m diameter vacuum vessel is lined with 36 rings of alternately oriented 4000 G samarium cobalt magnets which create an axisymmetric multicusp that contai…
▽ More
The Madison plasma dynamo experiment (MPDX) is a novel, versatile, basic plasma research device designed to investigate flow driven magnetohydrodynamic (MHD) instabilities and other high-$β$ phenomena with astrophysically relevant parameters. A 3 m diameter vacuum vessel is lined with 36 rings of alternately oriented 4000 G samarium cobalt magnets which create an axisymmetric multicusp that contains $\sim$14 m$^{3}$ of nearly magnetic field free plasma that is well confined and highly ionized $(>50\%)$. At present, 8 lanthanum hexaboride (LaB$_6$) cathodes and 10 molybdenum anodes are inserted into the vessel and biased up to 500 V, drawing 40 A each cathode, ionizing a low pressure Ar or He fill gas and heating it. Up to 100 kW of electron cyclotron heating (ECH) power is planned for additional electron heating. The LaB$_6$ cathodes are positioned in the magnetized edge to drive toroidal rotation through ${\bf J}\times{\bf B}$ torques that propagate into the unmagnetized core plasma. Dynamo studies on MPDX require a high magnetic Reynolds number $Rm > 1000$, and an adjustable fluid Reynolds number $10< Re <1000$, in the regime where the kinetic energy of the flow exceeds the magnetic energy ($M_A^2=($v$/$v$_A)^2 > 1$). Initial results from MPDX are presented along with a 0-dimensional power and particle balance model to predict the viscosity and resistivity to achieve dynamo action.
△ Less
Submitted 7 January, 2014; v1 submitted 31 October, 2013;
originally announced October 2013.
-
Fast dynamos in spherical boundary-driven flows
Authors:
I. V. Khalzov,
C. M. Cooper,
C. B. Forest
Abstract:
We numerically demonstrate the feasibility of kinematic fast dynamos for a class of time-periodic axisymmetric flows of conducting fluid confined inside a sphere. The novelty of our work is in considering the realistic flows, which are self-consistently determined from the Navier-Stokes equation with specified boundary driving. Such flows can be achieved in a new plasma experiment, whose spherical…
▽ More
We numerically demonstrate the feasibility of kinematic fast dynamos for a class of time-periodic axisymmetric flows of conducting fluid confined inside a sphere. The novelty of our work is in considering the realistic flows, which are self-consistently determined from the Navier-Stokes equation with specified boundary driving. Such flows can be achieved in a new plasma experiment, whose spherical boundary is capable of differential driving of plasma flows in the azimuthal direction. We show that magnetic fields are self-excited over a range of flow parameters such as amplitude and frequency of flow oscillations, fluid Reynolds (Re) and magnetic Reynolds (Rm) numbers. In the limit of large Rm, the growth rates of the excited magnetic fields are of the order of the advective time scales and practically independent of Rm, which is an indication of the fast dynamo.
△ Less
Submitted 28 August, 2013;
originally announced August 2013.
-
NEXUS/Physics: An interdisciplinary repurposing of physics for biologists
Authors:
E. F. Redish,
C. Bauer,
K. L. Carleton,
T. J. Cooke,
M. Cooper,
C. H. Crouch,
B. W. Dreyfus,
B. Geller,
J. Giannini,
J. Svoboda Gouvea,
M. W. Klymkowsky,
W. Losert,
K. Moore,
J. Presson,
V. Sawtelle,
K. V. Thompson,
C. Turpen,
R. K. P. Zia
Abstract:
In response to increasing calls for the reform of the undergraduate science curriculum for life science majors and pre-medical students (Bio2010, Scientific Foundations for Future Physicians, Vision & Change), an interdisciplinary team has created NEXUS/Physics: a repurposing of an introductory physics curriculum for the life sciences. The curriculum interacts strongly and supportively with introd…
▽ More
In response to increasing calls for the reform of the undergraduate science curriculum for life science majors and pre-medical students (Bio2010, Scientific Foundations for Future Physicians, Vision & Change), an interdisciplinary team has created NEXUS/Physics: a repurposing of an introductory physics curriculum for the life sciences. The curriculum interacts strongly and supportively with introductory biology and chemistry courses taken by life sciences students, with the goal of helping students build general, multi-discipline scientific competencies. In order to do this, our two-semester NEXUS/Physics course sequence is positioned as a second year course so students will have had some exposure to basic concepts in biology and chemistry. NEXUS/Physics stresses interdisciplinary examples and the content differs markedly from traditional introductory physics to facilitate this. It extends the discussion of energy to include interatomic potentials and chemical reactions, the discussion of thermodynamics to include enthalpy and Gibbs free energy, and includes a serious discussion of random vs. coherent motion including diffusion. The development of instructional materials is coordinated with careful education research. Both the new content and the results of the research are described in a series of papers for which this paper serves as an overview and context.
△ Less
Submitted 7 January, 2014; v1 submitted 22 August, 2013;
originally announced August 2013.
-
Mu2e Conceptual Design Report
Authors:
The Mu2e Project,
Collaboration,
:,
R. J. Abrams,
D. Alezander,
G. Ambrosio,
N. Andreev,
C. M. Ankenbrandt,
D. M. Asner,
D. Arnold,
A. Artikov,
E. Barnes,
L. Bartoszek,
R. H. Bernstein,
K. Biery,
V. Biliyar,
R. Bonicalzi,
R. Bossert,
M. Bowden,
J. Brandt,
D. N. Brown,
J. Budagov,
M. Buehler,
A. Burov,
R. Carcagno
, et al. (203 additional authors not shown)
Abstract:
Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe…
▽ More
Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the conceptual design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-1 approval, which was granted July 11, 2012.
△ Less
Submitted 29 November, 2012;
originally announced November 2012.
-
Optimized boundary driven flows for dynamos in a sphere
Authors:
I. V. Khalzov,
B. P. Brown,
C. M. Cooper,
D. B. Weisberg,
C. B. Forest
Abstract:
We perform numerical optimization of the axisymmetric flows in a sphere to minimize the critical magnetic Reynolds number Rm_cr required for dynamo onset. The optimization is done for the class of laminar incompressible flows of von Karman type satisfying the steady-state Navier-Stokes equation. Such flows are determined by equatorially antisymmetric profiles of driving azimuthal (toroidal) veloci…
▽ More
We perform numerical optimization of the axisymmetric flows in a sphere to minimize the critical magnetic Reynolds number Rm_cr required for dynamo onset. The optimization is done for the class of laminar incompressible flows of von Karman type satisfying the steady-state Navier-Stokes equation. Such flows are determined by equatorially antisymmetric profiles of driving azimuthal (toroidal) velocity specified at the spherical boundary. The model is relevant to the Madison plasma dynamo experiment (MPDX), whose spherical boundary is capable of differential driving of plasma in the azimuthal direction. We show that the dynamo onset in this system depends strongly on details of the driving velocity profile and the fluid Reynolds number Re. It is found that the overall lowest Rm_cr~200 is achieved at Re~240 for the flow, which is hydrodynamically marginally stable. We also show that the optimized flows can sustain dynamos only in the range Rm_cr<Rm<Rm_cr2, where Rm_cr2 is the second critical magnetic Reynolds number, above which the dynamo is quenched. Samples of the optimized flows and the corresponding dynamo fields are presented.
△ Less
Submitted 8 November, 2012;
originally announced November 2012.
-
Partial synchronisation of stochastic oscillators through hydrodynamic coupling
Authors:
Arran Curran,
Michael P. Lee,
Roberto Di Leonardo,
Jonathan M. Cooper,
Miles J. Padgett
Abstract:
Holographic optical tweezers are used to construct a static bistable optical potential energy landscape where a Brownian particle experiences restoring forces from two nearby optical traps and undergoes thermally activated transitions between the two energy minima. Hydrodynamic coupling between two such systems results in their partial synchronisation. This is interpreted as an emergence of higher…
▽ More
Holographic optical tweezers are used to construct a static bistable optical potential energy landscape where a Brownian particle experiences restoring forces from two nearby optical traps and undergoes thermally activated transitions between the two energy minima. Hydrodynamic coupling between two such systems results in their partial synchronisation. This is interpreted as an emergence of higher mobility pathways, along which it is easier to overcome barriers to structural rearrangement.
△ Less
Submitted 11 April, 2012; v1 submitted 9 December, 2011;
originally announced December 2011.
-
Measuring the viscous and elastic properties of single cells using video particle tracking microrheology
Authors:
Rebecca Louisa Warren,
Manlio Tassieri,
Xiang Li,
Andrew Glidle,
Allan Carlsson,
Jonathan M. Cooper
Abstract:
We present a simple and \emph{non-invasive} experimental procedure to measure the linear viscoelastic properties of cells by passive video particle tracking microrheology. In order to do this, a generalised Langevin equation is adopted to relate the time-dependent thermal fluctuations of a bead, chemically bound to the cell's \emph{exterior}, to the frequency-dependent viscoelastic moduli of the c…
▽ More
We present a simple and \emph{non-invasive} experimental procedure to measure the linear viscoelastic properties of cells by passive video particle tracking microrheology. In order to do this, a generalised Langevin equation is adopted to relate the time-dependent thermal fluctuations of a bead, chemically bound to the cell's \emph{exterior}, to the frequency-dependent viscoelastic moduli of the cell. It is shown that these moduli are related to the cell's cytoskeletal structure, which in this work is changed by varying the solution osmolarity from iso- to hypo-osmotic conditions. At high frequencies, the viscoelastic moduli frequency dependence changes from $\propto ω^{3/4}$ found in iso-osmotic solutions to $\propto ω^{1/2}$ in hypo--osmotic solutions; the first situation is typical of bending modes in isotropic \textit{in vitro} reconstituted F--actin networks, and the second could indicate that the restructured cytoskeleton behaves as a gel with "\textit{dangling branches}". The insights gained from this form of rheological analysis could prove to be a valuable addition to studies that address cellular physiology and pathology.
△ Less
Submitted 11 November, 2011;
originally announced November 2011.
-
The Pierre Auger Observatory V: Enhancements
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Ongoing and planned enhancements of the Pierre Auger Observatory
Ongoing and planned enhancements of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
-
The Pierre Auger Observatory IV: Operation and Monitoring
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Technical reports on operations and monitoring of the Pierre Auger Observatory
Technical reports on operations and monitoring of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
-
Optical tweezers: wideband microrheology
Authors:
Daryl Preece,
Rebecca Warren,
Manlio Tassieri,
R. M. L. Evans,
Graham M. Gibson,
Miles J. Padgett,
Jonathan M. Cooper
Abstract:
Microrheology is a branch of rheology having the same principles as conventional bulk rheology, but working on micron length scales and micro-litre volumes.
Optical tweezers have been successfully used with Newtonian fluids for rheological purposes such as determining fluid viscosity. Conversely, when optical tweezers are used to measure the viscoelastic properties of complex fluids the results a…
▽ More
Microrheology is a branch of rheology having the same principles as conventional bulk rheology, but working on micron length scales and micro-litre volumes.
Optical tweezers have been successfully used with Newtonian fluids for rheological purposes such as determining fluid viscosity. Conversely, when optical tweezers are used to measure the viscoelastic properties of complex fluids the results are either limited to the material's high-frequency response, discarding important information related to the low-frequency behavior, or they are supplemented by low-frequency measurements performed with different techniques, often without presenting an overlapping region of clear agreement between the sets of results. We present a simple experimental procedure to perform microrheological measurements over the widest frequency range possible with optical tweezers. A generalised Langevin equation is used to relate the frequency-dependent moduli of the complex fluid to the time-dependent trajectory of a probe particle as it flips between two optical traps that alternately switch on and off.
△ Less
Submitted 9 May, 2010;
originally announced May 2010.
-
Nanomechanical detection of antibiotic-mucopeptide binding in a model for superbug drug resistance
Authors:
J. W. Ndieyira,
M. Watari,
A. Donoso Barrera,
D. Zhou,
M. Vögtli,
M. Batchelor,
M. A. Cooper,
T. Strunz,
M. A. Horton,
C. Abell,
T. Rayment,
G. Aeppli,
R. A. Mckendry
Abstract:
The alarming growth of the antibiotic-resistant superbugs methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus (VRE) is driving the development of new technologies to investigate antibiotics and their modes of action. We report the label-free detection of vancomycin binding to bacterial cell wall precursor analogues (mucopeptides) on cantilever arrays, with 10…
▽ More
The alarming growth of the antibiotic-resistant superbugs methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus (VRE) is driving the development of new technologies to investigate antibiotics and their modes of action. We report the label-free detection of vancomycin binding to bacterial cell wall precursor analogues (mucopeptides) on cantilever arrays, with 10 nM sensitivity and at clinically relevant concentrations in blood serum. Differential measurements quantified binding constants for vancomycin-sensitive and vancomycin-resistant mucopeptide analogues. Moreover, by systematically modifying the mucopeptide density we gain new insights into the origin of surface stress. We propose that stress is a product of a local chemical binding factor and a geometrical factor describing the mechanical connectivity of regions affected by local binding in terms of a percolation process. Our findings place BioMEMS devices in a new class of percolative systems. The percolation concept will underpin the design of devices and coatings to significantly lower the drug detection limit and may also impact on our understanding of antibiotic drug action in bacteria.
△ Less
Submitted 15 December, 2008;
originally announced December 2008.
-
High Voltage Test Apparatus for a Neutron EDM Experiment and Lower Limit on the Dielectric Strength of Liquid Helium at Large Volumes
Authors:
J. C. Long,
P. D. Barnes,
J. G. Boissevain,
D. J. Clark,
M. D. Cooper,
J. J. Gomez,
S. K. Lamoreaux,
R. E. Mischke,
S. I. Penttila
Abstract:
A new search for a permanent electric dipole moment (EDM) of the neutron is underway using ultracold neutrons produced and held in a bath of superfluid helium. Attaining the target sensitivity requires maintaining an electric field of several tens of kilovolts per centimeter across the experimental cell, which is nominally 7.5 cm wide and will contain about 4 liters of superfluid. The electrical…
▽ More
A new search for a permanent electric dipole moment (EDM) of the neutron is underway using ultracold neutrons produced and held in a bath of superfluid helium. Attaining the target sensitivity requires maintaining an electric field of several tens of kilovolts per centimeter across the experimental cell, which is nominally 7.5 cm wide and will contain about 4 liters of superfluid. The electrical properties of liquid helium are expected to be sufficient to meet the design goals, but little is known about these properties for volumes and electrode spacings appropriate to the EDM experiment. Furthermore, direct application of the necessary voltages from an external source to the experimental test cell is impractical. An apparatus to amplify voltages in the liquid helium environment and to test the electrical properties of the liquid for large volumes and electrode spacings has been constructed. The device consists of a large-area parallel plate capacitor immersed in a 200 liter liquid helium dewar. Preliminary results show the breakdown strength of normal state liquid helium is at least 90 kV/cm at these volumes, at the helium vapor pressure corresponding to 4.38 K. These fields hold for more than 11 hours with leakage currents less than 170 pA (about 20% of the maximum tolerable in the EDM experiment). The system is also found to be robust against anticipated radiation backgrounds. Preliminary results for superfluid show that fields of at least 30 kV/cm can be sustained at the volumes required for the EDM experiment, about 60% of the design goal. These results are likely limited by the low pressure that must be maintained above the superfluid bath.
△ Less
Submitted 27 March, 2006;
originally announced March 2006.
-
Construction of a PZT Sensor Network for Low and Hypervelocity Impact Detection
Authors:
J. A. Carmona,
M. Cook,
M. Cooper,
J. Schmoke,
J. Reay,
L. Matthews,
T. Hyde
Abstract:
Orbital debris is a constraint on the long-term health of any spacecraft and must be considered during mission planning. Varying mechanisms have been proposed to quantify the problem. Assessment of orbital debris employing ground-based methods such as radar can help determine where debris clouds are located as well as their density or orbital trajectory. Such data is invaluable to computer simul…
▽ More
Orbital debris is a constraint on the long-term health of any spacecraft and must be considered during mission planning. Varying mechanisms have been proposed to quantify the problem. Assessment of orbital debris employing ground-based methods such as radar can help determine where debris clouds are located as well as their density or orbital trajectory. Such data is invaluable to computer simulations and can allow predictions of the debris environment over specific time periods [1]. Accurate in-situ data is essential as well with various types of sensors designed to detect orbital debris impacts employed on space missions since the 1950's [2]. One of the most common of these is the PZT (piezoelectric lead zirconate titanate) which is often used in-situ to measure the momentum of a particle at the time of impact. This paper will discuss a multiple PZT sensor system capable of determining both impactor momentum and location currently in development within CASPER.
△ Less
Submitted 10 January, 2005;
originally announced January 2005.