-
Phase-Imaging Ion-Cyclotron-Resonance Mass Spectrometry with the Canadian Penning Trap at CARIBU
Authors:
D. Ray,
A. A. Valverde,
M. Brodeur,
F. Buchinger,
J. A. Clark,
B. Liu,
G. E. Morgan,
R. Orford,
W. S. Porter,
G. Savard,
K. S. Sharma,
X. L. Yan
Abstract:
The Canadian Penning Trap mass spectrometer (CPT) has conducted precision mass measurements of neutron-rich nuclides from the CAlifornia Rare Isotope Breeder Upgrade (CARIBU) of the Argonne Tandem Linac Accelerator System (ATLAS) facility at Argonne National Laboratory for over a decade, first using Time-Of-Flight Ion-Cyclotron-Resonance (TOF-ICR) and later using Phase-Imaging Ion-Cyclotron-Resona…
▽ More
The Canadian Penning Trap mass spectrometer (CPT) has conducted precision mass measurements of neutron-rich nuclides from the CAlifornia Rare Isotope Breeder Upgrade (CARIBU) of the Argonne Tandem Linac Accelerator System (ATLAS) facility at Argonne National Laboratory for over a decade, first using Time-Of-Flight Ion-Cyclotron-Resonance (TOF-ICR) and later using Phase-Imaging Ion-Cyclotron-Resonance (PI-ICR) techniques. Here we give an overview of the CPT system as it was operated for PI-ICR measurements at CARIBU for over half a decade, along with some recently studied systematic effects.
△ Less
Submitted 22 July, 2024; v1 submitted 17 July, 2024;
originally announced July 2024.
-
The Beta-decay Paul Trap Mk IV: Design and commissioning
Authors:
L. Varriano,
G. Savard,
J. A. Clark,
D. P. Burdette,
M. T. Burkey,
A. T. Gallant,
T. Y. Hirsh,
B. Longfellow,
N. D. Scielzo,
R. Segel,
E. J. Boron III,
M. Brodeur,
N. Callahan,
A. Cannon,
K. Kolos,
B. Liu,
S. Lopez-Caceres,
M. Gott,
B. Maaß,
S. T. Marley,
C. Mohs,
G. E. Morgan,
P. Mueller,
M. Oberling,
P. D. O'Malley
, et al. (7 additional authors not shown)
Abstract:
The Beta-decay Paul Trap is an open-geometry, linear trap used to measure the decays of $^8$Li and $^8$B to search for a tensor contribution to the weak interaction. In the latest $^8$Li measurement of Burkey et al. (2022), $β$ scattering was the dominant experimental systematic uncertainty. The Beta-decay Paul Trap Mk IV reduces the prevalence of $β$ scattering by a factor of 4 through a redesign…
▽ More
The Beta-decay Paul Trap is an open-geometry, linear trap used to measure the decays of $^8$Li and $^8$B to search for a tensor contribution to the weak interaction. In the latest $^8$Li measurement of Burkey et al. (2022), $β$ scattering was the dominant experimental systematic uncertainty. The Beta-decay Paul Trap Mk IV reduces the prevalence of $β$ scattering by a factor of 4 through a redesigned electrode geometry and the use of glassy carbon and graphite as electrode materials. The trap has been constructed and successfully commissioned with $^8$Li in a new data campaign that collected 2.6 million triple coincidence events, an increase in statistics by 30% with 4 times less $β$ scattering compared to the previous $^8$Li data set.
△ Less
Submitted 30 October, 2023;
originally announced November 2023.
-
Expanding RIB Capabilities at the Cyclotron Institute: \textsuperscript{3}He-LIG production with an Isobar Separator LSTAR
Authors:
D. Melconian,
G. P. A. Berg,
P. D. Shidling,
M. Couder,
M. Brodeur,
G. Chubarian,
V. E. Iacob,
J. Klimo,
G. Tabacaru
Abstract:
A new \textsuperscript{3}He-driven IGISOL production station and mass separator have been designed to produce neutron-deficient low-mass isotopes at the Cyclotron Institute for the TAMUTRAP facility. The LSTAR design has a mass resolution $M/ΔM\geq 3, 000$ to reject contaminants with $\gt95\%$ efficiency.
A new \textsuperscript{3}He-driven IGISOL production station and mass separator have been designed to produce neutron-deficient low-mass isotopes at the Cyclotron Institute for the TAMUTRAP facility. The LSTAR design has a mass resolution $M/ΔM\geq 3, 000$ to reject contaminants with $\gt95\%$ efficiency.
△ Less
Submitted 17 March, 2023;
originally announced March 2023.
-
Advanced Radio Frequency Timing AppaRATus (ARARAT) Technique and Applications
Authors:
Ani Aprahamian,
Amur Margaryan,
Vanik Kakoyan,
Simon Zhamkochyan,
Sergey Abrahamyan,
Hayk Elbakyan,
Samvel Mayilyan,
Arpine Piloyan,
Henrik Vardanyan,
Hamlet Zohrabyan,
Lekdar Gevorgian,
Robert Ayvazyan,
Artashes Papyan,
Garnik Ayvazyan,
Arsen Ghalumyan,
Narek Margaryan,
Hasmik Rostomyan,
Anna Safaryan,
Bagrat Grigoryan,
Ashot Vardanyan,
Arsham Yeremyan,
John Annand,
Kenneth Livingston,
Rachel Montgomery,
Patrick Achenbach
, et al. (6 additional authors not shown)
Abstract:
The development of the advanced Radio Frequency Timer of electrons is described. It is based on a helical deflector, which performs circular or elliptical sweeps of keV electrons, by means of 500 MHz radio frequency field. By converting a time distribution of incident electrons to a hit position distribution on a circle or ellipse, this device achieves extremely precise timing. Streak Cameras, bas…
▽ More
The development of the advanced Radio Frequency Timer of electrons is described. It is based on a helical deflector, which performs circular or elliptical sweeps of keV electrons, by means of 500 MHz radio frequency field. By converting a time distribution of incident electrons to a hit position distribution on a circle or ellipse, this device achieves extremely precise timing. Streak Cameras, based on similar principles, routinely operate in the ps and sub-ps time domain, but have substantial slow readout system. Here, we report a device, where the position sensor, consisting of microchannel plates and a delay-line anode, produces ~ns duration pulses which can be processed by using regular fast electronics. A photon sensor based on this technique, the Radio Frequency Photo-Multiplier Tube (RFPMT), has demonstrated a timing resolution of ~10 ps and a time stability of ~0.5 ps, FWHM. This makes the apparatus highly suited for Time Correlated Single Photon Counting which is widely used in optical microscopy and tomography of biological samples. The first application in lifetime measurements of quantum states of graphene, under construction at the A. I. Alikhanyan National Science Laboratory (AANL), is outlined. This is followed by a description of potential RFPMT applications in time-correlated Diffuse Optical Tomography, time-correlated Stimulated Emission Depletion microscopy, hybrid FRET/STED nanoscopy and Time-of-Flight Positron Emission Tomography.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
TriSol: a major upgrade of the TwinSol RNB facility
Authors:
P. D. O'Malley,
T. Ahn,
D. W. Bardayan,
M. Brodeur,
S. Coil,
J. J. Kolata
Abstract:
We report here on the recent upgrade of the TwinSol radioactive nuclear beam (RNB) facility at the University of Notre Dame. The new TriSol system includes a magnetic dipole to provide a second beamline and a third solenoid which acts to reduce the size of the radioactive beam on target.
We report here on the recent upgrade of the TwinSol radioactive nuclear beam (RNB) facility at the University of Notre Dame. The new TriSol system includes a magnetic dipole to provide a second beamline and a third solenoid which acts to reduce the size of the radioactive beam on target.
△ Less
Submitted 5 October, 2022; v1 submitted 4 October, 2022;
originally announced October 2022.
-
A Robotic Telescope For University-Level Distance Teaching
Authors:
Ulrich Kolb,
Marcus Brodeur,
Nick Braithwaite,
Shailey Minocha
Abstract:
We present aspects of the deployment of a remotely operable telescope for teaching practical science to distance learning undergraduate students. We briefly describe the technical realization of the facility, PIRATE, in Mallorca and elaborate on how it is embedded in the Open University curriculum. The PIRATE teaching activities were studied as part of a wider research project into the importance…
▽ More
We present aspects of the deployment of a remotely operable telescope for teaching practical science to distance learning undergraduate students. We briefly describe the technical realization of the facility, PIRATE, in Mallorca and elaborate on how it is embedded in the Open University curriculum. The PIRATE teaching activities were studied as part of a wider research project into the importance of realism, sociability and meta-functionality for the effectiveness of virtual and remote laboratories in teaching practical science. We find that students accept virtual experiments (e.g. a telescope simulator) when they deliver genuine, 'messy' data, clarify how they differ from a realistic portrayal, and are flagged as training tools. A robotic telescope is accepted in place of on-site practical work when realistic activities are included, the internet connection is stable, and when there is at least one live video feed. The robotic telescope activity should include group work and facilitate social modes of learning. Virtual experiments, though normally considered as asynchronous tools, should also include social interaction. To improve student engagement and learning outcomes a greater situational awareness for the robotic telescope setting should be devised. We conclude this report with a short account of the current status of PIRATE after its relocation from Mallorca to Tenerife, and its integration into the OpenScience Observatories.
△ Less
Submitted 8 June, 2018;
originally announced June 2018.
-
Status of the NSCL Cyclotron Gas Stopper
Authors:
N. Joshi,
G. Bollen,
M. Brodeur,
D. J. Morrissey,
S. Schwarz
Abstract:
A gas-filled reverse cyclotron for the thermalisation of energetic beams is under construction at NSCL/MSU. Rare isotopes produced via projectile fragmentation after in-flight separation will be injected into the device and converted into low-energy beams through buffer gas interactions as they spiral towards the centre of the device. The extracted thermal beams will be used for low energy experim…
▽ More
A gas-filled reverse cyclotron for the thermalisation of energetic beams is under construction at NSCL/MSU. Rare isotopes produced via projectile fragmentation after in-flight separation will be injected into the device and converted into low-energy beams through buffer gas interactions as they spiral towards the centre of the device. The extracted thermal beams will be used for low energy experiments such as precision mass measurements with traps or laser spectroscopy, and further transport for reacceleration. Detailed calculations have been performed to optimize the magnetic field design as well as the transport and stopping of ions inside the gas. An RF carpet will be used to transport the thermal ions to the axial extraction point. The calculations indicate that the cyclotron gas stopper will be much more efficient for the thermalisation of light and medium mass ions compared to linear gas cells. In this contribution we will discuss simulations of the overall performance and acceptance of machine, the beam matching calculations to the fragment separator emittance, and the construction status.
△ Less
Submitted 15 June, 2016;
originally announced June 2016.
-
Trapped-ion decay spectroscopy towards the determination of ground-state components of double-beta decay matrix elements
Authors:
T. Brunner,
A. Lapierre,
C. Andreoiu,
M. Brodeur,
P. Delheji,
S. Ettenauer,
D. Frekers,
A. T. Gallant,
R. Gernhäuser,
A. Grossheim,
R. Krücken,
A. Lennarz,
D. Lunney,
D. Mücher,
R. Ringle,
M. C. Simon,
V. V. Simon,
S. K. L. Sjue,
K. Zuber,
J. Dilling
Abstract:
A new technique has been developed at TRIUMF's TITAN facility to perform in-trap decay spectroscopy. The aim of this technique is to eventually measure weak electron capture branching ratios (ECBRs) and by this to consequently determine GT matrix elements of $ββ$ decaying nuclei. These branching ratios provide important input to the theoretical description of these decays. The feasibility and powe…
▽ More
A new technique has been developed at TRIUMF's TITAN facility to perform in-trap decay spectroscopy. The aim of this technique is to eventually measure weak electron capture branching ratios (ECBRs) and by this to consequently determine GT matrix elements of $ββ$ decaying nuclei. These branching ratios provide important input to the theoretical description of these decays. The feasibility and power of the technique is demonstrated by measuring the ECBR of $^{124}$Cs.
△ Less
Submitted 15 October, 2013;
originally announced October 2013.
-
Verifying the accuracy of the TITAN Penning-trap mass spectrometer
Authors:
M. Brodeur,
V. L. Ryjkov,
T. Brunner,
S. Ettenauer,
A. T. Gallant,
V. V. Simon,
M. J. Smith,
A. Lapierre,
R. Ringle,
P. Delheij,
M. Good,
D. Lunney,
J. Dilling
Abstract:
TITAN (TRIUMF's Ion Traps for Atomic and Nuclear science) is an online facility designed to carry out high-precision mass measurements on singly and highly charged radioactive ions. The TITAN Penning trap has been built and optimized in order to perform such measurements with an accuracy in the sub ppb-range. A detailed characterization of the TITAN Penning trap is presented and a new compensation…
▽ More
TITAN (TRIUMF's Ion Traps for Atomic and Nuclear science) is an online facility designed to carry out high-precision mass measurements on singly and highly charged radioactive ions. The TITAN Penning trap has been built and optimized in order to perform such measurements with an accuracy in the sub ppb-range. A detailed characterization of the TITAN Penning trap is presented and a new compensation method is derived and demonstrated, verifying the performance in the range of sub-ppb.
△ Less
Submitted 4 November, 2011; v1 submitted 13 October, 2011;
originally announced October 2011.
-
First Use of High Charge States for Mass Measurements of Short-lived Nuclides in a Penning Trap
Authors:
S. Ettenauer,
M. C. Simon,
A. T. Gallant,
T. Brunner,
U. Chowdhury,
V. V. Simon,
M. Brodeur,
A. Chaudhuri,
E. Mané,
C. Andreoiu,
G. Audi,
J. R. Crespo López-Urrutia,
P. Delheij,
G. Gwinner,
A. Lapierre,
D. Lunney,
M. R. Pearson,
R. Ringle,
J. Ullrich,
J. Dilling
Abstract:
Penning trap mass measurements of short-lived nuclides have been performed for the first time with highly-charged ions (HCI), using the TITAN facility at TRIUMF. Compared to singly-charged ions, this provides an improvement in experimental precision that scales with the charge state q. Neutron-deficient Rb-isotopes have been charge bred in an electron beam ion trap to q = 8 - 12+ prior to injectio…
▽ More
Penning trap mass measurements of short-lived nuclides have been performed for the first time with highly-charged ions (HCI), using the TITAN facility at TRIUMF. Compared to singly-charged ions, this provides an improvement in experimental precision that scales with the charge state q. Neutron-deficient Rb-isotopes have been charge bred in an electron beam ion trap to q = 8 - 12+ prior to injection into the Penning trap. In combination with the Ramsey excitation scheme, this unique setup creating low energy, highly-charged ions at a radioactive beam facility opens the door to unrivalled precision with gains of 1-2 orders of magnitude. The method is particularly suited for short-lived nuclides such as the superallowed β emitter 74Rb (T1/2 = 65 ms). The determination of its atomic mass and an improved QEC-value are presented.
△ Less
Submitted 15 September, 2011;
originally announced September 2011.
-
TITAN's Digital RFQ Ion Beam Cooler and Buncher, Operation and Performance
Authors:
T. Brunner,
M. J. Smith,
M. Brodeur,
S. Ettenauer,
A. T. Gallant,
V. V. Simon,
A. Chaudhuri A. Lapierre,
E. Mané,
R. Ringle,
M. C. Simon,
J. A. Vaz,
P. Delheij,
M. Good,
M. R. Pearson,
J. Dilling
Abstract:
We present a description of the Radio Frequency Quadrupole (RFQ) ion trap built as part of the TITAN facility. It consists of a gas-filled, segmented, linear Paul trap and is the first stage of the TITAN setup with the purpose of cooling and bunching radioactive ion beams delivered from ISAC-TRIUMF. This is the first such device to be driven digitally, i.e., using a high voltage (…
▽ More
We present a description of the Radio Frequency Quadrupole (RFQ) ion trap built as part of the TITAN facility. It consists of a gas-filled, segmented, linear Paul trap and is the first stage of the TITAN setup with the purpose of cooling and bunching radioactive ion beams delivered from ISAC-TRIUMF. This is the first such device to be driven digitally, i.e., using a high voltage ($V_{pp} = \rm{400 \, V}$), wide bandwidth ($0.2 < f < 1.2 \, \rm{MHz}$) square-wave as compared to the typical sinusoidal wave form. Results from the commissioning of the device as well as systematic studies with stable and radioactive ions are presented including efficiency measurements with stable $^{133}$Cs and radioactive $^{124, 126}$Cs. A novel and unique mode of operation of this device is also demonstrated where the cooled ion bunches are extracted in reverse mode, i.e., in the same direction as previously injected.
△ Less
Submitted 7 February, 2012; v1 submitted 12 July, 2011;
originally announced July 2011.