-
Modelling and design of highly coupled piezoelectric energy harvesters for broadband applications
Authors:
D Gibus,
P. Gasnier,
A. Morel,
S. Boisseau,
A. Badel
Abstract:
This paper reports a method to design highly coupled piezoelectric energy harvesters with frequency tuning capabilities using nonlinear electrical techniques. A cantilever beam with two PMN-PT patches has been optimized thanks to both analytical modelling and Finite Element Methods (FEM). The built prototype exhibits a strong electromechanical coupling (k${}^2$=17.6%) and a figure of merit (km…
▽ More
This paper reports a method to design highly coupled piezoelectric energy harvesters with frequency tuning capabilities using nonlinear electrical techniques. A cantilever beam with two PMN-PT patches has been optimized thanks to both analytical modelling and Finite Element Methods (FEM). The built prototype exhibits a strong electromechanical coupling (k${}^2$=17.6%) and a figure of merit (km${}^2$Q=12.4) which allow a bandwidth corresponding to 22% of the resonant frequency value.
△ Less
Submitted 14 March, 2019;
originally announced March 2019.
-
Potential of electrostatic micro wind turbines
Authors:
Matthias Perez,
Sebastien Boisseau,
Nicolas Perez,
Jean-Luc Reboud
Abstract:
This paper presents the physical operating principles of several micro wind turbines based on different aerodynamic forces: drag-type Vertical Axis Wind Turbine (VAWT) and lift-type Horizontal Axis Wind Turbine (HAWT). All these devices share the similarity of exploiting the same mechanical-to-electrical conversion: the electrostatic conversion. This type of conversion is based on capacitance vari…
▽ More
This paper presents the physical operating principles of several micro wind turbines based on different aerodynamic forces: drag-type Vertical Axis Wind Turbine (VAWT) and lift-type Horizontal Axis Wind Turbine (HAWT). All these devices share the similarity of exploiting the same mechanical-to-electrical conversion: the electrostatic conversion. This type of conversion is based on capacitance variations induced by the motion between a rotor and a stator and requires a source of polarization. We will focus our study on two technologies to polarize the capacitive structure: the use of electrets and the exploitation of triboelectricity. Some experiments conducted in a low-speed wind tunnel between 0 and 20m.s-1 have highlighted power flux densities from 0 to 150μW.cm-2 corresponding to power coefficients of 0 and 9% respectively. Among these results, we can especially retain an ultralow speed operation, which has never been reached until now, in terms of speed and efficiency (9% of efficiency at 1m.s-1). Finally, we will end up comparing different types of circuits to supply a temperature/acceleration sensor, in order to complete the energy harvesting chain.
△ Less
Submitted 15 October, 2018; v1 submitted 12 October, 2018;
originally announced October 2018.
-
Bimetal-and-electret-based thermal energy harvesters - Application to a battery-free Wireless Sensor Node
Authors:
S. Boisseau,
P. Gasnier,
S. Monfray,
G. Despesse,
O. Puscasu,
A. Arnaud,
T. Skotnicki
Abstract:
This paper introduces a thermal energy harvester turning thermal gradients into electricity by coupling a bimetallic strip to an electret-based converter: the bimetallic strip behaves as a thermal-to-mechanical power converter turning thermal gradients into mechanical oscillations that are finally converted into electricity with the electret. Output powers of 5.4uW were reached on a hot source at…
▽ More
This paper introduces a thermal energy harvester turning thermal gradients into electricity by coupling a bimetallic strip to an electret-based converter: the bimetallic strip behaves as a thermal-to-mechanical power converter turning thermal gradients into mechanical oscillations that are finally converted into electricity with the electret. Output powers of 5.4uW were reached on a hot source at 70°C, and, contrary to the previous proofs of concept, the new devices presented in this paper do not require forced convection to work, making them compatible with standard conditions of thermal energy harvesting and environments such as hot pipes, pumps and more generally industrial equipment. Finally, ten energy harvesters have been parallelized and combined to a self-starting power management circuit made of a flyback converter to supply a battery-free Wireless Temperature Sensor Node, sending information every 100 seconds after its startup state.
△ Less
Submitted 10 October, 2013;
originally announced October 2013.
-
Semi-flexible bimetal-based thermal energy harvesters
Authors:
S Boisseau,
G. Despesse,
S. Monfray,
O. Puscasu,
T. Skotnicki
Abstract:
This paper introduces a new semi-flexible device able to turn thermal gradients into electricity by using a curved bimetal coupled to an electret-based converter. In fact, a two-steps conversion is carried out: (i) a curved bimetal turns the thermal gradient into a mechanical oscillation that is then (ii) converted into electricity thanks to an electrostatic converter using electrets in Teflon (r)…
▽ More
This paper introduces a new semi-flexible device able to turn thermal gradients into electricity by using a curved bimetal coupled to an electret-based converter. In fact, a two-steps conversion is carried out: (i) a curved bimetal turns the thermal gradient into a mechanical oscillation that is then (ii) converted into electricity thanks to an electrostatic converter using electrets in Teflon (r). The semi-flexible and low cost design of these new energy converters pave the way to mass production over large areas of thermal energy harvesters. Raw output powers up to 13.46uW per device were reached on a hot source at 60°C and forced convection. Then, a DC-to-DC flyback converter has been sized to turn the energy harvesters' raw output powers into a viable supply source for an electronic circuit (DC-3V). At the end, 10uW of directly usable output power were reached with 3 devices, which is compatible with Wireless Sensor Networks powering applications.
Please cite as : S Boisseau et al 2013 Smart Mater. Struct. 22 025021 Available online at: http://iopscience.iop.org/0964-1726/22/2/025021/
△ Less
Submitted 28 January, 2013;
originally announced January 2013.
-
A bimetal and electret-based converter for thermal energy harvesting
Authors:
S. Boisseau,
G. Despesse,
S. Monfray,
O. Puscasu,
T. Skotnicki
Abstract:
This paper presents a new device able to turn thermal gradients into electricity by using a bimetal-based heat engine coupled to an electrostatic converter. A two-steps conversion is performed: (i) a curved bimetallic strip turns the thermal gradient into a mechanical movement (thermal-to-mechanical conversion) that is (ii) then converted into electricity thanks to an electret-based electrostatic…
▽ More
This paper presents a new device able to turn thermal gradients into electricity by using a bimetal-based heat engine coupled to an electrostatic converter. A two-steps conversion is performed: (i) a curved bimetallic strip turns the thermal gradient into a mechanical movement (thermal-to-mechanical conversion) that is (ii) then converted into electricity thanks to an electret-based electrostatic converter (mechanical-to-electrical conversion). An output power up to 5.5uW on a hot source at 50°C has already been reached, validating this new concept.
△ Less
Submitted 4 December, 2012;
originally announced December 2012.
-
Electrostatic Conversion for Vibration Energy Harvesting
Authors:
S. Boisseau,
G. Despesse,
B. Ahmed Seddik
Abstract:
This chapter focuses on vibration energy harvesting using electrostatic converters. It synthesizes the various works carried out on electrostatic devices, from concepts, models and up to prototypes, and covers both standard (electret-free) and electret-based electrostatic vibration energy harvesters (VEH).
This chapter focuses on vibration energy harvesting using electrostatic converters. It synthesizes the various works carried out on electrostatic devices, from concepts, models and up to prototypes, and covers both standard (electret-free) and electret-based electrostatic vibration energy harvesters (VEH).
△ Less
Submitted 16 October, 2012;
originally announced October 2012.
-
Optimization of an electret-based energy harvester
Authors:
S. Boisseau,
G. Despesse,
A. Sylvestre
Abstract:
Thanks to miniaturisation, it is today possible to imagine self-powered systems that use vibrations to produce their own electrical energy. Many energy-harvesting systems already exist. Some of them are based on the use of electrets: electrically charged dielectrics that can keep charges for years. This paper presents an optimisation of an existing system and proves that electret-based electrostat…
▽ More
Thanks to miniaturisation, it is today possible to imagine self-powered systems that use vibrations to produce their own electrical energy. Many energy-harvesting systems already exist. Some of them are based on the use of electrets: electrically charged dielectrics that can keep charges for years. This paper presents an optimisation of an existing system and proves that electret-based electrostatic energy scavengers can be excellent solutions to power microsystems even with low-level ambient vibrations. Thereby, it is possible to harvest up to 200\muW with vibrations lower than 1G of acceleration (typically 50\mumpp at 50Hz) using thin SiO2 electrets with an active surface of 1 cm^{2} and a mobile mass of 1g. This paper optimises such a system (geometric, electrostatic and mechanical parameters), using FEM (Finite Element Method) software (Comsol Multiphysics) and Matlab to compute the parameters and proves the importance of such an optimisation to build efficient systems. Finally, it shows that the use of electrets with high surface potential is not always the best way to maximise output power.
△ Less
Submitted 10 November, 2011;
originally announced November 2011.
-
Cantilever-based electret energy harvesters
Authors:
S. Boisseau,
G. Despesse,
T. Ricart,
E. Defay,
A. Sylvestre
Abstract:
Integration of structures and functions allowed reducing electric consumptions of sensors, actuators and electronic devices. Therefore, it is now possible to imagine low-consumption devices able to harvest their energy in their surrounding environment. One way to proceed is to develop converters able to turn mechanical energy, such as vibrations, into electricity: this paper focuses on electrostat…
▽ More
Integration of structures and functions allowed reducing electric consumptions of sensors, actuators and electronic devices. Therefore, it is now possible to imagine low-consumption devices able to harvest their energy in their surrounding environment. One way to proceed is to develop converters able to turn mechanical energy, such as vibrations, into electricity: this paper focuses on electrostatic converters using electrets. We develop an accurate analytical model of a simple but efficient cantilever-based electret energy harvester. Therefore, we prove that with vibrations of 0.1g (~1m/s^{2}), it is theoretically possible to harvest up to 30\muW per gram of mobile mass. This power corresponds to the maximum output power of a resonant energy harvester according to the model of William and Yates. Simulations results are validated by experimental measurements but the issues of parasitic capacitances get a large impact. Therefore, we 'only' managed to harvest 10\muW per gram of mobile mass, but according to our factor of merit, this puts us in the best results of the state of the art. http://iopscience.iop.org/0964-1726/20/10/105013
△ Less
Submitted 10 November, 2011;
originally announced November 2011.
-
Electret-based cantilever energy harvester: design and optimization
Authors:
S. Boisseau,
G. Despesse,
A. Sylvestre
Abstract:
We report in this paper the design, the optimization and the fabrication of an electret-based cantilever energy harvester. We develop the mechanical and the electrostatic equations of such a device and its implementation using Finite Elements (FEM) and Matlab in order to get an accurate model. This model is then used in an optimization process. A macroscopic prototype (3.2cm^{2}) was built with a…
▽ More
We report in this paper the design, the optimization and the fabrication of an electret-based cantilever energy harvester. We develop the mechanical and the electrostatic equations of such a device and its implementation using Finite Elements (FEM) and Matlab in order to get an accurate model. This model is then used in an optimization process. A macroscopic prototype (3.2cm^{2}) was built with a silicon cantilever and a Teflon\textregistered electret. Thanks to this prototype, we manage to harvest 17\muW with ambient-type vibrations of 0.2g on a load of 210MΩ. The experimental results are consistent with simulation results.
△ Less
Submitted 10 November, 2011;
originally announced November 2011.
