Additive manufacturing of a 3D-segmented plastic scintillator detector for tracking and calorimetry of elementary particles
Authors:
Tim Weber,
Andrey Boyarintsev,
Umut Kose,
Boato Li,
Davide Sgalaberna,
Tetiana Sibilieva,
Siddartha Berns,
Eric Boillat,
Albert De Roeck,
Till Dieminger,
Stephen Dolan,
Matthew Franks,
Boris Grynyov,
Sylvain Hugon,
Carsten Jaeschke,
André Rubbia
Abstract:
Plastic-scintillator detectors are devices used for the detection of elementary particles. They provide good particle identification with excellent time resolution, whilst being inexpensive due to the affordability of plastic materials. Particle tracking is achieved by segmenting the scintillator into smaller optically-isolated 3D granular sub-structures which require the integration of multiple t…
▽ More
Plastic-scintillator detectors are devices used for the detection of elementary particles. They provide good particle identification with excellent time resolution, whilst being inexpensive due to the affordability of plastic materials. Particle tracking is achieved by segmenting the scintillator into smaller optically-isolated 3D granular sub-structures which require the integration of multiple types of plastic materials as well as several thousands of tiny holes through a compact volume of several cubic meters. Future particle detectors necessitate larger volumes, possibly with even finer segmentation. However, manufacturing such geometries with current production strategies is challenging, as they involve time-consuming and costly fabrication processes, followed by the assembly of millions of individual parts. The difficulty in scaling up such a workflow can be addressed by additive manufacturing, enabling the construction of complex, monolithic geometries in a single operation. This article presents the fabrication of the first additive manufactured plastic scintillator detector, capable of 3D tracking elementary particles and measuring their stopping power. Its performance is comparable to the state of the art of plastic scintillator detectors. This work paves the way towards a new feasible, time and cost-effective process for the production of future plastic-based scintillator detectors, regardless their size and difficulty in geometry.
△ Less
Submitted 12 June, 2024; v1 submitted 7 December, 2023;
originally announced December 2023.
A novel polystyrene-based scintillator production process involving additive manufacturing
Authors:
S. Berns,
A. Boyarintsev,
S. Hugon,
U. Kose,
D. Sgalaberna,
A. De Roeck,
A. Lebedynskiy,
T. Sibilieva,
P. Zhmurin
Abstract:
Plastic scintillator detectors are widely used in particle physics thanks to the very good particle identification, tracking capabilities and time resolution. However, new experimental challenges and the need for enhanced performance require the construction of detector geometries that are complicated using the current production techniques. In this article we propose a new production technique ba…
▽ More
Plastic scintillator detectors are widely used in particle physics thanks to the very good particle identification, tracking capabilities and time resolution. However, new experimental challenges and the need for enhanced performance require the construction of detector geometries that are complicated using the current production techniques. In this article we propose a new production technique based on additive manufacturing that aims to 3D print polystyrene-based scintillator. The production process and the results of the scintillation light output measurement of the 3D-printed scintillator are reported.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.