Showing 1–12 of 12 results for author: Shoji, M

Commissioning of a compact multibend achromat lattice: A new 3 GeV synchrotron radiation facility

Authors: Shuhei Obara, Kota Ueshima, Takao Asaka, Yuji Hosaka, Koichi Kan, Nobuyuki Nishimori, Toshitaka Aoki, Hiroyuki Asano, Koichi Haga, Yuto Iba, Akira Ihara, Katsumasa Ito, Taiki Iwashita, Masaya Kadowaki, Rento Kanahama, Hajime Kobayashi, Hideki Kobayashi, Hideo Nishihara, Masaaki Nishikawa, Haruhiko Oikawa, Ryota Saida, Keisuke Sakuraba, Kento Sugimoto, Masahiro Suzuki, Kouki Takahashi , et al. (57 additional authors not shown)

Abstract: NanoTerasu, a new 3 GeV synchrotron light source in Japan, began user operation in April 2024. It provides high-brilliance soft to tender X-rays and covers a wide spectral range from ultraviolet to tender X-rays. Its compact storage ring with a circumference of 349 m is based on a four-bend achromat lattice to provide two straight sections in each cell for insertion devices with a natural horizont… ▽ More NanoTerasu, a new 3 GeV synchrotron light source in Japan, began user operation in April 2024. It provides high-brilliance soft to tender X-rays and covers a wide spectral range from ultraviolet to tender X-rays. Its compact storage ring with a circumference of 349 m is based on a four-bend achromat lattice to provide two straight sections in each cell for insertion devices with a natural horizontal emittance of 1.14 nm rad, which is small enough for soft X-rays users. The NanoTerasu accelerator incorporates several innovative technologies, including a full-energy injector C-band linear accelerator with a length of 110 m, an in-vacuum off-axis injection system, a four-bend achromat with B-Q combined bending magnets, and a TM020 mode accelerating cavity with built-in higher-order-mode dampers in the storage ring. This paper presents the accelerator machine commissioning over a half-year period and our model-consistent ring optics correction. The first user operation with a stored beam current of 160 mA is also reported. We summarize the storage ring parameters obtained from the commissioning. This is helpful for estimating the effective optical properties of synchrotron radiation at NanoTerasu. △ Less

Submitted 11 July, 2024; originally announced July 2024.

Comments: 30 pages, 24 figures, submitted to the journal

The quality assurance test of the SliT ASIC for the J-PARC muon $g-2$/EDM experiment

Authors: Takashi Yamanaka, Yoichi Fujita, Eitaro Hamada, Tetsuichi Kishishita, Tsutomu Mibe, Yutaro Sato, Yoshiaki Seino, Masayoshi Shoji, Taikain Suehara, Manobu M. Tanaka, Junji Tojo, Keisuke Umebayashi, Tamaki Yoshioka

Abstract: The SliT ASIC is a readout chip for the silicon strip detector to be used at the J-PARC muon $g-2$/EDM experiment. The production version of SliT128D was designed and mass production was finished. A quality assurance test method for bare SliT128D chips was developed to provide a sufficient number of chips for the experiment. The quality assurance test of the SliT128D chips was performed and 5735 c… ▽ More The SliT ASIC is a readout chip for the silicon strip detector to be used at the J-PARC muon $g-2$/EDM experiment. The production version of SliT128D was designed and mass production was finished. A quality assurance test method for bare SliT128D chips was developed to provide a sufficient number of chips for the experiment. The quality assurance test of the SliT128D chips was performed and 5735 chips were inspected. No defect was observed in chips of 84.3%. Accepting a few channels with poor time walk performance out of 128 channels per chip, more than 90% yield can be achieved, which is sufficient to construct the whole detector. △ Less

Submitted 22 January, 2024; originally announced January 2024.

Comments: 5 pages, 8 figures

Intermodular Configuration Scrubbing of On-detector FPGAs for the ARICH at Belle II

Authors: R. Giordano, Y. Lai, S. Korpar, R. Pestotnik, A. Lozar, L. Santelj, M. Shoji, S. Nishida

Abstract: On-detector digital electronics in High-Energy Physics experiments is increasingly being implemented by means of SRAM-based FPGA, due to their capabilities of reconfiguration, real-time processing and multi-gigabit data transfer. Radiation-induced single event upsets in the configuration hinder the correct operation, since they may alter the programmed routing paths and logic functions. In most tr… ▽ More On-detector digital electronics in High-Energy Physics experiments is increasingly being implemented by means of SRAM-based FPGA, due to their capabilities of reconfiguration, real-time processing and multi-gigabit data transfer. Radiation-induced single event upsets in the configuration hinder the correct operation, since they may alter the programmed routing paths and logic functions. In most trigger and data acquisition systems, data from several front-end modules are concentrated into a single board, which then transmits data to back-end electronics for acquisition and triggering. Since the front-end modules are identical, they host identical FPGAs, which are programmed with the same bitstream. In this work, we present a novel scrubber capable of correcting radiation-induced soft-errors in the configuration of SRAM-based FPGAs by majority voting across different modules. We show an application of this system to the read-out electronics of the Aerogel Ring Imaging CHerenkov (ARICH) subdetector of the Belle2 experiment at SuperKEKB of the KEK laboratory (Tsukuba, Japan). We discuss the architecture of the system and its implementation in a Virtex-5 LX50T FPGA, in the concentrator board, for correcting the configuration of up to six Spartan-6 LX45 FPGAs, on pertaining front-end modules. We discuss results from fault-injection and neutron irradiation tests at the TRIGA reactor of the Jozef Stefan Institute (Ljubljana, Slovenia) and we compare the performance of our solution to the Xilinx Soft Error Mitigation controller. △ Less

Submitted 30 October, 2020; originally announced October 2020.

Comments: "Accesso Aperto MIUR". This work has been partly funded by the ROAL project (grant no. RBSI14JOUV) of the SIR 2014 program of MIUR. Corresponding author: R. Giordano (email: [email protected])

Study of scintillation light collection, production and propagation in a 4 tonne dual-phase LArTPC

Authors: B. Aimard, L. Aizawa, C. Alt, J. Asaadi, M. Auger, V. Aushev, D. Autiero, A. Balaceanu, G. Balik, L. Balleyguier, E. Bechetoille, D. Belver, A. M. Blebea-Apostu, S. Bolognesi, S. Bordoni, N. Bourgeois, B. Bourguille, J. Bremer, G. Brown, G. Brunetti, L. Brunetti, D. Caiulo, M. Calin, E. Calvo, M. Campanelli , et al. (138 additional authors not shown)

Abstract: The $3 \times 1 \times 1$ m$^3$ demonstrator is a dual phase liquid argon time projection chamber that has recorded cosmic rays events in 2017 at CERN. The light signal in these detectors is crucial to provide precise timing capabilities. The performances of the photon detection system, composed of five PMTs, are discussed. The collected scintillation and electroluminescence light created by passi… ▽ More The $3 \times 1 \times 1$ m$^3$ demonstrator is a dual phase liquid argon time projection chamber that has recorded cosmic rays events in 2017 at CERN. The light signal in these detectors is crucial to provide precise timing capabilities. The performances of the photon detection system, composed of five PMTs, are discussed. The collected scintillation and electroluminescence light created by passing particles has been studied in various detector conditions. In particular, the scintillation light production and propagation processes have been analyzed and compared to simulations, improving the understanding of some liquid argon properties. △ Less

Submitted 20 December, 2020; v1 submitted 16 October, 2020; originally announced October 2020.

Comments: 30 pages, 26 figures

LTARS: Analog Readout Front-end ASIC for Versatile TPC-applications

Authors: Tetsuichi Kishishita, S. Sumomozawa, T. Kosaka, T. Igarashi, K. Sakashita, M. Shoji, M. M. Tanaka, T. Hasegawa, K. Negishi, S. Narita, T. Nakamura, K. Miuchi

Abstract: We designed a versatile analog front-end chip, called LTARS, for TPC-applications, primarily targeted at dual-phase liquid Ar-TPCs for neutrino experiments and negative-ion $μ$-TPCs for directional dark matter searches. Low-noise performance and wide dynamic range are two requirements for reading out the signals induced on the TPC readout channels. One of the development objectives is to establish… ▽ More We designed a versatile analog front-end chip, called LTARS, for TPC-applications, primarily targeted at dual-phase liquid Ar-TPCs for neutrino experiments and negative-ion $μ$-TPCs for directional dark matter searches. Low-noise performance and wide dynamic range are two requirements for reading out the signals induced on the TPC readout channels. One of the development objectives is to establish the analog processing circuits under low temperature operation, which are designed on function block basis as reusable IPs (Intellectual Properties). The newly developed ASIC was implemented in the Silterra 180~nm CMOS technology and has 16 readout channels. We carried out the performance test at room temperature and the results showed an equivalent noise charge of 2695$\pm$71~e$^-$ (rms) with a detector capacitance of 300~pF. The dynamic range was measured to be 20--100~fC in the low-gain mode and 200--1600~fC in the high-gain mode within 10\% integral nonlinearity at room temperature. We also tested the performance at the liquid-Ar temperature and found a deterioration of the noise level with a longer shaper time. Based on these results, we also discuss a unique simulation methodology for future cold-electronics development. This method can be applicable to design the electronics used at low temperature. △ Less

Submitted 17 August, 2020; originally announced August 2020.

Comments: 15 pages, 13 figures, accepted by Jour. Instr

Performance evaluation of the aerogel RICH counter for the Belle II spectrometer using early beam collision data

Authors: M. Yonenaga, I. Adachi, L. Burmistrov, F. Le Diberder, T. Iijima, S. Iwata, S. Kakimoto, H. Kakuno, G. Karyan, H. Kawai, T. Kawasaki, H. Kindo, H. Kitamura, M. Kobayashi, T. Kohriki, T. Konno, S. Korpar, P. Križan, T. Kumita, K. Kuze, Y. Lai, M. Mrvar, G. Nazaryan, S. Nishida, M. Nishimura , et al. (10 additional authors not shown)

Abstract: The Aerogel Ring Imaging Cherenkov (ARICH) counter serves as a particle identification device in the forward end-cap region of the Belle II spectrometer. It is capable of identifying pions and kaons with momenta up to $4 \, {\rm GeV}/c$ by detecting Cherenkov photons emitted in the silica aerogel radiator. After the detector alignment and calibration of the probability density function, we evaluat… ▽ More The Aerogel Ring Imaging Cherenkov (ARICH) counter serves as a particle identification device in the forward end-cap region of the Belle II spectrometer. It is capable of identifying pions and kaons with momenta up to $4 \, {\rm GeV}/c$ by detecting Cherenkov photons emitted in the silica aerogel radiator. After the detector alignment and calibration of the probability density function, we evaluate the performance of the ARICH counter using early beam collision data. Event samples of $D^{\ast +} \to D^0 π^+ (D^0 \to K^-π^+)$ were used to determine the $π(K)$ efficiency and the $K(π)$ misidentification probability. We found that the ARICH counter is capable of separating kaons from pions with an identification efficiency of $93.5 \pm 0.6 \, \%$ at a pion misidentification probability of $10.9 \pm 0.9 \, \%$. This paper describes the identification method of the counter and the evaluation of the performance during its early operation. △ Less

Submitted 14 August, 2020; originally announced August 2020.

Comments: To be published in Prog. Theor. Exp. Phys

SliT: A Strip-sensor Readout Chip with Subnanosecond Time-walk for the J-PARC Muon $g-2$/EDM Experiment

Authors: Tetsuichi Kishishita, Yutaro Sato, Yoichi Fujita, Eitaro Hamada, Tsutomu Mibe, Tsubasa Nagasawa, Shohei Shirabe, Masayoshi Shoji, Taikan Suehara, Manobu M. Tanaka, Junji Tojo, Yuki Tsutumi, Takashi Yamanaka, Tamaki Yoshioka

Abstract: A new silicon-strip readout chip named "SliT" has been developed for the measurement of the muon anomalous magnetic moment and electric dipole moment at J-PARC. The SliT is designed in the Silterra 180 nm CMOS technology with mixed-signal integrated circuits. An analog circuit incorporates a conventional charge-sensitive amplifier, shaping amplifiers, and two distinct discriminators for each of 12… ▽ More A new silicon-strip readout chip named "SliT" has been developed for the measurement of the muon anomalous magnetic moment and electric dipole moment at J-PARC. The SliT is designed in the Silterra 180 nm CMOS technology with mixed-signal integrated circuits. An analog circuit incorporates a conventional charge-sensitive amplifier, shaping amplifiers, and two distinct discriminators for each of 128 identical channels. A digital part includes storage memories, an event building block, a serializer, and LVDS drivers. A distinct feature of the SliT is utilization of the zero-cross architecture, which consists of a CR-RC filter followed by a CR circuit as a voltage differentiator. This architecture enables to generate hit signals with subnanosecond amplitude-independent time walk, which is the primary requirement for the experiment. The test results show the time walk of $0.38 \pm 0.16$ ns between 0.5 and 3 MIP signals. The equivalent noise charge is $1547 \pm 75 $ $e^{-}$ (rms) at $C_{\rm det} = 33$ pF as a strip-sensor capacitance. Other functionalities such as a strip-sensor readout chip have also been proven in the tests. The SliT128C satisfies all requirements of the J-PARC muon $g-2$/EDM experiment. △ Less

Submitted 28 July, 2020; v1 submitted 14 June, 2020; originally announced June 2020.

Comments: 7 pages, 12 figures

Performance evaluation of a silicon strip detector for positrons/electrons from a pulsed a muon beam

Authors: T. Aoyagi, Y. Honda, H. Ikeda, M. Ikeno, K. Kawagoe, T. Kohriki, T. Kume, T. Mibe, K. Namba, S. Nishimura, N. Saito, O. Sasaki, N. Sato, Y. Sato, H. Sendai, K. Shimomura, S. Shirabe, M. Shoji, T. Suda, T. Suehara, T. Takatomi, M. Tanaka, J. Tojo, K. Tsukada, T. Uchida , et al. (4 additional authors not shown)

Abstract: A high-intensity pulsed muon beam is becoming available at the at the Japan Proton Accelerator Research Complex (J-PARC). Many experiments to study fundamental physics using this high-intensity muon beam are proposed. An experiment to measure the muon magnetic moment anomaly ($g-2$) and the muon electric dipole moment (EDM) is one of these experiments and it requires a tracking detector for positr… ▽ More A high-intensity pulsed muon beam is becoming available at the at the Japan Proton Accelerator Research Complex (J-PARC). Many experiments to study fundamental physics using this high-intensity muon beam are proposed. An experiment to measure the muon magnetic moment anomaly ($g-2$) and the muon electric dipole moment (EDM) is one of these experiments and it requires a tracking detector for positrons from muon decay. Fine segmentation is required in a detector to tolerate the high rate of positrons. The time resolution is required to be much better than the muon anomalous spin precession period while a buffer depth of a front-end electronics needs to be much longer than the accelerated muon lifetime. Requirements of this detector also meet requirements of a measurement of the muonium hyperfine structure interval at the J-PARC and another experiment to measure the proton charge radius at Tohoku University. We have developed a single-sided silicon strip sensor with a 190 $μ$m pitch, a front-end electronics with a sampling rate of 200 MHz and a buffer memory depth of 8192, and a data acquisition system based on DAQ-Middleware for the J-PARC muon $g-2$/EDM experiment. We have fabricated detector modules consisting of this sensor and the front-end electronics. Performance of fabricated detector modules was evaluated at a laboratory and a beam test using the positron beam at Tohoku University. The detector is confirmed to satisfy all requirements of the experiments except for the time walk, which will be solved by the next version of a front-end electronics. △ Less

Submitted 7 May, 2020; v1 submitted 29 October, 2019; originally announced October 2019.

Comments: 18 pages, 17 figures

Journal ref: JINST 15 (2020) P04027

J-PARC Neutrino Beamline Upgrade Technical Design Report

Authors: K. Abe, H. Aihara, A. Ajmi, C. Alt, C. Andreopoulos, M. Antonova, S. Aoki, Y. Asada, Y. Ashida, A. Atherton, E. Atkin, S. Ban, F. C. T. Barbato, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz, A. Beloshapkin, V. Berardi, L. Berns, S. Bhadra, J. Bian, S. Bienstock, A. Blondel, S. Bolognesi , et al. (360 additional authors not shown)

Abstract: In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neut… ▽ More In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neutrino beam intensity, which are necessary to achieve the proposed data increase, are described. △ Less

Submitted 14 August, 2019; originally announced August 2019.

Prototype Front-end ASIC for Silicon-strip Detectors of J-PARC Muon g-2/EDM Experiment

Authors: Yuki Tsutsumi, Tetsuichi Kishishita, Yutaro Sato, Masayoshi Shoji, Manobu M. Tanaka, Tsutomu Mibe, Junji Tojo

Abstract: We report on the development of a front-end ASIC for silicon-strip detectors of the J-PARC Muon g-2/EDM experiment. This experiment aims to measure the muon anomalous magnetic moment and electric dipole moment precisely to explore new physics beyond the Standard Model. Since the time and momentum of positrons from muon decay are key information in the experiment, a fast response with high granular… ▽ More We report on the development of a front-end ASIC for silicon-strip detectors of the J-PARC Muon g-2/EDM experiment. This experiment aims to measure the muon anomalous magnetic moment and electric dipole moment precisely to explore new physics beyond the Standard Model. Since the time and momentum of positrons from muon decay are key information in the experiment, a fast response with high granularity is demanded to silicon-strip detectors as the positron tracker. The readout ASIC is thus required to tolerate a high hit rate of 1.4 MHz per strip and to have deep memory for the period of 40 us with 5 ns time resolution. To satisfy the experimental requirements, an analog prototype ASIC was newly designed with the Silterra 180 nm CMOS technology. In the evaluation test, the time-walk was demonstrated to reach 0.8~ns with a sufficient dynamic range of 6~MIPs and pulse width of 45~ns for 1 MIP event. The design details and performance of the ASIC are discussed in this article. △ Less

Submitted 29 January, 2019; originally announced January 2019.

Comments: 4 pages, 3 figures, proceeding of TWEPP2018

A New Approach for Measuring the Muon Anomalous Magnetic Moment and Electric Dipole Moment

Authors: M. Abe, S. Bae, G. Beer, G. Bunce, H. Choi, S. Choi, M. Chung, W. da Silva, S. Eidelman, M. Finger, Y. Fukao, T. Fukuyama, S. Haciomeroglu, K. Hasegawa, K. Hayasaka, N. Hayashizaki, H. Hisamatsu, T. Iijima, H. Iinuma, K. Inami, H. Ikeda, M. Ikeno, K. Ishida, T. Itahashi, M. Iwasaki , et al. (71 additional authors not shown)

Abstract: This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon… ▽ More This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon $g-2$ experiments with unprecedented quality of the storage magnetic field. Additional significant differences from the present experimental method include a factor of 1,000 smaller transverse emittance of the muon beam (reaccelerated thermal muon beam), its efficient vertical injection into the solenoid, and tracking each decay positron from muon decay to obtain its momentum vector. The precision goal for $a_μ$ is statistical uncertainty of 450 part per billion (ppb), similar to the present experimental uncertainty, and a systematic uncertainty less than 70 ppb. The goal for EDM is a sensitivity of $1.5\times 10^{-21}~e\cdot\mbox{cm}$. △ Less

Submitted 10 March, 2019; v1 submitted 10 January, 2019; originally announced January 2019.

Comments: 24 pages, 14 figures

A 4 tonne demonstrator for large-scale dual-phase liquid argon time projection chambers

Authors: B. Aimard, Ch. Alt, J. Asaadi, M. Auger, V. Aushev, D. Autiero, M. M. Badoi, A. Balaceanu, G. Balik, L. Balleyguier, E. Bechetoille, D. Belver, A. M. Blebea-Apostu, S. Bolognesi, S. Bordoni, N. Bourgeois, B. Bourguille, J. Bremer, G. Brown, G. Brunetti, L. Brunetti, D. Caiulo, M. Calin, E. Calvo, M. Campanelli , et al. (147 additional authors not shown)

Abstract: A 10 kilo-tonne dual-phase liquid argon TPC is one of the detector options considered for the Deep Underground Neutrino Experiment (DUNE). The detector technology relies on amplification of the ionisation charge in ultra-pure argon vapour and oers several advantages compared to the traditional single-phase liquid argon TPCs. A 4.2 tonne dual-phase liquid argon TPC prototype, the largest of its kin… ▽ More A 10 kilo-tonne dual-phase liquid argon TPC is one of the detector options considered for the Deep Underground Neutrino Experiment (DUNE). The detector technology relies on amplification of the ionisation charge in ultra-pure argon vapour and oers several advantages compared to the traditional single-phase liquid argon TPCs. A 4.2 tonne dual-phase liquid argon TPC prototype, the largest of its kind, with an active volume of 3x1x1 $m^3$ has been constructed and operated at CERN. In this paper we describe in detail the experimental setup and detector components as well as report on the operation experience. We also present the first results on the achieved charge amplification, prompt scintillation and electroluminescence detection, and purity of the liquid argon from analyses of a collected sample of cosmic ray muons. △ Less

Submitted 19 October, 2018; v1 submitted 8 June, 2018; originally announced June 2018.