Development of High Granular Neutron Time-of-Flight Detector for the BM@N experiment
Authors:
F. Guber,
D. Finogeev,
M. Golubeva,
A. Ivashkin,
A. Izvestnyy,
N. Karpushkin,
A. Makhnev,
D. Lyapin,
M. Mamaev,
S. Morozov,
P. Parfenov,
A. Shabanov,
D. Serebryakov,
A. Zubankov
Abstract:
The HGND (High Granular Neutron Detector) is developed for the BM@N (Baryonic Matter at Nuclotron) experiment on the extracted beam of the Nuclotron at JINR, Dubna. The HGND will be used to measure the azimuthal flow of neutrons produced with energies ranging from 300 to 4000 MeV in heavy-ion collisions at beam energies of 2--4 AGeV. The azimuthal flow of charged particles will be measured using t…
▽ More
The HGND (High Granular Neutron Detector) is developed for the BM@N (Baryonic Matter at Nuclotron) experiment on the extracted beam of the Nuclotron at JINR, Dubna. The HGND will be used to measure the azimuthal flow of neutrons produced with energies ranging from 300 to 4000 MeV in heavy-ion collisions at beam energies of 2--4 AGeV. The azimuthal flow of charged particles will be measured using the BM@N magnet spectrometer. The data on the azimuthal flow of neutrons will shed light on the study of the high-density Equation of State (EoS) of isospin-symmetric nuclear matter, which is crucial for studying astrophysical phenomena such as neutron stars and their mergers. The HGND has a highly granular structure with approximately 2000 plastic scintillation detectors (cells), each measuring 4$\times$4$\times$2.5 cm$^3$. These detectors are arranged in 16 layers, with 121 detectors in each layer, and are subdivided by copper absorber plates with a thickness of 3 cm. The light from each cell is detected with SiPM (Silicon Photomultiplier) with an active area of 6$\times$6 mm$^2$. Developed multi-channel TDC board based on the Kintex FPGA chip with a bin width of 100 ps will be used to perform precise timestamp and amplitude measurement using Time-over-Threshold (ToT) method. Good spatial resolution due to the high granularity together with a cell's time resolution of 100-150 ps ensures neutron reconstruction with good energy resolution. The design of the detector as well as the results from test measurements and simulations have been presented.
△ Less
Submitted 8 October, 2023; v1 submitted 18 September, 2023;
originally announced September 2023.
Analytical description of the time-over-threshold method based on the time properties of plastic scintillators equipped with silicon photomultipliers
Authors:
N. Karpushkin,
D. Finogeev,
F. Guber,
D. Lyapin,
A. Makhnev,
S. Morozov,
D. Serebryakov
Abstract:
A new high-granular compact time-of-flight neutron detector for the identification and energy measurement of neutrons produced in nucleus-nucleus interactions at the BM@N experiment, Dubna, Russia, at energies up to 4 AGeV is under development. The detector consists of approximately 2000 fast plastic scintillators, each with dimensions of 40$\times$40$\times$25 mm$^3$, equiped with SiPM (Silicon P…
▽ More
A new high-granular compact time-of-flight neutron detector for the identification and energy measurement of neutrons produced in nucleus-nucleus interactions at the BM@N experiment, Dubna, Russia, at energies up to 4 AGeV is under development. The detector consists of approximately 2000 fast plastic scintillators, each with dimensions of 40$\times$40$\times$25 mm$^3$, equiped with SiPM (Silicon Photomultiplier) with an active area of 6$\times$6 mm$^2$. The signal readout from these scintillators will employ a single-threshold multichannel Time-to-Digital Converter (TDC) to measure their response time and amplitude using the time-over-threshold (ToT) method. This article focuses on the analytical description of the signals from the plastic scintillator detectors equipped with silicon photomultipliers. This description is crucial for establishing the ToT-amplitude relationship and implementing slewing correction techniques to improve the time resolution of the detector. The methodology presented in this paper demonstrates that a time resolution at the 70 ps level can be achieved for the fast plastic scintillator coupled with silicon photomultiplier with epitaxial quenching resistors.
△ Less
Submitted 16 August, 2024; v1 submitted 16 August, 2023;
originally announced August 2023.
