-
Exploring the intrinsic energy resolution of liquid scintillator to approximately 1 MeV electrons
Authors:
Y. Deng,
X. Sun,
B. Qi,
J. Li,
W. Yan,
L. Li,
H. Jiang,
C. Wang,
X. Cai,
T. Hu,
J. Fang,
X. Fan,
F. Gu,
J. Lv,
X. Ling,
G. Qu,
X. Qi,
L. Sun,
L. Zhou,
B. Yu,
Y. Xie,
J. Ye,
Z. Zhu,
Y. Zh,
G. Zuo
Abstract:
We proposed a novel method for exploring the intrinsic energy resolution of a liquid scintillator (LAB + 2.5 g/L PPO + 3 mg/L bis-MSB) for approximately 1 MeV electrons. With the help of coincidence detection technology, single-energy electrons of Bi 207 were effectively selected. With careful measurement and analysis of the energy resolution of a small liquid scintillator detector, the intrinsic…
▽ More
We proposed a novel method for exploring the intrinsic energy resolution of a liquid scintillator (LAB + 2.5 g/L PPO + 3 mg/L bis-MSB) for approximately 1 MeV electrons. With the help of coincidence detection technology, single-energy electrons of Bi 207 were effectively selected. With careful measurement and analysis of the energy resolution of a small liquid scintillator detector, the intrinsic energy resolution to 976 keV electrons was extracted to be 1.83%. We used the wide-angle Compton coincidence (WACC) method to measure the luminescent nonlinearity of the liquid scintillator and found that it contributes only weakly to the intrinsic energy resolution of electrons. Such an unexpected large intrinsic energy resolution may come from fluctuations in energy transfer processes.
△ Less
Submitted 10 March, 2022;
originally announced March 2022.
-
Light-by-Light Scattering in a Photon-Photon Collider
Authors:
T. Takahashi,
G. An,
Y. Chen,
W. Chou,
Y. Huang,
W. Liu,
W. Lu,
J. Lv,
G. Pei,
S. Pei,
C. P. Shen,
B. Sun,
C. Zhang,
C. Zhang
Abstract:
We studied the feasibility of observing light-by-light scattering in a photon-photon collider based on an existing accelerator complex and a commercially available laser system. We investigated the statistical significance of the signal over the QED backgrounds through a Monte Carlo simulation with a detector model. The study showed that light-by-light scattering can be observed with a statistical…
▽ More
We studied the feasibility of observing light-by-light scattering in a photon-photon collider based on an existing accelerator complex and a commercially available laser system. We investigated the statistical significance of the signal over the QED backgrounds through a Monte Carlo simulation with a detector model. The study showed that light-by-light scattering can be observed with a statistical significance of 8 to 10 sigma in a year of operation, depending on the operating conditions.
△ Less
Submitted 18 October, 2018; v1 submitted 29 June, 2018;
originally announced July 2018.
-
The laboratory measurement of radioactivity purification for Pb212 in liquid scintillator
Authors:
Wei Hu,
Jian Fang,
Boxiang Yu,
Xuan Zhang,
Li Zhou,
Xiao Cai,
Lijun Sun,
Wanjin Liu,
Lan Wang,
Junguang Lv
Abstract:
The liquid scintillator (LS) has been widely utilized in the past, running and future neutrino experiments, and requirement to the LS radio-purity is higher and higher. The water extraction is a powerful method to remove soluble radioactive nuclei, and a mini-extraction station has been constructed. To evaluate the extraction efficiency and optimize the operation parameters, a setup to load radioa…
▽ More
The liquid scintillator (LS) has been widely utilized in the past, running and future neutrino experiments, and requirement to the LS radio-purity is higher and higher. The water extraction is a powerful method to remove soluble radioactive nuclei, and a mini-extraction station has been constructed. To evaluate the extraction efficiency and optimize the operation parameters, a setup to load radioactivity to LS and a laboratory scale setup to measure radioactivity which use Bi^{212}-Po^{212}-Pb^{208} cascade decay are developed. Experiences from laboratory study will be useful to large scale water extraction plants design and the optimization of working in future.
△ Less
Submitted 12 May, 2016; v1 submitted 12 January, 2016;
originally announced January 2016.
-
Simulation of background reduction and Compton depression in low-background HPGe spectrometer at a surface laboratory
Authors:
ShunLi Niu,
Xiao Cai,
ZhenZhong Wu,
YuGuang Xie,
BoXiang Yu,
ZhiGang Wang,
Jian Fang,
XiLei Sun,
LiJun Sun,
YingBiao Liu,
Long Gao,
Xuan Zhang,
Hang Zhao,
Li Zhou,
JunGuang Lv,
Tao Hu
Abstract:
High-purity germanium detectors are well suited to analysis the radioactivity of samples. In order to reduce the environmental background, low-activity lead and oxygen free copper are installed outside of the probe to shield gammas, outmost is a plastic scintillator to veto the cosmic rays, and an anti-Compton detector can improve the Peak-to-Compton ratio. Using the GEANT4 tools and taking into a…
▽ More
High-purity germanium detectors are well suited to analysis the radioactivity of samples. In order to reduce the environmental background, low-activity lead and oxygen free copper are installed outside of the probe to shield gammas, outmost is a plastic scintillator to veto the cosmic rays, and an anti-Compton detector can improve the Peak-to-Compton ratio. Using the GEANT4 tools and taking into account a detailed description of the detector, we optimize the sizes of the detectors to reach the design indexes. A group of experimental data from a HPGe spectrometer in using were used to compare with the simulation. As to new HPGe Detector simulation, considering the different thickness of BGO crystals and anti-coincidence efficiency, the simulation results show that the optimal thickness is 5.5cm, and the Peak-to-Compton ratio of 40K is raised to 1000 when the anti-coincidence efficiency is 0.85. As the background simulation, 15 cm oxygen-free copper plus 10 cm lead can reduce the environmental gamma rays to 0.0024 cps/100 cm3 Ge (50keV~2.8MeV), which is about 10-5 of environmental background.
△ Less
Submitted 16 October, 2014;
originally announced October 2014.
