-
A magnetic spectrometer to measure electron bunches accelerated at AWAKE
Authors:
J. Bauche,
B. Biskup,
M. Cascella,
J. Chappell,
N. Chritin,
D. Cooke,
L. Deacon,
Q. Deliege,
I. Gorgisyan,
J. Hansen,
S. Jolly,
F. Keeble,
P. La Penna,
S. Mazzoni,
D. Medina Godoy,
A. Petrenko,
M. Quattri,
T. Schneider,
P. Sherwood,
A. Vorozhtsov,
M. Wing
Abstract:
A magnetic spectrometer has been developed for the AWAKE experiment at CERN in order to measure the energy distribution of bunches of electrons accelerated in wakefields generated by proton bunches in plasma. AWAKE is a proof-of-principle experiment for proton-driven plasma wakefield acceleration, using proton bunches from the SPS. Electron bunches are accelerated to $\mathcal{O}$(1 GeV) in a rubi…
▽ More
A magnetic spectrometer has been developed for the AWAKE experiment at CERN in order to measure the energy distribution of bunches of electrons accelerated in wakefields generated by proton bunches in plasma. AWAKE is a proof-of-principle experiment for proton-driven plasma wakefield acceleration, using proton bunches from the SPS. Electron bunches are accelerated to $\mathcal{O}$(1 GeV) in a rubidium plasma cell and then separated from the proton bunches via a dipole magnet. The dipole magnet also induces an energy-dependent spatial horizontal spread on the electron bunch which then impacts on a scintillator screen. The scintillation photons emitted are transported via three highly-reflective mirrors to an intensified CCD camera, housed in a dark room, which passes the images to the CERN controls system for storage and further analysis. Given the known magnetic field and determination of the efficiencies of the system, the spatial spread of the scintillation photons can be converted to an electron energy distribution. A lamp attached on a rail in front of the scintillator is used to calibrate the optical system, with calibration of the scintillator screen's response to electrons carried out at the CLEAR facility at CERN. In this article, the design of the AWAKE spectrometer is presented, along with the calibrations carried out and expected performance such that the energy distribution of accelerated electrons can be measured.
△ Less
Submitted 15 February, 2019;
originally announced February 2019.
-
The Two-Screen Measurement Setup to Indirectly Measure Proton Beam Self-Modulation in AWAKE
Authors:
Marlene Turner,
B. Biskup,
S. Burger,
E. Gschwendtner,
S. Mazzoni,
A. Petrenko
Abstract:
The goal of the first phase of the AWAKE \cite{AWAKE1,AWAKE2} experiment at CERN is to measure the self-modulation \cite{SMI} of the $σ_z = 12\,\rm{cm}$ long SPS proton bunch into microbunches after traversing $10\,\rm{m}$ of plasma with a plasma density of $n_{pe}=7\times10^{14}\,\rm{electrons/cm}^3$. The two screen measurement setup \cite{Turner2016} is a proton beam diagnostic that can indirect…
▽ More
The goal of the first phase of the AWAKE \cite{AWAKE1,AWAKE2} experiment at CERN is to measure the self-modulation \cite{SMI} of the $σ_z = 12\,\rm{cm}$ long SPS proton bunch into microbunches after traversing $10\,\rm{m}$ of plasma with a plasma density of $n_{pe}=7\times10^{14}\,\rm{electrons/cm}^3$. The two screen measurement setup \cite{Turner2016} is a proton beam diagnostic that can indirectly prove the successful development of the self-modulation of the proton beam by imaging protons that got defocused by the transverse plasma wakefields after passing through the plasma, at two locations downstream the end of the plasma. This article describes the design and realization of the two screen measurement setup integrated in the AWAKE experiment. We discuss the performance and background response of the system based on measurements performed with an unmodulated Gaussian SPS proton bunch during the AWAKE beam commissioning in September and October 2016. We show that the system is fully commissioned and adapted to eventually image the full profile of a self-modulated SPS proton bunch in a single shot measurement during the first phase of the AWAKE experiment.
△ Less
Submitted 21 February, 2017;
originally announced February 2017.
-
The radiation field in the Gamma Irradiation Facility GIF++ at CERN
Authors:
Dorothea Pfeiffer,
Georgi Gorine,
Hans Reithler,
Bartolomej Biskup,
Alasdair Day,
Adrian Fabich,
Joffrey Germa,
Roberto Guida,
Martin Jaekel,
Federico Ravotti
Abstract:
The high-luminosity LHC (HL-LHC) upgrade is setting now a new challenge for particle detector technologies. The increase in luminosity will produce a particle background in the gas-based muon detectors that is ten times higher than under conditions at the LHC. The detailed knowledge of the detector performance in the presence of such a high background is crucial for an optimized design and efficie…
▽ More
The high-luminosity LHC (HL-LHC) upgrade is setting now a new challenge for particle detector technologies. The increase in luminosity will produce a particle background in the gas-based muon detectors that is ten times higher than under conditions at the LHC. The detailed knowledge of the detector performance in the presence of such a high background is crucial for an optimized design and efficient operation after the HL-LHC upgrade. A precise understanding of possible aging effects of detector materials and gases is of extreme importance. To cope with these challenging requirements, a new Gamma Irradiation Facility (GIF++) was designed and built at the CERN SPS North Area as successor of the Gamma Irradiation Facility (GIF) during the Long Shutdown 1 (LS1) period. It features an intense source of 662 keV photons with adjustable intensity, to simulate continuous background over large areas, and, combined with a high energy muon beam, to measure detector performance in the presence of the background. The new GIF++ facility has been operational since spring 2015. In addition to describing the facility and its infrastructure, the goal of this work is to provide an extensive characterization of the GIF++ photon field with different configurations of the absorption filters in both the upstream and downstream irradiation areas. Moreover, the measured results are benchmarked with Geant4 simulations to enhance the knowledge of the radiation field. The absorbed dose in air in the facility may reach up to 2.2 Gy/h directly in front of the irradiator. Of special interest is the low-energy photon component that develops due to the multiple scattering of photons within the irradiator and from the concrete walls of the bunker.
△ Less
Submitted 8 June, 2017; v1 submitted 1 November, 2016;
originally announced November 2016.
-
The LBNO long-baseline oscillation sensitivities with two conventional neutrino beams at different baselines
Authors:
LAGUNA-LBNO Collaboration,
:,
S. K. Agarwalla,
L. Agostino,
M. Aittola,
A. Alekou,
B. Andrieu,
F. Antoniou,
R. Asfandiyarov,
D. Autiero,
O. Bésida,
A. Balik,
P. Ballett,
I. Bandac,
D. Banerjee,
W. Bartmann,
F. Bay,
B. Biskup,
A. M. Blebea-Apostu,
A. Blondel,
M. Bogomilov,
S. Bolognesi,
E. Borriello,
I. Brancus,
A. Bravar
, et al. (136 additional authors not shown)
Abstract:
The proposed Long Baseline Neutrino Observatory (LBNO) initially consists of $\sim 20$ kton liquid double phase TPC complemented by a magnetised iron calorimeter, to be installed at the Pyhäsalmi mine, at a distance of 2300 km from CERN. The conventional neutrino beam is produced by 400 GeV protons accelerated at the SPS accelerator delivering 700 kW of power. The long baseline provides a unique o…
▽ More
The proposed Long Baseline Neutrino Observatory (LBNO) initially consists of $\sim 20$ kton liquid double phase TPC complemented by a magnetised iron calorimeter, to be installed at the Pyhäsalmi mine, at a distance of 2300 km from CERN. The conventional neutrino beam is produced by 400 GeV protons accelerated at the SPS accelerator delivering 700 kW of power. The long baseline provides a unique opportunity to study neutrino flavour oscillations over their 1st and 2nd oscillation maxima exploring the $L/E$ behaviour, and distinguishing effects arising from $δ_{CP}$ and matter. In this paper we show how this comprehensive physics case can be further enhanced and complemented if a neutrino beam produced at the Protvino IHEP accelerator complex, at a distance of 1160 km, and with modest power of 450 kW is aimed towards the same far detectors. We show that the coupling of two independent sub-MW conventional neutrino and antineutrino beams at different baselines from CERN and Protvino will allow to measure CP violation in the leptonic sector at a confidence level of at least $3σ$ for 50\% of the true values of $δ_{CP}$ with a 20 kton detector. With a far detector of 70 kton, the combination allows a $3σ$ sensitivity for 75\% of the true values of $δ_{CP}$ after 10 years of running. Running two independent neutrino beams, each at a power below 1 MW, is more within today's state of the art than the long-term operation of a new single high-energy multi-MW facility, which has several technical challenges and will likely require a learning curve.
△ Less
Submitted 2 December, 2014;
originally announced December 2014.
-
Optimised sensitivity to leptonic CP violation from spectral information: the LBNO case at 2300 km baseline
Authors:
LAGUNA-LBNO Collaboration,
:,
S. K. Agarwalla,
L. Agostino,
M. Aittola,
A. Alekou,
B. Andrieu,
F. Antoniou,
R. Asfandiyarov,
D. Autiero,
O. Bésida,
A. Balik,
P. Ballett,
I. Bandac,
D. Banerjee,
W. Bartmann,
F. Bay,
B. Biskup,
A. M. Blebea-Apostu,
A. Blondel,
M. Bogomilov,
S. Bolognesi,
E. Borriello,
I. Brancus,
A. Bravar
, et al. (136 additional authors not shown)
Abstract:
One of the main goals of the Long Baseline Neutrino Observatory (LBNO) is to study the $L/E$ behaviour (spectral information) of the electron neutrino and antineutrino appearance probabilities, in order to determine the unknown CP-violation phase $δ_{CP}$ and discover CP-violation in the leptonic sector. The result is based on the measurement of the appearance probabilities in a broad range of ene…
▽ More
One of the main goals of the Long Baseline Neutrino Observatory (LBNO) is to study the $L/E$ behaviour (spectral information) of the electron neutrino and antineutrino appearance probabilities, in order to determine the unknown CP-violation phase $δ_{CP}$ and discover CP-violation in the leptonic sector. The result is based on the measurement of the appearance probabilities in a broad range of energies, covering t he 1st and 2nd oscillation maxima, at a very long baseline of 2300 km. The sensitivity of the experiment can be maximised by optimising the energy spectra of the neutrino and anti-neutrino fluxes. Such an optimisation requires exploring an extended range of parameters describing in details the geometries and properties of the primary protons, hadron target and focusing elements in the neutrino beam line. In this paper we present a numerical solution that leads to an optimised energy spectra and study its impact on the sensitivity of LBNO to discover leptonic CP violation. In the optimised flux both 1st and 2nd oscillation maxima play an important role in the CP sensitivity. The studies also show that this configuration is less sensitive to systematic errors (e.g. on the total event rates) than an experiment which mainly relies on the neutrino-antineutrino asymmetry at the 1st maximum to determine the existence of CP-violation.
△ Less
Submitted 1 December, 2014;
originally announced December 2014.
