-
Cellular Wireless Networks in the Upper Mid-Band
Authors:
Seongjoon Kang,
Marco Mezzavilla,
Sundeep Rangan,
Arjuna Madanayake,
Satheesh Bojja Venkatakrishnan,
Gregory Hellbourg,
Monisha Ghosh,
Hamed Rahmani,
Aditya Dhananjay
Abstract:
The upper mid-band - roughly from 7 to 24 GHz - has attracted considerable recent interest for new cellular services. This frequency range has vastly more spectrum than the highly congested bands below 7 GHz while offering more favorable propagation and coverage than the millimeter wave (mmWave) frequencies. The upper mid-band can thus provide a powerful and complementary frequency range to balanc…
▽ More
The upper mid-band - roughly from 7 to 24 GHz - has attracted considerable recent interest for new cellular services. This frequency range has vastly more spectrum than the highly congested bands below 7 GHz while offering more favorable propagation and coverage than the millimeter wave (mmWave) frequencies. The upper mid-band can thus provide a powerful and complementary frequency range to balance coverage and capacity. Realizing the full potential of these bands, however, will require fundamental changes to the design of cellular systems. Most importantly, spectrum will likely need to be shared with incumbents including communication satellites, military RADAR, and radio astronomy. Also, the upper mid-band is simply a vast frequency range. Due to this wide bandwidth, combined with the directional nature of transmission and intermittent occupancy of incumbents, cellular systems will need to be agile to sense and intelligently use large spatial and frequency degrees of freedom. This paper attempts to provide an initial assessment of the feasibility and potential gains of wideband cellular systems operating in the upper mid-band. The study includes: (1) a system study to assess potential gains of multi-band systems in a representative dense urban environment and illustrate the value of wide band system with dynamic frequency selectivity; (2) an evaluation of potential cross interference between satellites and terrestrial cellular services and interference nulling to reduce that interference; and (3) design and evaluation of a compact multi-band antenna array structure. Leveraging these preliminary results, we identify potential future research directions to realize next-generation systems in these frequencies.
△ Less
Submitted 6 March, 2024; v1 submitted 6 September, 2023;
originally announced September 2023.
-
Xilinx RF-SoC-based Digital Multi-Beam Array Processors for 28/60~GHz Wireless Testbeds
Authors:
Sravan Pulipati,
Viduneth Ariyarathna,
Aditya Dhananjay,
Mohammed E. Eltayeb,
Marco Mezzavilla,
Josep M. Jornet,
Soumyajit Mandal,
Shubhendu Bhardwaj,
Arjuna Madanayake
Abstract:
Emerging wireless applications such as 5G cellular, large intelligent surfaces (LIS), and holographic massive MIMO require antenna array processing at mm-wave frequencies with large numbers of independent digital transceivers. This paper summarizes the authors' recent progress on the design and testing of 28 GHz and 60 GHz fully-digital array processing platforms based on wideband reconfigurable F…
▽ More
Emerging wireless applications such as 5G cellular, large intelligent surfaces (LIS), and holographic massive MIMO require antenna array processing at mm-wave frequencies with large numbers of independent digital transceivers. This paper summarizes the authors' recent progress on the design and testing of 28 GHz and 60 GHz fully-digital array processing platforms based on wideband reconfigurable FPGA-based software-defined radios (SDRs). The digital baseband and microwave interfacing aspects of the SDRs are implemented on single-chip RF system-on-chip (RF-SoC) processors from Xilinx. Two versions of the RF-SoC technology (ZCU-111 and ZCU-1275) were used to implement fully-digital real-time array processors at 28~GHz (realizing 4 parallel beams with 0.8 GHz bandwidth per beam) and 60~GHz (realizing 4 parallel beams with 1.8~GHz bandwidth per beam). Dielectric lenslet arrays fed by a digital phased-array feed (PAF) located on the focal plane are proposed for further increasing antenna array gain.
△ Less
Submitted 3 August, 2020;
originally announced August 2020.
-
60 GHz Blockage Study Using Phased Arrays
Authors:
Christopher Slezak,
Aditya Dhananjay,
Sundeep Rangan
Abstract:
The millimeter wave (mmWave) frequencies offer the potential for enormous capacity wireless links. However, designing robust communication systems at these frequencies requires that we understand the channel dynamics over both time and space: mmWave signals are extremely vulnerable to blocking and the channel can thus rapidly appear and disappear with small movement of obstacles and reflectors. In…
▽ More
The millimeter wave (mmWave) frequencies offer the potential for enormous capacity wireless links. However, designing robust communication systems at these frequencies requires that we understand the channel dynamics over both time and space: mmWave signals are extremely vulnerable to blocking and the channel can thus rapidly appear and disappear with small movement of obstacles and reflectors. In rich scattering environments, different paths may experience different blocking trajectories and understanding these multi-path blocking dynamics is essential for developing and assessing beamforming and beam-tracking algorithms. This paper presents the design and experimental results of a novel measurement system which uses phased arrays to perform mmWave dynamic channel measurements. Specifically, human blockage and its effects across multiple paths are investigated with only several microseconds between successive measurements. From these measurements we develop a modeling technique which uses low-rank tensor factorization to separate the available paths so that their joint statistics can be understood.
△ Less
Submitted 14 December, 2017;
originally announced December 2017.