Showing 1–50 of 50 results for author: Sakurai, Y

LiteBIRD Science Goals and Forecasts. Mapping the Hot Gas in the Universe

Authors: M. Remazeilles, M. Douspis, J. A. Rubiño-Martín, A. J. Banday, J. Chluba, P. de Bernardis, M. De Petris, C. Hernández-Monteagudo, G. Luzzi, J. Macias-Perez, S. Masi, T. Namikawa, L. Salvati, H. Tanimura, K. Aizawa, A. Anand, J. Aumont, C. Baccigalupi, M. Ballardini, R. B. Barreiro, N. Bartolo, S. Basak, M. Bersanelli, D. Blinov, M. Bortolami , et al. (81 additional authors not shown)

Abstract: We assess the capabilities of the LiteBIRD mission to map the hot gas distribution in the Universe through the thermal Sunyaev-Zeldovich (SZ) effect. Our analysis relies on comprehensive simulations incorporating various sources of Galactic and extragalactic foreground emission, while accounting for specific instrumental characteristics of LiteBIRD, such as detector sensitivities, frequency-depend… ▽ More We assess the capabilities of the LiteBIRD mission to map the hot gas distribution in the Universe through the thermal Sunyaev-Zeldovich (SZ) effect. Our analysis relies on comprehensive simulations incorporating various sources of Galactic and extragalactic foreground emission, while accounting for specific instrumental characteristics of LiteBIRD, such as detector sensitivities, frequency-dependent beam convolution, inhomogeneous sky scanning, and $1/f$ noise. We implement a tailored component-separation pipeline to map the thermal SZ Compton $y$-parameter over 98% of the sky. Despite lower angular resolution for galaxy cluster science, LiteBIRD provides full-sky coverage and, compared to the Planck satellite, enhanced sensitivity, as well as more frequency bands to enable the construction of an all-sky $y$-map, with reduced foreground contamination at large and intermediate angular scales. By combining LiteBIRD and Planck channels in the component-separation pipeline, we obtain an optimal $y$-map that leverages the advantages of both experiments, with the higher angular resolution of the Planck channels enabling the recovery of compact clusters beyond the LiteBIRD beam limitations, and the numerous sensitive LiteBIRD channels further mitigating foregrounds. The added value of LiteBIRD is highlighted through the examination of maps, power spectra, and one-point statistics of the various sky components. After component separation, the $1/f$ noise from LiteBIRD is effectively mitigated below the thermal SZ signal at all multipoles. Cosmological constraints on $S_8=σ_8\left(Ω_{\rm m}/0.3\right)^{0.5}$ obtained from the LiteBIRD-Planck combined $y$-map power spectrum exhibits a 15% reduction in uncertainty compared to constraints from Planck alone. This improvement can be attributed to the increased portion of uncontaminated sky available in the LiteBIRD-Planck combined $y$-map. △ Less

Submitted 24 July, 2024; originally announced July 2024.

Comments: 38 pages, 13 figures, abstract shortened, submitted to JCAP

The LiteBIRD mission to explore cosmic inflation

Authors: T. Ghigna, A. Adler, K. Aizawa, H. Akamatsu, R. Akizawa, E. Allys, A. Anand, J. Aumont, J. Austermann, S. Azzoni, C. Baccigalupi, M. Ballardini, A. J. Banday, R. B. Barreiro, N. Bartolo, S. Basak, A. Basyrov, S. Beckman, M. Bersanelli, M. Bortolami, F. Bouchet, T. Brinckmann, P. Campeti, E. Carinos, A. Carones , et al. (134 additional authors not shown)

Abstract: LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-… ▽ More LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-year mission, LiteBIRD will employ three telescopes within 15 unique frequency bands (ranging from 34 through 448 GHz), targeting a sensitivity of 2.2\,$μ$K-arcmin and a resolution of 0.5$^\circ$ at 100\,GHz. Its primary goal is to measure the tensor-to-scalar ratio $r$ with an uncertainty $δr = 0.001$, including systematic errors and margin. If $r \geq 0.01$, LiteBIRD expects to achieve a $>5σ$ detection in the $\ell=$2-10 and $\ell=$11-200 ranges separately, providing crucial insight into the early Universe. We describe LiteBIRD's scientific objectives, the application of systems engineering to mission requirements, the anticipated scientific impact, and the operations and scanning strategies vital to minimizing systematic effects. We will also highlight LiteBIRD's synergies with concurrent CMB projects. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Comments: 23 pages, 9 figures, 1 table, SPIE Astronomical Telescopes + Instrumentation 2024

The Simons Observatory: Design, integration, and testing of the small aperture telescopes

Authors: Nicholas Galitzki, Tran Tsan, Jake Spisak, Michael Randall, Max Silva-Feaver, Joseph Seibert, Jacob Lashner, Shunsuke Adachi, Sean M. Adkins, Thomas Alford, Kam Arnold, Peter C. Ashton, Jason E. Austermann, Carlo Baccigalupi, Andrew Bazarko, James A. Beall, Sanah Bhimani, Bryce Bixler, Gabriele Coppi, Lance Corbett, Kevin D. Crowley, Kevin T. Crowley, Samuel Day-Weiss, Simon Dicker, Peter N. Dow , et al. (55 additional authors not shown)

Abstract: The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $σ(r)=0.002$, with quantified systematic errors well below this value. Each SAT… ▽ More The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $σ(r)=0.002$, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35$^\circ$ field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and $<0.1$ K focal plane that holds $>12,000$ TES detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz. △ Less

Submitted 10 May, 2024; v1 submitted 9 May, 2024; originally announced May 2024.

LiteBIRD Science Goals and Forecasts: Primordial Magnetic Fields

Authors: D. Paoletti, J. Rubino-Martin, M. Shiraishi, D. Molinari, J. Chluba, F. Finelli, C. Baccigalupi, J. Errard, A. Gruppuso, A. I. Lonappan, A. Tartari, E. Allys, A. Anand, J. Aumont, M. Ballardini, A. J. Banday, R. B. Barreiro, N. Bartolo, M. Bersanelli, M. Bortolami, T. Brinckmann, E. Calabrese, P. Campeti, A. Carones, F. J. Casas , et al. (75 additional authors not shown)

Abstract: We present detailed forecasts for the constraints on primordial magnetic fields (PMFs) that will be obtained with the LiteBIRD satellite. The constraints are driven by the effects of PMFs on the CMB anisotropies: the gravitational effects of magnetically-induced perturbations; the effects on the thermal and ionization history of the Universe; the Faraday rotation imprint on the CMB polarization; a… ▽ More We present detailed forecasts for the constraints on primordial magnetic fields (PMFs) that will be obtained with the LiteBIRD satellite. The constraints are driven by the effects of PMFs on the CMB anisotropies: the gravitational effects of magnetically-induced perturbations; the effects on the thermal and ionization history of the Universe; the Faraday rotation imprint on the CMB polarization; and the non-Gaussianities induced in polarization anisotropies. LiteBIRD represents a sensitive probe for PMFs and by exploiting all the physical effects, it will be able to improve the current limit coming from Planck. In particular, thanks to its accurate $B$-mode polarization measurement, LiteBIRD will improve the constraints on infrared configurations for the gravitational effect, giving $B_{\rm 1\,Mpc}^{n_{\rm B} =-2.9} < 0.8$ nG at 95% C.L., potentially opening the possibility to detect nanogauss fields with high significance. We also observe a significant improvement in the limits when marginalized over the spectral index, $B_{1\,{\rm Mpc}}^{\rm marg}< 2.2$ nG at 95% C.L. From the thermal history effect, which relies mainly on $E$-mode polarization data, we obtain a significant improvement for all PMF configurations, with the marginalized case, $\sqrt{\langle B^2\rangle}^{\rm marg}<0.50$ nG at 95% C.L. Faraday rotation constraints will take advantage of the wide frequency coverage of LiteBIRD and the high sensitivity in $B$ modes, improving the limits by orders of magnitude with respect to current results, $B_{1\,{\rm Mpc}}^{n_{\rm B} =-2.9} < 3.2$ nG at 95% C.L. Finally, non-Gaussianities of the $B$-mode polarization can probe PMFs at the level of 1 nG, again significantly improving the current bounds from Planck. Altogether our forecasts represent a broad collection of complementary probes, providing conservative limits on PMF characteristics that will be achieved with LiteBIRD. △ Less

Submitted 25 March, 2024; originally announced March 2024.

Comments: 51 pages, 24 figures, abstract shortened

The Simons Observatory: Development and Optical Evaluation of Achromatic Half-Wave Plates

Authors: Junna Sugiyama, Tomoki Terasaki, Kana Sakaguri, Bryce Bixler, Yuki Sakurai, Kam Arnold, Kevin T. Crowley, Rahul Datta, Nicholas Galitzki, Masaya Hasegawa, Bradley R. Johnson, Brian Keating, Akito Kusaka, Adrian Lee, Tomotake Matsumura, Jeffrey Mcmahon, Maximiliano Silva-Feaver, Yuhan Wang, Kyohei Yamada

Abstract: The Simons Observatory (SO) experiment is a cosmic microwave background (CMB) experiment located in the Atacama Desert, Chile. The SO' s small aperture telescopes (SATs) consist of three telescopes designed for precise CMB polarimetry at large angular scales. Each SAT uses a cryogenic rotating half-wave plate (HWP) as a polarization modulator to mitigate atmospheric 1/f noise and other systematics… ▽ More The Simons Observatory (SO) experiment is a cosmic microwave background (CMB) experiment located in the Atacama Desert, Chile. The SO' s small aperture telescopes (SATs) consist of three telescopes designed for precise CMB polarimetry at large angular scales. Each SAT uses a cryogenic rotating half-wave plate (HWP) as a polarization modulator to mitigate atmospheric 1/f noise and other systematics. To realize efficient polarization modulation over the observation bands, we fabricated an achromatic HWP (AHWP) consisting of three sapphire plates with anti-reflection coatings. The AHWP is designed to have broadband modulation efficiency and transmittance. This paper reports on the design and the preliminary characterization of the AHWPs for SATs. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Journal ref: J Low Temp Phys (2024)

Anti-reflection coating with mullite and Duroid for large-diameter cryogenic sapphire and alumina optics

Authors: Kana Sakaguri, Masaya Hasegawa, Yuki Sakurai, Junna Sugiyama, Nicole Farias, Charles Hill, Bradley R. Johnson, Kuniaki Konishi, Akito Kusaka, Adrian T. Lee, Tomotake Matsumura, Edward J. Wollack, Junji Yumoto

Abstract: We developed a broadband two-layer anti-reflection (AR) coating for use on a sapphire half-wave plate (HWP) and an alumina infrared (IR) filter for the cosmic microwave background (CMB) polarimetry. Measuring the faint CMB B-mode signals requires maximizing the number of photons reaching the detectors and minimizing spurious polarization due to reflection with an off-axis incident angle. Sapphire… ▽ More We developed a broadband two-layer anti-reflection (AR) coating for use on a sapphire half-wave plate (HWP) and an alumina infrared (IR) filter for the cosmic microwave background (CMB) polarimetry. Measuring the faint CMB B-mode signals requires maximizing the number of photons reaching the detectors and minimizing spurious polarization due to reflection with an off-axis incident angle. Sapphire and alumina have high refractive indices of 3.1 and are highly reflective without an AR coating. This paper presents the design, fabrication, quality control, and measured performance of an AR coating using thermally-sprayed mullite and Duroid 5880LZ. This technology enables large optical elements with diameters of 600 mm. We also present a newly developed thermography-based nondestructive quality control technique, which is key to assuring good adhesion and preventing delamination when thermal cycling. We demonstrate the average reflectance of about 2.6% (0.9%) for two observing bands centered at 90/150 (220/280) GHz. At room temperature, the average transmittance of a 105 mm square test sample at 220/280 GHz is 83%, and it will increase to 90% at 100 K, attributed to reduced absorption losses. Therefore, our developed layering technique has proved effective for 220/280 GHz applications, particularly in addressing dielectric loss concerns. This AR coating technology has been deployed in the cryogenic HWP and IR filters of the Simons Array and the Simons observatory experiments and applies to future experiments such as CMB-S4. △ Less

Submitted 19 December, 2023; originally announced December 2023.

Journal ref: Applied Optics Vol. 63, Issue 6, pp. 1618-1627 (2024)

Impact of beam far side-lobe knowledge in the presence of foregrounds for LiteBIRD

Authors: C. Leloup, G. Patanchon, J. Errard, C. Franceschet, J. E. Gudmundsson, S. Henrot-Versillé, H. Imada, H. Ishino, T. Matsumura, G. Puglisi, W. Wang, A. Adler, J. Aumont, R. Aurlien, C. Baccigalupi, M. Ballardini, A. J. Banday, R. B. Barreiro, N. Bartolo, A. Basyrov, M. Bersanelli, D. Blinov, M. Bortolami, T. Brinckmann, P. Campeti , et al. (86 additional authors not shown)

Abstract: We present a study of the impact of an uncertainty in the beam far side-lobe knowledge on the measurement of the Cosmic Microwave Background $B$-mode signal at large scale. It is expected to be one of the main source of systematic effects in future CMB observations. Because it is crucial for all-sky survey missions to take into account the interplays between beam systematic effects and all the dat… ▽ More We present a study of the impact of an uncertainty in the beam far side-lobe knowledge on the measurement of the Cosmic Microwave Background $B$-mode signal at large scale. It is expected to be one of the main source of systematic effects in future CMB observations. Because it is crucial for all-sky survey missions to take into account the interplays between beam systematic effects and all the data analysis steps, the primary goal of this paper is to provide the methodology to carry out the end-to-end study of their effect for a space-borne CMB polarization experiment, up to the cosmological results in the form of a bias $δr$ on the tensor-to-scalar ratio $r$. LiteBIRD is dedicated to target the measurement of CMB primordial $B$ modes by reaching a sensitivity of $σ\left( r \right) \leq 10^{-3}$ assuming $r=0$. As a demonstration of our framework, we derive the relationship between the knowledge of the beam far side-lobes and the tentatively allocated error budget under given assumptions on design, simulation and component separation method. We assume no mitigation of the far side-lobes effect at any stage of the analysis pipeline. We show that $δr$ is mostly due to the integrated fractional power difference between the estimated beams and the true beams in the far side-lobes region, with little dependence on the actual shape of the beams, for low enough $δr$. Under our set of assumptions, in particular considering the specific foreground cleaning method we used, we find that the integrated fractional power in the far side-lobes should be known at a level as tight as $\sim 10^{-4}$, to achieve the required limit on the bias $δr < 1.9 \times 10^{-5}$. The framework and tools developed for this study can be easily adapted to provide requirements under different design, data analysis frameworks and for other future space-borne experiments beyond LiteBIRD. △ Less

Submitted 14 December, 2023; originally announced December 2023.

Axion Cloud Decay due to the Axion-photon Conversion with Multi-pole Background Magnetic Fields

Authors: Yusuke Sakurai, Chul-Moon Yoo, Atsushi Naruko, Daisuke Yamauchi

Abstract: We consider axion cloud decay due to the axion-photon conversion with multi-pole background magnetic fields. We focus on the $\ell=m=1$ and $n=2$ mode for the axion field configuration since it has the largest growth rate associated with superradiant instability. Under the existence of a background multi-pole magnetic field, the axion field can be converted into the electromagnetic field through t… ▽ More We consider axion cloud decay due to the axion-photon conversion with multi-pole background magnetic fields. We focus on the $\ell=m=1$ and $n=2$ mode for the axion field configuration since it has the largest growth rate associated with superradiant instability. Under the existence of a background multi-pole magnetic field, the axion field can be converted into the electromagnetic field through the axion-photon coupling. Then the decay rate due to the dissipation of the converted photons is calculated in a successive approximation. We found that the decay rate is significantly dependent on the azimuthal quantum number characterizing the background magnetic field, and can be comparable to or larger than the growth rate of the superradiant instability. △ Less

Submitted 20 December, 2023; v1 submitted 12 December, 2023; originally announced December 2023.

Comments: 13 pages, 1 figure. arXiv admin note: substantial text overlap with arXiv:2103.13227

Report number: YITP-23-157

LiteBIRD Science Goals and Forecasts: Improving Sensitivity to Inflationary Gravitational Waves with Multitracer Delensing

Authors: T. Namikawa, A. I. Lonappan, C. Baccigalupi, N. Bartolo, D. Beck, K. Benabed, A. Challinor, P. Diego-Palazuelos, J. Errard, S. Farrens, A. Gruppuso, N. Krachmalnicoff, M. Migliaccio, E. Martínez-González, V. Pettorino, G. Piccirilli, M. Ruiz-Granda, B. Sherwin, J. Starck, P. Vielva, R. Akizawa, A. Anand, J. Aumont, R. Aurlien, S. Azzoni , et al. (97 additional authors not shown)

Abstract: We estimate the efficiency of mitigating the lensing $B$-mode polarization, the so-called delensing, for the $LiteBIRD$ experiment with multiple external data sets of lensing-mass tracers. The current best bound on the tensor-to-scalar ratio, $r$, is limited by lensing rather than Galactic foregrounds. Delensing will be a critical step to improve sensitivity to $r$ as measurements of $r$ become mo… ▽ More We estimate the efficiency of mitigating the lensing $B$-mode polarization, the so-called delensing, for the $LiteBIRD$ experiment with multiple external data sets of lensing-mass tracers. The current best bound on the tensor-to-scalar ratio, $r$, is limited by lensing rather than Galactic foregrounds. Delensing will be a critical step to improve sensitivity to $r$ as measurements of $r$ become more and more limited by lensing. In this paper, we extend the analysis of the recent $LiteBIRD$ forecast paper to include multiple mass tracers, i.e., the CMB lensing maps from $LiteBIRD$ and CMB-S4-like experiment, cosmic infrared background, and galaxy number density from $Euclid$- and LSST-like survey. We find that multi-tracer delensing will further improve the constraint on $r$ by about $20\%$. In $LiteBIRD$, the residual Galactic foregrounds also significantly contribute to uncertainties of the $B$-modes, and delensing becomes more important if the residual foregrounds are further reduced by an improved component separation method. △ Less

Submitted 8 December, 2023; originally announced December 2023.

Comments: 21 pages, 7 figures

LiteBIRD Science Goals and Forecasts: A full-sky measurement of gravitational lensing of the CMB

Authors: A. I. Lonappan, T. Namikawa, G. Piccirilli, P. Diego-Palazuelos, M. Ruiz-Granda, M. Migliaccio, C. Baccigalupi, N. Bartolo, D. Beck, K. Benabed, A. Challinor, J. Errard, S. Farrens, A. Gruppuso, N. Krachmalnicoff, E. Martínez-González, V. Pettorino, B. Sherwin, J. Starck, P. Vielva, R. Akizawa, A. Anand, J. Aumont, R. Aurlien, S. Azzoni , et al. (97 additional authors not shown)

Abstract: We explore the capability of measuring lensing signals in $LiteBIRD$ full-sky polarization maps. With a $30$ arcmin beam width and an impressively low polarization noise of $2.16\,μ$K-arcmin, $LiteBIRD$ will be able to measure the full-sky polarization of the cosmic microwave background (CMB) very precisely. This unique sensitivity also enables the reconstruction of a nearly full-sky lensing map u… ▽ More We explore the capability of measuring lensing signals in $LiteBIRD$ full-sky polarization maps. With a $30$ arcmin beam width and an impressively low polarization noise of $2.16\,μ$K-arcmin, $LiteBIRD$ will be able to measure the full-sky polarization of the cosmic microwave background (CMB) very precisely. This unique sensitivity also enables the reconstruction of a nearly full-sky lensing map using only polarization data, even considering its limited capability to capture small-scale CMB anisotropies. In this paper, we investigate the ability to construct a full-sky lensing measurement in the presence of Galactic foregrounds, finding that several possible biases from Galactic foregrounds should be negligible after component separation by harmonic-space internal linear combination. We find that the signal-to-noise ratio of the lensing is approximately $40$ using only polarization data measured over $90\%$ of the sky. This achievement is comparable to $Planck$'s recent lensing measurement with both temperature and polarization and represents a four-fold improvement over $Planck$'s polarization-only lensing measurement. The $LiteBIRD$ lensing map will complement the $Planck$ lensing map and provide several opportunities for cross-correlation science, especially in the northern hemisphere. △ Less

Submitted 8 December, 2023; originally announced December 2023.

The Simons Observatory: Cryogenic Half Wave Plate Rotation Mechanism for the Small Aperture Telescopes

Authors: K. Yamada, B. Bixler, Y. Sakurai, P. C. Ashton, J. Sugiyama, K. Arnold, J. Begin, L. Corbett, S. Day-Weiss, N. Galitzki, C. A. Hill, B. R. Johnson, B. Jost, A. Kusaka, B. J. Koopman, J. Lashner, A. T. Lee, A. Mangu, H. Nishino, L. A. Page, M. J. Randall, D. Sasaki, X. Song, J. Spisak, T. Tsan , et al. (2 additional authors not shown)

Abstract: We present the requirements, design and evaluation of the cryogenic continuously rotating half-wave plate (CHWP) for the Simons Observatory (SO). SO is a cosmic microwave background (CMB) polarization experiment at Parque Astronómico Atacama in northern Chile that covers a wide range of angular scales using both small (0.42 m) and large (6 m) aperture telescopes. In particular, the small aperture… ▽ More We present the requirements, design and evaluation of the cryogenic continuously rotating half-wave plate (CHWP) for the Simons Observatory (SO). SO is a cosmic microwave background (CMB) polarization experiment at Parque Astronómico Atacama in northern Chile that covers a wide range of angular scales using both small (0.42 m) and large (6 m) aperture telescopes. In particular, the small aperture telescopes (SATs) focus on large angular scales for primordial B-mode polarization. To this end, the SATs employ a CHWP to modulate the polarization of the incident light at 8~Hz, suppressing atmospheric $1/f$ noise and mitigating systematic uncertainties that would otherwise arise due to the differential response of detectors sensitive to orthogonal polarizations. The CHWP consists of a 505 mm diameter achromatic sapphire HWP and a cryogenic rotation mechanism, both of which are cooled down to $\sim$50 K to reduce detector thermal loading. Under normal operation the HWP is suspended by a superconducting magnetic bearing and rotates with a constant 2 Hz frequency, controlled by an electromagnetic synchronous motor. The rotation angle is detected through an angular encoder with a noise level of 0.07$μ\mathrm{rad}\sqrt{\mathrm{s}}$. During a cooldown, the rotor is held in place by a grip-and-release mechanism that serves as both an alignment device and a thermal path. In this paper we provide an overview of the SO SAT CHWP: its requirements, hardware design, and laboratory performance. △ Less

Submitted 26 September, 2023; originally announced September 2023.

Comments: 19 pages, 21 figures, submitted to RSI

Journal ref: Rev. Sci. Instrum. 95, 024504 (2024)

Vibration characteristics of a continuously rotating superconducting magnetic bearing and potential influence to TES and SQUID

Authors: Shinya Sugiyama, Tommaso Ghigna, Yurika Hoshino, Nobuhiko Katayama, Satoru Katsuda, Kunimoto Komatsu, Tomotake Matsumura, Yuki Sakurai, Kosuke Sato, Ryota Takaku, Makoto Tashiro, Yukikatsu Terada

Abstract: We measured the vibration of a prototype superconducting magnetic bearing (SMB) operating at liquid nitrogen temperature. This prototype system was designed as a breadboard model for LiteBIRD low-frequency telescope (LFT) polarization modulator unit. We set an upper limit of the vibration amplitude at $36~\mathrm{μm}$ at the rotational synchronous frequency. During the rotation, the amplitude of t… ▽ More We measured the vibration of a prototype superconducting magnetic bearing (SMB) operating at liquid nitrogen temperature. This prototype system was designed as a breadboard model for LiteBIRD low-frequency telescope (LFT) polarization modulator unit. We set an upper limit of the vibration amplitude at $36~\mathrm{μm}$ at the rotational synchronous frequency. During the rotation, the amplitude of the magnetic field produced varies. From this setup, we compute the static and AC amplitude of the magnetic fields produced by the SMB magnet at the location of the LFT focal plane as $0.24~\mathrm{G}$ and $3\times10^{-5}$$~\mathrm{G}$, respectively. From the AC amplitude, we compute TES critical temperature variation of $7\times10^{-8}$$~\mathrm{K}$ and fractional change of the SQUID flux is $δΦ/Φ_0|_{ac}=3.1\times10^{-5}$. The mechanical vibration can be also estimated to be $3.6\times 10^{-2}$$~\mathrm{N}$ at the rotation mechanism location. △ Less

Submitted 21 October, 2022; originally announced October 2022.

Comments: 7 pages, 5 figures, accepted for publication in Journal of Low Temperature Physics

Journal ref: Journal of Low Temperature Physics (2022): 1-9

Broadband multi-layer anti-reflection coatings with mullite and duroid for half-wave plates and alumina filters for CMB polarimetry

Authors: Kana Sakaguri, Masaya Hasegawa, Yuki Sakurai, Charles Hill, Akito Kusaka

Abstract: A broadband two-layer anti-reflection (AR) coating was developed for use on a sapphire half-wave plate (HWP) and an alumina infrared (IR) filter for cosmic microwave background (CMB) polarimetry. Measuring tiny CMB B-mode signals requires maximizing the number of photons reaching the detectors and minimizing spurious polarization due to reflection with an off-axis incident angle. However, a sapphi… ▽ More A broadband two-layer anti-reflection (AR) coating was developed for use on a sapphire half-wave plate (HWP) and an alumina infrared (IR) filter for cosmic microwave background (CMB) polarimetry. Measuring tiny CMB B-mode signals requires maximizing the number of photons reaching the detectors and minimizing spurious polarization due to reflection with an off-axis incident angle. However, a sapphire HWP and an alumina IR filter have high refractive indices of about 3.1, and an AR coating must be applied to them. Thermally sprayed mullite and Duroid 5880LZ were selected in terms of index and coefficient of thermal expansion for use at cryogenic temperatures. With these materials, the reflectivity was reduced to about 2% at 90/150 GHz and <1% at 220/280 GHz. The design, fabrication, and optical performance evaluation of the AR coatings are described. The coatings were used in a current ground-based CMB experiment called the Simons Array. They could also be applied to next-generation CMB experiments, such as the Simons Observatory. △ Less

Submitted 19 August, 2022; originally announced August 2022.

Comments: 7 pages, 4 figures

Journal ref: Journal of Low Temperature Physics 209, 1264-1271 (2022)

Testbed preparation of a small prototype polarization modulator for LiteBIRD low-frequency telescope

Authors: Thuong D. Hoang, Tomotake Matsumura, Ryota Takaku, Takashi Hasebe, Tommaso Ghigna, Nobuhiko Katayama, Yuki Sakurai, Kunimoto Komatsu, Teruhito Iida, Yurika Hoshino, Shinya Sugiyama, Hirokazu Ishino

Abstract: LiteBIRD is the Cosmic Microwave Background (CMB) radiation polarization satellite mission led by ISAS/JAXA. The main scientific goal is to search for primordial gravitational wave signals generated from the inflation epoch of the Universe. LiteBIRD telescopes employ polarization modulation units (PMU) using continuously rotating half-wave plates (HWP). The PMU is a crucial component to reach unpr… ▽ More LiteBIRD is the Cosmic Microwave Background (CMB) radiation polarization satellite mission led by ISAS/JAXA. The main scientific goal is to search for primordial gravitational wave signals generated from the inflation epoch of the Universe. LiteBIRD telescopes employ polarization modulation units (PMU) using continuously rotating half-wave plates (HWP). The PMU is a crucial component to reach unprecedented sensitivity by mitigating systematic effects, including 1/f noise. We have developed a 1/10 scale prototype PMU of the LiteBIRD LFT, which has a 5-layer achromatic HWP and a diameter of 50 mm, spanning the observational frequency range of 34-161 GHz. The HWP is mounted on a superconducting magnetic bearing (SMB) as a rotor and levitated by a high-temperature superconductor as a stator. In this study, the entire PMU system is cooled down to 10 K in the cryostat chamber by a 4-K Gifford-McMahon (GM) cooler. We propagate an incident coherent millimeter-wave polarized signal throughout the rotating HWP and detect the modulated signal. We study the modulated optical signal and any rotational synchronous signals from the rotation mechanism. We describe the testbed system and the preliminary data acquired from this setup. This testbed is built to integrate the broadband HWP PMU and evaluate the potential systematic effects in the optical data. This way, we can plan with a full-scale model, which takes a long time for preparation and testing. △ Less

Submitted 7 August, 2022; originally announced August 2022.

Modelling TES non-linearity induced by a rotating HWP in a CMB polarimeter

Authors: Tommaso Ghigna, Tomotake Matsumura, Yuki Sakurai, Ryota Takaku, Kunimoto Komatsu, Shinya Sugiyama, Yurika Hoshino, Nobuhiko Katayama

Abstract: Most upcoming CMB experiments are planning to deploy between a few thousand and a few hundred thousand TES bolometers in order to drastically increase sensitivity and unveil the B-mode signal. Differential systematic effects and $1/f$ noise are two of the challenges that need to be overcome in order to achieve this result. In recent years, rotating Half-Wave Plates have become increasingly more po… ▽ More Most upcoming CMB experiments are planning to deploy between a few thousand and a few hundred thousand TES bolometers in order to drastically increase sensitivity and unveil the B-mode signal. Differential systematic effects and $1/f$ noise are two of the challenges that need to be overcome in order to achieve this result. In recent years, rotating Half-Wave Plates have become increasingly more popular as a solution to mitigate these effects, especially for those experiments that are targeting the largest angular scales. However, other effects may appear when a rotating HWP is being employed. In this paper we focus on HWP synchronous signals, which are due to intensity to polarization leakage induced by a rotating cryogenic multi-layer sapphire HWP employed as the first optical element of the telescope system. We use LiteBIRD LFT as a case study and we analyze the interaction between these spurious signals and TES bolometers, to determine whether this signal can contaminate the bolometer response. We present the results of simulations for a few different TES model assumptions and different spurious signal amplitudes. Modelling these effects is fundamental to find what leakage level can be tolerated and minimize non-linearity effects of the bolometer response. △ Less

Submitted 4 August, 2022; originally announced August 2022.

Comments: 7 pages, 4 figures, submitted to the Journal of Low Temperature Physics: LTD19 Special Edition

Testing magnetic interference between TES detectors and the telescope environment for future CMB satellite missions

Authors: Tommaso Ghigna, Thuong Duc Hoang, Takashi Hasebe, Yurika Hoshino, Nobuhiko Katayama, Kunimoto Komatsu, Adrian Lee, Tomotake Matsumura, Yuki Sakurai, Shinya Sugiyama, Aritoki Suzuki, Christopher Raum, Ryota Takaku, Benjamin Westbrook

Abstract: The two most common components of several upcoming CMB experiments are large arrays of superconductive TES (Transition-Edge Sensor) detectors and polarization modulator units, e.g. continuously-rotating Half-Wave Plates (HWP). A high detector count is necessary to increase the instrument raw sensitivity, however past experiments have shown that systematic effects are becoming one of the main limit… ▽ More The two most common components of several upcoming CMB experiments are large arrays of superconductive TES (Transition-Edge Sensor) detectors and polarization modulator units, e.g. continuously-rotating Half-Wave Plates (HWP). A high detector count is necessary to increase the instrument raw sensitivity, however past experiments have shown that systematic effects are becoming one of the main limiting factors to reach the sensitivity required to detect primordial $B$-modes. Therefore, polarization modulators have become popular in recent years to mitigate several systematic effects. Polarization modulators based on HWP technologies require a rotating mechanism to spin the plate and modulate the incoming polarized signal. In order to minimize heat dissipation from the rotating mechanism, which is a stringent requirement particularly for a space mission like $LiteBIRD$, we can employ a superconductive magnetic bearing to levitate the rotor and achieve contactless rotation. A disadvantage of this technique is the associated magnetic fields generated by those systems. In this paper we investigate the effects on a TES detector prototype and find no detectable $T_c$ variations due to an applied constant (DC) magnetic field, and a non-zero TES response to varying (AC) magnetic fields. We quantify a worst-case TES responsivity to the applied AC magnetic field of $\sim10^5$ pA/G, and give a preliminary interpretation of the pick-up mechanism. △ Less

Submitted 28 July, 2022; v1 submitted 27 July, 2022; originally announced July 2022.

Comments: 11 pages, 9 figures, 2 tables, SPIE Astronomical Telescopes + Instrumentation 2022

Journal ref: Proc.SPIE Int.Soc.Opt.Eng. 12190 (2022) 1107

Probing Cosmic Inflation with the LiteBIRD Cosmic Microwave Background Polarization Survey

Authors: LiteBIRD Collaboration, E. Allys, K. Arnold, J. Aumont, R. Aurlien, S. Azzoni, C. Baccigalupi, A. J. Banday, R. Banerji, R. B. Barreiro, N. Bartolo, L. Bautista, D. Beck, S. Beckman, M. Bersanelli, F. Boulanger, M. Brilenkov, M. Bucher, E. Calabrese, P. Campeti, A. Carones, F. J. Casas, A. Catalano, V. Chan, K. Cheung , et al. (166 additional authors not shown)

Abstract: LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is… ▽ More LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$μ$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects. △ Less

Submitted 27 March, 2023; v1 submitted 6 February, 2022; originally announced February 2022.

Comments: 155 pages, accepted for publication in PTEP

Mechanical strength and millimeter-wave transmittance spectrum of stacked sapphire plates bonded by sodium silicate solution

Authors: Takayuki Toda, Yuki Sakurai, Hirokazu Ishino, Tomotake Matsumura, Kunimoto Komatsu, Nobuhiko Katayama

Abstract: The polarization modulator unit for the low-frequency telescope in LiteBIRD employs an achromatic half-wave plate (AHWP). It consists of five layers of a-cut sapphire plate, which are stacked based on a Pancharatnam recipe. In this way, the retardance of the AHWP is a half-wave over a bandwidth of 34-161 GHz. The diameter of a single sapphire plate is about 500 mm and the thickness is 5 mm. When a… ▽ More The polarization modulator unit for the low-frequency telescope in LiteBIRD employs an achromatic half-wave plate (AHWP). It consists of five layers of a-cut sapphire plate, which are stacked based on a Pancharatnam recipe. In this way, the retardance of the AHWP is a half-wave over a bandwidth of 34-161 GHz. The diameter of a single sapphire plate is about 500 mm and the thickness is 5 mm. When a large diameter AHWP is used for a space mission, it is important for the AHWP to survive launch vibration. A preliminary study indicates that the five-layer stacked HWP has a risk of breakage at the launch unless the five layers are glued together and mechanically treated as one disk. We report our investigation using a sodium silicate solution that can bond the sapphire plates. This technique has been previously investigated as a candidate of cryogenic bonding for a mirror material, including sapphire, of the gravitational wave experiments: LIGO, VIRGO, and KAGRA. We experimentally studied the mechanical strength of the bonded interface for two different surface conditions: polished and unpolished. We demonstrated that the tensile and shear strength > 20 MPa for samples with a polished surface. This satisfied the requirement of 5.5 MPa derived from the mechanical simulation assuming a launch load of 30G. We identified that samples glued on a polished surface exhibit higher strength than unpolished ones by a factor of 2 for tensile and 18 for shear strength. We measured the millimeter-wave transmittance between 90 and 140 GHz using sapphire plates with a diameter of 50 mm before and after bonding. We did not find any optical effects caused by the bonded interface within 2% error in transmittance, which originates from the measurement system. △ Less

Submitted 15 October, 2021; originally announced October 2021.

Comments: 24 pages,10 figures

A Large Diameter Millimeter-Wave Low-Pass Filter Made of Alumina with Laser Ablated Anti-Reflection Coating

Authors: Ryota Takaku, Qi Wen, Scott Cray, Mark Devlin, Simon Dicker, Shaul Hanany, Takashi Hasebe, Teruhito Iida, Nobuhiko Katayama, Kuniaki Konishi, Makoto Kuwata-Gonokami, Tomotake Matsumura, Norikatsu Mio, Haruyuki Sakurai, Yuki Sakurai, Ryohei Yamada, Junji Yumoto

Abstract: We fabricated a 302 mm diameter low-pass filter made of alumina that has an anti-reflection coating (ARC) made with laser-ablated sub-wavelength structures (SWS). The filter has been integrated into and is operating with the MUSTANG2 instrument, which is coupled to the Green Bank Telescope. The average transmittance of the filter in the MUSTANG2 operating band between 75 and 105 GHz is 98%. Reflec… ▽ More We fabricated a 302 mm diameter low-pass filter made of alumina that has an anti-reflection coating (ARC) made with laser-ablated sub-wavelength structures (SWS). The filter has been integrated into and is operating with the MUSTANG2 instrument, which is coupled to the Green Bank Telescope. The average transmittance of the filter in the MUSTANG2 operating band between 75 and 105 GHz is 98%. Reflective loss due to the ARC is 1%. The difference in transmission between the s- and p-polarization states is less than 1%. To within 1% accuracy we observe no variance in these results when transmission is measured in six independent filter spatial locations. The alumina filter replaced a prior MUSTANG2 Teflon filter. Data taken with the filter heat sunk to its nominal 40 K stage show performance consistent with expectations: a reduction of about 50% in filters-induced optical power load on the 300 mK stage, and in in-band optical loading on the detectors. It has taken less than 4 days to laser-ablate the SWS on both sides of the alumina disk. This is the first report of an alumina filter with SWS ARC deployed with an operating instrument, and the first demonstration of a large area fabrication of SWS with laser ablation. △ Less

Submitted 21 January, 2022; v1 submitted 30 September, 2021; originally announced September 2021.

Comments: This version reflects the published version; 21 pages, 11 figures

Journal ref: Optics Express (2021), Volume 29, #25/6, Pg 41745

Testing the Non-circularity of the Spacetime around Sagittarius A* with Orbiting Pulsars

Authors: Yohsuke Takamori, Atsushi Naruko, Yusuke Sakurai, Keitaro Takahashi, Daisuke Yamauchi, Chul-Moon Yoo

Abstract: A disformal Kerr black hole solution is a rotating black hole solution in a modified gravity theory which breaks the circular condition of spacetime differently from the case of the Kerr spacetime. In this paper, assuming that Sagittarius A* (Sgr A*) is a disformal Kerr black hole, we examine the potential to test the spacetime geometry with a hypothetical pulsar whose orbital elements are similar… ▽ More A disformal Kerr black hole solution is a rotating black hole solution in a modified gravity theory which breaks the circular condition of spacetime differently from the case of the Kerr spacetime. In this paper, assuming that Sagittarius A* (Sgr A*) is a disformal Kerr black hole, we examine the potential to test the spacetime geometry with a hypothetical pulsar whose orbital elements are similar to those of the S2/S0-2 star. By numerically solving the equations of motion for the pulsar and photons emitted from it, we calculate the apparent position of the pulsar and the time of arrival (TOA) of the emitted pulse signals. Our analysis shows that the magnitude of the difference in the TOAs reaches the order of $10\>{\rm ms}$ if the deviation from the Kerr spacetime is significant. The time difference is mainly caused by the non-circularity of the spacetime at the $1.5$ post-Newtonian order. The accuracy of the TOA measurement by a future radio telescope named the Square Kilometer Array (SKA) is between about $0.1\>{\rm ms}$ and $10\>{\rm ms}$ for a normal pulsar. Thus, we expect that the SKA can distinguish the disformal Kerr black hole from the Kerr black hole through the non-circularity of the spacetime around Sgr A*. △ Less

Submitted 3 January, 2022; v1 submitted 30 August, 2021; originally announced August 2021.

Comments: 14 pages, 9 figures, 2 tables, accepted for publication in PASJ, replaced with the accepted manuscript

Report number: YITP-21-48

Material survey for millimeter-wave absorber using 3-D printed mold

Authors: T. Otsuka, S. Adachi, M. Hattori, Y. Sakurai, O. Tajima

Abstract: Radio absorptive materials (RAMs) are key elements for receivers in the millimeter-wave range. For astronomical applications, cryogenic receivers are widely used to achieve a high-sensitivity. These cryogenic receivers, in particular the receivers for the cosmic microwave background, require that the RAM has low surface reflectance ($\lesssim 1\%$) in a wide frequency range (20--300 GHz) to minimi… ▽ More Radio absorptive materials (RAMs) are key elements for receivers in the millimeter-wave range. For astronomical applications, cryogenic receivers are widely used to achieve a high-sensitivity. These cryogenic receivers, in particular the receivers for the cosmic microwave background, require that the RAM has low surface reflectance ($\lesssim 1\%$) in a wide frequency range (20--300 GHz) to minimize the undesired stray light to detectors. We develop a RAM that satisfies this requirement based on a production technology using a 3D-printed mold (named as RAM-3pm). This method allows us to shape periodic surface structures to achieve a low reflectance. A wide range of choices for the absorptive materials is an advantage. We survey the best material for the RAM-3pm. We measure the index of refraction ($n$) and the extinction coefficient ($κ$) at liquid nitrogen temperature as well as at room temperature of 17 materials. We also measure the reflectance at the room temperature for the selected materials. The mixture of an epoxy adhesive (STYCAST-2850FT) and a carbon fiber (K223HE) achieves the best performance. We estimate the optical performance at the liquid nitrogen temperature by a simulation based on the measured $n$ and $κ$. The RAM-3pm made with this material satisfies the requirement except at the lower edge of the frequency range ($\sim$20 GHz). We also estimate the reflectance of a larger pyramidal structure on the surface. We find a design to satisfy our requirement. △ Less

Submitted 29 May, 2021; originally announced May 2021.

Comments: 8 pages, 10 figures

Design of a frequency-independent optic axis Pancharatnam-based achromatic half-wave plate

Authors: Kunimoto Komatsu, Hirokazu Ishino, Nobuhiko Katayama, Tomotake Matsumura, Yuki Sakurai

Abstract: Pancharatnam-based achromatic half-wave plates (AHWP) achieve high polarization efficiency over a broad waveband. These AWHPs generally contain a property whereby the optic axis is dependent on the electromagnetic frequency of the incident radiation. When the AHWP is used to measure incident polarized radiation with a finite detection bandwidth, this frequency dependence causes an uncertainty in t… ▽ More Pancharatnam-based achromatic half-wave plates (AHWP) achieve high polarization efficiency over a broad waveband. These AWHPs generally contain a property whereby the optic axis is dependent on the electromagnetic frequency of the incident radiation. When the AHWP is used to measure incident polarized radiation with a finite detection bandwidth, this frequency dependence causes an uncertainty in the determination of the polarization angle due to the limited knowledge of the shape of the source spectrum and detection band. To mitigate this problem, we propose new designs of the AHWP which eliminate the frequency dependence of the optic axis over the bandwidth whilst maintaining high modulation efficiency. We carried out this optimization by tuning the relative angles among the individual half-wave plates of the five and nine layer AHWPs. The optimized set of relative angles achieves a frequency-independent optic axis over the fractional bandwidth, a bandwidth over which polarization efficiency is greater than 0.9, of 1.3 and 1.5 for the five and nine layer AHWPs, respectively. We also study the susceptibility of the alignment accuracy on the polarization efficiency and the frequency dependence of the optic axis, which provides a design guidance for each application. △ Less

Submitted 20 August, 2021; v1 submitted 12 May, 2021; originally announced May 2021.

Comments: 14 pages, 6 figures, Journal Astronomical Telescopes, Instruments, and Systems, accepted

Journal ref: J. Astron. Telesc. Instrum. Syst. 7(3), 034005 (2021)

Axion Cloud Decay due to the Axion-photon Conversion with Background Magnetic Fields

Authors: Chul-Moon Yoo, Atsushi Naruko, Yusuke Sakurai, Keitaro Takahashi, Yohsuke Takamori, Daisuke Yamauchi

Abstract: We consider an axion cloud around a black hole with background magnetic fields. We calculate the decay rate of the axion cloud due to the axion-photon conversion associated with the axion-photon coupling. For simplicity, we consider the situation where the axion configuration is dominated by a solution for the eigenvalue equation equivalent to that for the Hydrogen atom, and the coupling term can… ▽ More We consider an axion cloud around a black hole with background magnetic fields. We calculate the decay rate of the axion cloud due to the axion-photon conversion associated with the axion-photon coupling. For simplicity, we consider the situation where the axion configuration is dominated by a solution for the eigenvalue equation equivalent to that for the Hydrogen atom, and the coupling term can be evaluated by a successive perturbation method. For the monopole background, we find the decay rate of the axion cloud is given by $\sim q^2κ^2(GM)^5μ^8$, where $μ$, $M$, $G$, $κ$ and $q$ are the axion mass, black hole mass, gravitational constant, coupling constant of the axion-photon coupling and monopole charge, respectively. For the uniform background magnetic field, we obtain the decay rate of the axion cloud $\sim B_0^2κ^2 (GM)^7μ^6$, where $B_0$ is the magnetic field strength. Applying our formula to the central black hole in our galaxy, we find that the value of the decay rate for the case of the uniform magnetic field is comparable to the growth rate of the superradiant instability with $κ\sim 10^{-12}{\rm GeV^{-1}}$, $B_0\sim 10^3{\rm G}$ and $μ\sim 10^{-18}{\rm eV}$. The ratio is $10^5$ times larger for the monopole magnetic field with the same values of the parameters. △ Less

Submitted 8 June, 2021; v1 submitted 24 March, 2021; originally announced March 2021.

Comments: 16 pages

Report number: YITP-21-23

Overview of the Medium and High Frequency Telescopes of the LiteBIRD satellite mission

Authors: L. Montier, B. Mot, P. de Bernardis, B. Maffei, G. Pisano, F. Columbro, J. E. Gudmundsson, S. Henrot-Versillé, L. Lamagna, J. Montgomery, T. Prouvé, M. Russell, G. Savini, S. Stever, K. L. Thompson, M. Tsujimoto, C. Tucker, B. Westbrook, P. A. R. Ade, A. Adler, E. Allys, K. Arnold, D. Auguste, J. Aumont, R. Aurlien , et al. (212 additional authors not shown)

Abstract: LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular… ▽ More LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34GHz to 448GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium- and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89-224GHz) and the High-Frequency Telescope (166-448GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD. △ Less

Submitted 1 February, 2021; originally announced February 2021.

Comments: SPIE Conference

Journal ref: Proc. of SPIE Vol. 11443 14432G (2020)

LiteBIRD: JAXA's new strategic L-class mission for all-sky surveys of cosmic microwave background polarization

Authors: M. Hazumi, P. A. R. Ade, A. Adler, E. Allys, K. Arnold, D. Auguste, J. Aumont, R. Aurlien, J. Austermann, C. Baccigalupi, A. J. Banday, R. Banjeri, R. B. Barreiro, S. Basak, J. Beall, D. Beck, S. Beckman, J. Bermejo, P. de Bernardis, M. Bersanelli, J. Bonis, J. Borrill, F. Boulanger, S. Bounissou, M. Brilenkov , et al. (213 additional authors not shown)

Abstract: LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave backgrou… ▽ More LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes. △ Less

Submitted 29 January, 2021; originally announced January 2021.

Comments: 20 pages, 9 figures

Journal ref: Proc. of SPIE Vol. 11443 114432F (2020)

Simons Observatory Small Aperture Telescope overview

Authors: Kenji Kiuchi, Shunsuke Adachi, Aamir M. Ali, Kam Arnold, Peter Ashton, Jason E. Austermann, Andrew Bazako, James A. Beall, Yuji Chinone, Gabriele Coppi, Kevin D. Crowley, Kevin T. Crowley, Simon Dicker, Bradley Dober, Shannon M. Duff, Giulio Fabbian, Nicholas Galitzki, Joseph E. Golec, Jon E. Gudmundsson, Kathleen Harrington, Masaya Hasegawa, Makoto Hattori, Charles A. Hill, Shuay-Pwu Patty Ho, Johannes Hubmayr , et al. (29 additional authors not shown)

Abstract: The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment from the Atacama Desert in Chile comprising three small-aperture telescopes (SATs) and one large-aperture telescope (LAT). In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain… ▽ More The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment from the Atacama Desert in Chile comprising three small-aperture telescopes (SATs) and one large-aperture telescope (LAT). In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities. In this work, we focus on the SATs which are optimized to search for primordial gravitational waves that are detected as parity-odd polarization patterns called a B-modes on degree scales in the CMB. Each SAT employs a single optics tube with TES arrays operating at 100 mK. The high throughput optics system has a 42 cm aperture and a 35-degree field of view coupled to a 36 cm diameter focal plane. The optics consist of three metamaterial anti-re ection coated silicon lenses. Cryogenic ring baffles with engineered blackbody absorbers are installed in the optics tube to minimize the stray light. The entire optics tube is cooled to 1 K. A cryogenic continuously rotating half-wave plate near the sky side of the aperture stop helps to minimize the effect of atmospheric uctuations. The telescope warm baffling consists of a forebaffle, an elevation stage mounted co-moving shield, and a fixed ground shield that together control the far side-lobes and mitigates ground-synchronous systematics. We present the status of the SAT development. △ Less

Submitted 28 January, 2021; originally announced January 2021.

Comments: 8 pages, 6 figures

Journal ref: Proc. SPIE 11445, Ground-based and Airborne Telescopes VIII, 114457L (18 December 2020)

Concept Design of Low Frequency Telescope for CMB B-mode Polarization satellite LiteBIRD

Authors: Y. Sekimoto, P. A. R. Ade, A. Adler, E. Allys, K. Arnold, D. Auguste, J. Aumont, R. Aurlien, J. Austermann, C. Baccigalupi, A. J. Banday, R. Banerji, R. B. Barreiro, S. Basak, J. Beall, D. Beck, S. Beckman, J. Bermejo, P. de Bernardis, M. Bersanelli, J. Bonis, J. Borrill, F. Boulanger, S. Bounissou, M. Brilenkov , et al. (212 additional authors not shown)

Abstract: LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray li… ▽ More LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented. △ Less

Submitted 15 January, 2021; originally announced January 2021.

Comments: 21 pages, 14 figures

Journal ref: SPIE proceedings 1145310 (2020)

A cryogenic continuously rotating half-wave plate for the POLARBEAR-2b cosmic microwave background receiver

Authors: C. A. Hill, A. Kusaka, P. Ashton, P. Barton, T. Adkins, K. Arnold, B. Bixler, S. Ganjam, A. T. Lee, F. Matsuda, T. Matsumura, Y. Sakurai, R. Tat, Y. Zhou

Abstract: We present the design and laboratory evaluation of a cryogenic continuously rotating half-wave plate (CHWP) for the POLARBEAR-2b (PB-2b) cosmic microwave background (CMB) receiver, the second installment of the Simons Array. PB-2b will observe at 5,200 m elevation in the Atacama Desert of Chile in two frequency bands centered at 90 and 150 GHz. In order to suppress atmospheric 1/f noise and mitiga… ▽ More We present the design and laboratory evaluation of a cryogenic continuously rotating half-wave plate (CHWP) for the POLARBEAR-2b (PB-2b) cosmic microwave background (CMB) receiver, the second installment of the Simons Array. PB-2b will observe at 5,200 m elevation in the Atacama Desert of Chile in two frequency bands centered at 90 and 150 GHz. In order to suppress atmospheric 1/f noise and mitigate systematic effects that arise when differencing orthogonal detectors, PB-2b modulates linear sky polarization using a CHWP rotating at 2 Hz. The CHWP has a 440 mm clear aperture diameter and is cooled to $\approx$ 50 K in the PB-2b receiver cryostat. It consists of a low-friction superconducting magnetic bearing (SMB) and a low-torque synchronous electromagnetic motor, which together dissipate < 2 W. During cooldown, a grip-and-release mechanism centers the rotor to < 0.5 mm, and during continuous rotation, an incremental optical encoder measures the rotor angle with a noise level of 0.1 $\mathrm{μrad / \sqrt{Hz}}$. We discuss the experimental requirements for the PB-2b CHWP, the designs of its various subsystems, and the results of its evaluation in the laboratory. The presented CHWP has been deployed to Chile and is expected to see first light on PB-2b in 2020 or 2021. △ Less

Submitted 10 September, 2020; v1 submitted 8 September, 2020; originally announced September 2020.

Comments: PREPRINT. Submitted to Review of Scientific Instruments, September 2020. v2 updates refs 41-42

Radiative feedback for supermassive star formation in a massive cloud with H2 molecules in an atomic-cooling halo

Authors: Yuya Sakurai, Zoltán Haiman, Kohei Inayoshi

Abstract: Recent three-dimensional cosmological simulations of protogalaxy formation have suggested that supermassive stars (SMSs) can form in gas clouds in which H$_2$ cooling is suppressed by dynamical heating prior to the activation of atomic cooling (Wise et al. 2019), but they stopped short of the following growth of a central protostar. Here we examine whether accretion on the protostellar core in thi… ▽ More Recent three-dimensional cosmological simulations of protogalaxy formation have suggested that supermassive stars (SMSs) can form in gas clouds in which H$_2$ cooling is suppressed by dynamical heating prior to the activation of atomic cooling (Wise et al. 2019), but they stopped short of the following growth of a central protostar. Here we examine whether accretion on the protostellar core in this cloud is sufficiently rapid, in the face of the radiation feedback, to produce a SMS. We perform one-dimensional radiation-hydrodynamical simulations of the hot collapsing cloud with non-equilibrium chemical reactions directly adopting the cloud properties from Wise et al. (2019) as an initial condition. We find that the stellar Lyman-Werner (LW) radiation from the SMS dissociates H$_2$ in the inner regions of the gas flow, increasing gas temperature and thermal pressure, and temporarily stopping the accretion. However, this negative feedback ceases when the self-gravity and inward ram pressure force on larger scales push the gas inward. The central protostar is unable to expand an HII region due to the high density, and grows to a mass of $\gtrsim10^5\,{{\rm M}_\odot}$. Our results suggests the successful formation of SMSs, and resulting massive ($\sim10^5\,{{\rm M}_\odot}$) remnant black holes in the clouds, but need to be confirmed in two- or three-dimensional simulations. △ Less

Submitted 13 October, 2020; v1 submitted 5 September, 2020; originally announced September 2020.

Comments: 13 pages, 7 figures, accepted by MNRAS

Broadband, millimeter-wave anti-reflective structures on sapphire ablated with femto-second laser

Authors: R. Takaku, S. Hanany, H. Imada, H. Ishino, N. Katayama, K. Komatsu, K. Konishi, M. Kuwata-Gonokami, T. Matsumura, K. Mitsuda, H. Sakurai, Y. Sakurai, Q. Wen, N. Y. Yamasaki, K. Young, J. Yumoto

Abstract: We designed, fabricated, and measured anti-reflection coating (ARC) on sapphire that has 116% fractional bandwidth and transmission of at least 97% in the millimeter wave band. The ARC was based on patterning pyramid-like sub-wavelength structures (SWS) using ablation with a 15 W femto-second laser operating at 1030 nm. One side of each of two discs was fabricated with SWS that had a pitch of 0.54… ▽ More We designed, fabricated, and measured anti-reflection coating (ARC) on sapphire that has 116% fractional bandwidth and transmission of at least 97% in the millimeter wave band. The ARC was based on patterning pyramid-like sub-wavelength structures (SWS) using ablation with a 15 W femto-second laser operating at 1030 nm. One side of each of two discs was fabricated with SWS that had a pitch of 0.54 mm and height of 2 mm. The average ablation volume removal rate was 1.6 mm$^{3}$/min. Measurements of the two-disc sandwich show transmission higher than 97% between 43 and 161 GHz. We characterize instrumental polarization (IP) arising from differential transmission due to asymmetric SWS. We find that with proper alignment of the two disc sandwich RMS IP across the band is predicted to be 0.07% at normal incidence, and less than 0.6% at incidence angles up to 20 degrees. These results indicate that laser ablation of SWS on sapphire and on other hard materials such as alumina is an effective way to fabricate broad-band ARC. △ Less

Submitted 16 December, 2020; v1 submitted 30 July, 2020; originally announced July 2020.

Journal ref: Journal of Applied Physics, 128(22), 225302 (2020)

Small Aperture Telescopes for the Simons Observatory

Authors: Aamir M. Ali, Shunsuke Adachi, Kam Arnold, Peter Ashton, Andrew Bazarko, Yuji Chinone, Gabriele Coppi, Lance Corbett, Kevin D Crowley, Kevin T Crowley, Mark Devlin, Simon Dicker, Shannon Duff, Chris Ellis, Nicholas Galitzki, Neil Goeckner-Wald, Kathleen Harrington, Erin Healy, Charles A Hill, Shuay-Pwu Patty Ho, Johannes Hubmayr, Brian Keating, Kenji Kiuchi, Akito Kusaka, Adrian T Lee , et al. (27 additional authors not shown)

Abstract: The Simons Observatory (SO) is an upcoming cosmic microwave background (CMB) experiment located on Cerro Toco, Chile, that will map the microwave sky in temperature and polarization in six frequency bands spanning 27 to 285 GHz. SO will consist of one 6-meter Large Aperture Telescope (LAT) fielding $\sim$30,000 detectors and an array of three 0.42-meter Small Aperture Telescopes (SATs) fielding an… ▽ More The Simons Observatory (SO) is an upcoming cosmic microwave background (CMB) experiment located on Cerro Toco, Chile, that will map the microwave sky in temperature and polarization in six frequency bands spanning 27 to 285 GHz. SO will consist of one 6-meter Large Aperture Telescope (LAT) fielding $\sim$30,000 detectors and an array of three 0.42-meter Small Aperture Telescopes (SATs) fielding an additional 30,000 detectors. This synergy will allow for the extremely sensitive characterization of the CMB over angular scales ranging from an arcmin to tens of degrees, enabling a wide range of scientific output. Here we focus on the SATs targeting degree angular scales with successive dichroic instruments observing at Mid-Frequency (MF: 93/145 GHz), Ultra-High-Frequency (UHF: 225/285 GHz), and Low-Frequency (LF: 27/39 GHz). The three SATs will be able to map $\sim$10% of the sky to a noise level of 2 $μ$K-arcmin when combining 93 and 145 GHz. The multiple frequency bands will allow the CMB to be separated from galactic foregrounds (primarily synchrotron and dust), with the primary science goal of characterizing the primordial tensor-to-scalar ratio, $r$, at a target level of $σ\left(r\right) \approx 0.003$. △ Less

Submitted 23 January, 2020; v1 submitted 21 January, 2020; originally announced January 2020.

Updated design of the CMB polarization experiment satellite LiteBIRD

Authors: H. Sugai, P. A. R. Ade, Y. Akiba, D. Alonso, K. Arnold, J. Aumont, J. Austermann, C. Baccigalupi, A. J. Banday, R. Banerji, R. B. Barreiro, S. Basak, J. Beall, S. Beckman, M. Bersanelli, J. Borrill, F. Boulanger, M. L. Brown, M. Bucher, A. Buzzelli, E. Calabrese, F. J. Casas, A. Challinor, V. Chan, Y. Chinone , et al. (196 additional authors not shown)

Abstract: Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will ac… ▽ More Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the cosmic microwave background (CMB) by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34GHz and 448GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5Kelvin for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for three years. An international collaboration between Japan, USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science (ISAS), JAXA selected LiteBIRD as the strategic large mission No. 2. △ Less

Submitted 6 January, 2020; originally announced January 2020.

Comments: Journal of Low Temperature Physics, in press

Journal ref: Journal of Low Temperature Physics 199, 1107 (2020)

Design of a testbed for the study of system interference in space CMB polarimetry

Authors: Tommaso Ghigna, Tomotake Matsumura, Masashi Hazumi, Samantha Lynn Stever, Yuki Sakurai, Nobuhiko Katayama, Aritoki Suzuki, Benjamin Westbrook, Adrian Lee

Abstract: LiteBIRD is a proposed JAXA satellite mission to measure the CMB B-mode polarization with unprecedented sensitivity ($σ_r\sim 0.001$). To achieve this goal, $4676$ state-of-the-art TES bolometers will observe the whole sky for 3 years from L2. These detectors, as well as the SQUID readout, are extremely susceptible to EMI and other instrumental disturbances e.g. static magnetic field and vibration… ▽ More LiteBIRD is a proposed JAXA satellite mission to measure the CMB B-mode polarization with unprecedented sensitivity ($σ_r\sim 0.001$). To achieve this goal, $4676$ state-of-the-art TES bolometers will observe the whole sky for 3 years from L2. These detectors, as well as the SQUID readout, are extremely susceptible to EMI and other instrumental disturbances e.g. static magnetic field and vibration. As a result, careful analysis of the interference between the detector system and the rest of the telescope instruments is essential. This study is particularly important during the early phase of the project, in order to address potential problems before the final assembly of the whole instrument. We report our plan for the preparation of a cryogenic testbed to study the interaction between the detectors and other subsystems, especially a polarization modulator unit consisting of a magnetically-rotating half wave plate. We also present the requirements, current status and preliminary results. △ Less

Submitted 26 November, 2019; originally announced November 2019.

Comments: 7 pages, 4 figures, 2 tables, submitted to the Journal of Low Temperature Physics: LTD18 Special Edition

The Simons Observatory: Astro2020 Decadal Project Whitepaper

Authors: The Simons Observatory Collaboration, Maximilian H. Abitbol, Shunsuke Adachi, Peter Ade, James Aguirre, Zeeshan Ahmed, Simone Aiola, Aamir Ali, David Alonso, Marcelo A. Alvarez, Kam Arnold, Peter Ashton, Zachary Atkins, Jason Austermann, Humna Awan, Carlo Baccigalupi, Taylor Baildon, Anton Baleato Lizancos, Darcy Barron, Nick Battaglia, Richard Battye, Eric Baxter, Andrew Bazarko, James A. Beall, Rachel Bean , et al. (258 additional authors not shown)

Abstract: The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021… ▽ More The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021 and start a five year survey in 2022. SO has 287 collaborators from 12 countries and 53 institutions, including 85 students and 90 postdocs. The SO experiment in its currently funded form ('SO-Nominal') consists of three 0.4 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT). Optimized for minimizing systematic errors in polarization measurements at large angular scales, the SATs will perform a deep, degree-scale survey of 10% of the sky to search for the signature of primordial gravitational waves. The LAT will survey 40% of the sky with arc-minute resolution. These observations will measure (or limit) the sum of neutrino masses, search for light relics, measure the early behavior of Dark Energy, and refine our understanding of the intergalactic medium, clusters and the role of feedback in galaxy formation. With up to ten times the sensitivity and five times the angular resolution of the Planck satellite, and roughly an order of magnitude increase in mapping speed over currently operating ("Stage 3") experiments, SO will measure the CMB temperature and polarization fluctuations to exquisite precision in six frequency bands from 27 to 280 GHz. SO will rapidly advance CMB science while informing the design of future observatories such as CMB-S4. △ Less

Submitted 16 July, 2019; originally announced July 2019.

Comments: Astro2020 Decadal Project Whitepaper. arXiv admin note: text overlap with arXiv:1808.07445

Journal ref: Bull. Am. Astron. Soc. 51 (2019) 147

Demonstration of the broadband half-wave plate using the nine-layer sapphire for the CMB polarization experiment

Authors: Kunimoto Komatsu, Tomotake Matsumura, Hiroaki Imada, Hirokazu Ishino, Nobuhiko Katayama, Yuki Sakurai

Abstract: We report the development of the achromatic half-wave plate (AHWP) at millimeter wave for cosmic microwave background polarization experiments. We fabricate an AHWP consisting of nine a-cut sapphire plates based on the Pancharatnam recipe to cover a wide frequency range. The modulation efficiency and the phase are measured in a frequency range of 33 to 260 GHz with incident angles up to 10 degrees… ▽ More We report the development of the achromatic half-wave plate (AHWP) at millimeter wave for cosmic microwave background polarization experiments. We fabricate an AHWP consisting of nine a-cut sapphire plates based on the Pancharatnam recipe to cover a wide frequency range. The modulation efficiency and the phase are measured in a frequency range of 33 to 260 GHz with incident angles up to 10 degrees. We find the measurements at room temperature are in good agreement with the predictions. This is the broadest demonstration of the AHWP at the millimeter wave. △ Less

Submitted 22 January, 2020; v1 submitted 31 May, 2019; originally announced May 2019.

Comments: 24 pages, 16 figures

Journal ref: J. Astron. Telesc. Instrum. Syst. 5(4), 044008 (2019)

Shape and Rotational Motion Models for Tumbling and Monolithic Asteroid 2012 $\mathrm{TC_4}$:High Time Resolution Lightcurve with the Tomo-e Gozen Camera

Authors: Seitaro Urakawa, Ryou Ohsawa, Shigeyuki Sako, Shin-ichiro Okumura, Yuri Sakurai, Jun Takahashi, Kazuyoshi Imamura, Hiroyuki Naito, Fumitake Watanabe, Ryoma Nagayoshi, Yasuhiko Murakami, Ryo Okazaki, Tomohiko Sekiguchi, Masateru Ishiguro, Tatsuhiro Michikami, Makoto Yoshikawa

Abstract: We present visible and near-infrared observations of a near-Earth object (NEO), 2012 $\mathrm{TC_4}$. The NEO 2012 $\mathrm{TC_4}$ approached close to the Earth at a distance of about 50,000 km in October 2017. This close approach provided a practical exercise for planetary defense. This apparition was also an appropriate opportunity to investigate 2012 $\mathrm{TC_4}$, which is a monolithic aster… ▽ More We present visible and near-infrared observations of a near-Earth object (NEO), 2012 $\mathrm{TC_4}$. The NEO 2012 $\mathrm{TC_4}$ approached close to the Earth at a distance of about 50,000 km in October 2017. This close approach provided a practical exercise for planetary defense. This apparition was also an appropriate opportunity to investigate 2012 $\mathrm{TC_4}$, which is a monolithic asteroid \citep{Polishook13}. We conducted the observation campaign of 2012 $\mathrm{TC_4}$ using six small- and medium-sized telescopes. The multiband photometry analysis showed that the taxonomic class of 2012 $\mathrm{TC_4}$ to be an X-type. In particular, we successfully obtained the high time resolution lightcurve of 2012 $\mathrm{TC_4}$ with the Tomo-e Gozen camera, which is the world's first wide-field CMOS camera, mounted on the 1.05 m Schmidt telescope at Kiso Observatory. The shape and rotational motion models of 2012 $\mathrm{TC_4}$ were derived from the lightcurve. When 2012 $\mathrm{TC_4}$ was assumed to be a triaxial ellipsoid, the rotational and precession periods were 8.47 $\pm$ 0.01 min and 12.25 $\pm$ 0.01 min, respectively, with the long axis mode. This indicates that 2012 $\mathrm{TC_4}$ is a tumbling and monolithic asteroid. The shape models showed that the plausible axial lengths to be 6.2 $\times$ 8.0 $\times$ 14.9~m or 3.3 $\times$ 8.0 $\times$ 14.3~m. The flattened and elongated shape indicates that 2012 $\mathrm{TC_4}$ is a fragment produced by a impact event. We also estimated the excitation timescale, which implied that the impact event happened within $\sim$3 $\times$ 10$^{5}$ yr and 2012 $\mathrm{TC_4}$ has a fresh surface. △ Less

Submitted 13 March, 2019; originally announced March 2019.

Comments: 20 pages, 7 figures

Titans of the Early Universe: The Prato Statement on the Origin of the First Supermassive Black Holes

Authors: Tyrone E. Woods, Bhaskar Agarwal, Volker Bromm, Andrew Bunker, Ke-Jung Chen, Sunmyon Chon, Andrea Ferrara, Simon C. O. Glover, Lionel Haemmerle, Zoltan Haiman, Tilman Hartwig, Alexander Heger, Shingo Hirano, Takashi Hosokawa, Kohei Inayoshi, Ralf S. Klessen, Chiaki Kobayashi, Filippos Koliopanos, Muhammad A. Latif, Yuexing Li, Lucio Mayer, Mar Mezcua, Priyamvada Natarajan, Fabio Pacucci, Martin J. Rees , et al. (8 additional authors not shown)

Abstract: In recent years, the discovery of massive quasars at z~7 has provided a striking challenge to our understanding of the origin and growth of supermassive black holes in the early Universe. Mounting observational and theoretical evidence indicates the viability of massive seeds, formed by the collapse of supermassive stars, as a progenitor model for such early, massive accreting black holes. Althoug… ▽ More In recent years, the discovery of massive quasars at z~7 has provided a striking challenge to our understanding of the origin and growth of supermassive black holes in the early Universe. Mounting observational and theoretical evidence indicates the viability of massive seeds, formed by the collapse of supermassive stars, as a progenitor model for such early, massive accreting black holes. Although considerable progress has been made in our theoretical understanding, many questions remain regarding how (and how often) such objects may form, how they live and die, and how next generation observatories may yield new insight into the origin of these primordial titans. This review focusses on our present understanding of this remarkable formation scenario, based on discussions held at the Monash Prato Centre from November 20--24, 2017, during the workshop "Titans of the Early Universe: The Origin of the First Supermassive Black Holes." △ Less

Submitted 22 May, 2019; v1 submitted 29 October, 2018; originally announced October 2018.

Comments: Solicited review article (accepted) for Publications of the Astronomical Society of Australia. 38 pages, 15 figures, 1 table

Growth of intermediate mass black holes by tidal disruption events in the first star clusters

Authors: Yuya Sakurai, Naoki Yoshida, Michiko S. Fujii

Abstract: We study the stellar dynamics of the first star clusters after intermediate-mass black holes (IMBHs) are formed via runaway stellar collisions. We use the outputs of cosmological simulations of Sakurai et al. (2017) to follow the star cluster evolution in a live dark matter (DM) halo. Mass segregation within a cluster promotes massive stars to be captured by the central IMBH occasionally, causing… ▽ More We study the stellar dynamics of the first star clusters after intermediate-mass black holes (IMBHs) are formed via runaway stellar collisions. We use the outputs of cosmological simulations of Sakurai et al. (2017) to follow the star cluster evolution in a live dark matter (DM) halo. Mass segregation within a cluster promotes massive stars to be captured by the central IMBH occasionally, causing tidal disruption events (TDEs). We find that the TDE rate scales with the IMBH mass as $\dot{N}_{\rm TDE}\sim0.3\,{\rm Myr}^{-1}(M_{\rm IMBH}/1000\,{\rm M}_{\odot})^2$. The DM component affects the star cluster evolution by stripping stars from the outer part. When the DM density within the cluster increases, the velocity dispersion of the stars increases, and then the TDE rate decreases. By the TDEs, the central IMBHs grow to as massive as $700-2500\,{\rm M}_{\odot}$ in 15 million years. The IMBHs are possible seeds for the formation of supermassive BHs observed at $z\gtrsim 6-7$, if a large amount of gas is supplied through galaxy mergers and/or large-scale gas accretion, or they might remain as IMBHs from the early epochs to the present-day Universe. △ Less

Submitted 29 January, 2019; v1 submitted 3 October, 2018; originally announced October 2018.

Comments: accepted by MNRAS

The Simons Observatory: Science goals and forecasts

Authors: The Simons Observatory Collaboration, Peter Ade, James Aguirre, Zeeshan Ahmed, Simone Aiola, Aamir Ali, David Alonso, Marcelo A. Alvarez, Kam Arnold, Peter Ashton, Jason Austermann, Humna Awan, Carlo Baccigalupi, Taylor Baildon, Darcy Barron, Nick Battaglia, Richard Battye, Eric Baxter, Andrew Bazarko, James A. Beall, Rachel Bean, Dominic Beck, Shawn Beckman, Benjamin Beringue, Federico Bianchini , et al. (225 additional authors not shown)

Abstract: The Simons Observatory (SO) is a new cosmic microwave background experiment being built on Cerro Toco in Chile, due to begin observations in the early 2020s. We describe the scientific goals of the experiment, motivate the design, and forecast its performance. SO will measure the temperature and polarization anisotropy of the cosmic microwave background in six frequency bands: 27, 39, 93, 145, 225… ▽ More The Simons Observatory (SO) is a new cosmic microwave background experiment being built on Cerro Toco in Chile, due to begin observations in the early 2020s. We describe the scientific goals of the experiment, motivate the design, and forecast its performance. SO will measure the temperature and polarization anisotropy of the cosmic microwave background in six frequency bands: 27, 39, 93, 145, 225 and 280 GHz. The initial configuration of SO will have three small-aperture 0.5-m telescopes (SATs) and one large-aperture 6-m telescope (LAT), with a total of 60,000 cryogenic bolometers. Our key science goals are to characterize the primordial perturbations, measure the number of relativistic species and the mass of neutrinos, test for deviations from a cosmological constant, improve our understanding of galaxy evolution, and constrain the duration of reionization. The SATs will target the largest angular scales observable from Chile, mapping ~10% of the sky to a white noise level of 2 $μ$K-arcmin in combined 93 and 145 GHz bands, to measure the primordial tensor-to-scalar ratio, $r$, at a target level of $σ(r)=0.003$. The LAT will map ~40% of the sky at arcminute angular resolution to an expected white noise level of 6 $μ$K-arcmin in combined 93 and 145 GHz bands, overlapping with the majority of the LSST sky region and partially with DESI. With up to an order of magnitude lower polarization noise than maps from the Planck satellite, the high-resolution sky maps will constrain cosmological parameters derived from the damping tail, gravitational lensing of the microwave background, the primordial bispectrum, and the thermal and kinematic Sunyaev-Zel'dovich effects, and will aid in delensing the large-angle polarization signal to measure the tensor-to-scalar ratio. The survey will also provide a legacy catalog of 16,000 galaxy clusters and more than 20,000 extragalactic sources. △ Less

Submitted 1 March, 2019; v1 submitted 22 August, 2018; originally announced August 2018.

Comments: This paper presents an overview of the Simons Observatory science goals, details about the instrument will be presented in a companion paper. The author contribution to this paper is available at https://simonsobservatory.org/publications.php (Abstract abridged) -- matching version published in JCAP

Journal ref: JCAP 1902 (2019) 056

A large-diameter cryogenic rotation stage for half-wave plate polarization modulation on the POLARBEAR-2 experiment

Authors: Charles A. Hill, Akito Kusaka, Paul Barton, Bryce Bixler, Alex G. Droster, Mael Flament, Suhas Ganjam, Arian Jadbabaie, Oliver Jeong, Adrian T. Lee, Alex Madurowicz, Fred T. Matsuda, Tomotake Matsumura, Adam Rutkowski, Yuki Sakurai, Danielle R. Sponseller, Aritoki Suzuki, Raymond Tat

Abstract: We describe the design of a cryogenic rotation stage (CRS) for use with the cryogenic half-wave plate (CHWP) polarization modulator on the POLARBEAR-2b and POLARBEAR-2c (PB2b/c) cosmic microwave background (CMB) experiments, the second and third installments of the Simons Array. Rapid modulation of the CMB polarization signal using a CHWP suppresses 1/f contamination due to atmospheric turbulence… ▽ More We describe the design of a cryogenic rotation stage (CRS) for use with the cryogenic half-wave plate (CHWP) polarization modulator on the POLARBEAR-2b and POLARBEAR-2c (PB2b/c) cosmic microwave background (CMB) experiments, the second and third installments of the Simons Array. Rapid modulation of the CMB polarization signal using a CHWP suppresses 1/f contamination due to atmospheric turbulence and allows a single polarimeter to measure both polarization states, mitigating systematic effects that arise when differencing orthogonal detectors. To modulate the full detector array while avoiding excess photon loading due to thermal emission, the CHWP must have a clear-aperture diameter of > 450 mm and be cooled to < 100 K. We have designed a 454-mm-clear-aperture, < 65 K CRS using a superconducting magnetic bearing driven by a synchronous magnetic motor. We present the specifications for the CRS, its interfacing to the PB2b/c receiver cryostat, its performance in a stand-alone test, and plans for future work. △ Less

Submitted 25 May, 2018; originally announced May 2018.

Comments: PREPRINT VERSION. Accepted to the Journal of Low Temperature Physics, Article JLTP-D-17-00265R1 See DOI link, supplied by Springer Publishing, for the fully-reviewed published article and citation information

The LiteBIRD Satellite Mission - Sub-Kelvin Instrument

Authors: A. Suzuki, P. A. R. Ade, Y. Akiba, D. Alonso, K. Arnold, J. Aumont, C. Baccigalupi, D. Barron, S. Basak, S. Beckman, J. Borrill, F. Boulanger, M. Bucher, E. Calabrese, Y. Chinone, H-M. Cho, A. Cukierman, D. W. Curtis, T. de Haan, M. Dobbs, A. Dominjon, T. Dotani, L. Duband, A. Ducout, J. Dunkley , et al. (127 additional authors not shown)

Abstract: Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through B-mode (d… ▽ More Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through B-mode (divergent-free) polarization pattern embedded in the Cosmic Microwave Background anisotropies. If detected, these signals would provide strong evidence for inflation, point to the correct model for inflation, and open a window to physics at ultra-high energies. LiteBIRD is a satellite mission with a goal of detecting degree-and-larger-angular-scale B-mode polarization. LiteBIRD will observe at the second Lagrange point with a 400 mm diameter telescope and 2,622 detectors. It will survey the entire sky with 15 frequency bands from 40 to 400 GHz to measure and subtract foregrounds. The U.S. LiteBIRD team is proposing to deliver sub-Kelvin instruments that include detectors and readout electronics. A lenslet-coupled sinuous antenna array will cover low-frequency bands (40 GHz to 235 GHz) with four frequency arrangements of trichroic pixels. An orthomode-transducer-coupled corrugated horn array will cover high-frequency bands (280 GHz to 402 GHz) with three types of single frequency detectors. The detectors will be made with Transition Edge Sensor (TES) bolometers cooled to a 100 milli-Kelvin base temperature by an adiabatic demagnetization refrigerator.The TES bolometers will be read out using digital frequency multiplexing with Superconducting QUantum Interference Device (SQUID) amplifiers. Up to 78 bolometers will be multiplexed with a single SQUID amplidier. We report on the sub-Kelvin instrument design and ongoing developments for the LiteBIRD mission. △ Less

Submitted 15 March, 2018; v1 submitted 22 January, 2018; originally announced January 2018.

Comments: 7 pages 2 figures Journal of Low Temperature Physics - Special edition - LTD17 Proceeding

Formation of the first star clusters and massive star binaries by fragmentation of filamentary primordial gas clouds

Authors: Shingo Hirano, Naoki Yoshida, Yuya Sakurai, Michiko S. Fujii

Abstract: We perform a set of cosmological simulations of early structure formation with incorporating baryonic streaming motions. We present a case where a significantly elongated gas cloud with $\sim\!10^4\,$solar masses (${\rm M_\odot}$) is formed in a pre-galactic ($\sim\!10^7\,{\rm M_\odot}$) dark halo. The gas streaming into the halo compresses and heats the massive filamentary cloud to a temperature… ▽ More We perform a set of cosmological simulations of early structure formation with incorporating baryonic streaming motions. We present a case where a significantly elongated gas cloud with $\sim\!10^4\,$solar masses (${\rm M_\odot}$) is formed in a pre-galactic ($\sim\!10^7\,{\rm M_\odot}$) dark halo. The gas streaming into the halo compresses and heats the massive filamentary cloud to a temperature of $\sim\!10,000\,$Kelvin. The gas cloud cools rapidly by atomic hydrogen cooling, and then by molecular hydrogen cooling down to $\sim\!400\,$Kelvin. The rapid decrease of the temperature and hence of the Jeans mass triggers fragmentation of the filament to yield multiple gas clumps with a few hundred solar masses. We estimate the mass of the primordial star formed in each fragment by adopting an analytic model based on a large set of radiation hydrodynamics simulations of protostellar evolution. The resulting stellar masses are in the range of $\sim\!50$-$120\,{\rm M_\odot}$. The massive stars gravitationally attract each other and form a compact star cluster. We follow the dynamics of the star cluster using a hybrid $N$-body simulation. We show that massive star binaries are formed in a few million years through multi-body interactions at the cluster center. The eventual formation of the remnant black holes will leave a massive black hole binary, which can be a progenitor of strong gravitational wave sources similar to those recently detected by the Advanced Laser Interferometer Gravitational-Wave Observatory (LIGO). △ Less

Submitted 20 February, 2018; v1 submitted 20 November, 2017; originally announced November 2017.

Comments: 13 pages, 11 figures, 2 tables, accepted to ApJ

Massive Outflows Driven by Magnetic Effects II: Comparison with Observations

Authors: Yuko Matsushita, Yuya Sakurai, Takashi Hosokawa, Masahiro N. Machida

Abstract: The driving mechanism of massive outflows observed in high-mass star-forming regions is investigated using three-dimensional magnetohydrodynamics (MHD) and protostellar evolution calculations. In our previous paper, we showed that the mass outflow rate depends strongly on the mass accretion rate onto the circumstellar disk around a high-mass protostar, and massive outflows may be driven by the mag… ▽ More The driving mechanism of massive outflows observed in high-mass star-forming regions is investigated using three-dimensional magnetohydrodynamics (MHD) and protostellar evolution calculations. In our previous paper, we showed that the mass outflow rate depends strongly on the mass accretion rate onto the circumstellar disk around a high-mass protostar, and massive outflows may be driven by the magnetic effect in high-mass star-forming cores. In the present study, in order to verify that the MHD disk wind is the primary driving mechanism of massive outflows, we quantitatively compare outflow properties obtained through simulations and observations. Since the outflows obtained through simulations are slightly younger than those obtained through observations, the time-integrated quantities of outflow mass, momentum, and kinetic energy are slightly smaller than those obtained through observations. On the other hand, time-derivative quantities of mass ejection rate, outflow momentum flux, and kinetic luminosity obtained through simulations are in very good agreement with those obtained through observations. This indicates that the MHD disk wind greatly contributes to the massive outflow driving from high-mass protostars, and the magnetic field might significantly control the high-mass star formation process. △ Less

Submitted 15 November, 2017; originally announced November 2017.

Comments: 16 pages, 8 figures

The effect of accretion on the pre-main-sequence evolution of low-mass stars and brown dwarfs

Authors: Eduard Vorobyov, Vardan Elbakyan, Takashi Hosokawa, Yuya Sakurai, Manuel Guedel, Harold Yorke

Abstract: The pre-main-sequence evolution of low-mass stars and brown dwarfs is studied numerically starting from the formation of a protostellar/proto-brown dwarf seed and taking into account the mass accretion onto the central object during the initial several Myr of evolution. The stellar evolution was computed using the STELLAR evolution code developed by Yorke & Bodenheimer with recent modifications by… ▽ More The pre-main-sequence evolution of low-mass stars and brown dwarfs is studied numerically starting from the formation of a protostellar/proto-brown dwarf seed and taking into account the mass accretion onto the central object during the initial several Myr of evolution. The stellar evolution was computed using the STELLAR evolution code developed by Yorke & Bodenheimer with recent modifications by Hosokawa et al. The mass accretion rates were taken from numerical hydrodynamics models of Vorobyov & Basu computing the circumstellar disk evolution starting from the gravitational collapse of pre-stellar cloud cores of various mass and angular momentum. The resulting stellar evolution tracks were compared with the isochrones and isomasses calculated using non-accreting models. We find that mass accretion in the initial several Myr of protostellar evolution can have a strong effect on the subsequent evolution of young stars and brown dwarfs. The disagreement between accreting and non-accreting models in terms of the total stellar luminosity L_st, stellar radius R_st and effective temperature T_eff depends on the thermal efficiency of accretion, i.e., on the fraction of accretion energy absorbed by the central object. The largest mismatch is found for the cold accretion case, in which essentially all accretion energy is radiated away. The relative deviations in L_st and R_st in this case can reach 50% for 1.0-Myr-old objects and remain notable even for 10-Myr-old objects. In the hot and hybrid accretion cases, in which a constant fraction of accretion energy is absorbed, the disagreement between accreting and non-accreting models becomes less pronounced, but still remains notable for 1.0-Myr-old objects. These disagreements may lead to the wrong age estimate for objects of (sub-)solar mass when using the isochrones based on non-accreting models (abridged). △ Less

Submitted 1 June, 2017; originally announced June 2017.

Comments: 17 pages, 9 figures, accepted for publication by Astronomy & Astrophysics

Formation of Intermediate-Mass Black Holes through Runaway Collisions in the First Star Clusters

Authors: Yuya Sakurai, Naoki Yoshida, Michiko S. Fujii, Shingo Hirano

Abstract: We study the formation of massive black holes in the first star clusters. We first locate star-forming gas clouds in proto-galactic haloes of $\gtrsim \!10^7\,{\rm M}_{\odot}$ in cosmological hydrodynamics simulations and use them to generate the initial conditions for star clusters with masses of $\sim \!10^5\,{\rm M}_{\odot}$. We then perform a series of direct-tree hybrid $N$-body simulations t… ▽ More We study the formation of massive black holes in the first star clusters. We first locate star-forming gas clouds in proto-galactic haloes of $\gtrsim \!10^7\,{\rm M}_{\odot}$ in cosmological hydrodynamics simulations and use them to generate the initial conditions for star clusters with masses of $\sim \!10^5\,{\rm M}_{\odot}$. We then perform a series of direct-tree hybrid $N$-body simulations to follow runaway stellar collisions in the dense star clusters. In all the cluster models except one, runaway collisions occur within a few million years, and the mass of the central, most massive star reaches $\sim \!400-1900\,{\rm M}_{\odot}$. Such very massive stars collapse to leave intermediate-mass black holes (IMBHs). The diversity of the final masses may be attributed to the differences in a few basic properties of the host haloes such as mass, central gas velocity dispersion, and mean gas density of the central core. Finally, we derive the IMBH mass to cluster mass ratios, and compare them with the observed black hole to bulge mass ratios in the present-day Universe. △ Less

Submitted 13 August, 2017; v1 submitted 20 April, 2017; originally announced April 2017.

Comments: 9 pages, 6 figures, accepted in MNRAS

Massive Outflows Driven by Magnetic Effects in Star Forming Clouds with High Mass Accretion Rates

Authors: Yuko Matsushita, Masahiro N. Machida, Yuya Sakurai, Takashi Hosokawa

Abstract: The relation between the mass accretion rate onto the circumstellar disc and the rate of mass ejection by magnetically driven winds is investigated using three-dimensional magnetohydrodynamics simulations. Using a spherical cloud core with a varying ratio of thermal to gravitational energy, which determines the mass accretion rate onto the disc, to define the initial conditions, the outflow propag… ▽ More The relation between the mass accretion rate onto the circumstellar disc and the rate of mass ejection by magnetically driven winds is investigated using three-dimensional magnetohydrodynamics simulations. Using a spherical cloud core with a varying ratio of thermal to gravitational energy, which determines the mass accretion rate onto the disc, to define the initial conditions, the outflow propagation for approximately 10^4 yr after protostar formation is then calculated for several cloud cores. The mass ejection rate and accretion rate are comparable only when the magnetic energy of the initial cloud core is comparable to the gravitational energy. Consequently, in strongly magnetised clouds a higher mass accretion rate naturally produces both massive protostars and massive outflows. The simulated outflow mass, momentum, kinetic energy and momentum flux agree well with observations, indicating that massive stars form through the same mechanism as low-mass stars but require a significantly strong magnetic field to launch massive outflows. △ Less

Submitted 11 April, 2017; originally announced April 2017.

Comments: 52 pages, 18 figures, accepted for publication by MNRAS

Grand Design Spiral Arms in A Young Forming Circumstellar Disk

Authors: Kengo Tomida, Masahiro N. Machida, Takashi Hosokawa, Yuya Sakurai, Chia Hui Lin

Abstract: We study formation and long-term evolution of a circumstellar disk in a collapsing molecular cloud core using a resistive magnetohydrodynamic simulation. While the formed circumstellar disk is initially small, it grows as accretion continues and its radius becomes as large as 200 AUs toward the end of the Class-I phase. A pair of grand-design spiral arms form due to gravitational instability in th… ▽ More We study formation and long-term evolution of a circumstellar disk in a collapsing molecular cloud core using a resistive magnetohydrodynamic simulation. While the formed circumstellar disk is initially small, it grows as accretion continues and its radius becomes as large as 200 AUs toward the end of the Class-I phase. A pair of grand-design spiral arms form due to gravitational instability in the disk, and they transfer angular momentum in the highly resistive disk. Although the spiral arms disappear in a few rotations as expected in a classical theory, new spiral arms form recurrently as the disk soon becomes unstable again by gas accretion. Such recurrent spiral arms persist throughout the Class-0 and I phase. We then perform synthetic observations and compare our model with a recent high-resolution observation of a young stellar object Elias 2-27, whose circumstellar disk has grand design spiral arms. We find good agreement between our theoretical model and the observation. Our model suggests that the grand design spiral arms around Elias 2-27 are consistent with material arms formed by gravitational instability. If such spiral arms commonly exist in young circumstellar disks, it implies that young circumstellar disks are considerably massive and gravitational instability is the key process of angular momentum transport. △ Less

Submitted 16 January, 2017; v1 submitted 28 November, 2016; originally announced November 2016.

Comments: Accepted for publication in The Astrophysical Journal Letters. 8 pages, 5 figures. Supplemental movie: http://vega.ess.sci.osaka-u.ac.jp/~tomida/resources/tomida2016movie.avi

Hyper-Eddington mass accretion onto a black hole with super-Eddington luminosity

Authors: Yuya Sakurai, Kohei Inayoshi, Zoltán Haiman

Abstract: We perform one-dimensional radiation hydrodynamical simulations to solve accretion flows onto massive black holes (BHs) with a very high rate. Assuming that photon trapping limits the luminosity emerging from the central region to $L\lesssim L_{\rm Edd}$, Inayoshi, Haiman & Ostriker (2016) have shown that an accretion flow settles to a "hyper-Eddington" solution, with a steady and isothermal (… ▽ More We perform one-dimensional radiation hydrodynamical simulations to solve accretion flows onto massive black holes (BHs) with a very high rate. Assuming that photon trapping limits the luminosity emerging from the central region to $L\lesssim L_{\rm Edd}$, Inayoshi, Haiman & Ostriker (2016) have shown that an accretion flow settles to a "hyper-Eddington" solution, with a steady and isothermal ($T\simeq 8000$ K) Bondi profile reaching $\gtrsim 5000$ times the Eddington accretion rate $\dot{M}_{\rm Edd}\equiv L_{\rm Edd}/c^2$. Here we address the possibility that gas accreting with finite angular momentum forms a bright nuclear accretion disc, with a luminosity exceeding the Eddington limit ($1\lesssim L/L_{\rm Edd}\lesssim 100$). Combining our simulations with an analytic model, we find that a transition to steady hyper-Eddington accretion still occurs, as long as the luminosity remains below $L/L_{\rm Edd}\lesssim 35~(M_{\rm BH}/10^4~M_\odot)^{3/2}(n_\infty/10^5~{\rm cm^{-3}})(T_\infty/10^4~{\rm K})^{-3/2}(r_{\star}/10^{14}~{\rm cm})^{-1/2}$, where $n_\infty$ and $T_\infty$ are the density and temperature of the ambient gas, and $r_\star$ is the radius of the photosphere, at which radiation emerges. If the luminosity exceeds this value, accretion becomes episodic. Our results can be accurately recovered in a toy model of an optically thick spherical shell, driven by radiation force into a collapsing medium. When the central source is dimmer than the above critical value, the expansion of the shell is halted and reversed by ram pressure of the collapsing medium, and by shell's weight. Our results imply that rapid, unimpeded hyper-Eddington accretion is possible even if the luminosity of the central source far exceeds the Eddington limit, and can be either steady or strongly episodic. △ Less

Submitted 6 July, 2016; v1 submitted 30 May, 2016; originally announced May 2016.

Comments: 10 pages, 9 figures, accepted by MNRAS

Supermassive star formation via episodic accretion: protostellar disc instability and radiative feedback efficiency

Authors: Yuya Sakurai, Eduard I. Vorobyov, Takashi Hosokawa, Naoki Yoshida, Kazuyuki Omukai, Harold W. Yorke

Abstract: The formation of SMSs is a potential pathway to seed SMBHs in the early universe. A critical issue for forming SMSs is stellar UV feedback, which may limit the stellar mass growth via accretion. In this paper we study the evolution of an accreting SMS and its UV emissivity under conditions of realistic variable accretion from a self-gravitating circumstellar disc. First we conduct a 2D hydrodynami… ▽ More The formation of SMSs is a potential pathway to seed SMBHs in the early universe. A critical issue for forming SMSs is stellar UV feedback, which may limit the stellar mass growth via accretion. In this paper we study the evolution of an accreting SMS and its UV emissivity under conditions of realistic variable accretion from a self-gravitating circumstellar disc. First we conduct a 2D hydrodynamical simulation to follow the long-term protostellar accretion until the stellar mass exceeds $10^4~M_\odot$. The disc fragments due to gravitational instability, creating a number of small clumps that rapidly migrate inward to fall onto the star. The resulting accretion history is thus highly time-dependent: short episodic accretion bursts are followed by longer, relative quiescent phases. We show that the circumstellar disc for the so-called direct collapse model is more unstable and generates greater variability over shorter timescales than normal Pop III cases. We conduct a post-process stellar evolution calculation using the obtained accretion history. Our results show that, regardless of the strong variability of the accretion rates, the stellar radius monotonically increases with almost constant effective temperature at $T_{\rm eff} \simeq 5000$ K as the stellar mass increases. The resulting UV feedback is too weak to hinder mass accretion due to the low flux of stellar UV photons, thus verifying our implicit assumption of no stellar feedback during the hydrodynamic simulations. The insensitivity of stellar evolution to variable accretion is attributed to the fact that typical timescales of variability, $\lesssim 10^3$ years, are too short to affect the stellar structure. We argue that this evolution will continue until the SMS eventually collapses to produce a massive black hole by the general relativistic instability after the stellar mass reaches $\gtrsim 10^5~M_\odot$. △ Less

Submitted 19 November, 2015; originally announced November 2015.

Comments: 9 pages, 6 figures, submitted to MNRAS

Formation of primordial supermassive stars by burst accretion

Authors: Y. Sakurai, T. Hosokawa, N. Yoshida, H. W. Yorke

Abstract: A promising formation channel of SMBHs at redshift 6 is the so-called DC model, which posits that a massive seed BH forms through gravitational collapse of a $\sim 10^5~M_\odot$ SMS. We study the evolution of such a SMS growing by rapid mass accretion. In particular, we examine the impact of time-dependent mass accretion of repeating burst and quiescent phases that are expected to occur with a sel… ▽ More A promising formation channel of SMBHs at redshift 6 is the so-called DC model, which posits that a massive seed BH forms through gravitational collapse of a $\sim 10^5~M_\odot$ SMS. We study the evolution of such a SMS growing by rapid mass accretion. In particular, we examine the impact of time-dependent mass accretion of repeating burst and quiescent phases that are expected to occur with a self-gravitating circumstellar disk. We show that the stellar evolution with such episodic accretion differs qualitatively from that expected with a constant accretion rate, even if the mean accretion rate is the same. Unlike the case of constant mass accretion, whereby the star expands roughly following $R_* \simeq 2.6 \times 10^3 R_\odot (M_*/100~M_\odot)^{1/2}$, the protostar can substantially contract during the quiescent phases between accretion bursts. The stellar effective temperature and ionizing photon emissivity increase accordingly as the star contracts, which can cause strong ionizing feedback and halt the mass accretion onto the star. With a fixed duration of the quiescent phase $Δt_{\rm q}$, such contraction occurs in early evolutionary phases, i.e. for $M_* \lesssim 10^3~M_\odot$ with $Δt_{\rm q} \simeq 10^3$ yr. For later epochs and larger masses but the same $Δt_{\rm q}$, contraction is negligible even during quiescent phases. With larger quiescent times $Δt_{\rm q}$, however, the star continues to contract during quiescent phases even for the higher stellar masses. We show that such behavior is well understood by comparing the interval time and the thermal relaxation time for a bloated surface layer. We conclude that the UV radiative feedback becomes effective if the quiescent phase associated by the burst accretion is longer than $\sim 10^3$ yr, which is possible in an accretion disk forming in the direct collapse model. △ Less

Submitted 14 May, 2015; originally announced May 2015.

Comments: 10 pages, 7 figures, submitted to MNRAS