Showing 1–6 of 6 results for author: Farias, N

The LiteBIRD mission to explore cosmic inflation

Authors: T. Ghigna, A. Adler, K. Aizawa, H. Akamatsu, R. Akizawa, E. Allys, A. Anand, J. Aumont, J. Austermann, S. Azzoni, C. Baccigalupi, M. Ballardini, A. J. Banday, R. B. Barreiro, N. Bartolo, S. Basak, A. Basyrov, S. Beckman, M. Bersanelli, M. Bortolami, F. Bouchet, T. Brinckmann, P. Campeti, E. Carinos, A. Carones , et al. (134 additional authors not shown)

Abstract: LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-… ▽ More LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-year mission, LiteBIRD will employ three telescopes within 15 unique frequency bands (ranging from 34 through 448 GHz), targeting a sensitivity of 2.2\,$μ$K-arcmin and a resolution of 0.5$^\circ$ at 100\,GHz. Its primary goal is to measure the tensor-to-scalar ratio $r$ with an uncertainty $δr = 0.001$, including systematic errors and margin. If $r \geq 0.01$, LiteBIRD expects to achieve a $>5σ$ detection in the $\ell=$2-10 and $\ell=$11-200 ranges separately, providing crucial insight into the early Universe. We describe LiteBIRD's scientific objectives, the application of systems engineering to mission requirements, the anticipated scientific impact, and the operations and scanning strategies vital to minimizing systematic effects. We will also highlight LiteBIRD's synergies with concurrent CMB projects. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Comments: 23 pages, 9 figures, 1 table, SPIE Astronomical Telescopes + Instrumentation 2024

Development of the Low Frequency Telescope focal plane detector arrays for LiteBIRD

Authors: Tommaso Ghigna, Aritoki Suzuki, Benjamin Westbrook, Christopher Raum, Hiroki Akamatsu, Shawn Beckman, Nicole Farias, Tijmen de Haan, Nils Halverson, Masashi Hazumi, Johannes Hubmayr, Greg Jaehnig, Adrian T. Lee, Samantha L. Stever, Yu Zhou

Abstract: LiteBIRD, a forthcoming JAXA mission, aims to accurately study the microwave sky within the 40-400 GHz frequency range divided into 15 distinct nominal bands. The primary objective is to constrain the CMB inflationary signal, specifically the primordial B-modes. LiteBIRD targets the CMB B-mode signal on large angular scales, where the primordial inflationary signal is expected to dominate, with th… ▽ More LiteBIRD, a forthcoming JAXA mission, aims to accurately study the microwave sky within the 40-400 GHz frequency range divided into 15 distinct nominal bands. The primary objective is to constrain the CMB inflationary signal, specifically the primordial B-modes. LiteBIRD targets the CMB B-mode signal on large angular scales, where the primordial inflationary signal is expected to dominate, with the goal of reaching a tensor-to-scalar ratio sensitivity of $σ_r\sim0.001$. LiteBIRD frequency bands will be split among three telescopes, with some overlap between telescopes for better control of systematic effects. Here we report on the development status of the detector arrays for the Low Frequency Telescope (LFT), which spans the 34-161 GHz range, with 12 bands subdivided between four types of trichroic pixels consisting of lenslet-coupled sinuous antennas. The signal from the antenna is bandpass filtered and sensed by AlMn Transition-Edge Sensors (TES). We provide an update on the status of the design and development of LiteBIRD's LFT LF1 (40-60-78 GHz), LF2 (50-68-89 GHz) pixels. We discuss design choices motivated by LiteBIRD scientific goals. In particular we focus on the details of the optimization of the design parameters of the sinuous antenna, on-chip bandpass filters, cross-under and impedance transformers and all the RF components that define the LF1 and LF2 pixel detection chain. We present this work in the context of the technical challenges and physical constraints imposed by the finite size of the instrument. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Comments: 12 pages, 10 figures, 1 table, SPIE 2024

Calibration of detector time constant with a thermal source for the POLARBEAR-2A CMB polarization experiment

Authors: S. Takatori, M. Hasegawa, M. Hazumi, D. Kaneko, N. Katayama, A. T. Lee, S. Takakura, T. Tomaru, T. Adkins, D. Barron, Y. Chinone, K. T. Crowley, T. de Haan, T. Elleflot, N. Farias, C. Feng, T. Fujino, J. C. Groh, H. Hirose, F. Matsuda, H. Nishino, Y. Segawa, P. Siritanasak, A. Suzuki, K. Yamada

Abstract: The Simons Array (SA) project is a ground-based Cosmic Microwave Background (CMB) polarization experiment. The SA observes the sky using three telescopes, and POLARBEAR-2A (PB-2A) is the receiver system on the first telescope. For the ground-based experiment, atmospheric fluctuation is the primary noise source that could cause polarization leakage. In the PB-2A receiver system, a continuously rota… ▽ More The Simons Array (SA) project is a ground-based Cosmic Microwave Background (CMB) polarization experiment. The SA observes the sky using three telescopes, and POLARBEAR-2A (PB-2A) is the receiver system on the first telescope. For the ground-based experiment, atmospheric fluctuation is the primary noise source that could cause polarization leakage. In the PB-2A receiver system, a continuously rotating half-wave plate (HWP) is used to mitigate the polarization leakage. However, due to the rapid modulation of the polarization signal, the uncertainty in the time constant of the detector results in an uncertainty in the polarization angle. For PB-2A, the time constant of each bolometer needs to be calibrated at the sub-millisecond level to avoid introducing bias to the polarization signal. We have developed a new calibrator system that can be used to calibrate the time constants of the detectors. In this study, we present the design of the calibration system and the preliminary results of the time constant calibration for PB-2A. △ Less

Submitted 25 March, 2024; originally announced March 2024.

Comments: Proceedings of the 15th Asia Pacific Physics Conference (APPC15)

Anti-reflection coating with mullite and Duroid for large-diameter cryogenic sapphire and alumina optics

Authors: Kana Sakaguri, Masaya Hasegawa, Yuki Sakurai, Junna Sugiyama, Nicole Farias, Charles Hill, Bradley R. Johnson, Kuniaki Konishi, Akito Kusaka, Adrian T. Lee, Tomotake Matsumura, Edward J. Wollack, Junji Yumoto

Abstract: We developed a broadband two-layer anti-reflection (AR) coating for use on a sapphire half-wave plate (HWP) and an alumina infrared (IR) filter for the cosmic microwave background (CMB) polarimetry. Measuring the faint CMB B-mode signals requires maximizing the number of photons reaching the detectors and minimizing spurious polarization due to reflection with an off-axis incident angle. Sapphire… ▽ More We developed a broadband two-layer anti-reflection (AR) coating for use on a sapphire half-wave plate (HWP) and an alumina infrared (IR) filter for the cosmic microwave background (CMB) polarimetry. Measuring the faint CMB B-mode signals requires maximizing the number of photons reaching the detectors and minimizing spurious polarization due to reflection with an off-axis incident angle. Sapphire and alumina have high refractive indices of 3.1 and are highly reflective without an AR coating. This paper presents the design, fabrication, quality control, and measured performance of an AR coating using thermally-sprayed mullite and Duroid 5880LZ. This technology enables large optical elements with diameters of 600 mm. We also present a newly developed thermography-based nondestructive quality control technique, which is key to assuring good adhesion and preventing delamination when thermal cycling. We demonstrate the average reflectance of about 2.6% (0.9%) for two observing bands centered at 90/150 (220/280) GHz. At room temperature, the average transmittance of a 105 mm square test sample at 220/280 GHz is 83%, and it will increase to 90% at 100 K, attributed to reduced absorption losses. Therefore, our developed layering technique has proved effective for 220/280 GHz applications, particularly in addressing dielectric loss concerns. This AR coating technology has been deployed in the cryogenic HWP and IR filters of the Simons Array and the Simons observatory experiments and applies to future experiments such as CMB-S4. △ Less

Submitted 19 December, 2023; originally announced December 2023.

Journal ref: Applied Optics Vol. 63, Issue 6, pp. 1618-1627 (2024)

Development of the Low Frequency Telescope Focal Plane Detector Modules for LiteBIRD

Authors: Benjamin Westbrook, Christopher Raum, Shawn Beckman, Adrian T. Lee, Nicole Farias, Andrew Bogdan, Amber Hornsby, Aritoki Suzuki, Kaja Rotermund, Tucker Elleflot, Jason E. Austermann, James A. Beall, Shannon M. Duff, Johannes Hubmayr, Michael R. Vissers, Michael J. Link, Greg Jaehnig, Nils Halverson, Tomasso Ghigna, Masashi Hazumi, Samantha Stever, Yuto Minami, Keith L. Thompson, Megan Russell, Kam Arnold , et al. (1 additional authors not shown)

Abstract: LiteBIRD is a JAXA-led strategic large-class satellite mission designed to measure the polarization of the cosmic microwave background and Galactic foregrounds from 34 to 448 GHz across the entire sky from L2 in the late 2020s. The scientific payload includes three telescopes which are called the low-, mid-, and high-frequency telescopes each with their own receiver that covers a portion of the mi… ▽ More LiteBIRD is a JAXA-led strategic large-class satellite mission designed to measure the polarization of the cosmic microwave background and Galactic foregrounds from 34 to 448 GHz across the entire sky from L2 in the late 2020s. The scientific payload includes three telescopes which are called the low-, mid-, and high-frequency telescopes each with their own receiver that covers a portion of the mission's frequency range. The low frequency telescope will map synchrotron radiation from the Galactic foreground and the cosmic microwave background. We discuss the design, fabrication, and characterization of the low-frequency focal plane modules for low-frequency telescope, which has a total bandwidth ranging from 34 to 161 GHz. There will be a total of 4 different pixel types with 8 overlapping bands to cover the full frequency range. These modules are housed in a single low-frequency focal plane unit which provides thermal isolation, mechanical support, and radiative baffling for the detectors. The module design implements multi-chroic lenslet-coupled sinuous antenna arrays coupled to transition edge sensor bolometers read out with frequency-domain mulitplexing. While this technology has strong heritage in ground-based cosmic microwave background experiments, the broad frequency coverage, low optical loading conditions, and the high cosmic ray background of the space environment require further development of this technology to be suitable for LiteBIRD. In these proceedings, we discuss the optical and bolometeric characterization of a triplexing prototype pixel with bands centered on 78, 100, and 140 GHz. △ Less

Submitted 20 September, 2022; originally announced September 2022.

Comments: SPIE Astronomical Telescope + Instrumentation (AS22)

Report number: 12190-30

Journal ref: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI 2022

Detector fabrication development for the LiteBIRD satellite mission

Authors: Benjamin Westbrook, Christopher Raum, Shawn Beckman, Adrian T. Lee, Nicole Farias, Trevor Sasse, Aritoki Suzuki, Elijah Kane, Jason E. Austermann, James A Beall, Shannon M. Duff, Johannes Hubmayr, Gene C. Hilton, Jeff Van Lanen, Michael R. Vissers, Michael R. Link, Greg Jaehnig, Nils Halverson, Tommaso Ghinga, Samantha Stever, Yuto Minami, Keith L. Thompson, Megan Russell, Kam Arnold, Joseph Siebert , et al. (2 additional authors not shown)

Abstract: LiteBIRD is a JAXA-led strategic Large-Class satellite mission designed to measure the polarization of the cosmic microwave background and cosmic foregrounds from 34 to 448 GHz across the entire sky from L2 in the late 2020's. The primary focus of the mission is to measure primordially generated B-mode polarization at large angular scales. Beyond its primary scientific objective LiteBIRD will gene… ▽ More LiteBIRD is a JAXA-led strategic Large-Class satellite mission designed to measure the polarization of the cosmic microwave background and cosmic foregrounds from 34 to 448 GHz across the entire sky from L2 in the late 2020's. The primary focus of the mission is to measure primordially generated B-mode polarization at large angular scales. Beyond its primary scientific objective LiteBIRD will generate a data-set capable of probing a number of scientific inquiries including the sum of neutrino masses. The primary responsibility of United States will be to fabricate the three flight model focal plane units for the mission. The design and fabrication of these focal plane units is driven by heritage from ground based experiments and will include both lenslet-coupled sinuous antenna pixels and horn-coupled orthomode transducer pixels. The experiment will have three optical telescopes called the low frequency telescope, mid frequency telescope, and high frequency telescope each of which covers a portion of the mission's frequency range. JAXA is responsible for the construction of the low frequency telescope and the European Consortium is responsible for the mid- and high- frequency telescopes. The broad frequency coverage and low optical loading conditions, made possible by the space environment, require development and adaptation of detector technology recently deployed by other cosmic microwave background experiments. This design, fabrication, and characterization will take place at UC Berkeley, NIST, Stanford, and Colorado University, Boulder. We present the current status of the US deliverables to the LiteBIRD mission. △ Less

Submitted 13 January, 2021; originally announced January 2021.

Comments: SPIE, Cosmology, LiteBIRD, Detectors, TES, Bolometers, Inflation, Sinuous Antenna, Horn Coupled, DfMUX