-
Vibrational modes as the origin of dielectric loss at 0.27$\unicode{x2013}$100 THz in a-SiC:H
Authors:
B. T. Buijtendorp,
A. Endo,
W. Jellema,
K. Karatsu,
K. Kouwenhoven,
D. Lamers,
A. J. van der Linden,
K. Rostem,
M. Veen,
E. J. Wollack,
J. J. A. Baselmans,
S. Vollebregt
Abstract:
Low-loss deposited dielectrics are beneficial for the advancement of superconducting integrated circuits for astronomy. In the microwave band ($\mathrm{\sim}$1$\unicode{x2013}$10 GHz) the cryogenic and low-power dielectric loss is dominated by two-level systems. However, the origin of the loss in the millimeter-submillimeter band ($\mathrm{\sim}$0.1$\unicode{x2013}$1 THz) is not understood. We mea…
▽ More
Low-loss deposited dielectrics are beneficial for the advancement of superconducting integrated circuits for astronomy. In the microwave band ($\mathrm{\sim}$1$\unicode{x2013}$10 GHz) the cryogenic and low-power dielectric loss is dominated by two-level systems. However, the origin of the loss in the millimeter-submillimeter band ($\mathrm{\sim}$0.1$\unicode{x2013}$1 THz) is not understood. We measured the loss of hydrogenated amorphous SiC (a-SiC:H) films in the 0.27$\unicode{x2013}$100 THz range using superconducting microstrip resonators and Fourier-transform spectroscopy. The agreement between the loss data and a Maxwell-Helmholtz-Drude dispersion model suggests that vibrational modes above 10 THz dominate the loss in the a-SiC:H above 200 GHz.
△ Less
Submitted 24 May, 2024; v1 submitted 22 May, 2024;
originally announced May 2024.
-
Directional Filter Design and Simulation for Superconducting On-chip Filter-banks
Authors:
Louis H. Marting,
Kenichi Karatsu,
Akira Endo,
Jochem J. A. Baselmans,
Alejandro Pascual Laguna
Abstract:
Many superconducting on-chip filter-banks suffer from poor coupling to the detectors behind each filter. This is a problem intrinsic to the commonly used half wavelength filter, which has a maximum theoretical coupling of 50 %. In this paper we introduce a phase coherent filter, called a directional filter, which has a theoretical coupling of 100 %. In order to to study and compare different types…
▽ More
Many superconducting on-chip filter-banks suffer from poor coupling to the detectors behind each filter. This is a problem intrinsic to the commonly used half wavelength filter, which has a maximum theoretical coupling of 50 %. In this paper we introduce a phase coherent filter, called a directional filter, which has a theoretical coupling of 100 %. In order to to study and compare different types of filter-banks, we first analyze the measured filter frequency scatter, losses, and spectral resolution of a DESHIMA 2.0 filter-bank chip. Based on measured fabrication tolerances and losses, we adapt the input parameters for our circuit simulations, quantitatively reproducing the measurements. We find that the frequency scatter is caused by nanometer-scale line-width variations and that variances in the spectral resolution is caused by losses in the dielectric only. Finally, we include these realistic parameters in a full filter-bank model and simulate a wide range of spectral resolutions and oversampling values. For all cases the directional filter-bank has significantly higher coupling to the detectors than the half-wave resonator filter-bank. The directional filter eliminates the need to use oversampling as a method to improve the total efficiency, instead capturing nearly all the power remaining after dielectric losses.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Optimisation-based alignment of wideband integrated superconducting spectrometers for sub-mm astronomy
Authors:
A. Moerman,
K. Karatsu,
S. J. C. Yates,
R. Huiting,
F. Steenvoorde,
S. O. Dabironezare,
T. Takekoshi,
J. J. A. Baselmans,
B. R. Brandl,
A. Endo
Abstract:
Integrated superconducting spectrometers (ISSs) for wideband sub-mm astronomy utilise quasi-optical systems for coupling radiation from the telescope to the instrument. Misalignment in these systems is detrimental to the system performance. The common method of using an optical laser to align the quasi-optical components requires accurate alignment of the laser to the sub-mm beam coming from the i…
▽ More
Integrated superconducting spectrometers (ISSs) for wideband sub-mm astronomy utilise quasi-optical systems for coupling radiation from the telescope to the instrument. Misalignment in these systems is detrimental to the system performance. The common method of using an optical laser to align the quasi-optical components requires accurate alignment of the laser to the sub-mm beam coming from the instrument, which is not always guaranteed to a sufficient accuracy. We develop an alignment strategy for wideband ISSs directly utilising the sub-mm beam of the wideband ISS. The strategy should be applicable in both telescope and laboratory environments. Moreover, the strategy should deliver similar quality of the alignment across the spectral range of the wideband ISS. We measure misalignment in a quasi-optical system operating at sub-mm wavelengths using a novel phase and amplitude measurement scheme, capable of simultaneously measuring the complex beam patterns of a direct-detecting ISS across a harmonic range of frequencies. The direct detection nature of the MKID detectors in our device-under-test, DESHIMA 2.0, necessitates the use of this measurement scheme. Using geometrical optics, the measured misalignment, a mechanical hexapod, and an optimisation algorithm, we follow a numerical approach to optimise the positioning of corrective optics with respect to a given cost function. Laboratory measurements of the complex beam patterns are taken across a harmonic range between 205 and 391 GHz and simulated through a model of the ASTE telescope in order to assess the performance of the optimisation at the ASTE telescope. Laboratory measurements show that the optimised optical setup corrects for tilts and offsets of the sub-mm beam. Moreover, we find that the simulated telescope aperture efficiency is increased across the frequency range of the ISS after the optimisation.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments
Authors:
Nemanja Jovanovic,
Pradip Gatkine,
Narsireddy Anugu,
Rodrigo Amezcua-Correa,
Ritoban Basu Thakur,
Charles Beichman,
Chad Bender,
Jean-Philippe Berger,
Azzurra Bigioli,
Joss Bland-Hawthorn,
Guillaume Bourdarot,
Charles M. Bradford,
Ronald Broeke,
Julia Bryant,
Kevin Bundy,
Ross Cheriton,
Nick Cvetojevic,
Momen Diab,
Scott A. Diddams,
Aline N. Dinkelaker,
Jeroen Duis,
Stephen Eikenberry,
Simon Ellis,
Akira Endo,
Donald F. Figer
, et al. (55 additional authors not shown)
Abstract:
Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio…
▽ More
Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
DESHIMA 2.0: Rapid redshift surveys and multi-line spectroscopy of dusty galaxies
Authors:
M. Rybak,
T. Bakx,
J. Baselmans,
K. Karatsu,
K. Kohno,
T. Takekoshi,
Y. Tamura,
A. Taniguchi,
P. van der Werf,
A. Endo
Abstract:
We present a feasibility study for the high-redshift galaxy part of the Science Verification Campaign with the 220-440 GHz DESHIMA 2.0 integrated superconducting spectrometer on the ASTE telescope. The first version of the DESHIMA 2.0 chip has been recently manufactured and tested in the lab. Based on these realistic performance measurements, we evaluate potential target samples and prospects for…
▽ More
We present a feasibility study for the high-redshift galaxy part of the Science Verification Campaign with the 220-440 GHz DESHIMA 2.0 integrated superconducting spectrometer on the ASTE telescope. The first version of the DESHIMA 2.0 chip has been recently manufactured and tested in the lab. Based on these realistic performance measurements, we evaluate potential target samples and prospects for detecting the [CII] and CO emission lines. The planned observations comprise two distinct, but complementary objectives: (1) acquiring spectroscopic redshifts for dusty galaxies selected in far-infrared/mm-wave continuum surveys; (2) multi-line observations to infer physical conditions in dusty galaxies.
△ Less
Submitted 14 January, 2022; v1 submitted 9 November, 2021;
originally announced November 2021.
-
DESHIMA 2.0: development of an integrated superconducting spectrometer for science-grade astronomical observations
Authors:
Akio Taniguchi,
Tom J. L. C. Bakx,
Jochem J. A. Baselmans,
Robert Huiting,
Kenichi Karatsu,
Nuria Llombart,
Matus Rybak,
Tatsuya Takekoshi,
Yoichi Tamura,
Hiroki Akamatsu,
Stefanie Brackenhoff,
Juan Bueno,
Bruno T. Buijtendorp,
Shahab Dabironezare,
Anne-Kee Doing,
Yasunori Fujii,
Kazuyuki Fujita,
Matthijs Gouwerok,
Sebastian Hähnle,
Tsuyoshi Ishida,
Shun Ishii,
Ryohei Kawabe,
Tetsu Kitayama,
Kotaro Kohno,
Akira Kouchi
, et al. (10 additional authors not shown)
Abstract:
Integrated superconducting spectrometer (ISS) technology will enable ultra-wideband, integral-field spectroscopy for (sub)millimeter-wave astronomy, in particular, for uncovering the dust-obscured cosmic star formation and galaxy evolution over cosmic time. Here we present the development of DESHIMA 2.0, an ISS for ultra-wideband spectroscopy toward high-redshift galaxies. DESHIMA 2.0 is designed…
▽ More
Integrated superconducting spectrometer (ISS) technology will enable ultra-wideband, integral-field spectroscopy for (sub)millimeter-wave astronomy, in particular, for uncovering the dust-obscured cosmic star formation and galaxy evolution over cosmic time. Here we present the development of DESHIMA 2.0, an ISS for ultra-wideband spectroscopy toward high-redshift galaxies. DESHIMA 2.0 is designed to observe the 220-440 GHz band in a single shot, corresponding to a redshift range of $z$=3.3-7.6 for the ionized carbon emission ([C II] 158 $μ$m). The first-light experiment of DESHIMA 1.0, using the 332-377 GHz band, has shown an excellent agreement among the on-sky measurements, the lab measurements, and the design. As a successor to DESHIMA 1.0, we plan the commissioning and the scientific observation campaign of DESHIMA 2.0 on the ASTE 10-m telescope in 2023. Ongoing upgrades for the full octave-bandwidth system include the wideband 347-channel chip design and the wideband quasi-optical system. For efficient measurements, we also develop the observation strategy using the mechanical fast sky-position chopper and the sky-noise removal technique based on a novel data-scientific approach. In the paper, we show the recent status of the upgrades and the plans for the scientific observation campaign.
△ Less
Submitted 4 October, 2022; v1 submitted 27 October, 2021;
originally announced October 2021.
-
Hydrogenated Amorphous Silicon Carbide: A Low-loss Deposited Dielectric for Microwave to Submillimeter Wave Superconducting Circuits
Authors:
B. T. Buijtendorp,
S. Vollebregt,
K. Karatsu,
D. J. Thoen,
V. Murugesan,
K. Kouwenhoven,
S. Hähnle,
J. J. A. Baselmans,
A. Endo
Abstract:
Low-loss deposited dielectrics will benefit superconducting devices such as integrated superconducting spectrometers, superconducting qubits and kinetic inductance parametric amplifiers. Compared with planar structures, multi-layer structures such as microstrips are more compact and eliminate radiation loss at high frequencies. Multi-layer structures are most easily fabricated with deposited diele…
▽ More
Low-loss deposited dielectrics will benefit superconducting devices such as integrated superconducting spectrometers, superconducting qubits and kinetic inductance parametric amplifiers. Compared with planar structures, multi-layer structures such as microstrips are more compact and eliminate radiation loss at high frequencies. Multi-layer structures are most easily fabricated with deposited dielectrics, which typically exhibit higher dielectric loss than crystalline dielectrics. We measured the sub-kelvin and low-power microwave and mm-submm wave dielectric loss of hydrogenated amorphous silicon carbide (a-SiC:H), using a superconducting chip with NbTiN/a-SiC:H/NbTiN microstrip resonators. We deposited the a-SiC:H by plasma-enhanced chemical vapor deposition at a substrate temperature of 400°C. The a-SiC:H has a mm-submm loss tangent ranging from $0.80 \pm 0.01 \times 10^{-4}$ to $1.43 \pm 0.04 \times 10^{-4}$ in the range of 270 to 385 GHz. The microwave loss tangent is $3.2 \pm 0.2 \times 10^{-5}$. These are the lowest low-power sub-kelvin loss tangents that have been reported for microstrip resonators at mm-submm and microwave frequencies. We observe that the loss tangent increases with frequency. The a-SiC:H films are free of blisters and have low stress: $-$20 MPa compressive at 200 nm thickness to 60 MPa tensile at 1000 nm thickness.
△ Less
Submitted 7 October, 2021;
originally announced October 2021.
-
Terahertz Band-Pass Filters for Wideband Superconducting On-chip Filter-bank Spectrometers
Authors:
Alejandro Pascual Laguna,
Kenichi Karatsu,
David J. Thoen,
Vignesh Murugesan,
Bruno T. Buijtendorp,
Akira Endo,
Jochem J. A. Baselmans
Abstract:
A superconducting microstrip half-wavelength resonator is proposed as a suitable band-pass filter for broadband moderate spectral resolution spectroscopy for terahertz (THz) astronomy. The proposed filter geometry has a free spectral range of an octave of bandwidth without introducing spurious resonances, reaches a high coupling efficiency in the pass-band and shows very high rejection in the stop…
▽ More
A superconducting microstrip half-wavelength resonator is proposed as a suitable band-pass filter for broadband moderate spectral resolution spectroscopy for terahertz (THz) astronomy. The proposed filter geometry has a free spectral range of an octave of bandwidth without introducing spurious resonances, reaches a high coupling efficiency in the pass-band and shows very high rejection in the stop-band to minimize reflections and cross-talk with other filters. A spectrally sparse prototype filter-bank in the band 300-400 GHz has been developed employing these filters as well as an equivalent circuit model to anticipate systematic errors. The fabricated chip has been characterized in terms of frequency response, reporting an average peak coupling efficiency of 27% with an average spectral resolution of 940.
△ Less
Submitted 22 September, 2021;
originally announced September 2021.
-
Large format imaging spectrograph for the Large Submillimeter Telescope (LST)
Authors:
K. Kohno,
R. Kawabe,
Y. Tamura,
A. Endo,
J. J. A. Baselmans,
K. Karatsu,
A. K. Inoue,
K. Moriwaki,
N. H. Hayatsu,
N. Yoshida,
Y. Yoshimura,
B. Hatsukade,
H. Umehata,
T. Oshima,
T. Takekoshi,
A. Taniguchi,
P. D. Klaassen,
T. Mroczkowski,
C. Cicone,
F. Bertoldi,
H. Dannerbauer,
T. Tosaki
Abstract:
We present a conceptual study of a large format imaging spectrograph for the Large Submillimeter Telescope (LST) and the Atacama Large Aperture Submillimeter Telescope (AtLAST). Recent observations of high-redshift galaxies indicate the onset of earliest star formation just a few 100 million years after the Big Bang (i.e., z = 12--15), and LST/AtLAST will provide a unique pathway to uncover spectr…
▽ More
We present a conceptual study of a large format imaging spectrograph for the Large Submillimeter Telescope (LST) and the Atacama Large Aperture Submillimeter Telescope (AtLAST). Recent observations of high-redshift galaxies indicate the onset of earliest star formation just a few 100 million years after the Big Bang (i.e., z = 12--15), and LST/AtLAST will provide a unique pathway to uncover spectroscopically-identified first forming galaxies in the pre-reionization era, once it will be equipped with a large format imaging spectrograph. We propose a 3-band (200, 255, and 350 GHz), medium resolution (R = 2,000) imaging spectrograph with 1.5 M detectors in total based on the KATANA concept (Karatsu et al. 2019), which exploits technologies of the integrated superconducting spectrometer (ISS) and a large-format imaging array. A 1-deg2 drilling survey (3,500 hr) will capture a large number of [O III] 88 um (and [C II] 158 um) emitters at z = 8--9, and constrain [O III] luminosity functions at z > 12.
△ Less
Submitted 16 February, 2021;
originally announced February 2021.
-
TiEMPO: Open-source time-dependent end-to-end model for simulating ground-based submillimeter astronomical observations
Authors:
Esmee Huijten,
Yannick Roelvink,
Stefanie A. Brackenhoff,
Akio Taniguchi,
Tom J. L. C. Bakx,
Kaushal B. Marthi,
Stan Zaalberg,
Jochem J. A. Baselmans,
Kah Wuy Chin,
Robert Huiting,
Kenichi Karatsu,
Alejandro Pascual Laguna,
Yoichi Tamura,
Tatsuya Takekoshi,
Stephen Yates,
Maarten van Hoven,
Akira Endo
Abstract:
The next technological breakthrough in millimeter-submillimeter astronomy is 3D imaging spectrometry with wide instantaneous spectral bandwidths and wide fields of view. The total optimization of the focal-plane instrument, the telescope, the observing strategy, and the signal-processing software must enable efficient removal of foreground emission from the Earth's atmosphere, which is time-depend…
▽ More
The next technological breakthrough in millimeter-submillimeter astronomy is 3D imaging spectrometry with wide instantaneous spectral bandwidths and wide fields of view. The total optimization of the focal-plane instrument, the telescope, the observing strategy, and the signal-processing software must enable efficient removal of foreground emission from the Earth's atmosphere, which is time-dependent and highly nonlinear in frequency. Here we present TiEMPO: Time-Dependent End-to-End Model for Post-process Optimization of the DESHIMA Spectrometer. TiEMPO utilizes a dynamical model of the atmosphere and parametrized models of the astronomical source, the telescope, the instrument, and the detector. The output of TiEMPO is a time-stream of sky brightness temperature and detected power, which can be analyzed by standard signal-processing software. We first compare TiEMPO simulations with an on-sky measurement by the wideband DESHIMA spectrometer and find good agreement in the noise power spectral density and sensitivity. We then use TiEMPO to simulate the detection of a line emission spectrum of a high-redshift galaxy using the DESHIMA 2.0 spectrometer in development. The TiEMPO model is open source. Its modular and parametrized design enables users to adapt it to design and optimize the end-to-end performance of spectroscopic and photometric instruments on existing and future telescopes.
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
Characterization of low-loss hydrogenated amorphous silicon films for superconducting resonators
Authors:
Bruno T. Buijtendorp,
Juan Bueno,
David J. Thoen,
Vignesh Murugesan,
Paolo M. Sberna,
Jochem J. A. Baselmans,
Sten Vollebregt,
Akira Endo
Abstract:
Superconducting resonators used in millimeter-submillimeter astronomy would greatly benefit from deposited dielectrics with a small dielectric loss. We deposited hydrogenated amorphous silicon films using plasma-enhanced chemical vapor deposition, at substrate temperatures of 100°C, 250°C and 350°C. The measured void volume fraction, hydrogen content, microstructure parameter, and bond-angle disor…
▽ More
Superconducting resonators used in millimeter-submillimeter astronomy would greatly benefit from deposited dielectrics with a small dielectric loss. We deposited hydrogenated amorphous silicon films using plasma-enhanced chemical vapor deposition, at substrate temperatures of 100°C, 250°C and 350°C. The measured void volume fraction, hydrogen content, microstructure parameter, and bond-angle disorder are negatively correlated with the substrate temperature. All three films have a loss tangent below $10^{-5}$ for a resonator energy of $10^5$ photons, at 120 mK and 4-7 GHz. This makes these films promising for microwave kinetic inductance detectors and on-chip millimeter-submilimeter filters.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
Simulating the radiation loss of superconducting submillimeter wave filters and transmission lines using Sonnet EM
Authors:
Akira Endo,
Alejandro Pascual Laguna,
Sebastian Hähnle,
Kenichi Karatsu,
David J. Thoen,
Vignesh Murugesan,
Jochem J. A. Baselmans
Abstract:
Superconducting resonators and transmission lines are fundamental building blocks of integrated circuits for millimeter-submillimeter astronomy. Accurate simulation of radiation loss from the circuit is crucial for the design of these circuits because radiation loss increases with frequency, and can thereby deteriorate the system performance. Here we show a stratification for a 2.5-dimensional met…
▽ More
Superconducting resonators and transmission lines are fundamental building blocks of integrated circuits for millimeter-submillimeter astronomy. Accurate simulation of radiation loss from the circuit is crucial for the design of these circuits because radiation loss increases with frequency, and can thereby deteriorate the system performance. Here we show a stratification for a 2.5-dimensional method-of-moment simulator Sonnet EM that enables accurate simulations of the radiative resonant behavior of submillimeter-wave coplanar resonators and straight coplanar waveguides (CPWs). The Sonnet simulation agrees well with the measurement of the transmission through a coplanar resonant filter at 374.6 GHz. Our Sonnet stratification utilizes artificial lossy layers below the lossless substrate to absorb the radiation, and we use co-calibrated internal ports for de-embedding. With this type of stratification, Sonnet can be used to model superconducting millimeter-submillimeter wave circuits even when radiation loss is a potential concern.
△ Less
Submitted 13 December, 2020;
originally announced December 2020.
-
DESHIMA on ASTE: On-sky Responsivity Calibration of the Integrated Superconducting Spectrometer
Authors:
Tatsuya Takekoshi,
Kenichi Karatsu,
Junya Suzuki,
Yoichi Tamura,
Tai Oshima,
Akio Taniguchi,
Shin'ichiro Asayama,
Tom J. L. C. Bakx,
Jochem J. A. Baselmans,
Sjoerd Bosma,
Juan Bueno,
Kah Wuy Chin,
Yasunori Fujii,
Kazuyuki Fujita,
Robert Huiting,
Soh Ikarashi,
Tsuyoshi Ishida,
Shun Ishii,
Ryohei Kawabe,
Teun M. Klapwijk,
Kotaro Kohno,
Akira Kouchi,
Nuria Llombart,
Jun Maekawa,
Vignesh Murugesan
, et al. (14 additional authors not shown)
Abstract:
We are developing an ultra-wideband spectroscopic instrument, DESHIMA (DEep Spectroscopic HIgh-redshift MApper), based on the technologies of an on-chip filter-bank and Microwave Kinetic Inductance Detector (MKID) to investigate dusty star-burst galaxies in the distant universe at millimeter and submillimeter wavelength. An on-site experiment of DESHIMA was performed using the ASTE 10-m telescope.…
▽ More
We are developing an ultra-wideband spectroscopic instrument, DESHIMA (DEep Spectroscopic HIgh-redshift MApper), based on the technologies of an on-chip filter-bank and Microwave Kinetic Inductance Detector (MKID) to investigate dusty star-burst galaxies in the distant universe at millimeter and submillimeter wavelength. An on-site experiment of DESHIMA was performed using the ASTE 10-m telescope. We established a responsivity model that converts frequency responses of the MKIDs to line-of-sight brightness temperature. We estimated two parameters of the responsivity model using a set of skydip data taken under various precipitable water vapor (PWV, 0.4-3.0 mm) conditions for each MKID. The line-of-sight brightness temperature of sky is estimated using an atmospheric transmission model and the PWVs. As a result, we obtain an average temperature calibration uncertainty of $1σ=4$%, which is smaller than other photometric biases. In addition, the average forward efficiency of 0.88 in our responsivity model is consistent with the value expected from the geometrical support structure of the telescope. We also estimate line-of-sight PWVs of each skydip observation using the frequency response of MKIDs, and confirm the consistency with PWVs reported by the Atacama Large Millimeter/submillimeter Array.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Microwave Spectro-Polarimetry of Matter and Radiation across Space and Time
Authors:
Jacques Delabrouille,
Maximilian H. Abitbol,
Nabila Aghanim,
Yacine Ali-Haimoud,
David Alonso,
Marcelo Alvarez,
Anthony J. Banday,
James G. Bartlett,
Jochem Baselmans,
Kaustuv Basu,
Nicholas Battaglia,
Jose Ramon Bermejo Climent,
Jose L. Bernal,
Matthieu Béthermin,
Boris Bolliet,
Matteo Bonato,
François R. Bouchet,
Patrick C. Breysse,
Carlo Burigana,
Zhen-Yi Cai,
Jens Chluba,
Eugene Churazov,
Helmut Dannerbauer,
Paolo De Bernardis,
Gianfranco De Zotti
, et al. (55 additional authors not shown)
Abstract:
This paper discusses the science case for a sensitive spectro-polarimetric survey of the microwave sky. Such a survey would provide a tomographic and dynamic census of the three-dimensional distribution of hot gas, velocity flows, early metals, dust, and mass distribution in the entire Hubble volume, exploit CMB temperature and polarisation anisotropies down to fundamental limits, and track energy…
▽ More
This paper discusses the science case for a sensitive spectro-polarimetric survey of the microwave sky. Such a survey would provide a tomographic and dynamic census of the three-dimensional distribution of hot gas, velocity flows, early metals, dust, and mass distribution in the entire Hubble volume, exploit CMB temperature and polarisation anisotropies down to fundamental limits, and track energy injection and absorption into the radiation background across cosmic times by measuring spectral distortions of the CMB blackbody emission. In addition to its exceptional capability for cosmology and fundamental physics, such a survey would provide an unprecedented view of microwave emissions at sub-arcminute to few-arcminute angular resolution in hundreds of frequency channels, a data set that would be of immense legacy value for many branches of astrophysics. We propose that this survey be carried-out with a large space mission featuring a broad-band polarised imager and a moderate resolution spectro-imager at the focus of a 3.5m aperture telescope actively cooled to about 8K, complemented with absolutely-calibrated Fourier Transform Spectrometer modules observing at degree-scale angular resolution in the 10-2000 GHz frequency range. We propose two observing modes: a survey mode to map the entire sky as well as a few selected wide fields, and an observatory mode for deeper observations of regions of specific interest.
△ Less
Submitted 4 September, 2019;
originally announced September 2019.
-
First light demonstration of the integrated superconducting spectrometer
Authors:
Akira Endo,
Kenichi Karatsu,
Yoichi Tamura,
Tai Oshima,
Akio Taniguchi,
Tatsuya Takekoshi,
Shin'ichiro Asayama,
Tom J. L. C. Bakx,
Sjoerd Bosma,
Juan Bueno,
Kah Wuy Chin,
Yasunori Fujii,
Kazuyuki Fujita,
Robert Huiting,
Soh Ikarashi,
Tsuyoshi Ishida,
Shun Ishii,
Ryohei Kawabe,
Teun M. Klapwijk,
Kotaro Kohno,
Akira Kouchi,
Nuria Llombart,
Jun Maekawa,
Vignesh Murugesan,
Shunichi Nakatsubo
, et al. (14 additional authors not shown)
Abstract:
Ultra-wideband 3D imaging spectrometry in the millimeter-submillimeter (mm-submm) band is an essential tool for uncovering the dust-enshrouded portion of the cosmic history of star formation and galaxy evolution. However, it is challenging to scale up conventional coherent heterodyne receivers or free-space diffraction techniques to sufficient bandwidths ($\geq$1 octave) and numbers of spatial pix…
▽ More
Ultra-wideband 3D imaging spectrometry in the millimeter-submillimeter (mm-submm) band is an essential tool for uncovering the dust-enshrouded portion of the cosmic history of star formation and galaxy evolution. However, it is challenging to scale up conventional coherent heterodyne receivers or free-space diffraction techniques to sufficient bandwidths ($\geq$1 octave) and numbers of spatial pixels (>$10^2$). Here we present the design and first astronomical spectra of an intrinsically scalable, integrated superconducting spectrometer, which covers 332-377 GHz with a spectral resolution of $F/ΔF \sim 380$. It combines the multiplexing advantage of microwave kinetic inductance detectors (MKIDs) with planar superconducting filters for dispersing the signal in a single, small superconducting integrated circuit. We demonstrate the two key applications for an instrument of this type: as an efficient redshift machine, and as a fast multi-line spectral mapper of extended areas. The line detection sensitivity is in excellent agreement with the instrument design and laboratory performance, reaching the atmospheric foreground photon noise limit on sky. The design can be scaled to bandwidths in excess of an octave, spectral resolution up to a few thousand and frequencies up to $\sim$1.1 THz. The miniature chip footprint of a few $\mathrm{cm^2}$ allows for compact multi-pixel spectral imagers, which would enable spectroscopic direct imaging and large volume spectroscopic surveys that are several orders of magnitude faster than what is currently possible.
△ Less
Submitted 18 September, 2019; v1 submitted 24 June, 2019;
originally announced June 2019.
-
Wideband on-chip terahertz spectrometer based on a superconducting filterbank
Authors:
Akira Endo,
Kenichi Karatsu,
Alejandro Pascual Laguna,
Behnam Mirzaei,
Robert Huiting,
David J. Thoen,
Vignesh Murugesan,
Stephen J. C. Yates,
Juan Bueno,
Nuri van Marrewijk,
Sjoerd Bosma,
Ozan Yurduseven,
Nuria Llombart,
Junya Suzuki,
Masato Naruse,
Pieter J. de Visser,
Paul P. van der Werf,
Teun M. Klapwijk,
Jochem J. A. Baselmans
Abstract:
Terahertz spectrometers with a wide instantaneous frequency coverage for passive remote sensing are enormously attractive for many terahertz applications, such as astronomy, atmospheric science and security. Here we demonstrate a wide-band terahertz spectrometer based on a single superconducting chip. The chip consists of an antenna coupled to a transmission line filterbank, with a microwave kinet…
▽ More
Terahertz spectrometers with a wide instantaneous frequency coverage for passive remote sensing are enormously attractive for many terahertz applications, such as astronomy, atmospheric science and security. Here we demonstrate a wide-band terahertz spectrometer based on a single superconducting chip. The chip consists of an antenna coupled to a transmission line filterbank, with a microwave kinetic inductance detector behind each filter. Using frequency division multiplexing, all detectors are read-out simultaneously creating a wide-band spectrometer with an instantaneous bandwidth of 45 GHz centered around 350 GHz. The spectrometer has a spectral resolution of $F/ΔF=380$ and reaches photon-noise limited sensitivity. We discuss the chip design and fabrication, as well as the system integration and testing. We confirm full system operation by the detection of an emission line spectrum of methanol gas. The proposed concept allows for spectroscopic radiation detection over large bandwidths and resolutions up to $F/ΔF\sim1000$, all using a chip area of a few $\mathrm{cm^2}$. This will allow the construction of medium resolution imaging spectrometers with unprecedented speed and sensitivity.
△ Less
Submitted 21 June, 2019; v1 submitted 21 January, 2019;
originally announced January 2019.
-
Mitigation of Cosmic Ray Effect on Microwave Kinetic Inductance Detector Arrays
Authors:
K. Karatsu,
A. Endo,
J. Bueno,
P. J. de Visser,
R. Barends,
D. J. Thoen,
V. Murugesan,
N. Tomita,
J. J. A. Baselmans
Abstract:
For space observatories, the glitches caused by high energy phonons created by the interaction of cosmic ray particles with the detector substrate lead to dead time during observation. Mitigating the impact of cosmic rays is therefore an important requirement for detectors to be used in future space missions. In order to investigate possible solutions, we carry out a systematic study by testing fo…
▽ More
For space observatories, the glitches caused by high energy phonons created by the interaction of cosmic ray particles with the detector substrate lead to dead time during observation. Mitigating the impact of cosmic rays is therefore an important requirement for detectors to be used in future space missions. In order to investigate possible solutions, we carry out a systematic study by testing four large arrays of Microwave Kinetic Inductance Detectors (MKIDs), each consisting of $\sim$960 pixels and fabricated on monolithic 55 mm $\times$ 55 mm $\times$ 0.35 mm Si substrates. We compare the response to cosmic ray interactions in our laboratory for different detector arrays: A standard array with only the MKID array as reference; an array with a low $T_c$ superconducting film as phonon absorber on the opposite side of the substrate; and arrays with MKIDs on membranes. The idea is that the low $T_c$ layer down-converts the phonon energy to values below the pair breaking threshold of the MKIDs, and the membranes isolate the sensitive part of the MKIDs from phonons created in the substrate. We find that the dead time can be reduced up to a factor of 40 when compared to the reference array. Simulations show that the dead time can be reduced to below 1 % for the tested detector arrays when operated in a spacecraft in an L2 or a similar far-Earth orbit. The technique described here is also applicable and important for large superconducting qubit arrays for future quantum computers.
△ Less
Submitted 10 January, 2019; v1 submitted 8 January, 2019;
originally announced January 2019.
-
A kilo-pixel imaging system for future space based far-infrared observatories using microwave kinetic inductance detectors
Authors:
J. J. A. Baselmans,
J. Bueno,
S. J. C. Yates,
O. Yurduseven,
N. Llombart,
K. Karatsu,
A. M. Baryshev,
L. Ferrari,
A. Endo,
D. J. Thoen,
P. J. de Visser,
R. M. J. Janssen,
V. Murugesan,
E. F. C. Driessen,
G. Coiffard,
J. Martin-Pintado,
P. Hargrave,
M. Griffin
Abstract:
Future astrophysics and cosmic microwave background space missions operating in the far-infrared to millimetre part of the spectrum will require very large arrays of ultra-sensitive detectors in combination with high multiplexing factors and efficient low-noise and low-power readout systems. We have developed a demonstrator system suitable for such applications. The system combines a 961 pixel ima…
▽ More
Future astrophysics and cosmic microwave background space missions operating in the far-infrared to millimetre part of the spectrum will require very large arrays of ultra-sensitive detectors in combination with high multiplexing factors and efficient low-noise and low-power readout systems. We have developed a demonstrator system suitable for such applications. The system combines a 961 pixel imaging array based upon Microwave Kinetic Inductance Detectors (MKIDs) with a readout system capable of reading out all pixels simultaneously with only one readout cable pair and a single cryogenic amplifier. We evaluate, in a representative environment, the system performance in terms of sensitivity, dynamic range, optical efficiency, cosmic ray rejection, pixel-pixel crosstalk and overall yield at at an observation centre frequency of 850 GHz and 20% fractional bandwidth. The overall system has an excellent sensitivity, with an average detector sensitivity NEPdet=3x10^-19 W/rt(Hz) measured using a thermal calibration source. At a loading power per pixel of 50fW we demonstrate white, photon noise limited detector noise down to 300 mHz. The dynamic range would allow the detection of 1 Jy bright sources within the field of view without tuning the readout of the detectors. The expected dead time due to cosmic ray interactions, when operated in an L2 or a similar far-Earth orbit, is found to be <4%. Additionally, the achieved pixel yield is 83% and the crosstalk between the pixels is <-30dB. This demonstrates that MKID technology can provide multiplexing ratios on the order of a 1000 with state-of-the-art single pixel performance, and that the technology is now mature enough to be considered for future space based observatories and experiments.
△ Less
Submitted 1 March, 2017; v1 submitted 7 September, 2016;
originally announced September 2016.
-
Superconducting NbTiN Thin Films with Highly Uniform Properties over a 100 mm diameter Wafer
Authors:
D. J. Thoen,
B. G. C. Bos,
E. A. F. Haalebos,
T. M. Klapwijk,
J. J. A. Baselmans,
A. Endo
Abstract:
Uniformity in thickness and electronic properties of superconducting niobium titanium nitride (NbTiN) thin films is a critical issue for upscaling superconducting electronics, such as microwave kinetic inductance detectors for submillimeter wave astronomy. In this article we make an experimental comparison between the uniformity of NbTiN thin films produced by two DC magnetron sputtering systems w…
▽ More
Uniformity in thickness and electronic properties of superconducting niobium titanium nitride (NbTiN) thin films is a critical issue for upscaling superconducting electronics, such as microwave kinetic inductance detectors for submillimeter wave astronomy. In this article we make an experimental comparison between the uniformity of NbTiN thin films produced by two DC magnetron sputtering systems with vastly different target sizes: the Nordiko 2000 equipped with a circular 100mm diameter target, and the Evatec LLS801 with a rectangular target of 127 mm x 444.5 mm. In addition to the films deposited staticly in both systems, we have also deposited films in the LLS801 while shuttling the substrate in front of the target, with the aim of further enhancing the uniformity. Among these three setups, the LLS801 system with substrate shuttling has yielded the highest uniformity in film thickness (+/-2%), effective resistivity (decreasing by 5% from center to edge), and superconducting critical temperature (T_c = 15.0 K - 15.3 K) over a 100 mm diameter wafer. However, the shuttling appears to increase the resistivity by almost a factor of 2 compared to static deposition. Surface SEM inspections suggest that the shuttling could have induced a different mode of microstructural film growth.
△ Less
Submitted 22 November, 2016; v1 submitted 6 September, 2016;
originally announced September 2016.
-
Reactive magnetron sputter deposition of superconducting niobium titanium nitride thin films with different target sizes
Authors:
B. G. C. Bos,
D. J. Thoen,
E. A. F. Haalebos,
P. M. L. Gimbel,
T. M. Klapwijk,
J. J. A. Baselmans,
A. Endo
Abstract:
The superconducting critical temperature (Tc > 15K) of niobium titanium nitride (NbTiN) thin films allows for low-loss circuits up to 1.1 THz, enabling on-chip spectroscopy and multi-pixel imaging with advanced detectors. The drive for large scale detector microchips is demanding NbTiN films with uniform properties over an increasingly larger area. This article provides an experimental comparison…
▽ More
The superconducting critical temperature (Tc > 15K) of niobium titanium nitride (NbTiN) thin films allows for low-loss circuits up to 1.1 THz, enabling on-chip spectroscopy and multi-pixel imaging with advanced detectors. The drive for large scale detector microchips is demanding NbTiN films with uniform properties over an increasingly larger area. This article provides an experimental comparison between two reactive d.c. sputter systems with different target sizes: a small target (100mm diameter) and a large target (127 mm x 444.5 mm). This article focuses on maximizing the Tc of the films and the accompanying I-V characteristics of the sputter plasma, and we find that both systems are capable of depositing films with Tc > 15 K. The resulting film uniformity is presented in a second manuscript in this volume. We find that these films are deposited within the transition from metallic to compound sputtering, at the point where target nitridation most strongly depends on nitrogen flow. Key in the deposition optimization is to increase the system's pumping speed and gas flows to counteract the hysteretic effects induced by the target size. Using the I-V characteristics as a guide proves to be an effective way to optimize a reactive sputter system, for it can show whether the optimal deposition regime is hysteresis-free and accessible.
△ Less
Submitted 22 November, 2016; v1 submitted 5 September, 2016;
originally announced September 2016.
-
Observations and modelling of CO and [CI] in disks. First detections of [CI] and constraints on the carbon abundance
Authors:
M. Kama,
S. Bruderer,
M. Carney,
M. Hogerheijde,
E. F. van Dishoeck,
D. Fedele,
A. Baryshev,
W. Boland,
R. Güsten,
A. Aikutalp,
Y. Choi,
A. Endo,
W. Frieswijk,
A. Karska,
P. Klaassen,
E. Koumpia,
L. Kristensen,
S. Leurini,
Z. Nagy,
J. -P. Perez Beaupuits,
C. Risacher,
N. van der Marel,
T. A. van Kempen,
R. J. van Weeren,
F. Wyrowski
, et al. (1 additional authors not shown)
Abstract:
The gas-solid budget of carbon in protoplanetary disks is related to the composition of the cores and atmospheres of the planets forming in them. The key gas-phase carbon carriers CO, C$^{0}$ and C$^{+}$ can now be observed in disks. The gas-phase carbon abundance in disks has not yet been well characterized, we aim to obtain new constraints on the [C]/[H] ratio in a sample of disks, and to get an…
▽ More
The gas-solid budget of carbon in protoplanetary disks is related to the composition of the cores and atmospheres of the planets forming in them. The key gas-phase carbon carriers CO, C$^{0}$ and C$^{+}$ can now be observed in disks. The gas-phase carbon abundance in disks has not yet been well characterized, we aim to obtain new constraints on the [C]/[H] ratio in a sample of disks, and to get an overview of the strength of [CI] and warm CO emission.
We carried out a survey of the CO$\,6$--$5$ and [CI]$\,1$--$0$ and $2$--$1$ lines towards $37$ disks with APEX, and supplemented it with [CII] data from the literature. The data are interpreted using a grid of models produced with the DALI code. We also investigate how well the gas-phase carbon abundance can be determined in light of parameter uncertainties.
The CO$\,6$--$5$ line is detected in $13$ out of $33$ sources, the [CI]$\,1$--$0$ in $6$ out of $12$, and the [CI]$\,2$--$1$ in $1$ out of $33$. With deep integrations, the first unambiguous detections of [CI]~$1$--$0$ in disks are obtained, in TW~Hya and HD~100546.
Gas-phase carbon abundance reductions of a factor $5$--$10$ or more can be identified robustly based on CO and [CI] detections. The atomic carbon detection in TW~Hya confirms a factor $100$ reduction of [C]/[H]$_{\rm gas}$ in that disk, while the data are consistent with an ISM-like carbon abundance for HD~100546. In addition, BP~Tau, T~Cha, HD~139614, HD~141569, and HD~100453 are either carbon-depleted or gas-poor disks. The low [CI]~$2$--$1$ detection rates in the survey mostly reflect insufficient sensitivity to detect T~Tauri disks. The Herbig~Ae/Be disks with CO and [CII] upper limits below the models are debris disk like systems. A roughly order of magnitude increase in sensitivity compared to our survey is required to obtain useful constraints on the gas-phase [C]/[H] ratio in most of the targeted systems.
△ Less
Submitted 7 January, 2016;
originally announced January 2016.
-
Outflow forces in intermediate mass star formation
Authors:
T. A. van Kempen,
M. R. Hogerheijde,
E. F. van Dishoeck,
L. E. Kristensen,
A. Belloche,
P. D. Klaassen,
S. Leurini,
I. San Jose-Garcia,
A. Aykutalp,
Y. Choi,
A. Endo,
W. Frieswijk,
D. Harsono,
A. Karska,
E. Koumpia,
N. van der Marel,
Z. Nagy,
J. P. Perez-Beaupuits,
C. Risacher,
R. J. van Weeren,
F. Wyrowski,
U. A. Yildiz,
R. Guesten,
W. Boland,
A. Baryshev
Abstract:
Intermediate mass protostarsprovide a bridge between theories of low- and high-mass star formation. Emerging molecular outflows can be used to determine the influence of fragmentation and multiplicity on protostellar evolution through the correlation of outflow forces of intermediate mass protostars with the luminosity. The aim of this paper is to derive outflow forces from outflows of six interme…
▽ More
Intermediate mass protostarsprovide a bridge between theories of low- and high-mass star formation. Emerging molecular outflows can be used to determine the influence of fragmentation and multiplicity on protostellar evolution through the correlation of outflow forces of intermediate mass protostars with the luminosity. The aim of this paper is to derive outflow forces from outflows of six intermediate mass protostellar regions and validate the apparent correlation between total luminosity and outflow force seen in earlier work, as well as remove uncertainties caused by different methodology. By comparing CO 6--5 observations obtained with APEX with non-LTE radiative transfer model predictions, optical depths, temperatures, densities of the gas of the molecular outflows are derived. Outflow forces, dynamical timescales and kinetic luminosities are subsequently calculated. Outflow parameters, including the forces, were derived for all sources. Temperatures in excess of 50 K were found for all flows, in line with recent low-mass results. However, comparison with other studies could not corroborate conclusions from earlier work on intermediate mass protostars which hypothesized that fragmentation enhances outflow forces in clustered intermediate mass star formation. Any enhancement in comparison with the classical relation between outflow force and luminosity can be attributed the use of a higher excitation line and improvement in methods; They are in line with results from low-mass protostars using similar techniques. The role of fragmentation on outflows is an important ingredient to understand clustered star formation and the link between low and high-mass star formation. However, detailed information on spatial scales of a few 100 AU, covering all individual members is needed to make the necessary progress.
△ Less
Submitted 10 July, 2015; v1 submitted 7 July, 2015;
originally announced July 2015.
-
APEX-CHAMP+ high-J CO observations of low-mass young stellar objects: IV. Mechanical and radiative feedback
Authors:
Umut A. Yıldız,
Lars E. Kristensen,
Ewine F. van Dishoeck,
Michiel R. Hogerheijde,
Agata Karska,
Arnaud Belloche,
Akira Endo,
Wilfred Frieswijk,
Rolf Güsten,
Tim A. van Kempen,
Silvia Leurini,
Zsofia Nagy,
Juan-Pablo Pérez-Beaupuits,
Christophe Risacher,
Nienke van der Marel,
Reinout J. van Weeren,
Friedrich Wyrowski
Abstract:
During the embedded stage of star formation, bipolar molecular outflows and UV radiation from the protostar are important feedback processes. Our aim is to quantify the feedback, mechanical and radiative, for a large sample of low-mass sources. The outflow activity is compared to radiative feedback in the form of UV heating by the accreting protostar to search for correlations and evolutionary tre…
▽ More
During the embedded stage of star formation, bipolar molecular outflows and UV radiation from the protostar are important feedback processes. Our aim is to quantify the feedback, mechanical and radiative, for a large sample of low-mass sources. The outflow activity is compared to radiative feedback in the form of UV heating by the accreting protostar to search for correlations and evolutionary trends. Large-scale maps of 26 young stellar objects, which are part of the Herschel WISH key program are obtained using the CHAMP+ instrument on the APEX (12CO and 13CO 6-5), and the HARP-B instrument on the JCMT (12CO and 13CO 3-2). Maps are used to determine outflow parameters and envelope models are used to quantify the amount of UV-heated gas and its temperature from 13CO 6-5 observations. All sources in our sample show outflow activity and the outflow force, F_CO, is larger for Class 0 sources than for Class I sources, even if their luminosities are comparable. The outflowing gas typically extends to much greater distances than the power-law envelope and therefore influences the surrounding cloud material directly. Comparison of the CO 6-5 results with Herschel-HIFI H2O and PACS high-J CO lines, both tracing currently shocked gas, shows that the two components are linked, even though the transitions do not probe the same gas. The link does not extend down to CO 3-2. The conclusion is that CO 6-5 depends on the shock characteristics (density and velocity), whereas CO 3-2 is more sensitive to conditions in the surrounding environment (density). The radiative feedback is responsible for increasing the gas temperature by a factor of two, up to 30-50 K, on scales of a few thousand AU, particularly along the direction of the outflow. The mass of the UV heated gas exceeds the mass contained in the entrained outflow in the inner ~3000 AU and is therefore at least as important on small scales.
△ Less
Submitted 14 January, 2015;
originally announced January 2015.
-
Performance of Hybrid NbTiN-Al Microwave Kinetic Inductance Detectors as Direct Detectors for Sub-millimeter Astronomy
Authors:
R. M. J. Janssen,
J. J. A. Baselmans,
A. Endo,
L. Ferrari,
S. J. C. Yates,
A. M. Baryshev,
T. M. Klapwijk
Abstract:
In the next decades millimeter and sub-mm astronomy requires large format imaging arrays and broad-band spectrometers to complement the high spatial and spectral resolution of the Atacama Large Millimeter/sub-millimeter Array. The desired sensors for these instruments should have a background limited sensitivity and a high optical efficiency and enable arrays thousands of pixels in size. Hybrid mi…
▽ More
In the next decades millimeter and sub-mm astronomy requires large format imaging arrays and broad-band spectrometers to complement the high spatial and spectral resolution of the Atacama Large Millimeter/sub-millimeter Array. The desired sensors for these instruments should have a background limited sensitivity and a high optical efficiency and enable arrays thousands of pixels in size. Hybrid microwave kinetic inductance detectors consisting of NbTiN and Al have shown to satisfy these requirements. We present the second generation hybrid NbTiN-Al MKIDs, which are photon noise limited in both phase and amplitude readout for loading levels $P_{850GHz} \geq 10$ fW. Thanks to the increased responsivity, the photon noise level achieved in phase allows us to simultaneously read out approximately 8000 pixels using state-of-the-art electronics. In addition, the choice of superconducting materials and the use of a Si lens in combination with a planar antenna gives these resonators the flexibility to operate within the frequency range $0.09 < ν< 1.1$ THz. Given these specifications, hybrid NbTiN-Al MKIDs will enable astronomically usable kilopixel arrays for sub-mm imaging and moderate resolution spectroscopy.
△ Less
Submitted 14 August, 2014;
originally announced August 2014.
-
Two gamma-ray bursts from dusty regions with little molecular gas
Authors:
B. Hatsukade,
K. Ohta,
A. Endo,
K. Nakanishi,
Y. Tamura,
T. Hashimoto,
K. Kohno
Abstract:
Long-duration gamma-ray bursts are associated with the explosions of massive stars and are accordingly expected to reside in star-forming regions with molecular gas (the fuel for star formation). Previous searches for carbon monoxide (CO), a tracer of molecular gas, in burst host galaxies did not detect any emission. Molecules have been detected as absorption in the spectra of gamma-ray burst afte…
▽ More
Long-duration gamma-ray bursts are associated with the explosions of massive stars and are accordingly expected to reside in star-forming regions with molecular gas (the fuel for star formation). Previous searches for carbon monoxide (CO), a tracer of molecular gas, in burst host galaxies did not detect any emission. Molecules have been detected as absorption in the spectra of gamma-ray burst afterglows, and the molecular gas is similar to the translucent or diffuse molecular clouds of the Milky Way. Absorption lines probe the interstellar medium only along the line of sight, so it is not clear whether the molecular gas represents the general properties of the regions where the bursts occur. Here we report spatially resolved observations of CO line emission and millimetre-wavelength continuum emission in two galaxies hosting gamma-ray bursts. The bursts happened in regions rich in dust, but not particularly rich in molecular gas. The ratio of molecular gas to dust (<9-14) is significantly lower than in star-forming regions of the Milky Way and nearby star-forming galaxies, suggesting that much of the dense gas where stars form has been dissipated by other massive stars.
△ Less
Submitted 11 June, 2014;
originally announced June 2014.
-
High optical efficiency and photon noise limited sensitivity of microwave kinetic inductance detectors using phase readout
Authors:
R. M. J. Janssen,
J. J. A. Baselmans,
A. Endo,
L. Ferrari,
S. J. C. Yates,
A. M. Baryshev,
T. M. Klapwijk
Abstract:
We demonstrate photon noise limited performance in both phase and amplitude readout in microwave kinetic inductance detectors (MKIDs) consisting of NbTiN and Al, down to 100 fW of optical power. We simulate the far field beam pattern of the lens-antenna system used to couple radiation into the MKID and derive an aperture efficiency of 75%. This is close to the theoretical maximum of 80% for a sing…
▽ More
We demonstrate photon noise limited performance in both phase and amplitude readout in microwave kinetic inductance detectors (MKIDs) consisting of NbTiN and Al, down to 100 fW of optical power. We simulate the far field beam pattern of the lens-antenna system used to couple radiation into the MKID and derive an aperture efficiency of 75%. This is close to the theoretical maximum of 80% for a single-moded detector. The beam patterns are verified by a detailed analysis of the optical coupling within our measurement setup.
△ Less
Submitted 11 November, 2013;
originally announced November 2013.
-
On-chip filter bank spectroscopy at 600-700 GHz using NbTiN superconducting resonators
Authors:
A. Endo,
C. Sfiligoj,
S. J. C. Yates,
J. J. A. Baselmans,
D. J. Thoen,
S. M. H. Javadzadeh,
P. P. van der Werf,
A. M. Baryshev,
T. M. Klapwijk
Abstract:
We experimentally demonstrate the principle of an on-chip submillimeter wave filter bank spectrometer, using superconducting microresonators as narrow band-separation filters. The filters are made of NbTiN/SiNx/NbTiN microstrip line resonators, which have a resonance frequency in the range of 614-685 GHz---two orders of magnitude higher in frequency than what is currently studied for use in circui…
▽ More
We experimentally demonstrate the principle of an on-chip submillimeter wave filter bank spectrometer, using superconducting microresonators as narrow band-separation filters. The filters are made of NbTiN/SiNx/NbTiN microstrip line resonators, which have a resonance frequency in the range of 614-685 GHz---two orders of magnitude higher in frequency than what is currently studied for use in circuit quantum electrodynamics and photodetectors. The frequency resolution of the filters decreases from 350 to 140 with increasing frequency, most likely limited by dissipation of the resonators.
△ Less
Submitted 21 June, 2013; v1 submitted 28 March, 2013;
originally announced March 2013.
-
Photon noise limited radiation detection with lens-antenna coupled Microwave Kinetic Inductance Detectors
Authors:
S. J. C. Yates,
J. J. A. Baselmans,
A. Endo,
R. M. J. Janssen,
L. Ferrari,
P. Diener,
A. M. Baryshev
Abstract:
Microwave Kinetic Inductance Detectors (MKIDs) have shown great potential for sub-mm instrumentation because of the high scalability of the technology. Here we demonstrate for the first time in the sub-mm band (0.1...2 mm) a photon noise limited performance of a small antenna coupled MKID detector array and we describe the relation between photon noise and MKID intrinsic generation-recombination n…
▽ More
Microwave Kinetic Inductance Detectors (MKIDs) have shown great potential for sub-mm instrumentation because of the high scalability of the technology. Here we demonstrate for the first time in the sub-mm band (0.1...2 mm) a photon noise limited performance of a small antenna coupled MKID detector array and we describe the relation between photon noise and MKID intrinsic generation-recombination noise. Additionally we use the observed photon noise to measure the optical efficiency of detectors to be 0.8+-0.2.
△ Less
Submitted 21 July, 2011;
originally announced July 2011.
-
Integrated Filterbank for DESHIMA: A Submillimeter Imaging Spectrograph Based on Superconducting Resonators
Authors:
A. Endo,
P. van der Werf,
R. M. J. Janssen,
P. J. de Visser,
T. M. Klapwijk,
J. J. A. Baselmans,
L. Ferrari,
A. M. Baryshev,
S. J. C. Yates
Abstract:
An integrated filterbank (IFB) in combination with microwave kinetic inductance detectors (MKIDs), both based on superconducting resonators, could be used to make broadband submillimeter imaging spectrographs that are compact and flexible. In order to investigate the possibility of adopting an IFB configuration for DESHIMA (Delft SRON High-redshift Mapper), we study the basic properties of a copla…
▽ More
An integrated filterbank (IFB) in combination with microwave kinetic inductance detectors (MKIDs), both based on superconducting resonators, could be used to make broadband submillimeter imaging spectrographs that are compact and flexible. In order to investigate the possibility of adopting an IFB configuration for DESHIMA (Delft SRON High-redshift Mapper), we study the basic properties of a coplanar-waveguide-based IFB using electromagnetic simulation. We show that a coupling efficiency greater than 1/2 can be achieved if transmission losses are negligible. We arrive at a practical design for a 9 pixel x 920 color 3 dimensional imaging device that fits on a 4 inch wafer, which instantaneously covers multiple submillimeter telluric windows with a dispersion of f/df = 1000.
△ Less
Submitted 17 July, 2011;
originally announced July 2011.
-
CO Observations of the Host Galaxy of GRB000418 at z = 1.1
Authors:
Bunyo Hatsukade,
Kotaro Kohno,
A. Endo,
Kouichiro Nakanishi,
Kouji Ohta
Abstract:
We performed CO(J=2-1) observations of the host galaxy of GRB000418 at z=1.1181 with the Plateau de Bure Interferometer. Previous studies show that the host galaxy has properties similar to those of an ultraluminous infrared galaxy (ULIRG). The star-formation rate (SFR) of the host galaxy as derived from submillimeter and radio continuum emission is a few 100 M_sun/yr, which is an order of magnitu…
▽ More
We performed CO(J=2-1) observations of the host galaxy of GRB000418 at z=1.1181 with the Plateau de Bure Interferometer. Previous studies show that the host galaxy has properties similar to those of an ultraluminous infrared galaxy (ULIRG). The star-formation rate (SFR) of the host galaxy as derived from submillimeter and radio continuum emission is a few 100 M_sun/yr, which is an order of magnitude greater than the SFR derived from optical line emission. The large discrepancy between the SFRs derived from different observing wavelengths indicates the presence of a bulk of dust-obscured star formation and molecular gas that is enough to sustain the intense star formation. We failed to detect CO emission and derived 2sigma upper limits on the velocity integrated CO(2-1) luminosity of L'CO < 6.9 x 10^9 K km/s/pc^2 and the molecular gas mass of M(H2) < 5.5 x 10^9 M_sun by adopting a velocity width of 300 km/s and a CO-to-H2 conversion factor of alpha_CO = 0.8 M_sun/(K km/s/pc^2), which are standard values for ULIRGs. The lower limit on the ratio of far-infrared luminosity to CO luminosity, a measure of the star-formation efficiency, is higher compared to that of other gamma-ray burst hosts and other galaxy populations, which is consistent with active star formation taking place in this galaxy.
△ Less
Submitted 9 June, 2011;
originally announced June 2011.
-
Number fluctuations of sparse quasiparticles in a superconductor
Authors:
P. J. de Visser,
J. J. A. Baselmans,
P. Diener,
S. J. C. Yates,
A. Endo,
T. M. Klapwijk
Abstract:
We have directly measured quasiparticle number fluctuations in a thin film superconducting Al resonator in thermal equilibrium. The spectrum of these fluctuations provides a measure of both the density and the lifetime of the quasiparticles. We observe that the quasiparticle density decreases exponentially with decreasing temperature, as theoretically predicted, but saturates below 160 mK to 25-55…
▽ More
We have directly measured quasiparticle number fluctuations in a thin film superconducting Al resonator in thermal equilibrium. The spectrum of these fluctuations provides a measure of both the density and the lifetime of the quasiparticles. We observe that the quasiparticle density decreases exponentially with decreasing temperature, as theoretically predicted, but saturates below 160 mK to 25-55 per cubic micron. We show that this saturation is consistent with the measured saturation in the quasiparticle lifetime, which also explains similar observations in qubit decoherence times.
△ Less
Submitted 25 March, 2011; v1 submitted 3 March, 2011;
originally announced March 2011.
-
A dual-band millimeter-wave kinetic inductance camera for the IRAM 30-meter telescope
Authors:
A. Monfardini,
A. Benoit,
A. Bideaud,
L. J. Swenson,
M. Roesch,
F. X. Desert,
S. Doyle,
A. Endo,
A. Cruciani,
P. Ade,
A. M. Baryshev,
J. J. A. Baselmans,
O. Bourrion,
M. Calvo,
P. Camus,
L. Ferrari,
C. Giordano,
C. Hoffmann,
S. Leclercq,
J. F. Macias-Perez,
P. Mauskopf,
K. F. Schuster,
C. Tucker,
C. Vescovi,
S. J. C. Yates
Abstract:
Context. The Neel IRAM KIDs Array (NIKA) is a fully-integrated measurement system based on kinetic inductance detectors (KIDs) currently being developed for millimeter wave astronomy. In a first technical run, NIKA was successfully tested in 2009 at the Institute for Millimetric Radio Astronomy (IRAM) 30-meter telescope at Pico Veleta, Spain. This prototype consisted of a 27-42 pixel camera imagin…
▽ More
Context. The Neel IRAM KIDs Array (NIKA) is a fully-integrated measurement system based on kinetic inductance detectors (KIDs) currently being developed for millimeter wave astronomy. In a first technical run, NIKA was successfully tested in 2009 at the Institute for Millimetric Radio Astronomy (IRAM) 30-meter telescope at Pico Veleta, Spain. This prototype consisted of a 27-42 pixel camera imaging at 150 GHz. Subsequently, an improved system has been developed and tested in October 2010 at the Pico Veleta telescope. The instrument upgrades included dual-band optics allowing simultaneous imaging at 150 GHz and 220 GHz, faster sampling electronics enabling synchronous measurement of up to 112 pixels per measurement band, improved single-pixel sensitivity, and the fabrication of a sky simulator to replicate conditions present at the telescope. Results. The new dual-band NIKA was successfully tested in October 2010, performing in-line with sky simulator predictions. Initially the sources targeted during the 2009 run were re-imaged, verifying the improved system performance. An optical NEP was then calculated to be around 2 \dot 10-16 W/Hz1/2. This improvement in comparison with the 2009 run verifies that NIKA is approaching the target sensitivity for photon-noise limited ground-based detectors. Taking advantage of the larger arrays and increased sensitivity, a number of scientifically-relevant faint and extended objects were then imaged including the Galactic Center SgrB2(FIR1), the radio galaxy Cygnus A and the NGC1068 Seyfert galaxy. These targets were all observed simultaneously in the 150 GHz and 220 GHz atmospheric windows.
△ Less
Submitted 8 February, 2011; v1 submitted 4 February, 2011;
originally announced February 2011.
-
ASTE CO(3--2) Observations of the Southern Barred Spiral Galaxy NGC 986: a Large Gaseous Bar Filled with Dense Molecular Medium
Authors:
K. Kohno,
T. Tosaki,
R. Miura,
K. Muraoka,
T. Sawada,
K. Nakanishi,
N. Kuno,
T. Sakai,
K. Sorai,
K. Kamegai,
K. Tanaka,
T. Okuda,
A. Endo,
B. Hatsukade,
M. Sameshima,
H. Ezawa,
S. Sakamoto,
T. Kamazaki,
J. Cortes,
Y. Tamura,
M. Fukuhara,
D. Iono,
R. Kawabe
Abstract:
We present CO(3-2) emission observations toward the 3'x3' (or 20x20kpc at a distance of 23Mpc) region of the southern barred spiral galaxy NGC 986 using the Atacama Submillimeter Telescope Experiment (ASTE). This effort is a part of our on-going extragalactic CO(3-2) imaging project ADIoS (ASTE Dense gas Imaging of Spiral galaxies). Our CO(3-2) image revealed the presence of a large (the major a…
▽ More
We present CO(3-2) emission observations toward the 3'x3' (or 20x20kpc at a distance of 23Mpc) region of the southern barred spiral galaxy NGC 986 using the Atacama Submillimeter Telescope Experiment (ASTE). This effort is a part of our on-going extragalactic CO(3-2) imaging project ADIoS (ASTE Dense gas Imaging of Spiral galaxies). Our CO(3-2) image revealed the presence of a large (the major axis is 14 kpc in total length) gaseous bar filled with dense molecular medium along the dark lanes observed in optical images. This is the largest ``dense-gas rich bar'' known to date. The dense gas bar discovered in NGC 986 could be a huge reservoir of possible ``fuel'' for future starbursts in the central region, and we suggest that the star formation in the central region of NGC 986 could still be in a growing phase. We found a good spatial coincidence between the overall distributions of dense molecular gas traced by CO(3-2) and the massive star formation depicted by H$α$. The global CO(3-2) luminosity $L'_{\rm CO(3-2)}$ of NGC 986 was determined to be $(5.4 \pm 1.1) \times 10^8$ K km s$^{-1}$ pc$^2$. The CO(3-2)/CO(1-0) integrated intensity ratio was found to be 0.60 +/- 0.13 at a spatial resolution of 44'' or 5 kpc, and a CO(3-2)/CO(2-1) ratio was 0.67 +/- 0.14 at a beam size of ~25'' or ~2.8 kpc. These line ratios suggest moderate excitation conditions of CO lines ($n_{\rm H_2} \sim 10^{3-4}$ cm$^{-3}$) in the central a few kpc region of NGC 986.
△ Less
Submitted 10 May, 2008;
originally announced May 2008.
-
Status of GRB Observations with the Suzaku Wideband All-sky Monitor
Authors:
M. S. Tashiro,
Y. Terada,
Y. Urata,
K. Onda,
N. Kodaka,
A. Endo,
M. Suzuki,
K. Morigami,
K. Yamaoka,
Y. E. Nakagawa,
S. Sugita,
Y. Fukazawa,
M. Ohno,
T. Takahashi,
C. Kira,
T. Uehara,
T. Tamagawa,
T. Enoto,
R. Miyawaki,
K. Nakazawa,
K. Makishima,
E. Sonoda,
M. Yamauchi,
S. Maeno,
H. Tanaka
, et al. (8 additional authors not shown)
Abstract:
The Wide-band All-sky Monitor (WAM) is a function of the large lateral BGO shield of the Hard X-ray Detector (HXD) onboard Suzaku. Its large geometrical area of 800 cm^2 per side, the large stopping power for the hard X-rays and the wide-field of view make the WAM an ideal detector for gamma-ray bursts (GRBs) observations in the energy range of 50-5000 keV. In fact, the WAM has observed 288 GRBs…
▽ More
The Wide-band All-sky Monitor (WAM) is a function of the large lateral BGO shield of the Hard X-ray Detector (HXD) onboard Suzaku. Its large geometrical area of 800 cm^2 per side, the large stopping power for the hard X-rays and the wide-field of view make the WAM an ideal detector for gamma-ray bursts (GRBs) observations in the energy range of 50-5000 keV. In fact, the WAM has observed 288 GRBs confirmed by other satellites, till the end of May 2007.
△ Less
Submitted 29 February, 2008;
originally announced February 2008.
-
A Search for CO(J=3-2) Emission from the Host Galaxy of GRB 980425 with the Atacama Submillimeter Telescope Experiment
Authors:
Bunyo Hatsukade,
Kotaro Kohno,
Akira Endo,
Tomoka Tosaki,
Kouji Ohta,
Seiichi Sakamoto,
Nobuyuki Kawai,
Juan R. Cortes,
Kouichiro Nakanishi,
Takeshi Okuda,
Kazuyuki Muraoka,
Takeshi Sakai,
Paul M. Vreeswijk,
Hajime Ezawa,
Nobuyuki Yamaguchi,
Kazuhisa Kamegai,
Ryohei Kawabe
Abstract:
We report on a deep search for CO(J=3-2) line emission from the host galaxy of GRB 980425 with the Atacama Submillimeter Telescope Experiment (ASTE). We observed five points of the galaxy covering the entire region. After combining all of the spectra, we obtained a global spectrum with the rms noise level of 3.3 mK in T_mb scale at a velocity resolution of 10 km s^-1. No significant emission was…
▽ More
We report on a deep search for CO(J=3-2) line emission from the host galaxy of GRB 980425 with the Atacama Submillimeter Telescope Experiment (ASTE). We observed five points of the galaxy covering the entire region. After combining all of the spectra, we obtained a global spectrum with the rms noise level of 3.3 mK in T_mb scale at a velocity resolution of 10 km s^-1. No significant emission was detected, though we find a marginal emission feature in the velocity range corresponding to the redshift of the galaxy. We derive 3 sigma upper limits on the global properties: the velocity-integrated CO(3-2) intensity of I_CO(3-2) < 0.26 K km s^-1 by adopting a velocity width of 67 km s^-1; the H_2 column density of N(H_2) < 3 x 10^20 cm^-2; the molecular gas mass of M(H_2) < 3 x 10^8 M_sun, by assuming a CO line luminosity to H_2 molecular gas mass conversion factor of X_CO = 5.0 x 10^20 cm^-2 (K km s^-1)^-1; and the star formation rate of SFR < 0.1 M_sun yr^-1, based on the Schmidt law. The SFR is consistent with the previous results of H_alpha and mid-IR observations, thereby suggesting that there is no significant obscured star formation in the host galaxy of GRB 980425. This result implies that there is a variety of GRB hosts with regard to the presence of obscured star formation.
△ Less
Submitted 26 April, 2007;
originally announced April 2007.
-
A Revised Estimate of the CO (J=1-0) Emission from the Host Galaxy of GRB 030329 Using the Nobeyama Millimeter Array
Authors:
Akira Endo,
Kotaro Kohno,
Bunyo Hatsukade,
Kouji Ohta,
Nobuyuki Kawai,
Yoshiaki Sofue,
Kouichiro Nakanishi,
Tomoka Tosaki,
Baltasar Vila-Vilaro,
Nario Kuno,
Takeshi Okuda,
Kazuyuki Muraoka
Abstract:
A sensitive observation of the CO (J=1-0) molecular line emission in the host galaxy of GRB 030329 (z =0.1685) has been performed using the Nobeyama Millimeter Array in order to detect molecular gas and hidden star formation. No sign of CO emission was detected, which invalidates our previous report on the presence of molecular gas. The 3sigma upperlimit on the CO line luminosity (L'_CO) of the…
▽ More
A sensitive observation of the CO (J=1-0) molecular line emission in the host galaxy of GRB 030329 (z =0.1685) has been performed using the Nobeyama Millimeter Array in order to detect molecular gas and hidden star formation. No sign of CO emission was detected, which invalidates our previous report on the presence of molecular gas. The 3sigma upperlimit on the CO line luminosity (L'_CO) of the host galaxy is 6.9 x 10^8 K km s^-1 pc^2. The lowerlimit of the host galaxy's metallicity is estimated to be 12+log(O/H) ~ 7.9, which yields a CO line luminosity to H_2 conversion factor of alpha_CO = 40 Msun (K km s^-1 pc^2)^-1. Assuming this alpha_CO factor, the 3sigma upperlimit on the molecular gas mass of the host galaxy is 2.8 x 10^10 Msun. Based on the Schmidt law, the 3sigma upperlimit of the total star formation rate (SFR) of the host galaxy is estimated to be 38 Msun yr^-1. These results independently confirm the inferences of previous observations in the optical, submillimeter, and X-ray band, which regard this host galaxy as a compact dwarf galaxy, and not a massive, aggressively star forming galaxy.
△ Less
Submitted 7 February, 2007;
originally announced February 2007.
-
ASTE CO(3-2) Observations of the Barred Spiral Galaxy M 83: I. Correlation between CO(3-2)/CO(1-0) Ratios and Star Formation Efficiencies
Authors:
Kazuyuki Muraoka,
Kotaro Kohno,
Tomoka Tosaki,
Nario Kuno,
Kouichiro Nakanishi,
Kazuo Sorai,
Takeshi Okuda,
Seiichi Sakamoto,
Akira Endo,
Bunyo Hatsukade,
Kazuhisa Kamegai,
Kunihiko Tanaka,
Juan Cortes,
Hajime Ezawa,
Nobuyuki Yamaguchi,
Takeshi Sakai,
Ryohei Kawabe
Abstract:
We present CO(J=3-2) emission observations with the Atacama Submillimeter Telescope Experiment (ASTE) toward the 5' x 5' (or 6.6 x 6.6 kpc at the distance D = 4.5 Mpc) region of the nearby barred spiral galaxy M 83. We successfully resolved the major structures, i.e., the nuclear starburst region, bar, and inner spiral arms in CO(J=3-2) emission at a resolution of 22'' (or 480 pc), showing a goo…
▽ More
We present CO(J=3-2) emission observations with the Atacama Submillimeter Telescope Experiment (ASTE) toward the 5' x 5' (or 6.6 x 6.6 kpc at the distance D = 4.5 Mpc) region of the nearby barred spiral galaxy M 83. We successfully resolved the major structures, i.e., the nuclear starburst region, bar, and inner spiral arms in CO(J=3-2) emission at a resolution of 22'' (or 480 pc), showing a good spatial coincidence between CO(J=3-2) and 6 cm continuum emissions. We found a global CO(J=3-2) luminosity L'_CO(3-2) of 5.1 x 10^8 K km s^-1 pc^2 within the observed region. We also found L'_CO(3-2) in the disk region (0.5 < r < 3.5 kpc) of 4.2 x 10^8 K km s^-1 pc^2, indicating that CO(J=3-2) emission in the disk region significantly contributes to the global L'_CO(3-2). From a comparison of a CO(J=3-2) data with CO(J=1-0) intensities measured with Nobeyama 45-m telescope, we found that the radial profile of CO(J=3-2)/CO(J=1-0) integrated intensity ratio R_3-2/1-0 is almost unity in the central region (r < 0.25 kpc), whereas it drops to a constant value, 0.6--0.7, in the disk region. The radial profile of star formation efficiencies (SFEs), determined from 6 cm radio continuum and CO(J=1-0) emission, shows the same trend as that of R_3-2/1-0. At the bar-end (r ~ 2.4 kpc), the amounts of molecular gas and the massive stars are enhanced when compared with other disk regions, whereas there is no excess of R_3-2/1-0 and SFE in that region. This means that a simple summation of the star forming regions at the bar-end and the disk cannot reproduce the nuclear starburst of M 83, implying that the spatial variation of the dense gas fraction traced by R_3-2/1-0 governs the spatial variation of SFE in M 83.
△ Less
Submitted 30 January, 2007; v1 submitted 26 January, 2007;
originally announced January 2007.