-
DUNE Phase II: Scientific Opportunities, Detector Concepts, Technological Solutions
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti
, et al. (1347 additional authors not shown)
Abstract:
The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I…
▽ More
The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the European Strategy for Particle Physics. While the construction of the DUNE Phase I is well underway, this White Paper focuses on DUNE Phase II planning. DUNE Phase-II consists of a third and fourth far detector (FD) module, an upgraded near detector complex, and an enhanced 2.1 MW beam. The fourth FD module is conceived as a "Module of Opportunity", aimed at expanding the physics opportunities, in addition to supporting the core DUNE science program, with more advanced technologies. This document highlights the increased science opportunities offered by the DUNE Phase II near and far detectors, including long-baseline neutrino oscillation physics, neutrino astrophysics, and physics beyond the standard model. It describes the DUNE Phase II near and far detector technologies and detector design concepts that are currently under consideration. A summary of key R&D goals and prototyping phases needed to realize the Phase II detector technical designs is also provided. DUNE's Phase II detectors, along with the increased beam power, will complete the full scope of DUNE, enabling a multi-decadal program of groundbreaking science with neutrinos.
△ Less
Submitted 22 August, 2024;
originally announced August 2024.
-
First Measurement of the Total Inelastic Cross-Section of Positively-Charged Kaons on Argon at Energies Between 5.0 and 7.5 GeV
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti
, et al. (1341 additional authors not shown)
Abstract:
ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each…
▽ More
ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380$\pm$26 mbarns for the 6 GeV/$c$ setting and 379$\pm$35 mbarns for the 7 GeV/$c$ setting.
△ Less
Submitted 1 August, 2024;
originally announced August 2024.
-
Supernova Pointing Capabilities of DUNE
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electr…
▽ More
The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on $^{40}$Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage.
△ Less
Submitted 14 July, 2024;
originally announced July 2024.
-
Motion of 2D exciton in momentum space leads to pseudospin distribution narrowing on the Bloch Sphere
Authors:
Garima Gupta,
Kenji Watanabe,
Takashi Taniguchi,
Kausik Majumdar
Abstract:
Motional narrowing implies narrowing induced by motion, for example, in nuclear resonance, the thermally induced random motion of the nuclei in an inhomogeneous environment leads to counter-intuitive narrowing of the resonance line. Similarly, the excitons in monolayer semiconductors experience magnetic inhomogeneity: the electron-hole spin-exchange interaction manifests as an in-plane pseudo-magn…
▽ More
Motional narrowing implies narrowing induced by motion, for example, in nuclear resonance, the thermally induced random motion of the nuclei in an inhomogeneous environment leads to counter-intuitive narrowing of the resonance line. Similarly, the excitons in monolayer semiconductors experience magnetic inhomogeneity: the electron-hole spin-exchange interaction manifests as an in-plane pseudo-magnetic field with a periodically varying orientation inside the exciton band. The excitons undergo random momentum scattering and pseudospin precession repeatedly in this inhomogeneous magnetic environment - typically resulting in fast exciton depolarization. On the contrary, we show that such magnetic inhomogeneity averages out at high scattering rate due to motional narrowing. Physically, a faster exciton scattering leads to a narrower pseudospin distribution on the Bloch sphere, implying a nontrivial improvement in exciton polarization. The in-plane nature of the pseudo-magnetic field enforces a contrasting scattering dependence between the circularly and linearly polarized excitons - providing a spectroscopic way to gauge the sample quality.
△ Less
Submitted 23 April, 2024;
originally announced April 2024.
-
Performance of a modular ton-scale pixel-readout liquid argon time projection chamber
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi…
▽ More
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar Es-sghir,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1297 additional authors not shown)
Abstract:
Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN…
▽ More
Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 720 t of total liquid argon mass with 410 t of fiducial mass. A 5.4 ppm nitrogen contamination was present during the xenon doping campaign. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen.
△ Less
Submitted 2 August, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
Tensile strain induced brightening of momentum forbidden dark exciton in WS$_2$
Authors:
Tamaghna Chowdhury,
Sagnik Chatterjee,
Dibyasankar Das,
Ivan Timokhin,
Pablo Díaz Núñez,
Gokul M. A.,
Suman Chatterjee,
Kausik Majumdar,
Prasenjit Ghosh,
Artem Mishchenko,
Atikur Rahman
Abstract:
Transition-metal dichalcogenides (TMDs) host tightly bound quasi-particles called excitons. Based on spin and momentum selection rules, these excitons can be either optically bright or dark. In tungsten-based TMDs, momentum-forbidden dark exciton is the energy ground state and therefore it strongly affect the emission properties. In this work, we brighten the momentum forbidden dark exciton by pla…
▽ More
Transition-metal dichalcogenides (TMDs) host tightly bound quasi-particles called excitons. Based on spin and momentum selection rules, these excitons can be either optically bright or dark. In tungsten-based TMDs, momentum-forbidden dark exciton is the energy ground state and therefore it strongly affect the emission properties. In this work, we brighten the momentum forbidden dark exciton by placing WS$_2$ on top of nanotextured substrates which put the WS$_2$ layer under tensile strain, modifying electronic bandstructure. This enables phonon assisted scattering of exciton between momentum valleys, thereby brightening momentum forbidden dark excitons. Our results will pave the way to design ultrasensitive strain sensing devices based on TMDs.
△ Less
Submitted 26 December, 2023;
originally announced December 2023.
-
Scintillation of Ar/CF$_4$ mixtures: glass-THGEM characterization with 1% CF$_4$ at 1-1.5 bar
Authors:
P. Amedo,
R. Hafeji,
A. Roberts,
A. Lowe,
S. Ravinthiran,
S. Leardini,
K. Majumdar,
K. Mavrokoridis,
D. González-Díaz
Abstract:
Argon gas doped with 1% wavelength-shifter (CF$_4$) has been employed in an optical time projection chamber (OTPC) to image cosmic radiation. We present results obtained during the system commissioning, performed with two stacked glass-THGEMs and an EMCCD camera at 1 bar. Preliminary estimates indicate that the combined optical gain was of the order of 10$^6$ (ph/e), producing sharp and high-contr…
▽ More
Argon gas doped with 1% wavelength-shifter (CF$_4$) has been employed in an optical time projection chamber (OTPC) to image cosmic radiation. We present results obtained during the system commissioning, performed with two stacked glass-THGEMs and an EMCCD camera at 1 bar. Preliminary estimates indicate that the combined optical gain was of the order of 10$^6$ (ph/e), producing sharp and high-contrast raw images without resorting to any filtering or post-processing. A first assessment of the impact of pressurization showed no change in the attainable gains when operating at 1.5 bar
△ Less
Submitted 8 April, 2024; v1 submitted 12 December, 2023;
originally announced December 2023.
-
The DUNE Far Detector Vertical Drift Technology, Technical Design Report
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1304 additional authors not shown)
Abstract:
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi…
▽ More
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model.
The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise.
In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered.
This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Polarized and narrow excitonic emission from graphene-capped monolayer WS$_2$ through resonant phonon relaxation
Authors:
Garima Gupta,
Kausik Majumdar
Abstract:
The broadening and polarization of excitonic luminescence in monolayer TMDs largely suffer from inhomogeneity and temperature - an unresolved problem to date. In this work, through few-layer-graphene encapsulation of monolayer WS$_2$, we reduce the inter-excitonic energy separation, which then can have a narrow resonance with a specific phonon mode of our choice. The resulting single-step exciton…
▽ More
The broadening and polarization of excitonic luminescence in monolayer TMDs largely suffer from inhomogeneity and temperature - an unresolved problem to date. In this work, through few-layer-graphene encapsulation of monolayer WS$_2$, we reduce the inter-excitonic energy separation, which then can have a narrow resonance with a specific phonon mode of our choice. The resulting single-step exciton relaxation with the resonating phonon mode significantly suppresses the inhomogeneous broadening, allowing us to achieve the narrowest exciton linewidth of 1.06 meV (which translates to 0.19 meV after deconvolution with the excitation laser linewidth). The single-phonon resonance helps to achieve a high quantum efficiency despite graphene encapsulation. The technique is powerful in tuning the exciton polarization during relaxation by choosing a specific resonating phonon mode. For example, the valley coherence (polarization) improves from $\sim$68% ($\sim$40%) to $\sim$90% ($\sim$75%) on resonance with 2$A_1$' and $A_1$' modes respectively. We further demonstrate a strong polarization reversal on resonance with a chiral phonon mode. Strikingly, the above features remain robust against temperature (up to 200 K) and sample age (few months in ambient condition). The findings will lead to clean excitonic measurements without requiring cryogenic cooling.
△ Less
Submitted 16 August, 2023;
originally announced August 2023.
-
Harmonic to anharmonic tuning of moiré potential leading to unconventional Stark effect and giant dipolar repulsion in WS$_2$/WSe$_2$ heterobilayer
Authors:
Suman Chatterjee,
Medha Dandu,
Pushkar Dasika,
Rabindra Biswas,
Sarthak Das,
Kenji Watanabe,
Takashi Taniguchi,
Varun Raghunathan,
Kausik Majumdar
Abstract:
Excitonic states trapped in harmonic moiré wells of twisted heterobilayers is an intriguing testbed. However, the moiré potential is primarily governed by the twist angle, and its dynamic tuning remains a challenge. Here we demonstrate anharmonic tuning of moiré potential in a WS$_2$/WSe$_2$ heterobilayer through gate voltage and optical power. A gate voltage can result in a local in-plane perturb…
▽ More
Excitonic states trapped in harmonic moiré wells of twisted heterobilayers is an intriguing testbed. However, the moiré potential is primarily governed by the twist angle, and its dynamic tuning remains a challenge. Here we demonstrate anharmonic tuning of moiré potential in a WS$_2$/WSe$_2$ heterobilayer through gate voltage and optical power. A gate voltage can result in a local in-plane perturbing field with odd parity around the high-symmetry points. This allows us to simultaneously observe the first (linear) and second (parabolic) order Stark shift for the ground state and first excited state, respectively, of the moiré trapped exciton - an effect opposite to conventional quantum-confined Stark shift. Depending on the degree of confinement, these excitons exhibit up to twenty-fold gate-tunability in the lifetime ($100$ to $5$ ns). Also, exciton localization dependent dipolar repulsion leads to an optical power-induced blueshift of $\sim$1 meV/$μ$W - a five-fold enhancement over previous reports.
△ Less
Submitted 24 July, 2023;
originally announced July 2023.
-
Impact of cross-section uncertainties on supernova neutrino spectral parameter fitting in the Deep Underground Neutrino Experiment
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1294 additional authors not shown)
Abstract:
A primary goal of the upcoming Deep Underground Neutrino Experiment (DUNE) is to measure the $\mathcal{O}(10)$ MeV neutrinos produced by a Galactic core-collapse supernova if one should occur during the lifetime of the experiment. The liquid-argon-based detectors planned for DUNE are expected to be uniquely sensitive to the $ν_e$ component of the supernova flux, enabling a wide variety of physics…
▽ More
A primary goal of the upcoming Deep Underground Neutrino Experiment (DUNE) is to measure the $\mathcal{O}(10)$ MeV neutrinos produced by a Galactic core-collapse supernova if one should occur during the lifetime of the experiment. The liquid-argon-based detectors planned for DUNE are expected to be uniquely sensitive to the $ν_e$ component of the supernova flux, enabling a wide variety of physics and astrophysics measurements. A key requirement for a correct interpretation of these measurements is a good understanding of the energy-dependent total cross section $σ(E_ν)$ for charged-current $ν_e$ absorption on argon. In the context of a simulated extraction of supernova $ν_e$ spectral parameters from a toy analysis, we investigate the impact of $σ(E_ν)$ modeling uncertainties on DUNE's supernova neutrino physics sensitivity for the first time. We find that the currently large theoretical uncertainties on $σ(E_ν)$ must be substantially reduced before the $ν_e$ flux parameters can be extracted reliably: in the absence of external constraints, a measurement of the integrated neutrino luminosity with less than 10\% bias with DUNE requires $σ(E_ν)$ to be known to about 5%. The neutrino spectral shape parameters can be known to better than 10% for a 20% uncertainty on the cross-section scale, although they will be sensitive to uncertainties on the shape of $σ(E_ν)$. A direct measurement of low-energy $ν_e$-argon scattering would be invaluable for improving the theoretical precision to the needed level.
△ Less
Submitted 7 July, 2023; v1 submitted 29 March, 2023;
originally announced March 2023.
-
ARIADNE+: Large scale demonstration of fast optical readout for dual-phase LArTPCs at the CERN Neutrino Platform
Authors:
Adam Lowe,
Pablo Amedo,
Diego González-Díaz,
Alexander Deisting,
Krishanu Majumdar,
Konstantinos Mavrokoridis,
Marzio Nessi,
Barney Philippou,
Francesco Pietropaolo,
Sudikshan Ravinthiran,
Filippo Resnati,
Adam Roberts,
Angela Saá Hernández,
Christos Touramanis,
Jared Vann
Abstract:
Optical readout of large scale dual-phase liquid Argon TPCs is an attractive alternative to charge readout and has been successfully demonstrated on a 2x2m active region within the CERN protoDUNE cold box. ARIADNE+ uses four Timepix3 cameras imaging the S2 light produced by 16 novel, patent pending, glass THGEMs. ARIADNE+ takes advantage of the raw Timepix3 data coming natively 3D and zero suppres…
▽ More
Optical readout of large scale dual-phase liquid Argon TPCs is an attractive alternative to charge readout and has been successfully demonstrated on a 2x2m active region within the CERN protoDUNE cold box. ARIADNE+ uses four Timepix3 cameras imaging the S2 light produced by 16 novel, patent pending, glass THGEMs. ARIADNE+ takes advantage of the raw Timepix3 data coming natively 3D and zero suppressed with a 1.6ns timing resolution. Three of the four THGEM quadrants implement readout in the visible light range through wavelength shifting, with the fourth featuring a VUV light intensifier, thus removing the need for wavelength shifting altogether. Cosmic ray reconstruction and energy calibration was performed. Presented is a summary of the detector setup and experimental run, preliminary analysis of the run data and future outlook for the ARIADNE program.
△ Less
Submitted 25 August, 2023; v1 submitted 6 January, 2023;
originally announced January 2023.
-
Highly-parallelized simulation of a pixelated LArTPC on a GPU
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1282 additional authors not shown)
Abstract:
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr…
▽ More
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype.
△ Less
Submitted 28 February, 2023; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Optical manipulation of layer-valley coherence via strong exciton-photon coupling in microcavities
Authors:
Mandeep Khatoniar,
Nicholas Yama,
Areg Ghazaryan,
Sriram Guddala,
Pouyan Ghaemi,
Kausik Majumdar,
Vinod Menon
Abstract:
Coherent control and manipulation of quantum degrees of freedom such as spins forms the basis of emerging quantum technologies. In this context, the robust valley degree of freedom and the associated valley pseudospin found in two-dimensional transition metal dichalcogenides is a highly attractive platform. Valley polarization and coherent superposition of valley states have been observed in these…
▽ More
Coherent control and manipulation of quantum degrees of freedom such as spins forms the basis of emerging quantum technologies. In this context, the robust valley degree of freedom and the associated valley pseudospin found in two-dimensional transition metal dichalcogenides is a highly attractive platform. Valley polarization and coherent superposition of valley states have been observed in these systems even up to room temperature. Control of valley coherence is an important building block for the implementation of valley qubit. Large magnetic fields or high-power lasers have been used in the past to demonstrate the control (initialization and rotation) of the valley coherent states. Here we demonstrate control of layer-valley coherence via strong coupling of valley excitons in bilayer WS2 to microcavity photons by exploiting the pseudomagnetic field arising in optical cavities owing to the TE-TM splitting. The use of photonic structures to generate pseudomagnetic fields which can be used to manipulate exciton-polaritons presents an attractive approach to control optical responses without the need for large magnets or high intensity optical pump powers.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
A family of mixture models for beta valued DNA methylation data
Authors:
Koyel Majumdar,
Romina Silva,
Antoinette Sabrina Perry,
Ronald William Watson,
Andrea Rau,
Florence Jaffrezic,
Thomas Brendan Murphy,
Isobel Claire Gormley
Abstract:
As hypermethylation of promoter cytosine-guanine dinucleotide (CpG) islands has been shown to silence tumour suppressor genes, identifying differentially methylated CpG sites between different samples can assist in understanding disease. Differentially methylated CpG sites (DMCs) can be identified using moderated t-tests or nonparametric tests, but this typically requires the use of data transform…
▽ More
As hypermethylation of promoter cytosine-guanine dinucleotide (CpG) islands has been shown to silence tumour suppressor genes, identifying differentially methylated CpG sites between different samples can assist in understanding disease. Differentially methylated CpG sites (DMCs) can be identified using moderated t-tests or nonparametric tests, but this typically requires the use of data transformations due to a lack of appropriate statistical methods able to adequately account for the bounded nature of DNA methylation data.
We propose a family of beta mixture models (BMMs) which use a model-based approach to cluster CpG sites given their original beta-valued methylation data, with no need for transformations. The BMMs allow (i) objective inference of methylation state thresholds and (ii) identification of DMCs between different sample types. The BMMs employ different parameter constraints facilitating application to different study settings. Parameter estimation proceeds via an expectation-maximisation algorithm, with a novel approximation in the maximization step providing tractability and computational feasibility.
Performance of BMMs is assessed through thorough simulation studies, and the BMMs are used to analyse a prostate cancer dataset. The BMMs objectively infer intuitive and biologically interpretable methylation state thresholds, and identify DMCs that are related to genes implicated in carcinogenesis and involved in cancer related pathways. An R package betaclust facilitates widespread use of BMMs.
△ Less
Submitted 18 March, 2024; v1 submitted 3 November, 2022;
originally announced November 2022.
-
Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1235 additional authors not shown)
Abstract:
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is…
▽ More
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons.
△ Less
Submitted 31 May, 2023; v1 submitted 2 November, 2022;
originally announced November 2022.
-
Integration of 3-level MoS$_2$ multi-bridge channel FET with 2D layered contact and gate dielectric
Authors:
Hitesh S,
Pushkar Dasika,
Kenji Watanabe,
Takashi Taniguchi,
Kausik Majumdar
Abstract:
Multi-bridge channel field effect transistor (MBCFET) provides several advantages over FinFET technology and is an attractive solution for sub-5 nm technology nodes. MBCFET is a natural choice for devices that use semiconducting layered materials (such as, MoS$_2$) as the channel due to their dangling-bond-free ultra-thin nature and the possibility of layer-by-layer transfer. MoS$_2$-based MBCFET…
▽ More
Multi-bridge channel field effect transistor (MBCFET) provides several advantages over FinFET technology and is an attractive solution for sub-5 nm technology nodes. MBCFET is a natural choice for devices that use semiconducting layered materials (such as, MoS$_2$) as the channel due to their dangling-bond-free ultra-thin nature and the possibility of layer-by-layer transfer. MoS$_2$-based MBCFET is thus an attractive proposition for drive current boost without compromising on the electrostatics and footprint. Here we demonstrate a 3-level MoS$_2$ MBCFET, where each vertically stacked channel is dual-gated to achieve a saturation current of 174.9 $μ$A (which translates to \txc{90 $μ$A per $μ$m footprint width (@2.7 $μ$m channel length), a near-ideal sub-threshold slope of 63 mV/dec, and an on-off ratio $>$$10^8$. This work sets the benchmark for layer-material-based MBCFET in terms of the number of parallel channels integrated, simultaneously providing high drive current and excellent electrostatic control.
△ Less
Submitted 13 September, 2022;
originally announced September 2022.
-
Charge-Density Wave Driven Giant Thermionic-Current Switching in 1T-TaS$_{2}$/2H-TaSe$_{2}$/2H-MoS$_{2}$ Heterostructure
Authors:
Mehak Mahajan,
Kausik Majumdar
Abstract:
1T-TaS$_2$ exhibits several resistivity phases due to the modulation of charge density wave (CDW). The fact that such phase transition can be driven electrically has attracted a lot of attention in the recent past towards \emph{active-metal} based electronics. However, the bias-driven resistivity switching is not very large ($<$ 5 fold), and an enhancement in the same will highly impact such phase…
▽ More
1T-TaS$_2$ exhibits several resistivity phases due to the modulation of charge density wave (CDW). The fact that such phase transition can be driven electrically has attracted a lot of attention in the recent past towards \emph{active-metal} based electronics. However, the bias-driven resistivity switching is not very large ($<$ 5 fold), and an enhancement in the same will highly impact such phase transition devices. One aspect that is often overlooked is that such phase transition is also accompanied by a significant change in the local temperature due to the low thermal conductivity of 1T-TaS$_2$. In this work, we exploit such electrically driven phase transition induced temperature change to promote carriers over a thermionic barrier in a 1T-TaS$_{2}$/2H-TaSe$_{2}$/2H-MoS$_{2}$ T-Junction, achieving a $964$-fold abrupt switching in the current through the MoS$_2$ channel. The device is highly reconfigurable and exhibits an abrupt reduction in current as well when the biasing configuration changes. The results are promising for several electronic applications, including neuromorphic chips, switching, nonlinear devices, and industrial electronics such as current and temperature sensing.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
Highly nonlinear biexcitonic photocurrent from ultrafast inter-layer charge transfer
Authors:
Sarthak Das,
Garima Gupta,
Suman Chatterjee,
Kenji Watanabe,
Takashi Taniguchi,
Kausik Majumdar
Abstract:
Strong Coulomb interaction in monolayer semiconductors allows them to host optically active large many-body states, such as the five-particle state, charged biexciton. Strong nonlinear light absorption by the charged biexciton under spectral resonance, coupled with its charged nature, makes it intriguing for nonlinear photodetection - an area that is hitherto unexplored. Using the high built-in ve…
▽ More
Strong Coulomb interaction in monolayer semiconductors allows them to host optically active large many-body states, such as the five-particle state, charged biexciton. Strong nonlinear light absorption by the charged biexciton under spectral resonance, coupled with its charged nature, makes it intriguing for nonlinear photodetection - an area that is hitherto unexplored. Using the high built-in vertical electric field in an asymmetrically designed few-layer graphene encapsulated 1L-WS$_2$ heterostructure, here we report a large, highly nonlinear photocurrent arising from the strong absorption by two charged biexciton species under zero external bias (self-powered mode). Time-resolved measurement reveals that the generated charged biexcitons transfer to the few-layer graphene in a timescale of sub-5 ps, indicating an ultrafast intrinsic limit of the photoresponse. By using single- and two-color photoluminescence excitation spectroscopy, we show that the two biexcitonic peaks originate from bright-dark and bright-bright exciton-trion combinations. Such innate nonlinearity in the photocurrent due to its biexcitonic origin, coupled with the ultrafast response due to swift inter-layer charge transfer, exemplifies the promise of manipulating many-body effects in monolayers towards viable optoelectronic applications.
△ Less
Submitted 20 May, 2022;
originally announced May 2022.
-
A High-Quality Entropy Source Using van der Waals Heterojunction for True Random Number Generation
Authors:
Nithin Abraham,
Kenji Watanabe,
Takashi Taniguchi,
Kausik Majumdar
Abstract:
Generators of random sequences used in high-end applications such as cryptography rely on entropy sources for their indeterminism. Physical processes governed by the laws of quantum mechanics are excellent sources of entropy available in nature. However, extracting enough entropy from such systems for generating truly random sequences is challenging while maintaining the feasibility of the extract…
▽ More
Generators of random sequences used in high-end applications such as cryptography rely on entropy sources for their indeterminism. Physical processes governed by the laws of quantum mechanics are excellent sources of entropy available in nature. However, extracting enough entropy from such systems for generating truly random sequences is challenging while maintaining the feasibility of the extraction procedure for real-world applications. Here, we present a compact and an all-electronic van der Waals (vdW) heterostructure-based device capable of detecting discrete charge fluctuations for extracting entropy from physical processes and use it for the generation of independent and identically distributed (IID) true random sequences. We extract a record high value ($>0.98~bits/bit$) of min-entropy using the proposed scheme. We demonstrate an entropy generation rate tunable over multiple orders of magnitude and show the persistence of the underlying physical process for temperatures ranging from cryogenic to ambient conditions. We verify the random nature of the generated sequences using tests such as NIST SP 800-90B standard and other statistical measures and verify the suitability our random sequence for cryptographic applications using the NIST SP 800-22 standard. The generated random sequences are then used in implementing various randomized algorithms without any preconditioning steps.
△ Less
Submitted 13 April, 2022;
originally announced April 2022.
-
Trion-trion annihilation in monolayer WS$_2$
Authors:
Suman Chatterjee,
Garima Gupta,
Sarthak Das,
Kenji Watanabe,
Takashi Taniguchi,
Kausik Majumdar
Abstract:
Strong Coulomb interaction in monolayer transition metal dichalcogenides can facilitate nontrivial many-body effects among excitonic complexes. Many-body effects like exciton-exciton annihilation (EEA) have been widely explored in this material system. However, a similar effect for charged excitons (or trions), that is, trion-trion annihilation (TTA), is expected to be relatively suppressed due to…
▽ More
Strong Coulomb interaction in monolayer transition metal dichalcogenides can facilitate nontrivial many-body effects among excitonic complexes. Many-body effects like exciton-exciton annihilation (EEA) have been widely explored in this material system. However, a similar effect for charged excitons (or trions), that is, trion-trion annihilation (TTA), is expected to be relatively suppressed due to repulsive like-charges, and has not been hitherto observed in such layered semiconductors. By a gate-dependent tuning of the spectral overlap between the trion and the charged biexciton through an "anti-crossing"-like behaviour in monolayer WS$_2$, here we present an experimental observation of an anomalous suppression of the trion emission intensity with an increase in gate voltage. The results strongly correlate with time-resolved measurements, and are inferred as a direct evidence of a nontrivial TTA resulting from non-radiative Auger recombination of a bright trion, and the corresponding energy resonantly promoting a dark trion to a charged biexciton state. The extracted Auger coefficient for the process is found to be tunable ten-fold through a gate-dependent tuning of the spectral overlap.
△ Less
Submitted 3 April, 2022;
originally announced April 2022.
-
Probing biexciton in monolayer WS$_2$ through controlled many-body interaction
Authors:
Suman Chatterjee,
Sarthak Das,
Garima Gupta,
Kenji Watanabe,
Takashi Taniguchi,
Kausik Majumdar
Abstract:
The monolayers of semiconducting transition metal dichalcogenides host strongly bound excitonic complexes and are an excellent platform for exploring many-body physics. Here we demonstrate a controlled kinetic manipulation of the five-particle excitonic complex, the charged biexciton, through a systematic dependence of the biexciton peak on excitation power, gate voltage, and temperature using ste…
▽ More
The monolayers of semiconducting transition metal dichalcogenides host strongly bound excitonic complexes and are an excellent platform for exploring many-body physics. Here we demonstrate a controlled kinetic manipulation of the five-particle excitonic complex, the charged biexciton, through a systematic dependence of the biexciton peak on excitation power, gate voltage, and temperature using steady-state and time-resolved photoluminescence (PL). With the help of a combination of the experimental data and a rate equation model, we argue that the binding energy of the charged biexciton is less than the spectral separation of its peak from the neutral exciton. We also note that while the momentum-direct radiative recombination of the neutral exciton is restricted within the light cone, such restriction is relaxed for a charged biexciton recombination due to the presence of near-parallel excited and final states in the momentum space.
△ Less
Submitted 2 April, 2022;
originally announced April 2022.
-
Electrically Tunable Localized versus Delocalized Intralayer Moiré Excitons and Trions in a Twisted MoS$_2$ Bilayer
Authors:
Medha Dandu,
Garima Gupta,
Pushkar Dasika,
Kenji Watanabe,
Takashi Taniguchi,
Kausik Majumdar
Abstract:
Moiré superlattice-induced sub-bands in twisted van der Waals homo- and hetero-structures govern their optical and electrical properties, rendering additional degrees of freedom such as twist angle. Here, we demonstrate the moiré superlattice effects on the intralayer excitons and trions in a twisted bilayer of MoS$_2$ of H-type stacking at marginal twist angles. We identify the emission from loca…
▽ More
Moiré superlattice-induced sub-bands in twisted van der Waals homo- and hetero-structures govern their optical and electrical properties, rendering additional degrees of freedom such as twist angle. Here, we demonstrate the moiré superlattice effects on the intralayer excitons and trions in a twisted bilayer of MoS$_2$ of H-type stacking at marginal twist angles. We identify the emission from localized and multiple delocalized sub-bands of intralayer moiré excitons and show their electrical modulation by the corresponding trion formation. The electrical control of the oscillator strength of the moiré excitons also results in a strong tunability of resonant Raman scattering. We find that the gate-induced doping significantly modulates the electronic moiré potential, however leaves the excitonic moiré confinement unaltered. This effect, coupled with variable moiré trap filling by tuning the optical excitation density, allows us to delineate the different phases of localized and delocalized moiré trions. We demonstrate that the moiré excitons exhibit strong valley coherence that changes in a striking non-monotonic W-shape with gating due to motional narrowing. These observations from the simultaneous electrostatic control of quasiparticle-dependent moiré potential will lead to exciting effects of tunable many-body phenomena in moiré superlattices.
△ Less
Submitted 11 March, 2022;
originally announced March 2022.
-
A Novel Manufacturing Process for Glass THGEMs and First Characterisation in an Optical Gaseous Argon TPC
Authors:
Adam Lowe,
Krishanu Majumdar,
Konstantinos Mavrokoridis,
Barney Philippou,
Adam Roberts,
Christos Touramanis
Abstract:
This paper details a novel, patent pending, abrasive machining manufacturing process for the formation of sub-millimetre holes in THGEMs, with the intended application in gaseous and dual-phase TPCs. Abrasive machining favours a non-ductile substrate such as glasses or ceramics. This innovative manufacturing process allows for unprecedented versatility in THGEM substrates, electrodes, and hole geo…
▽ More
This paper details a novel, patent pending, abrasive machining manufacturing process for the formation of sub-millimetre holes in THGEMs, with the intended application in gaseous and dual-phase TPCs. Abrasive machining favours a non-ductile substrate such as glasses or ceramics. This innovative manufacturing process allows for unprecedented versatility in THGEM substrates, electrodes, and hole geometry and pattern. Consequently, THGEMs produced via abrasive machining can be tailored for specific properties, for example: high stiffness, low total thickness variation, radiopurity, moisture absorption/outgassing and/or carbonisation resistance. This paper specifically focuses on three glass substrate THGEMs (G-THGEMs) made from Schott Borofloat 33 and Fused Silica. Circular and hexagonal hole shapes are also investigated. The G-THGEM electrodes are made from Indium Tin Oxide (ITO), with a resistivity of 150 $Ω$/Sq. All G-THGEMs were characterised in an optical (EMCCD) readout GArTPC, and compared to a traditionally manufactured FR4 THGEM, with their charging and secondary scintillation (S2) light production behaviour analysed.
△ Less
Submitted 10 November, 2021; v1 submitted 7 September, 2021;
originally announced September 2021.
-
Observation of ~100% valley-coherent excitons in monolayer MoS2 through giant enhancement of valley coherence time
Authors:
Garima Gupta,
Kenji Watanabe,
Takashi Taniguchi,
Kausik Majumdar
Abstract:
In monolayer transition metal dichalcogenide semiconductors, valley coherence degrades rapidly due to a combination of fast scattering and inter-valley exchange interaction. This leads to a sub-picosecond valley coherence time, making coherent manipulation of exciton a highly challenging task. Using monolayer MoS2 sandwiched between top and bottom graphene, here we demonstrate fully valley coheren…
▽ More
In monolayer transition metal dichalcogenide semiconductors, valley coherence degrades rapidly due to a combination of fast scattering and inter-valley exchange interaction. This leads to a sub-picosecond valley coherence time, making coherent manipulation of exciton a highly challenging task. Using monolayer MoS2 sandwiched between top and bottom graphene, here we demonstrate fully valley coherent excitons by observing ~100% degree of linear polarization in steady state photoluminescence. This is achieved in this unique design through a combined effect of (a) suppression in exchange interaction due to enhanced dielectric screening, (b) reduction in exciton lifetime due to a fast inter-layer transfer to graphene, and (c) operating in the motional narrowing regime. We disentangle the role of the key parameters affecting valley coherence by using a combination of calculation (solutions of Bethe-Salpeter and Maialle-Silva-Sham equations) and a careful choice of design of experiments using four different stacks with systematic variation of screening and exciton lifetime. To the best of our knowledge, this is the first report in which the excitons are found to be valley coherent in the entire lifetime in monolayer semiconductors, allowing optical readout of valley coherence possible.
△ Less
Submitted 20 June, 2023; v1 submitted 7 June, 2021;
originally announced June 2021.
-
The SNO+ Experiment
Authors:
SNO+ Collaboration,
:,
V. Albanese,
R. Alves,
M. R. Anderson,
S. Andringa,
L. Anselmo,
E. Arushanova,
S. Asahi,
M. Askins,
D. J. Auty,
A. R. Back,
S. Back,
F. Barão,
Z. Barnard,
A. Barr,
N. Barros,
D. Bartlett,
R. Bayes,
C. Beaudoin,
E. W. Beier,
G. Berardi,
A. Bialek,
S. D. Biller,
E. Blucher
, et al. (229 additional authors not shown)
Abstract:
The SNO+ experiment is located 2 km underground at SNOLAB in Sudbury, Canada. A low background search for neutrinoless double beta ($0νββ$) decay will be conducted using 780 tonnes of liquid scintillator loaded with 3.9 tonnes of natural tellurium, corresponding to 1.3 tonnes of $^{130}$Te. This paper provides a general overview of the SNO+ experiment, including detector design, construction of pr…
▽ More
The SNO+ experiment is located 2 km underground at SNOLAB in Sudbury, Canada. A low background search for neutrinoless double beta ($0νββ$) decay will be conducted using 780 tonnes of liquid scintillator loaded with 3.9 tonnes of natural tellurium, corresponding to 1.3 tonnes of $^{130}$Te. This paper provides a general overview of the SNO+ experiment, including detector design, construction of process plants, commissioning efforts, electronics upgrades, data acquisition systems, and calibration techniques. The SNO+ collaboration is reusing the acrylic vessel, PMT array, and electronics of the SNO detector, having made a number of experimental upgrades and essential adaptations for use with the liquid scintillator. With low backgrounds and a low energy threshold, the SNO+ collaboration will also pursue a rich physics program beyond the search for $0νββ$ decay, including studies of geo- and reactor antineutrinos, supernova and solar neutrinos, and exotic physics such as the search for invisible nucleon decay. The SNO+ approach to the search for $0νββ$ decay is scalable: a future phase with high $^{130}$Te-loading is envisioned to probe an effective Majorana mass in the inverted mass ordering region.
△ Less
Submitted 25 August, 2021; v1 submitted 23 April, 2021;
originally announced April 2021.
-
Two-dimensional ReS2: Solution to the Unresolved Queries on Its Structure and Inter-layer Coupling Leading to Potential Optical Applications
Authors:
Janardhan Rao Gadde+,
Anasuya Karmakar+,
Tuhin Kumar Maji+,
Subhrajit Mukherjee,
Rajath Alexander,
Anjanashree M R Sharma,
Sarthak Das,
Anirban Mondal,
Kinshuk Dasgupta,
Akshay Naik,
Kausik Majumdar,
Ranjit Hawaldar,
K V Adarsh,
Samit Kumar Ray,
Debjani Karmakar
Abstract:
Over the last few years, ReS2 has generated a myriad of unattended queries regarding its structure, the concomitant thickness dependent electronic properties and apparently contrasting experimental optical response. In this work, with elaborate first-principles investigations, using density functional theory (DFT) and time-dependent DFT (TDDFT), we identify the structure of ReS2, which is capable…
▽ More
Over the last few years, ReS2 has generated a myriad of unattended queries regarding its structure, the concomitant thickness dependent electronic properties and apparently contrasting experimental optical response. In this work, with elaborate first-principles investigations, using density functional theory (DFT) and time-dependent DFT (TDDFT), we identify the structure of ReS2, which is capable of reproducing and analyzing the layer-dependent optical response. The theoretical results are further validated by an in-depth structural, chemical, optical and optoelectronic analysis of the large-area ReS2 thin films, grown by chemical vapor deposition (CVD) process. Micro-Raman (MR), X-ray photoelectron spectroscopy (XPS), cross-sectional transmission electron microscopy (TEM) and energy-dispersive X-ray analysis (EDAX) have enabled the optimization of the uniform growth of the CVD films. The correlation between the layer-dependent optical and electronic properties of the excited states was established by static photoluminescence (PL) and transient absorption (TA) measurements. Sulfur vacancy-induced localized mid-gap states render a significantly long life-time of the excitons in these films. The ionic gel top-gated photo-detectors, fabricated from the as-prepared CVD films, exhibit a large photo-response of ~ 5 A/W and a remarkable detectivity of ~ 1011 Jones. The outcome of the present work will be useful to promote the application of vertically grown large-area films in the field of optics and opto-electronics.
△ Less
Submitted 1 May, 2021; v1 submitted 26 March, 2021;
originally announced March 2021.
-
Review of Liquid Argon Detector Technologies in the Neutrino Sector
Authors:
Krishanu Majumdar,
Konstantinos Mavrokoridis
Abstract:
Liquid Argon (LAr) is one of the most widely used scintillators in particle detection, due to its low cost, high availability and excellent scintillation properties. A large number of experiments in the neutrino sector are based around using LAr in one or more Time Projection Chambers (TPCs), leading to high resolution three-dimensional particle reconstruction. In this paper, we review and summari…
▽ More
Liquid Argon (LAr) is one of the most widely used scintillators in particle detection, due to its low cost, high availability and excellent scintillation properties. A large number of experiments in the neutrino sector are based around using LAr in one or more Time Projection Chambers (TPCs), leading to high resolution three-dimensional particle reconstruction. In this paper, we review and summarise a number of these Liquid Argon Time Projection Chamber (LArTPC) experiments, and briefly describe the specific technologies that they currently employ. This includes single phase LAr experiments (ICARUS T600, MicroBooNE, SBND, LArIAT, DUNE-SP, ProtoDUNE-SP, ArgonCube and Vertical Drift) and dual phase LAr experiments (DUNE-DP, WA105, ProtoDUNE-DP and ARIADNE). We also discuss some new avenues of research in the field of LArTPC readout, which show potential for wide-scale use in the near future.
△ Less
Submitted 10 March, 2021;
originally announced March 2021.
-
Accurate Extraction of Schottky Barrier Height and Universality of Fermi Level De-pinning of van der Waals Contacts
Authors:
Krishna Murali,
Medha Dandu,
Kenji Watanabe,
Takashi Taniguchi,
Kausik Majumdar
Abstract:
Due to Fermi level pinning (FLP), metal-semiconductor contact interfaces result in a Schottky barrier height (SBH), which is usually difficult to tune. This makes it challenging to efficiently inject both electrons and holes using the same metal - an essential requirement for several applications, including light-emitting devices and complementary logic. Interestingly, modulating the SBH in the Sc…
▽ More
Due to Fermi level pinning (FLP), metal-semiconductor contact interfaces result in a Schottky barrier height (SBH), which is usually difficult to tune. This makes it challenging to efficiently inject both electrons and holes using the same metal - an essential requirement for several applications, including light-emitting devices and complementary logic. Interestingly, modulating the SBH in the Schottky-Mott limit of de-pinned van der Waals (vdW) contacts becomes possible. However, accurate extraction of the SBH is essential to exploit such contacts to their full potential. In this work, we propose a simple technique to accurately estimate the SBH at the vdW contact interfaces by circumventing several ambiguities associated with SBH extraction. Using this technique on several vdW contacts, including metallic 2H-TaSe$_2$, semi-metallic graphene, and degenerately doped semiconducting SnSe$_2$, we demonstrate that vdW contacts exhibit a universal de-pinned nature. Superior ambipolar carrier injection properties of vdW contacts are demonstrated (with Au contact as a reference) in two applications, namely, (a) pulsed electroluminescence from monolayer WS$_2$ using few-layer graphene (FLG) contact, and (b) efficient carrier injection to WS$_2$ and WSe$_2$ channels in both nFET and pFET modes using 2H-TaSe$_2$ contact.
△ Less
Submitted 12 February, 2021;
originally announced February 2021.
-
Contact-Barrier Free, High Mobility, Dual-Gated Junctionless Transistor Using Tellurium Nanowire
Authors:
Pushkar Dasika,
Debadarshini Samantaray,
Krishna Murali,
Nithin Abraham,
Kenji Watanabe,
Takashi Taniguchi,
N. Ravishankar,
Kausik Majumdar
Abstract:
Gate-all-around nanowire transistor, due to its extremely tight electrostatic control and vertical integration capability, is a highly promising candidate for sub-5 nm technology node. In particular, the junctionless nanowire transistors are highly scalable with reduced variability due to avoidance of steep source/drain junction formation by ion implantation. Here we demonstrate a dual-gated junct…
▽ More
Gate-all-around nanowire transistor, due to its extremely tight electrostatic control and vertical integration capability, is a highly promising candidate for sub-5 nm technology node. In particular, the junctionless nanowire transistors are highly scalable with reduced variability due to avoidance of steep source/drain junction formation by ion implantation. Here we demonstrate a dual-gated junctionless nanowire \emph{p}-type field effect transistor using tellurium nanowire as the channel. The dangling-bond-free surface due to the unique helical crystal structure of the nanowire, coupled with an integration of dangling-bond-free, high quality hBN gate dielectric, allows us to achieve a phonon-limited field effect hole mobility of $570\,\mathrm{cm^{2}/V\cdot s}$ at 270 K, which is well above state-of-the-art strained Si hole mobility. By lowering the temperature, the mobility increases to $1390\,\mathrm{cm^{2}/V\cdot s}$ and becomes primarily limited by Coulomb scattering. \txc{The combination of an electron affinity of $\sim$4 eV and a small bandgap of tellurium provides zero Schottky barrier height for hole injection at the metal-contact interface}, which is remarkable for reduction of contact resistance in a highly scaled transistor. Exploiting these properties, coupled with the dual-gated operation, we achieve a high drive current of $216\,\mathrm{μA/μm}$ while maintaining an on-off ratio in excess of $2\times10^4$. The findings have intriguing prospects for alternate channel material based next-generation electronics.
△ Less
Submitted 5 February, 2021;
originally announced February 2021.
-
Combinatorial Large-area MoS2/Anatase-TiO2 interface: A Pathway to Emergent Optical and Opto-electronic Functionalities
Authors:
Tuhin Kumar Maji,
J R Aswin,
Subhrajit Mukherjee,
Rajath Alexander,
Anirban Mondal,
Sarthak Das,
R. K. Sharma,
N. K. Chakraborty,
K. Dasgupta,
Anjanashree M R Sharma,
Ranjit Hawalder,
Manjiri Pandey,
Akshay Naik,
Kausik Majumdar,
Samir Kumar Pal,
K V Adarsh,
Samit Kumar Ray,
Debjani Karmakar
Abstract:
Interface of transition metal dichalcogenide (TMDC) and high-k dielectric transition metal oxides (TMO) had triggerred umpteen discourses due to the indubitable impact of TMO in reducing the contact resistances and restraining the Fermi-level pinning for the metal-TMDC contacts. In the present work, we focus on the unresolved tumults of large-area TMDC/TMO interfaces, grown by adopting different t…
▽ More
Interface of transition metal dichalcogenide (TMDC) and high-k dielectric transition metal oxides (TMO) had triggerred umpteen discourses due to the indubitable impact of TMO in reducing the contact resistances and restraining the Fermi-level pinning for the metal-TMDC contacts. In the present work, we focus on the unresolved tumults of large-area TMDC/TMO interfaces, grown by adopting different techniques. Here, on a pulsed laser deposited (PLD) MoS2 thin film, a layer of TiO2 is grown by using both atomic layer deposition (ALD) and PLD. These two different techniques emanate TiO2 layers with different crystalline properties, thicknesses and interfacial morphologies, subsequently influencing the electronic and optical properties of the interfaces. In addition, they manifest a boost in the extent of p-type doping with increasing thickness of TiO2, as emerged after analyzing the core-level shifts of the X-ray photoelectron spectra (XPS). Density functional analysis of the MoS2/Anatase-TiO2 interfaces, for pristine and in presence of a wide range of interfacial defects, could explain the interdependence of doping and the terminating atomic-surface of TiO2 on MoS2. The optical properties of the interface, encompassing the photoluminescence, transient absorption and z-scan two-photon absorption indicate the presence of defect-induced localized mid-gap levels in MoS2/TiO2 (PLD), resulting quenched exciton signals. On the contrary, the relatively defect-free interface in MoS2/TiO2 (ALD) demonstrates a clear presence of both A and B excitons of MoS2. From the investigation of optical properties, we indicate that MoS2/TiO2 (PLD) interface may act as a promising saturable absorber. Moreover, MoS2/TiO2 (PLD) interface had resulted a better photo-transport. A potential application of MoS2/TiO2 (PLD) is demonstrated by the fabrication of a p-type photo-transistor with the ionic-gel top gate.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Quantum fluctuation effects on the ordered Moments in a two dimensional frustrated ferrimagnet
Authors:
Kingshuk Majumdar,
Subhendra D. Mahanti
Abstract:
We propose a novel two-dimensional (2D)frustrated quantum spin-1/2 anisotropic Heisenberg model with alternating ferromagnetic and antiferromagnetic magnetic chains along one direction and antiferromagnetic interactions along the other. The (mean-field) ground state is ferrimagnetic in certain range of the interaction space. Spin-wave theory analysis of the reduction of ordered moments at inequiva…
▽ More
We propose a novel two-dimensional (2D)frustrated quantum spin-1/2 anisotropic Heisenberg model with alternating ferromagnetic and antiferromagnetic magnetic chains along one direction and antiferromagnetic interactions along the other. The (mean-field) ground state is ferrimagnetic in certain range of the interaction space. Spin-wave theory analysis of the reduction of ordered moments at inequivalent spin sites and the instability of the spin waves suggest a quantum phase transition which has the characteristics of both the frustrated two-dimensional antiferromagnetic S=1/2 ($J_1, J_2$) model and 1D S$_1$=1, S$_2$=1/2 quantum ferrimagnetic model.
△ Less
Submitted 18 January, 2021;
originally announced January 2021.
-
Development, characterisation, and deployment of the SNO+ liquid scintillator
Authors:
SNO+ Collaboration,
:,
M. R. Anderson,
S. Andringa,
L. Anselmo,
E. Arushanova,
S. Asahi,
M. Askins,
D. J. Auty,
A. R. Back,
Z. Barnard,
N. Barros,
D. Bartlett,
F. Barão,
R. Bayes,
E. W. Beier,
A. Bialek,
S. D. Biller,
E. Blucher,
R. Bonventre,
M. Boulay,
D. Braid,
E. Caden,
E. J. Callaghan,
J. Caravaca
, et al. (201 additional authors not shown)
Abstract:
A liquid scintillator consisting of linear alkylbenzene as the solvent and 2,5-diphenyloxazole as the fluor was developed for the SNO+ experiment. This mixture was chosen as it is compatible with acrylic and has a competitive light yield to pre-existing liquid scintillators while conferring other advantages including longer attenuation lengths, superior safety characteristics, chemical simplicity,…
▽ More
A liquid scintillator consisting of linear alkylbenzene as the solvent and 2,5-diphenyloxazole as the fluor was developed for the SNO+ experiment. This mixture was chosen as it is compatible with acrylic and has a competitive light yield to pre-existing liquid scintillators while conferring other advantages including longer attenuation lengths, superior safety characteristics, chemical simplicity, ease of handling, and logistical availability. Its properties have been extensively characterized and are presented here. This liquid scintillator is now used in several neutrino physics experiments in addition to SNO+.
△ Less
Submitted 21 February, 2021; v1 submitted 25 November, 2020;
originally announced November 2020.
-
Highly tunable layered exciton in bilayer WS$_2$: linear quantum confined Stark effect versus electrostatic doping
Authors:
Sarthak Das,
Medha Dandu,
Garima Gupta,
Krishna Murali,
Nithin Abraham,
Sangeeth Kallatt,
Kenji Watanabe,
Takashi Taniguchi,
Kausik Majumdar
Abstract:
In 1H monolayer transition metal dichalcogenide, the inversion symmetry is broken, while the reflection symmetry is maintained. On the contrary, in the bilayer, the inversion symmetry is restored, but the reflection symmetry is broken. As a consequence of these contrasting symmetries, here we show that bilayer WS$_2$ exhibits a quantum confined Stark effect (QCSE) that is linear with the applied o…
▽ More
In 1H monolayer transition metal dichalcogenide, the inversion symmetry is broken, while the reflection symmetry is maintained. On the contrary, in the bilayer, the inversion symmetry is restored, but the reflection symmetry is broken. As a consequence of these contrasting symmetries, here we show that bilayer WS$_2$ exhibits a quantum confined Stark effect (QCSE) that is linear with the applied out-of-plane electric field, in contrary to a quadratic one for a monolayer. The interplay between the unique layer degree of freedom in the bilayer and the field driven partial inter-conversion between intra-layer and inter-layer excitons generates a giant tunability of the exciton oscillator strength. This makes bilayer WS$_2$ a promising candidate for an atomically thin, tunable electro-absorption modulator at the exciton resonance, particularly when stacked on top of a graphene layer that provides an ultra-fast non-radiative relaxation channel. By tweaking the biasing configuration, we further show that the excitonic response can be largely tuned through electrostatic doping, by efficiently transferring the oscillator strength from neutral to charged exciton. The findings are prospective towards highly tunable, atomically thin, compact and light, on chip, reconfigurable components for next generation optoelectronics.
△ Less
Submitted 13 November, 2020;
originally announced November 2020.
-
Optical Readout of the ARIADNE LArTPC using a Timepix3-based Camera
Authors:
Adam Lowe,
Krishanu Majumdar,
Konstantinos Mavrokoridis,
Barney Philippou,
Adam Roberts,
Christos Touramanis,
Jared Vann
Abstract:
The ARIADNE Experiment, utilising a 1-ton dual-phase Liquid Argon Time Projection Chamber (LArTPC), aims to develop and mature optical readout technology for large scale LAr detectors. This paper describes the characterisation, using cosmic muons, of a Timepix3-based camera mounted on the ARIADNE detector. The raw data from the camera are natively 3D and zero suppressed, allowing for straightforwa…
▽ More
The ARIADNE Experiment, utilising a 1-ton dual-phase Liquid Argon Time Projection Chamber (LArTPC), aims to develop and mature optical readout technology for large scale LAr detectors. This paper describes the characterisation, using cosmic muons, of a Timepix3-based camera mounted on the ARIADNE detector. The raw data from the camera are natively 3D and zero suppressed, allowing for straightforward event reconstruction, and a gallery of reconstructed LAr interaction events is presented. Taking advantage of the 1.6 ns time resolution of the readout, the drift velocity of the ionised electrons in LAr was determined to be 1.608 \pm 0.005 mm/μs at 0.54 kV/cm. Energy calibration and resolution were determined using through-going muons. The energy resolution was found to be approximately 11 % for the presented dataset. A preliminary study of the energy deposition (dE/dx) as a function of distance has also been performed for two stopping muon events, and comparison to GEANT4 simulation shows good agreement. The results presented demonstrate the capabilities of this technology, and its application is discussed in the context of the future kiloton-scale dual-phase LAr detectors that will be used in the DUNE programme.
△ Less
Submitted 1 December, 2020; v1 submitted 4 November, 2020;
originally announced November 2020.
-
Anomalous Stark Shift of Excitonic Complexes in Monolayer Semiconductor
Authors:
Nithin Abraham,
Kenji Watanabe,
Takashi Taniguchi,
Kausik Majumdar
Abstract:
Monolayer transition metal dichalcogenide semiconductors host strongly bound two-dimensional excitonic complexes, and form an excellent platform for probing many-body physics through manipulation of Coulomb interaction. Quantum confined Stark effect is one of the routes to dynamically tune the emission line of these excitonic complexes. In this work, using a high quality graphene/hBN/WS$_2$/hBN/Au…
▽ More
Monolayer transition metal dichalcogenide semiconductors host strongly bound two-dimensional excitonic complexes, and form an excellent platform for probing many-body physics through manipulation of Coulomb interaction. Quantum confined Stark effect is one of the routes to dynamically tune the emission line of these excitonic complexes. In this work, using a high quality graphene/hBN/WS$_2$/hBN/Au vertical heterojunction, we demonstrate for the first time, an out-of-plane electric field driven change in the sign of the Stark shift from blue to red for four different excitonic species, namely, the neutral exciton, the charged exciton (trion), the charged biexciton, and the defect-bound exciton. Such universal non-monotonic Stark shift with electric field arises from a competition between the conventional quantum confined Stark effect driven red shift and a suppressed binding energy driven anomalous blue shift of the emission lines, with the latter dominating in the low field regime. We also find that the encapsulating environment of the monolayer TMDC plays an important role in wave function spreading, and hence in determining the magnitude of the blue Stark shift. The results for neutral and charged excitonic species are in excellent agreement with calculations from Bethe-Salpeter Equation that uses seven-band per spin tight binding Hamiltonian. The findings have important implications in probing many-body interaction in the two dimension as well as in developing layered semiconductor based tunable optoelectronic devices.
△ Less
Submitted 31 October, 2020;
originally announced November 2020.
-
Astability versus Bistability in van der Waals Tunnel Diode for Voltage Controlled Oscillator and Memory Applications
Authors:
Nithin Abraham,
Krishna Murali,
Kenji Watanabe,
Takashi Taniguchi,
Kausik Majumdar
Abstract:
Van der Waals (vdW) tunnel junctions are attractive due to their atomically sharp interface, gate tunablity, and robustness against lattice mismatch between the successive layers. However, the negative differential resistance (NDR) demonstrated in this class of tunnel diodes often exhibits noisy behaviour with low peak current density, and lacks robustness and repeatability, limiting their practic…
▽ More
Van der Waals (vdW) tunnel junctions are attractive due to their atomically sharp interface, gate tunablity, and robustness against lattice mismatch between the successive layers. However, the negative differential resistance (NDR) demonstrated in this class of tunnel diodes often exhibits noisy behaviour with low peak current density, and lacks robustness and repeatability, limiting their practical circuit applications. Here we propose a strategy of using a 1L-WS$_2$ as an optimum tunnel barrier sandwiched in a broken gap tunnel junction of highly doped black phosphorus (BP) and SnSe$_2$. We achieve high yield tunnel diodes exhibiting highly repeatable, ultra-clean, and gate tunable NDR characteristics with a signature of intrinsic oscillation, and a large peak-to-valley current ratio (PVCR) of 3.6 at 300 K (4.6 at 7 K), making them suitable for practical applications. We show that the thermodynamic stability of the vdW tunnel diode circuit can be tuned from astability to bistability by altering the constraint through choosing a voltage or a current bias, respectively. In the astable mode under voltage bias, we demonstrate a compact, voltage controlled oscillator without the need for an external tank circuit. In the bistable mode under current bias, we demonstrate a highly scalable, single element one-bit memory cell that is promising for dense random access memory applications in memory intensive computation architectures.
△ Less
Submitted 26 October, 2020;
originally announced October 2020.
-
First Demonstration of the Use of LG-SiPMs for Optical Readout of a TPC
Authors:
A. Gola,
K. Majumdar,
G. Casse,
K. Mavrokoridis,
S. Merzi,
L. Parsons Franca
Abstract:
This paper describes a new method for optical readout of Time Projection Chambers (TPCs), based on the Linearly Graded Silicon Photomultiplier (LG-SiPM). This is a single photon-sensitive detector with excellent timing and 2D position resolution developed at Fondazione Bruno Kessler, Trento (FBK). The LG-SiPM produces time-varying voltage signals that are used to reconstruct the 3D position and en…
▽ More
This paper describes a new method for optical readout of Time Projection Chambers (TPCs), based on the Linearly Graded Silicon Photomultiplier (LG-SiPM). This is a single photon-sensitive detector with excellent timing and 2D position resolution developed at Fondazione Bruno Kessler, Trento (FBK). The LG-SiPM produces time-varying voltage signals that are used to reconstruct the 3D position and energy of ionisation tracks generated inside the TPC. The TPC used in this work contained room-temperature CF$_4$ gas at a pressure of 100 mbar, with two THGEMs to produce secondary scintillation light. A collimated $^{241}$Am source (Q$_α$ = 5.486 MeV) was used to produce the ionisation tracks. The successful reconstruction of these tracks is demonstrated, and the consistency of the methodology characterised through varying the geometry of the tracks within the TPC. Energy reconstruction and deposition studies are also described, demonstrating the feasibility of the LG-SiPM as a potential option for optical TPC readout.
△ Less
Submitted 14 December, 2020; v1 submitted 10 September, 2020;
originally announced September 2020.
-
Anharmonicity in Raman-active phonon modes in atomically thin MoS$_2$
Authors:
Suman Sarkar,
Indrajit Maity,
H. L. Pradeepa,
Goutham Nayak,
Laetitia Marty,
Julien Renard,
Johann Coraux,
Nedjma Bendiab,
Vincent Bouchiat,
Sarthak Das,
Kausik Majumdar,
Manish Jain,
Aveek Bid
Abstract:
Phonon-phonon anharmonic effects have a strong influence on the phonon spectrum; most prominent manifestation of these effects are the softening (shift in frequency) and broadening (change in FWHM) of the phonon modes at finite temperature. Using Raman spectroscopy, we studied the temperature dependence of the FWHM and Raman shift of $\mathrm{E_{2g}^1}$ and $\mathrm{A_{1g}}$ modes for single-layer…
▽ More
Phonon-phonon anharmonic effects have a strong influence on the phonon spectrum; most prominent manifestation of these effects are the softening (shift in frequency) and broadening (change in FWHM) of the phonon modes at finite temperature. Using Raman spectroscopy, we studied the temperature dependence of the FWHM and Raman shift of $\mathrm{E_{2g}^1}$ and $\mathrm{A_{1g}}$ modes for single-layer and natural bilayer MoS$_2$ over a broad range of temperatures ($8 < $T$ < 300$ K). Both the Raman shift and FWHM of these modes show linear temperature dependence for $T>100$ K, whereas they become independent of temperature for $T<100$ K. Using first-principles calculations, we show that three-phonon anharmonic effects intrinsic to the material can account for the observed temperature-dependence of the line-width of both the modes. It also plays an important role in determining the temperature-dependence of the frequency of the Raman modes. The observed evolution of the line-width of the A$_{1g}$ mode suggests that electron-phonon processes are additionally involved. From the analysis of the temperature-dependent Raman spectra of MoS$_2$ on two different substrates -- SiO$_2$ and hexagonal boron nitride, we disentangle the contributions of external stress and internal impurities to these phonon-related processes. We find that the renormalization of the phonon mode frequencies on different substrates is governed by strain and intrinsic doping. Our work establishes the role of intrinsic phonon anharmonic effects in deciding the Raman shift in MoS$_2$ irrespective of substrate and layer number.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
Gate- and Light-Tunable Negative Differential Resistance with High Peak Current Density in 1T-TaS$_2$/2H-MoS$_2$ T-Junction
Authors:
Mehak Mahajan,
Kausik Majumdar
Abstract:
Metal-based electronics is attractive for fast and radiation-hard electronic circuits and remains one of the longstanding goals for researchers. The emergence of 1T-TaS$_2$, a layered material exhibiting strong charge density wave (CDW) driven resistivity switching that can be controlled by an external stimulus such as electric field and optical pulses, has triggered a renewed interest in metal-el…
▽ More
Metal-based electronics is attractive for fast and radiation-hard electronic circuits and remains one of the longstanding goals for researchers. The emergence of 1T-TaS$_2$, a layered material exhibiting strong charge density wave (CDW) driven resistivity switching that can be controlled by an external stimulus such as electric field and optical pulses, has triggered a renewed interest in metal-electronics. Here we demonstrate a negative differential resistor (NDR) using electrically driven CDW phase transition in an asymmetrically designed T-junction made up of 1T-TaS$_2$/2H-MoS$_2$ van der Waals heterostructure. The principle of operation of the proposed device is governed by majority carrier transport and is distinct from usual NDR devices employing tunneling of carriers, thus avoids the bottleneck of weak tunneling efficiency in van der Waals heterojunctions. Consequently, we achieve a peak current density in excess of $10^5$ nA$μ$m$^{-2}$, which is about two orders of magnitude higher than that obtained in typical layered material based NDR implementations. The peak current density can be effectively tuned by an external gate voltage as well as photo-gating. The device is robust against ambiance-induced degradation and the characteristics repeat in multiple measurements over a period of more than a month. The findings are attractive for the implementation of active metal-based functional circuits.
△ Less
Submitted 10 August, 2020; v1 submitted 14 May, 2020;
originally announced May 2020.
-
Unified benchmarking and characterization protocol for nanomaterial-based heterogeneous photodetector technologies
Authors:
Nithin Abraham,
Kausik Majumdar
Abstract:
Over the last few years, there has been a rapid growth towards demonstrating highly sensitive, fast photodetectors using photoactive nano-materials. As with any other developing and highly inter-disciplinary field, the existing reports exhibit a large spread in the data due to less optimized materials and non-standardized characterization protocols. This calls for a streamlined performance benchma…
▽ More
Over the last few years, there has been a rapid growth towards demonstrating highly sensitive, fast photodetectors using photoactive nano-materials. As with any other developing and highly inter-disciplinary field, the existing reports exhibit a large spread in the data due to less optimized materials and non-standardized characterization protocols. This calls for a streamlined performance benchmarking requirement to accelerate technological adoption of the promising candidates. The goal of this paper is four-fold: (i) to address the key challenges to perform such benchmarking exercise; (ii) to elucidate the right figures of merit to look for, and in particular, to demonstrate that noise-equivalent-power ($N\!E\!P$) is a more reliable sensitivity metric than other commonly used ones, such as responsivity ($R$) and specific detectivity ($D^*$); (iii) to propose $N\!E\!P$ versus frequency of operation ($f$) as a single, unified benchmarking chart that could be used for apple-to-apple comparison among heterogeneous detector technologies; and (iv) to propose a simple, yet streamlined characterization protocol that can be followed while reporting photodetector performance.
△ Less
Submitted 15 May, 2020; v1 submitted 9 May, 2020;
originally announced May 2020.
-
Bharatanatyam Dance Transcription using Multimedia Ontology and Machine Learning
Authors:
Tanwi Mallick,
Patha Pratim Das,
Arun Kumar Majumdar
Abstract:
Indian Classical Dance is an over 5000 years' old multi-modal language for expressing emotions. Preservation of dance through multimedia technology is a challenging task. In this paper, we develop a system to generate a parseable representation of a dance performance. The system will help to preserve intangible heritage, annotate performances for better tutoring, and synthesize dance performances.…
▽ More
Indian Classical Dance is an over 5000 years' old multi-modal language for expressing emotions. Preservation of dance through multimedia technology is a challenging task. In this paper, we develop a system to generate a parseable representation of a dance performance. The system will help to preserve intangible heritage, annotate performances for better tutoring, and synthesize dance performances. We first attempt to capture the concepts of the basic steps of an Indian Classical Dance form, named Bharatanatyam Adavus, in an ontological model. Next, we build an event-based low-level model that relates the ontology of Adavus to the ontology of multi-modal data streams (RGB-D of Kinect in this case) for a computationally realizable framework. Finally, the ontology is used for transcription into Labanotation. We also present a transcription tool for encoding the performances of Bharatanatyam Adavus to Labanotation and test it on our recorded data set. Our primary aim is to document the complex movements of dance in terms of Labanotation using the ontology.
△ Less
Submitted 24 April, 2020;
originally announced April 2020.
-
Beat Detection and Automatic Annotation of the Music of Bharatanatyam Dance using Speech Recognition Techniques
Authors:
Tanwi Mallick,
Partha Pratim Das,
Arun Kumar Majumdar
Abstract:
Bharatanatyam, an Indian Classical Dance form, represents the rich cultural heritage of India. Analysis and recognition of such dance forms are critical for the preservation of cultural heritage. Like in most dance forms, a Bharatanatyam dancer performs in synchronization with structured rhythmic music, called Sollukattu, which comprises instrumental beats and vocalized utterances (bols) to create…
▽ More
Bharatanatyam, an Indian Classical Dance form, represents the rich cultural heritage of India. Analysis and recognition of such dance forms are critical for the preservation of cultural heritage. Like in most dance forms, a Bharatanatyam dancer performs in synchronization with structured rhythmic music, called Sollukattu, which comprises instrumental beats and vocalized utterances (bols) to create a rhythmic music structure. Computer analysis of Bharatanatyam, therefore, requires a structural analysis of Sollukattus. In this paper, we use speech processing techniques to recognize bols. Exploiting the predefined structures of Sollukattus and the detected bols, we recognize the Sollukattu. We estimate the tempo period by two methods. Finally, we generate a complete annotation of the audio signal by beat marking. For this, we also use the information of beats detected from the onset envelope of a Sollukattu signal. For training and test, we create a data set for Sollukattus and annotate them. We achieve 85% accuracy in bol recognition, 95% in Sollukattu recognition, 96% in tempo period estimation, and over 90% in beat marking. This is the maiden attempt to fully structurally analyze the music of an Indian Classical Dance form and the use of speech processing techniques for beat marking.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
Gate-tunable trion switch for excitonic device applications
Authors:
Sarthak Das,
Sangeeth Kallatt,
Nithin Abraham,
Kausik Majumdar
Abstract:
Trions are excitonic species with a positive or negative charge, and thus, unlike neutral excitons, the flow of trions can generate a net detectable charge current. Trions under favourable doping conditions can be created in a coherent manner using resonant excitation. In this work, we exploit these properties to demonstrate a gate controlled trion switch in a few-layer graphene/monolayer WS2/mono…
▽ More
Trions are excitonic species with a positive or negative charge, and thus, unlike neutral excitons, the flow of trions can generate a net detectable charge current. Trions under favourable doping conditions can be created in a coherent manner using resonant excitation. In this work, we exploit these properties to demonstrate a gate controlled trion switch in a few-layer graphene/monolayer WS2/monolayer graphene vertical heterojunction. By using a high resolution spectral scan through a temperature controlled variation of the bandgap of the WS2 sandwich layer, we obtain a gate voltage dependent vertical photocurrent strongly relying on the spectral position of the excitation, and the photocurrent maximizes when the excitation energy is resonant with the trion peak position. Further, the resonant photocurrent thus generated can be effectively controlled by a back gate voltage applied through the incomplete screening of the bottom monolayer graphene, and the photocurrent strongly correlates with the gate dependent trion intensity, while the non-resonant photocurrent exhibits only a weak gate dependence -unambiguously proving a trion driven photocurrent generation under resonance. We estimate a sub-100 fs switching time of the device. The findings are useful towards demonstration of ultra-fast excitonic devices in layered materials.
△ Less
Submitted 23 March, 2020;
originally announced March 2020.
-
Origin of selective enhancement of sharp defect emission lines in monolayer WSe$_2$ on rough metal substrate
Authors:
Raghav Chaudhary,
Varun Raghunathan,
Kausik Majumdar
Abstract:
The defect states in atomically thin layers of transition metal dichalcogenides are promising candidates for single photon emission. However, the brightness of such quantum emission is often weak, and is accompanied with undesirable effects like spectral diffusion and strong background emission. By placing a monolayer WSe$_2$ directly on a rough gold substrate, here we show a selective enhancement…
▽ More
The defect states in atomically thin layers of transition metal dichalcogenides are promising candidates for single photon emission. However, the brightness of such quantum emission is often weak, and is accompanied with undesirable effects like spectral diffusion and strong background emission. By placing a monolayer WSe$_2$ directly on a rough gold substrate, here we show a selective enhancement of sharp defect-bound exciton peaks, coupled with a suppressed spectral diffusion and strong quenching of background luminescence. By combining the experimental data with detailed electromagnetic simulations, we reveal that such selective luminescence enhancement originates from a combination of the Purcell effect and a wavelength dependent increment of the excitation electric field at the tips of tall rough features, coupled with a localized strain induced exciton funneling effect. Notably, insertion of a thin hexagonal Boron Nitride (hBN) sandwich layer between WSe$_2$ and the Au film results in a strong enhancement of the background luminescence, obscuring the sharp defect peaks. The findings demonstrate a simple strategy of using monolayer WSe$_2$ supported by thin metal film that offers a possibility of achieving quantum light sources with high purity, high brightness, and suppressed spectral diffusion.
△ Less
Submitted 21 March, 2020;
originally announced March 2020.
-
Spectrally tunable, large Raman enhancement from nonradiative energy transfer in van der Waals heterostructure
Authors:
Medha Dandu,
Kenji Watanabe,
Takashi Taniguchi,
Ajay K. Sood,
Kausik Majumdar
Abstract:
Raman enhancement techniques are essential for fundamental studies in light-matter interactions and find widespread application in microelectronics, bio-chemical sensing, and clinical diagnosis. Two-dimensional (2D) materials and their van der Waals heterostructures (vdWHs) are emerging rapidly as potential platforms for Raman enhancement. Here, we experimentally demonstrate a new technique of Ram…
▽ More
Raman enhancement techniques are essential for fundamental studies in light-matter interactions and find widespread application in microelectronics, bio-chemical sensing, and clinical diagnosis. Two-dimensional (2D) materials and their van der Waals heterostructures (vdWHs) are emerging rapidly as potential platforms for Raman enhancement. Here, we experimentally demonstrate a new technique of Raman enhancement driven by nonradiative energy transfer (NRET) achieving a $10$-fold enhancement in the Raman intensity in a vertical vdWH comprising of a monolayer transition metal dichalcogenide (1L-TMD) placed on a multilayer SnSe\tsub2. Consequently, several weak Raman peaks become visible which are otherwise imperceptible. We also show a strong modulation of the enhancement factor by tuning the spectral overlap between the 1L-TMD and SnSe\tsub2 through temperature variation and the results are in remarkable agreement with a Raman polarizability model capturing the effect of NRET. The observed NRET driven Raman enhancement is a novel mechanism which has not been experimentally demonstrated thus far and is distinct from conventional surface (SERS), tip (TERS) or Interference enhanced Raman scattering (IERS) mechanisms that are driven solely by charge transfer or electric field enhancement. The mechanism can also be used in synergy with plasmonic nanostructures to achieve additional selectivity and sensitivity beyond hot spot engineering for applications like molecular detection using 2D/molecular hybrids. Our results open new avenues for engineering Raman enhancement techniques coupling the advantages of uniform enhancement accessible across a wide junction area in vertical vdWHs.
△ Less
Submitted 21 March, 2020;
originally announced March 2020.
-
ARIADNE -- A Novel Optical LArTPC: Technical Design Report and Initial Characterisation using a Secondary Beam from the CERN PS and Cosmic Muons
Authors:
D. Hollywood,
K. Majumdar,
K. Mavrokoridis,
K. J. McCormick,
B. Philippou,
S. Powell,
A. Roberts,
N. A. Smith,
G. Stavrakis,
C. Touramanis,
J. Vann
Abstract:
ARIADNE is a 1-ton (330 kg fiducial mass) dual-phase liquid argon (LAr) time projection chamber (TPC) featuring a novel optical readout. Four electron-multiplying charge-coupled device (EMCCD) cameras are mounted externally, and these capture the secondary scintillation light produced in the holes of a thick electron gas multiplier (THGEM). Track reconstruction using this novel readout approach is…
▽ More
ARIADNE is a 1-ton (330 kg fiducial mass) dual-phase liquid argon (LAr) time projection chamber (TPC) featuring a novel optical readout. Four electron-multiplying charge-coupled device (EMCCD) cameras are mounted externally, and these capture the secondary scintillation light produced in the holes of a thick electron gas multiplier (THGEM). Track reconstruction using this novel readout approach is demonstrated. Optical readout has the potential to be a cost effective alternative to charge readout in future LArTPCs. In this paper, the technical design of the detector is detailed. Results of mixed particle detection using a secondary beam from the CERN PS (representing the first ever optical images of argon interactions in a dual-phase LArTPC at a beamline) and cosmic muon detection at the University of Liverpool are also presented.
△ Less
Submitted 3 March, 2020; v1 submitted 8 October, 2019;
originally announced October 2019.
-
Posture and sequence recognition for Bharatanatyam dance performances using machine learning approach
Authors:
Tanwi Mallick,
Partha Pratim Das,
Arun Kumar Majumdar
Abstract:
Understanding the underlying semantics of performing arts like dance is a challenging task. Dance is multimedia in nature and spans over time as well as space. Capturing and analyzing the multimedia content of the dance is useful for the preservation of cultural heritage, to build video recommendation systems, to assist learners to use tutoring systems. To develop an application for dance, three a…
▽ More
Understanding the underlying semantics of performing arts like dance is a challenging task. Dance is multimedia in nature and spans over time as well as space. Capturing and analyzing the multimedia content of the dance is useful for the preservation of cultural heritage, to build video recommendation systems, to assist learners to use tutoring systems. To develop an application for dance, three aspects of dance analysis need to be addressed: 1) Segmentation of the dance video to find the representative action elements, 2) Matching or recognition of the detected action elements, and 3) Recognition of the dance sequences formed by combining a number of action elements under certain rules. This paper attempts to solve three fundamental problems of dance analysis for understanding the underlying semantics of dance forms. Our focus is on an Indian Classical Dance (ICD) form known as Bharatanatyam. As dance is driven by music, we use the music as well as motion information for key posture extraction. Next, we recognize the key postures using machine learning as well as deep learning techniques. Finally, the dance sequence is recognized using the Hidden Markov Model (HMM). We capture the multi-modal data of Bharatanatyam dance using Kinect and build an annotated data set for research in ICD.
△ Less
Submitted 24 September, 2019;
originally announced September 2019.
-
Highly Sensitive, Fast Graphene Photodetector with Responsivity $>10^6$ A/W Using Floating Quantum Well Gate
Authors:
Krishna Murali,
Nithin Abraham,
Sarthak Das,
Sangeeth Kallatt,
Kausik Majumdar
Abstract:
Graphene, owing to its zero bandgap electronic structure, is promising as an absorption material for ultra-wideband photodetection applications. However, graphene-absorption based detectors inherently suffer from poor responsivity due to weak absorption and fast photocarrier recombination, limiting their viability for low intensity light detection. Here we use a graphene/WS$_2$/MoS$_2$ vertical he…
▽ More
Graphene, owing to its zero bandgap electronic structure, is promising as an absorption material for ultra-wideband photodetection applications. However, graphene-absorption based detectors inherently suffer from poor responsivity due to weak absorption and fast photocarrier recombination, limiting their viability for low intensity light detection. Here we use a graphene/WS$_2$/MoS$_2$ vertical heterojunction to demonstrate a highly sensitive photodetector, where the graphene layer serves dual purpose, namely as the light absorption layer, and also as the carrier conduction channel, thus maintaining the broadband nature of the photodetector. A fraction of the photoelectrons in graphene encounter ultra-fast inter-layer transfer to a floating monolayer MoS$_2$ quantum well providing strong quantum confined photogating effect. The photodetector shows a responsivity of $4.4\times 10^6$ A/W at 30 fW incident power, outperforming photodetectors reported till date where graphene is used as light absorption material by several orders. In addition, the proposed photodetector exhibits an extremely low noise equivalent power ($N\!E\!P$) of $<4$ fW/$\sqrt{Hz}$ and a fast response ($\sim$ milliseconds) with zero reminiscent photocurrent. The findings are attractive towards the demonstration of graphene-based highly sensitive, fast, broadband photodetection technology.
△ Less
Submitted 19 August, 2019;
originally announced August 2019.