Newsgroups: comp.robotics
Path: brunix!cat.cis.Brown.EDU!agate!howland.reston.ans.net!math.ohio-state.edu!magnus.acs.ohio-state.edu!csn!usa.net!striker
From: striker@cscns.com (Douglas H. Burns)
Subject: Re: need membrane keyboard manufacturer
Message-ID: <Cu6zKv.J76@usa.net>
Sender: news@usa.net (News)
Nntp-Posting-Host: cns
Organization: Internet Express (800-592-1240 customer service)
X-Newsreader: TIN [version 1.2 PL2]
References: <31o4ff$b36@usenet.rpi.edu>
Distribution: usa
Date: Mon, 8 Aug 1994 01:17:18 GMT
Lines: 17

Michael Ali (ali@cat.rpi.edu) wrote:

: I am trying to make a simple contact/no contact sensor for
: a fingertip for a robot hand.  I have had some success with 
: using part of an old membrane keypad I had lying around
: (actually it was the keypad from a "Big Trak").  I would like
: to find a manufacturer of these keypads from whom I can order
: some samples.  If anyone has any leads please post this newsgroup
: or directly to me (ali@cat.rpi.edu).

: Thanks in advance,

: --mike ali

Mike, a great source of manufacturers of just about anything is Thomas's 
Industry Register, a resource you can most likely find in the public lib.
	Doug
