Newsgroups: comp.robotics
Path: brunix!cat.cis.Brown.EDU!agate!howland.reston.ans.net!math.ohio-state.edu!sdd.hp.com!hplabs!hplntx!baer
From: baer@hplwave.hpl.hp.com (Rick Baer 7505)
Subject: hobby servo motors
Sender: news@hpl.hp.com (HPLabs Usenet Login)
Message-ID: <Ctyv0J.BKI@hpl.hp.com>
Date: Wed, 3 Aug 1994 15:57:54 GMT
Nntp-Posting-Host: hplwave.hpl.hp.com
Organization: Hewlett-Packard Laboratories, Palo Alto, CA
X-Newsreader: TIN [version 1.2 PL2]
Lines: 16

 What sort of signals are required to drive the servo motors used in model
cars and planes?  I have one that specifies a 4.8 volt power supply and
positive pulse control (1520 us neutral).  Three leads (red, black, white)
are attached to the motor.  I had expected to find something like 5 leads
(3 for the potentiometer and 2 for the motor).  Thanks in advance for your
help! 

--

====================================
==  Rick Baer                     ==
==  Chemical Systems Department   ==
==  Hewlett-Packard Laboratories  ==
==  baer@hpl.hp.com               ==
====================================

