Newsgroups: comp.robotics
Path: brunix!news.Brown.EDU!noc.near.net!howland.reston.ans.net!darwin.sura.net!news.Vanderbilt.Edu!news
From: HEAGYWS@ctrvax.Vanderbilt.Edu ()
Subject: Re: Mounting wheels to small shafts?
In-Reply-To: mcintyre@vnet.ibm.com's message of Wed, 23 Jun 1993 23:06:45 GMT
Message-ID: <1993Jun24.040751.6238@news.vanderbilt.edu>
Sender: news@news.vanderbilt.edu
Nntp-Posting-Host: ctrvax.vanderbilt.edu
Organization: Vanderbilt University
References:  <C93K79.szC@hawnews.watson.ibm.com>
Date: Thu, 24 Jun 1993 04:07:51 GMT
X-News-Reader: VMS NEWS 1.24
Lines: 8

In <C93K79.szC@hawnews.watson.ibm.com> mcintyre@vnet.ibm.com writes:

Try laying a piece of thin material (ie. thin rubber) over the hole
on the wheel and simply press fitting the motor shaft into the hole.

Win
heagyws@ctrvax.vanderbilt.edu

