1.
|
|
2.
|
Developing the technique of measurements of magnetic field in the CMS steel yoke elements with flux-loops and Hall probes
/ Klioukhine, V I ; Campi, D ; Curé, B ; Gaddi, A ; Gerwig, H ; Grillet, J P ; Hervé, A ; Loveless, R ; Smith, R P
CMS (Compact Muon Solenoid) is a general-purpose detector designed to run at the highest luminosity at the CERN Large Hadron Collider (LHC) . Its distinctive features include a 4 T superconducting solenoid with 6 m diameter by 12.5 m long free bore, enclosed inside a 10000- ton return yoke. [...]
2004
In : 50th IEEE 2003 Nuclear Science Symposium, Medical Imaging Conference, 13th International Workshop on Room Temperature Semiconductor Detectors and Symposium on Nuclear Power Systems, Portland, OR, USA, 19 - 25 Oct 2003, pp.1100-4 (Vol.2)
|
|
3.
|
Developing the Technique of Measurements of Magnetic Field in the CMS Steel Yoke Elements With Flux-Loops and Hall Probes
/ Klyukhin, V.I. (Moscow State U.) ; Campi, D. (CERN) ; Cure, B. (CERN) ; Gaddi, A. (CERN) ; Gerwig, H. (CERN) ; Grillet, J.P. (CERN) ; Herve, Alain (CERN) ; Loveless, R. (Wisconsin U., Madison) ; Smith, R.P. (Fermilab)
Compact muon solenoid (CMS) is a general-purpose detector designed to run at the highest luminosity at the CERN large hadron collider (LHC). Its distinctive features include a 4 T superconducting solenoid with 6 m diameter by 12.5 m long free bore, enclosed inside a 10000-ton return yoke made of construction steel. [...]
arXiv:1109.6465.-
2011 - 6 p.
- Published in : IEEE Trans. Nucl. Sci. 51 (2004) 2187-2192
Fulltext: PDF; External link: Preprint
In : 13th IEEE-NPSS Real Time Conference 2003, Montreal, Canada, 18 - 23 May 2003, pp.2187-2192
|
|
4.
|
Analysis of eddy current distributions in the CMS magnet yoke during the solenoid discharge
/ Klyukhin, V.I. (SINP, Moscow ; CERN) ; Campi, D. (CERN) ; Curé, B. (CERN) ; Gaddi, A. (CERN) ; Gerwig, H. (CERN) ; Grillet, J.P. (CERN) ; Hervé, Alain (CERN) ; Loveless, R. (Wisconsin U., Madison) ; Smith, R.P. (Fermilab)
Flux loops have been installed on selected segments of the magnetic flux return yoke of the 4 T superconducting coil of the Compact Muon Solenoid (CMS) detector under construction at CERN. Voltages induced in the loops during discharge of the solenoid will be sampled online during the entire discharge and integrated offline to provide a measurement of the initial magnetic flux density in steel at the maximum field to an accuracy of a few percent. [...]
arXiv:1109.6897; FERMILAB-CONF-04-539-E.-
2011 - 4 p.
- Published in : IEEE Trans. Nucl. Sci. 52 (2005) 741-744
IEEE Published version: PDF; External link: PDF; Fulltext: fermilab-conf-04-539-e - PDF; arXiv:1109.6897 - PDF; External link: Fermilab Library Server (fulltext available)
|
|
5.
|
Using the Standard Linear Ramps of the CMS Superconducting Magnet for Measuring the Magnetic Flux Density in the Steel Flux Return Yoke
/ Klyukhin, Vyacheslav (SINP, Moscow ; CERN) ; Curé, Benoit (CERN) ; Amapane, Nicola (INFN, Turin) ; Ball, Austin (CERN) ; Gaddi, Andrea (CERN) ; Gerwig, Hubert (CERN) ; Herve, Alain (Wisconsin U., Madison) ; Loveless, Richard (Wisconsin U., Madison) ; Mulders, Martijn (CERN)
The principal difficulty in large magnetic systems having an extensive flux return yoke is to characterize the magnetic flux distribution in the yoke steel blocks. Continuous measurements of the magnetic flux density in the return yoke are not possible and the usual practice uses software modelling of the magnetic system with special three-dimensional (3-D) computer programs. [...]
arXiv:2201.07557; CMS-CR-2018-121; Report-no: CMS CR-2018/121.-
Geneva : CERN, 2018-09-26 - 4 p.
- Published in : IEEE Trans. Magn. 55 (2018) 8300504
Fulltext: CR2018_121 - PDF; 2201.07557 - PDF; Fulltext from publisher: PDF;
In : International Conference on Magnetism, San Francisco, CA, 15-20 Jul 2018
|
|
6.
|
Measuring the Magnetic Flux Density in the CMS Steel Yoke
/ Klyukhin, V.I. (SINP, Moscow) ; Amapane, N. (INFN, Turin ; Turin U.) ; Ball, A. (CERN) ; Cure, B. (CERN) ; Gaddi, A. (CERN) ; Gerwig, H. (CERN) ; Mulders, M. (CERN) ; Herve, A. (Wisconsin U., Madison) ; Loveless, R. (Wisconsin U., Madison)
The Compact Muon Solenoid (CMS) is a general purpose detector, designed to run at the highest luminosity at the CERN Large Hadron Collider (LHC). Its distinctive features include a 4 T superconducting solenoid with 6-m-diameter by 12.5-m-length free bore, enclosed inside a 10000-ton return yoke made of construction steel. [...]
arXiv:1212.1657.-
2012 - 9 p.
- Published in : J. Supercond. Novel Magn. 26 (2012) 1967
Preprint: PDF; External link: Preprint
In : International Conference on Superconductivity and Magnetism, Istanbul, Turkey, 29 Apr - 4 May 2012, pp.1967
|
|
7.
|
Measurement of the CMS Magnetic Field
/ Klyukhin, V.I. (SINP, Moscow ; CERN) ; Ball, A. (CERN) ; Bergsma, F. (CERN) ; Campi, D. (CERN) ; Cure, B. (CERN) ; Gaddi, A. (CERN) ; Gerwig, H. (CERN) ; Herve, A. (CERN) ; Korienek, J. (Fermilab) ; Linde, F. (NIKHEF, Amsterdam) et al.
The measurement of the magnetic field in the tracking volume inside the superconducting coil of the Compact Muon Solenoid (CMS) detector under construction at CERN is done with a fieldmapper designed and produced at Fermilab. The fieldmapper uses 10 3-D B-sensors (Hall probes) developed at NIKHEF and calibrated at CERN to precision 0.05% for a nominal 4 T field. [...]
arXiv:1110.0306.-
2008-06-06 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 18 (2008) 395-398
Fulltext: PDF; IEEE Published version, local copy: PDF;
In : 20th International Conference on Magnet Technology, Philadelphia, PA, USA, 27 - 31 Aug 2007, pp.395-398
|
|
8.
|
Development of the CMS Magnetic Field Map
/ Amapane, Nicola (INFN, Turin ; Turin U.) ; Klyukhin, Vyacheslav (SINP, Moscow ; CERN)
This article focuses on pioneering work on the performance of the three-dimensional (3D) magnetic field map in the entire volume of the Compact Muon Solenoid (CMS) detector at the Large Hadron Collider at CERN. In the CMS heterogeneous magnetic system, the magnetic flux is created by a superconducting solenoid coil enclosed in a steel flux-return yoke. [...]
arXiv:2401.01913.-
2023-05-06 - 12 p.
- Published in : Symmetry 15 (2023) 1030
Fulltext: 2401.01913 - PDF; document - PDF;
|
|
9.
|
Measuring the Magnetic Flux Density with Flux Loops and Hall Probes in the CMS Magnet Flux Return Yoke
/ Curé, B. (CERN) ; Amapane, N. (INFN, Turin) ; Ball, A. (CERN) ; Gaddi, A. (CERN) ; Gerwig, H. (CERN) ; Hervé, A. (Wisconsin U., Madison) ; Klyukhin, V.I. (Lomonosov Moscow State U.) ; Loveless, R. (Wisconsin U., Madison) ; Mulders, M. (CERN)
The Compact Muon Solenoid (CMS) is a general purpose detector, designed to run at the highest luminosity at the CERN Large Hadron Collider (LHC). Its distinctive features include a 4 T superconducting solenoid with 6-m-diameter by 12.5-m-length free bore, enclosed inside a 10,000-ton return yoke made of construction steel. [...]
arXiv:1611.02299.-
2016-10 - 3 p.
- Published in : 10.1109/NSSMIC.2016.8069888
External link: Preprint
In : IEEE Nuclear Science Symposium and Medical Imaging Conference, Strasbourg, France, 29 Oct - 6 Nov 2016
|
|
10.
|
The CMS Magnetic Field Measuring and Monitoring Systems
/ Klyukhin, Vyacheslav (SINP, Moscow ; CERN) ; Ball, Austin (CERN) ; Bergsma, Felix (CERN) ; Boterenbrood, Henk (NIKHEF, Amsterdam) ; Curé, Benoit (CERN) ; Dattola, Domenico (INFN, Turin ; Polytech. Turin) ; Gaddi, Andrea (CERN) ; Gerwig, Hubert (CERN) ; Hervé, Alain (Wisconsin U., Madison) ; Loveless, Richard (Wisconsin U., Madison) et al.
This review article describes the performance of the magnetic field measuring and monitoring systems for the Compact Muon Solenoid (CMS) detector. To cross-check the magnetic flux distribution obtained with the CMS magnet model, four systems for measuring the magnetic flux density in the detector volume were used. [...]
arXiv:2202.02562; FERMILAB-PUB-22-063-PPD.-
2022-01-15 - 22 p.
- Published in : Symmetry 14 (2022) 169
Fulltext: jt - PDF; 2202.02562 - PDF; Fulltext from Publisher: PDF; External link: Fermilab Library Server
|
|