CERN Accelerating science

CERN Document Server 找到 8 笔记录  检索需时 0.70 秒. 
1.
The Inner Triplet String Facility for HL-LHC: Design and Planning / Bajko, Marta (CERN) ; Bertolasi, Stefano (CERN) ; Bertone, Caterina (CERN) ; Blanchard, Sebastien (CERN) ; Bozzini, Davide (CERN) ; Brüning, Oliver (CERN) ; Cruikshank, Paul (CERN) ; De Luca, Davide (CERN) ; Dos Santos, Nuno (CERN) ; Dragoni, Francesco (CERN) et al.
In the framework of the HL-LHC project, full-scale integration and operational tests of the superconducting magnet chain, from the inner triplet quadrupoles up to the first separation/recombination dipole, are planned in conditions as similar as possible to the final set-up in the LHC tunnel. The IT String includes all of the required systems for operation at nominal conditions, such as vacuum, cryogenics, warm and cold powering equipment, and protection systems. [...]
Geneva : JACoW, 2021 - 4 p. - Published in : JACoW IPAC 2021 (2021) 3592-3595 Fulltext: PDF;
In : 12th International Particle Accelerator Conference (IPAC 2021), Online, 24 - 28 May 2021, pp.3592-3595
2.
Mechanical Structure for the PSI Canted-Cosine-Theta (CCT) Magnet Program / Montenero, Giuseppe (PSI, Villigen) ; Auchmann, Bernhard (CERN) ; Brouwer, Lucas (LBL, Berkeley) ; Calzolaio, Ciro (PSI, Villigen) ; Caspi, Shlomo (LBL, Berkeley) ; Rolando, Gabriella (PSI, Villigen) ; Sanfilippo, Stephane (PSI, Villigen)
Abstract: The Canted-Cosine-Theta (CCT) technology has the potential, by its intrinsic stress-management, to lower coil stresses in high-field accelerator magnets. This is especially relevant for Nb3Sn magnets, which may be subject to irreversible degradation if the coil stresses exceed critical values. [...]
2017 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4002805
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4002805
3.
Electromechanical Design of a 16-T CCT Twin-Aperture Dipole for FCC / Auchmann, Bernhard (CERN) ; Brouwer, Lucas (LBL, Berkeley) ; Caspi, Shlomo (LBL, Berkeley) ; Gao, Jiani (PSI, Villigen) ; Montenero, Giuseppe (PSI, Villigen) ; Negrazus, Marco (PSI, Villigen) ; Rolando, Gabriella (CERN) ; Sanfilippo, Stéphane (PSI, Villigen)
Canted-cosine-theta (CCT) technology has been studied for its suitability for a future-circular-collider (FCC) main dipole in terms of magnetic and mechanical performance, electrothermal protectability, as well as efficiency. In this paper, we present lessons learnt from our search for efficient CCT solutions by means of two-dimensional (2-D) magnetic and mechanical simulations, discuss the 3-D periodic mechanical model, as well as 3-D electromagnetic analysis of the end regions. [...]
2017 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 28 (2017) 4000705
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4000705
4.
New and Optimized Magnetization Scheme for the Baby Magnetized Iron Neutrino Detector at J-PARC / Rolando, Gabriella (CERN) ; Benoit, Philippe (CERN) ; Blondel, Alain (Geneva U.) ; Dudarev, Alexey (CERN) ; Noah, Etam (Geneva U.) ; Pais Da Silva, Helder (CERN) ; Rayner, Mark (Geneva U.) ; ten Kate, Herman H J (CERN)
The Baby-MIND (magnetized iron neutrino detector) collaboration is building a muon detector to be installed downstream of the WAGASCI experiment at J-PARC (Japan). Due to the challenging timeline and space constraints for the installation in the ND280 pit, an innovative magnetization scheme has been developed for the iron plates. [...]
2017 - 6 p. - Published in : IEEE Trans. Magn. 53 (2017) 8000706
5.
Design of 4 Tm Forward Dipoles for the FCC-hh Detector Magnet System / Mentink, Matthias (CERN) ; Pais Da Silva, Helder (CERN) ; Dudarev, Alexey (CERN) ; Rolando, Gabriella (CERN) ; Cure, Benoit (CERN) ; Gaddi, Andrea (CERN) ; Klyukhin, Vyacheslav (CERN) ; Gerwig, Hubert (CERN) ; Wagner, Udo (CERN) ; Ten Kate, Herman (CERN)
The 4 T, 10 m free bore twin Solenoid with 4 Tm forward dipoles is discussed with an emphasis on the forward dipoles. This assembly, a possible detector magnet layout for the future circular collider for hadron-hadron physics, combines a 4 T axial magnetic field at the interaction point in the center of the twin Solenoid with off-axis magnetic fields generated by the two forward dipoles for the purpose of providing bending power to all particles emanating from the interaction point. [...]
2017 - 6 p. - Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4500306
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4500306
6.
Design of a 56-GJ Twin Solenoid and Dipoles Detector Magnet System for the Future Circular Collider / Mentink, Matthias (CERN) ; Dudarev, Alexey (CERN) ; Pais Da Silva, Helder Filipe (CERN) ; Berriaud, Christophe Paul (Saclay ; CERN) ; Rolando, Gabriella (CERN) ; Pots, Rosalinde (CERN) ; Cure, Benoit (CERN) ; Gaddi, Andrea (CERN) ; Klyukhin, Vyacheslav (CERN) ; Gerwig, Hubert (CERN) et al.
An aggressive low-mass and high-stress design of a very large detector magnet assembly for the Future Circular Collider (FCC-hh), consisting of a “twin solenoid” and two dipoles, is presented. The twin solenoid features two concentric solenoids. [...]
2016 - 6 p. - Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4003506
In : 12th European Conference on Applied Superconductivity, Lyon, France, 06 - 10 Sep 2015, pp.4003506
7.
Iron-free detector magnet options for the future circular collider / Mentink, Matthias (CERN) ; Dudarev, Alexey (CERN) ; Pais Da Silva, Helder Filipe (CERN) ; Rolando, Gabriella (CERN) ; Cure, Benoit (CERN) ; Gaddi, Andrea (CERN) ; Klyukhin, Slava (Lomonosov Moscow State U.) ; Gerwig, Hubert (CERN) ; Wagner, Udo (CERN) ; Ten Kate, Herman (CERN)
In this paper, several iron-free solenoid-based designs of a detector magnet for the future circular collider for hadron-hadron collisions (FCC-hh) are presented. The detector magnet designs for FCC-hh aim to provide bending power for particles over a wide pseudorapidity range (0 ≤ jηj ≤ 4). [...]
CERN-ACC-2016-0335.- Geneva : CERN, 2016 - 10 p. - Published in : Phys. Rev. Accel. Beams 19 (2016) 111001 APS Open Access article: PDF;
In : 2nd Annual Meeting of the Future Circular Collider study 2016, Rome, Italy, 11 - 15 Apr 2016
8.
Fast Dump of the ATLAS Toroids / Dudarev, A (CERN) ; Rolando, Gabriella (Univ Turin, I-10121 Turin, Italy.) ; Volpini, Giovanni (INFN, LASA Lab, I-20090 Milan, Italy.) ; Dudarev, Alexey (CERN) ; Kate, Herman Ten (CERN)
The toroidal magnet system of the ATLAS Detector at CERN consists of a Barrel Toroid (BT) and two End Cap Toroids (ECT-A and ECT-C). Each toroid is built up from eight racetrack coils wound with an aluminum stabilized NbTi conductor and indirectly cooled by forced flow liquid helium. [...]
2010 - Published in : IEEE Trans. Appl. Supercond. 20 (2010) 148-151 IEEE Published version, local copy: PDF;
In : 21st International Conference on Magnet Technology, Hefei, China, 18 - 23 Oct 2009, pp.148-151

参见:相似的作者
10 Rolando, G
7 Rolando, G.
您想得到有关这检索条件的最新结果吗?
建立您的 电邮警报 或订阅 RSS feed.
没有寻找到什么? 尝试在以下的服务器查寻:
Rolando, Gabriella 在 Amazon
Rolando, Gabriella 在 CERN EDMS
Rolando, Gabriella 在 CERN Intranet
Rolando, Gabriella 在 CiteSeer
Rolando, Gabriella 在 Google Books
Rolando, Gabriella 在 Google Scholar
Rolando, Gabriella 在 Google Web
Rolando, Gabriella 在 IEC
Rolando, Gabriella 在 IHS
Rolando, Gabriella 在 INSPIRE
Rolando, Gabriella 在 ISO
Rolando, Gabriella 在 KISS Books/Journals
Rolando, Gabriella 在 KISS Preprints
Rolando, Gabriella 在 NEBIS
Rolando, Gabriella 在 SLAC Library Catalog
Rolando, Gabriella 在 Scirus