CERN Accelerating science

LHCb Note
Report number	LHCb-2000-036
Title	The hadron calorimeter prototype beam-test results
Author(s)	Coca, C (Bucharest, IFIN-HH) ; Preda, T (Bucharest, IFIN-HH) ; Rosca, A (Bucharest, IFIN-HH) ; Ajinenko, I (Serpukhov, IHEP) ; Dorokhov, A E (Serpukhov, IHEP) ; Dzhelyadin, R I (Serpukhov, IHEP) ; Konoplyannikov, A K (Serpukhov, IHEP) ; Matveev, V (Serpukhov, IHEP) ; Novikov, V (Serpukhov, IHEP) ; Yushchenko, O P (Serpukhov, IHEP) ; Ranyuk, Y (Kharkov, KIPT)
Series	(CALO)
Submitted by	[email protected] on 10 Oct 2000
Subject category	Detectors and Experimental Techniques
Note type
Accelerator/Facility, Experiment	CERN LHC ; LHCb
Abstract	Here We present here the beam-test results obtained with the HCAL Prototype exposed on the X7 beam line of the CERN SPS accelerator. The iron plate: - scintillator tile sampling calorimeter has been tested in the bearn momenta range 10 = 80 GeV/c. The measured energy, angular and coordinate dependences of the HCAL responce and resolution were found to be corresponding to the LHCb design requirements. The angular and X-Y coordinate uniformity have been checked and compared with stand-alone Monte-Carlo simulation program predictions. The radioactive source calibration procedure has been developed. The LED pulse system allows to monitor the short-term stability of the detector. New 40 MHz front-end electronics have been tested and compared with ordinary charge integrating ADC's. The results of the first combined calorimeter tests are also presented. The signal shapes have been studied for FICA L., instrumented with different fiber types and were found to satisfy the I,IICb performance requirements.
Copyright/License	Preprint: (License: CC-BY-4.0)

Corresponding record in: Inspire