CERN Accelerating science

Article
Title CERN Super Proton Synchrotron Radiation Environment and Related Radiation Hardness Assurance Implications
Author(s) Biłko, Kacper (CERN ; Lab. Hubert Curien, St. Etienne) ; García Alía, Rubén (CERN) ; Di Francesca, Diego (CERN) ; Aguiar, Ygor (CERN) ; Danzeca, Salvatore (CERN) ; Gilardoni, Simone (CERN) ; Girard, Sylvain (Lab. Hubert Curien, St. Etienne) ; Esposito, Luigi Salvatore (CERN) ; Fraser, Matthew Alexander (CERN) ; Mazzola, Giuseppe (CERN) ; Ricci, Daniel (CERN) ; Sebban, Marc (Lab. Hubert Curien, St. Etienne) ; Velotti, Francesco Maria (CERN)
Publication 2023
Number of pages 10
In: IEEE Trans. Nucl. Sci. 70, 8 (2023) pp.1606-1615
In: Conference on Radiation and its Effects on Components and Systems (RADECS 2023), Toulouse, France, 25 - 29 Sep 2023, pp.1606-1615
DOI 10.1109/TNS.2023.3261181
Subject category Accelerators and Storage Rings ; Detectors and Experimental Techniques
Accelerator/Facility, Experiment CERN SPS
Abstract The super proton synchrotron (SPS) is the second largest accelerator at CERN where protons are accelerated between 16 and 450 GeV/c. Beam losses, leading to the mixed-field radiation of up to MGy magnitude, pose a threat to the reliability of the electronic equipment and polymer materials located in the tunnel and its vicinity. In particular, in the arc sectors, where both main magnets and radiation sensors are periodically arranged, the total ionizing dose (TID) is of concern for the front-end electronics of a logarithmic position system (ALPS). The SPS is equipped with multiple radiation detection systems, such as beam loss monitors (BLMs), RadMons, and as of 2021, the distributed optical fiber radiation sensor (DOFRS) that combined all together provides a very comprehensive picture of both the TID spatial distribution and its time evolution. Within this study, the overview of measured 2021 and 2022 TID levels is presented, together with the demonstration of capabilities offered by the different radiation monitors. The DOFRS, supported by the passive radiophotoluminescence (RPL) dosimeter measurements, is used to assess the TID values directly at the electronic racks, which turned out to be reaching several tens of Gy/year, potentially affecting the ALPS lifetime.
Copyright/License publication: (License: CC-BY-4.0)

Corresponding record in: Inspire
 Запись создана 2023-10-10, последняя модификация 2023-10-18


Полный текст:
Загрузка полного текста
PDF