CERN Accelerating science

ATLAS Slides
Report number	ATL-DAQ-SLIDE-2023-546
Title	FELIX Phase II
Author(s)	Schreuder, Frans (Nikhef National institute for subatomic physics (NL))
Corporate author(s)	The ATLAS collaboration
Collaboration	ATLAS Collaboration
Submitted by	[email protected] on 05 Oct 2023
Subject category	Particle Physics - Experiment
Accelerator/Facility, Experiment	CERN LHC ; ATLAS
Free keywords	ATLAS ; FELIX ; DAQ
Abstract	The FELIX system has been introduced as a readout system for ATLAS in LHC Run 3, for a subset of the ATLAS subdetectors. An evolved version of FELIX will be deployed in Run 4 (2029 – 2032) and will serve all ATLAS subdetectors. The FELIX system will be comprised of about 300 servers, each equipped with custom PCIe FELIX cards and a 400 GbE network interface. The system will receive detector data at the rate of 1 MHz for a total throughput of 4.6 TB/s. The FELIX PCIe card for Run 4 , called FLX-182, is equipped with with a Xilinx Versal Prime VM1802 FGPA/SoC, a PCIe Gen4x16 interface and 24 optical links that operate up to 25 Gb/s to interact with the Frontend electronics. The FLX-182 runs FELIX firmware which has been redesigned and upgraded to deal with the higher data- and trigger rates, as well as newly added communication protocols for the subdetectors in ATLAS. The firmware design has passed a preliminary design review in January 2022. The primary goals of the FELIX firmware are to decode and transfer the data from the Front-ends into the host server memory and to receive and distribute precise timing, trigger and control information. The software running on the FELIX server will also be upgraded to deal with the increased data and trigger rates.