CERN Accelerating science

Published Articles
Title The experimental setup of the Interaction in Crystals for Emission of RADiation collaboration at Mainzer Mikrotron: Design, commissioning, and tests
Author(s) Lietti, D (Insubria U., Como) ; Backe, H (Mainz U., Inst. Kernphys.) ; Bagli, E (Ferrara U. ; INFN, Ferrara) ; Bandiera, L (Ferrara U. ; INFN, Ferrara) ; Berra, A (Insubria U., Como ; INFN, Milan Bicocca) ; Carturan, S (Padua U. ; INFN, Legnaro) ; De Salvador, D (Padua U. ; INFN, Legnaro) ; Germogli, G (Ferrara U. ; INFN, Ferrara) ; Guidi, V (Ferrara U. ; INFN, Ferrara) ; Lauth, W (Mainz U., Inst. Kernphys.) ; Mazzolari, A (Ferrara U. ; INFN, Ferrara) ; Prest, M (Insubria U., Como ; INFN, Milan Bicocca) ; Vallazza, E (INFN, Trieste)
Publication AIP, 2015
Number of pages 10
In: Rev. Sci. Instrum. 86 (2015) 045102
DOI 10.1063/1.4916367
Subject category Detectors and Experimental Techniques
Accelerator/Facility, Experiment CERN PS ; nTOF
Abstract Silicon/germanium flat/bent crystals are thin devices able to efficiently deflect charged particle GeV-energy beams up to a few hundreds of μrad; moreover, high intensity photons can be efficiently produced in the so-called Multi-Volume Reflection (MVR) and Multiple Volume Reflections in One Crystal (MVROC) conditions. In the last years, the research interest in this field has moved to the dynamic studies of light negative leptons in the low energy range: the possibility to deflect negative particles and to produce high intensity γ sources via the coherent interactions with crystals in the sub-GeV energy range has been proved by the ICE-RAD (Interaction in Crystals for Emission of RADiation) Collaboration at the MAinzer MIkrotron (MAMI, Germany). This paper describes the setup used by the ICE-RAD experiment for the crystals characterization (both in terms of deflection and radiation emission properties): a high precision goniometer is used to align the crystals with the incoming beam, while a silicon based profilometer and an inorganic scintillator reconstruct, respectively, the particle position and the photon spectra after the samples. The crystals manufacturing process and their characterization, the silicon profilometer commissioning at the CERN PS T9 beamline, and the commissioning of the whole setup installed at MAMI are presented.
Copyright/License Publication: AIP Publishing LLC

Corresponding record in: Inspire


 Datensatz erzeugt am 2020-02-27, letzte Änderung am 2020-03-02