| Published Articles | |
| Report number | CERN-ACC-2019-060 |
| Title | Capture and flat-bottom losses in the CERN SPS |
| Author(s) | Schwarz, Markus (CERN) ; Lasheen, Alexandre (CERN) ; Papotti, Giulia (CERN) ; Repond, Joël (CERN) ; Shaposhnikova, Elena (CERN) ; Timko, Helga (CERN) |
| Publication | 2019 |
| Number of pages | 4 |
| In: | 10th International Particle Accelerator Conference, Melbourne, Australia, 19 - 24 May 2019, pp.MOPGW091 |
| DOI | 10.18429/JACoW-IPAC2019-MOPGW091 |
| Subject category | Accelerators and Storage Rings |
| Accelerator/Facility, Experiment | CERN SPS |
| Abstract | Particle losses on the flat bottom of the SPS, the last accelerator in the injector chain of the LHC at CERN, are a strong limitation for reaching the high intensities required by the high-luminosity upgrade of the LHC. Two contributions to these losses are investigated in this paper. The first losses occur during the PS-to-SPS bunch-to-bucket transfer, since the bunch rotation in the PS creates halo particles and the bunch does not completely fit into the SPS RF-bucket. The effect of longitudinal shaving in the PS on the beam transmission was recently tested. At high intensities, further capture losses are caused by beam loading in the main travelling wave RF system of the SPS, which is partially compensated by the LLRF system, in particular by the one-turn delay feedback. While the feedforward system reduces the capture losses, it also increases the losses along the flat bottom due to the RF noise. |
| Copyright/License | Publication: (License: CC-BY-3.0) |
Corresponding record in: Inspire
Element opprettet 2019-10-24, sist endret 2020-09-28
