CERN Accelerating science

Published Articles
Title Lab and test beam results of irradiated silicon sensors with modified ATLAS pixel implantations
Author(s) Weers, Mareike (Dortmund U.) ; Altenheiner, S (Dortmund U.) ; Gisen, A (Dortmund U.) ; Hötting, M (Dortmund U.) ; Hohm, V (Dortmund U.) ; Kröninger, K (Dortmund U.) ; Lönker, J (Dortmund U.) ; Muschak, M (Dortmund U.) ; Raytarowski, A K (Dortmund U.) ; Weingarten, J (Dortmund U.) ; Wizemann, F (Dortmund U.)
Publication 2018
Number of pages 10
In: JINST 13 (2018) C11004
In: 20th International Workshop On Radiation Imaging Detectors, Sundsvall, Sweden, 24 - 28 Jun 2018, pp.C11004
DOI 10.1088/1748-0221/13/11/C11004
Subject category Detectors and Experimental Techniques
Accelerator/Facility, Experiment CERN LHC ; ATLAS
Abstract In Dortmund, planar silicon pixel sensors were designed with modified n+-implantations and produced in n+-in-n sensor technology. Baseline for these new designs was the layout of the IBL planar silicon pixel sensor with a 250 μm × 50 μm pitch. The different implantation shapes are intended to cause electrical field strength maxima to increase charge collection after irradiation and thus increase particle detection efficiency. To test and compare the different pixel designs, the modified pixel designs and the standard IBL design are placed on one sensor which can be read out by a FE-I4. After irradiation with protons and neutrons respectively the performance of several sensors is tested in laboratory and test beam measurements. The presented laboratory results verify that all sensors are fully functional after irradiation. The the test beam measurements show different results for sensors irradiated to the same fluence with neutrons in Sandia compared to sensors irradiated with neutrons in Ljubljana or with protons at CERN PS.

Corresponding record in: Inspire


 Запись создана 2019-07-04, последняя модификация 2019-07-04