002672612 001__ 2672612
002672612 003__ SzGeCERN
002672612 005__ 20190427000658.0
002672612 0247_ $$2DOI$$9JACoW$$a10.18429/JACoW-IPAC2018-THPMF013
002672612 0248_ $$aoai:inspirehep.net:1689919$$pcerncds:CERN:FULLTEXT$$pcerncds:FULLTEXT$$pcerncds:CERN$$qINSPIRE:HEP$$qForCDS
002672612 035__ $$9http://inspirehep.net/oai2d$$aoai:inspirehep.net:1689919$$d2019-04-25T14:34:52Z$$h2019-04-26T06:31:44Z$$mmarcxml
002672612 035__ $$9Inspire$$a1689919
002672612 041__ $$aeng
002672612 100__ $$aPont, [email protected]$$uCELLS - ALBA, LLS
002672612 245__ $$9JACoW$$aThe Stripline Kicker Prototype for the CLIC Damping Rings at ALBA: Installation, Commissioning and Beam Characterisation
002672612 260__ $$c2018
002672612 300__ $$a4 p
002672612 520__ $$9JACoW$$aThe extraction system for the CLIC Damping Rings has very tight specifications. Therefore a full characterisation of the behaviour of the stripline kicker under conditions as close as possible to the expected working conditions will be very valuable. To that end the CLIC stripline has been installed in the ALBA Synchrotron Light Source and has been characterised with beam. Prior to its installation, the effect of the stripline kicker on the machine impedance has been assessed. The installation has required the design of an absorber to screen the stripline from synchrotron radiation and additional BPMs have been installed for a better kick angle determination. The commissioning of the stripline with beam has been performed following closely beam parameters, pressure and temperature. The studies with beam include the determination of the longitudinal and transverse impedance of the kicker*, the field homogeneity when excited with a dc field and the field ripple when pulsed. This contribution reports on the first experience with the stripline kicker for the CLIC DR in the ALBA storage ring and presents the results of the initial beam characterisation.
002672612 540__ $$aCC-BY-3.0$$bJACoW$$uhttp://creativecommons.org/licenses/by/3.0/
002672612 65017 $$2SzGeCERN$$aAccelerators and Storage Rings
002672612 6531_ $$2JACoW$$akicker
002672612 6531_ $$2JACoW$$aextraction
002672612 6531_ $$2JACoW$$astorage-ring
002672612 6531_ $$2JACoW$$asynchrotron
002672612 6531_ $$2JACoW$$aimpedance
002672612 690C_ $$aCERN
002672612 700__ $$aAyala, [email protected]$$uCELLS - ALBA, LLS
002672612 700__ $$aBarnes, Michael$$iINSPIRE-00064621$$jJACoW-00000086$$kORCID:0000-0001-8073-4845$$uCERN
002672612 700__ $$aBelver-Aguilar, [email protected]$$uCERN
002672612 700__ $$aCarlà, [email protected]$$uCELLS - ALBA, LLS
002672612 700__ $$aGünzel, [email protected]$$uCELLS - ALBA, LLS
002672612 700__ $$aIriso, [email protected]$$uCELLS - ALBA, LLS
002672612 700__ $$aMartí, Zeus$$iINSPIRE-00541203$$jJACoW-00004638$$uCELLS - ALBA, LLS
002672612 700__ $$aMonge, [email protected]$$uCELLS - ALBA, LLS
002672612 700__ $$aOlmos, Angel$$iINSPIRE-00355283$$jJACoW-00021364$$uCELLS - ALBA, LLS
002672612 700__ $$aPapaphilippou, Yannis$$jJACoW-00000197$$uCERN
002672612 700__ $$aPérez, Francis$$iINSPIRE-00541509$$jJACoW-00000495$$uCELLS - ALBA, LLS
002672612 700__ $$aQuispe, [email protected]$$uCELLS - ALBA, LLS
002672612 773__ $$cTHPMF013$$qIPAC2018$$wC18-04-29$$y2018
002672612 8564_ $$81476160$$s554869$$uhttp://cds.cern.ch/record/2672612/files/thpmf013.pdf
002672612 960__ $$a13
002672612 962__ $$b2317451$$kTHPMF013$$nvancouver20180429
002672612 980__ $$aARTICLE
002672612 980__ $$aConferencePaper
002672612 999C6 $$a0-2-0-1-0-0-1$$t2018-08-26 12:34:30$$vcontent.pdf;1$$vInvenio/1.1.2.1260-aa76f refextract/1.5.44
002672612 999C5 $$9CURATOR$$adoi:10.18429/JACoW-IPAC2012-TUPPC086$$hY.Papaphilippou et al.$$min Proc. 3rd Int. Particle Accelerator Conf. (IPAC’12), New Orleans, USA, May, pp. 1368-1370, doi:10.18429/JACoW$$o1$$rIPAC-2012-TUPPC086$$tConceptual Design of the CLIC damping rings$$y2012
002672612 999C5 $$01332289$$adoi:10.1103/PhysRevSTAB.17.071003$$hC.Belver-Aguilar, A.Faus-Golfe, F.Toral and M.J.Barnes$$o2$$sPhys.Rev.ST Accel.Beams,17,071003$$tStripline design for the extraction kicker of Compact Linear Collider damping rings$$y2014
002672612 999C5 $$9CURATOR$$adoi:10.18429/JACoW-MEDSI2016-TUPE29$$mR.Monge, J.C.Giraldo, J.Ladrera, M.Llonch, L.Nikitina, M.Pont and M.Quispe, “Integration of a stripline kicker prototype for CLIC project into ALBA Storage Ring”, in Proc. 4th Mechanical Engineering Design of Synchrotron Radiation Equipment and In- strumentation (MEDSI) conference, Barcelona, Spain, September 2016, pp. 230-232, doi:10.18429/JACoW-MEDSI2016-TUPE29$$o3
002672612 999C5 $$01417269$$9CURATOR$$adoi:10.18429/JACoW-IPAC2015-MOPJE027$$hU.Iriso, T.F.Günzel, E. Koukovini-Platia, H. Bartosik, G.Rumolo$$min Proc. 6th Int. Particle Accelerator Conf. (IPAC’15), Richmond, VA, USA, May, pp. 334-337, doi:10.18429/JACoW$$o4$$rIPAC-2015-MOPJE027$$tBeam based impedance characterisation of the ALBA pinger magnet$$y2015
002672612 999C5 $$9CURATOR$$adoi:10.18429/JACoW-IPAC2017-WEPVA098$$mJ.Holma, M.J.Barnes, “Measurements on a 12.5 kV prototype inductive adder for the CLIC DR Extraction Kickers”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC’17), Copenhagen, Denmark, May 2017, pp. 3487-3490, doi:10.18429/JACoW-IPAC2017-WEPVA098$$o5