CERN Accelerating science

Preprints
Report number	FERMILAB-TM-2660-TD
Title	MQXFS1 Quadrupole Fabrication Report
Author(s)	Ambrosio, G (ed.) (Fermilab) ; Anerella, M (Brookhaven Natl. Lab.) ; Bossert, R (Fermilab) ; Cavanna, E (CERN) ; Cheng, D (LBNL, Berkeley) ; Chlachidize, G (Fermilab) ; Cooley, L D (Fermilab) ; Dietderich, D (LBNL, Berkeley) ; Felice, H (LBNL, Berkeley) ; Ferracin, P (ed.) (CERN) ; Ghosh, A (Brookhaven Natl. Lab.) ; Hafalia, R (LBNL, Berkeley) ; Holik, E F (Fermilab) ; Izquierdo Bermudez, S (CERN) ; Juchno, M (CERN) ; Krave, S (Fermilab) ; Marchevsky, M (LBNL, Berkeley) ; Muratore, J (Brookhaven Natl. Lab.) ; Nobrega, F (Fermilab) ; Pan, H (LBNL, Berkeley) ; Perez, J C (CERN) ; Pong, I (LBNL, Berkeley) ; Prestemon, S (LBNL, Berkeley) ; Ravaioli, E (LBNL, Berkeley) ; Sabbi, G L (LBNL, Berkeley) ; Santini, C (Fermilab) ; Schmalzle, J (Brookhaven Natl. Lab.) ; Schmalzle, J (Brookhaven Natl. Lab) ; Stoynev, S (Fermilab) ; Strauss, T (Fermilab) ; Vallone, G (CERN) ; Wanderer, P (Brookhaven Natl. Lab.) ; Wang, X (LBNL, Berkeley) ; Yu, M (Fermilab)
Publication	2017
Collaboration	LARP
Imprint	2017-07-16
Number of pages	41
Note	LARP-Note-US-HiLumi-DocDB-186
DOI	10.2172/1390186
Subject category	Accelerators and Storage Rings
Accelerator/Facility, Experiment	LARP CERN HL-LHC
Abstract	This report presents the fabrication and QC data of MQXFS1, the first short model of the low-beta quadrupoles (MQXF) for the LHC High Luminosity Upgrade. It describes the conductor, the coils, and the structure that make the MQXFS1 magnet. Qualification tests and non-conformities are also presented and discussed. The fabrication of MQXFS1 was started before the finalization of conductor and coil design for MQXF magnets. Two strand design were used (RRP 108/127 and RRP 132/169). Cable and coil cross-sections were “first generation”.
Other source	Inspire